Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (377 commits) ASoC: au1x: PSC-AC97 bugfixes ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128 ALSA: dummy - Add debug proc file ALSA: Add const prefix to proc helper functions ALSA: Re-export snd_pcm_format_name() function ALSA: hda - Use auto model for HP laptops with ALC268 codec ALSA: cs46xx - Fix minimum period size ASoC: Fix WM835x Out4 capture enumeration ALSA: Remove unneeded ifdef from sound/core.h ALSA: Remove struct snd_monitor_file from public sound/core.h ASoC: Remove unuused hw_read_t sound: oxygen: work around MCE when changing volume ALSA: dummy - Fake buffer allocations ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital ASoC: fix pxa2xx-ac97.c breakage ALSA: dummy - Fix the timer calculation in systimer mode ALSA: dummy - Add more description ALSA: dummy - Better jiffies handling ALSA: dummy - Support high-res timer mode ALSA: Release v1.0.21 ...
2026-05-01 15:00:59 -07:00 · 2009-09-11 09:19:35 -07:00
parent a12e4d304c 1110afbe72
commit a9c86d4259
221 changed files with 30756 additions and 7016 deletions
@@ -468,3 +468,27 @@ Why:	cpu_policy_rwsem has a new cleaner definition making it local to
 	cpufreq core and contained inside cpufreq.c. Other dependent
 	drivers should not use it in order to safely avoid lockdep issues.
 Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+----------------------------
+
+What:	sound-slot/service-* module aliases and related clutters in
+	sound/sound_core.c
+When:	August 2010
+Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
+	(14) and requests modules using custom sound-slot/service-*
+	module aliases.  The only benefit of doing this is allowing
+	use of custom module aliases which might as well be considered
+	a bug at this point.  This preemptive claiming prevents
+	alternative OSS implementations.
+
+	Till the feature is removed, the kernel will be requesting
+	both sound-slot/service-* and the standard char-major-* module
+	aliases and allow turning off the pre-claiming selectively via
+	CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
+	kernel parameter.
+
+	After the transition phase is complete, both the custom module
+	aliases and switches to disable it will go away.  This removal
+	will also allow making ALSA OSS emulation independent of
+	sound_core.  The dependency will be broken then too.
+Who:	Tejun Heo <tj@kernel.org>
@@ -60,6 +60,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
    slots	- Reserve the slot index for the given driver.
 		  This option takes multiple strings.		
 		  See "Module Autoloading Support" section for details.
+    debug	- Specifies the debug message level
+		  (0 = disable debug prints, 1 = normal debug messages,
+		   2 = verbose debug messages)
+		  This option appears only when CONFIG_SND_DEBUG=y.
+		  This option can be dynamically changed via sysfs
+		  /sys/modules/snd/parameters/debug file.
  
  Module snd-pcm-oss
  ------------------
@@ -513,6 +519,26 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
    or input, but you may use this module for any application which
    requires a sound card (like RealPlayer).

+    pcm_devs       - Number of PCM devices assigned to each card
+                     (default = 1, up to 4)
+    pcm_substreams - Number of PCM substreams assigned to each PCM
+                     (default = 8, up to 16)
+    hrtimer        - Use hrtimer (=1, default) or system timer (=0)
+    fake_buffer    - Fake buffer allocations (default = 1)
+
+    When multiple PCM devices are created, snd-dummy gives different
+    behavior to each PCM device:
+      0 = interleaved with mmap support
+      1 = non-interleaved with mmap support
+      2 = interleaved without mmap 
+      3 = non-interleaved without mmap
+
+    As default, snd-dummy drivers doesn't allocate the real buffers
+    but either ignores read/write or mmap a single dummy page to all
+    buffer pages, in order to save the resouces.  If your apps need
+    the read/ written buffer data to be consistent, pass fake_buffer=0
+    option.
+
    The power-management is supported.

  Module snd-echo3g
@@ -768,6 +794,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
    bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
 		Passing -1 will make the driver to choose the appropriate
 		value based on the controller chip.
+    patch	- Specifies the early "patch" files to modify the HD-audio
+    		setup before initializing the codecs.  This option is
+		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
+		See HD-Audio.txt for details.
    
    [Single (global) options]
    single_cmd  - Use single immediate commands to communicate with
@@ -114,8 +114,8 @@ ALC662/663/272
  samsung-nc10	Samsung NC10 mini notebook
  auto		auto-config reading BIOS (default)

-ALC882/885
-==========
+ALC882/883/885/888/889
+======================
  3stack-dig	3-jack with SPDIF I/O
  6stack-dig	6-jack digital with SPDIF I/O
  arima		Arima W820Di1
@@ -127,12 +127,8 @@ ALC882/885
  mbp3		Macbook Pro rev3
  imac24	iMac 24'' with jack detection
  w2jc		ASUS W2JC
-  auto		auto-config reading BIOS (default)
-
-ALC883/888
-==========
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
+  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
+  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
  3stack-6ch    3-jack 6-channel
  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
  6stack-dig-demo  6-jack digital for Intel demo board
@@ -140,6 +136,7 @@ ALC883/888
  acer-aspire	Acer Aspire 9810
  acer-aspire-4930g Acer Aspire 4930G
  acer-aspire-6530g Acer Aspire 6530G
+  acer-aspire-7730g Acer Aspire 7730G
  acer-aspire-8930g Acer Aspire 8930G
  medion	Medion Laptops
  medion-md2	Medion MD2
@@ -155,10 +152,13 @@ ALC883/888
  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
  6stack-dell	Dell machines with 6stack (Inspiron 530)
  mitac		Mitac 8252D
+  clevo-m540r	Clevo M540R (6ch + digital)
  clevo-m720	Clevo M720 laptop series
  fujitsu-pi2515 Fujitsu AMILO Pi2515
  fujitsu-xa3530 Fujitsu AMILO XA3530
  3stack-6ch-intel Intel DG33* boards
+  intel-alc889a	Intel IbexPeak with ALC889A
+  intel-x58	Intel DX58 with ALC889
  asus-p5q	ASUS P5Q-EM boards
  mb31		MacBook 3,1
  sony-vaio-tt  Sony VAIO TT
@@ -229,7 +229,7 @@ AD1984
 ======
  basic		default configuration
  thinkpad	Lenovo Thinkpad T61/X61
-  dell		Dell T3400
+  dell_desktop	Dell T3400

 AD1986A
 =======
@@ -258,6 +258,7 @@ Conexant 5045
  laptop-micsense   Laptop with Mic sense (old model fujitsu)
  laptop-hpmicsense Laptop with HP and Mic senses
  benq		Benq R55E
+  laptop-hp530	HP 530 laptop
  test		for testing/debugging purpose, almost all controls
 		can be adjusted.  Appearing only when compiled with
 		$CONFIG_SND_DEBUG=y
@@ -278,9 +279,16 @@ Conexant 5051
  hp-dv6736	HP dv6736
  lenovo-x200	Lenovo X200 laptop

+Conexant 5066
+=============
+  laptop	Basic Laptop config (default)
+  dell-laptop	Dell laptops
+  olpc-xo-1_5	OLPC XO 1.5
+
 STAC9200
 ========
  ref		Reference board
+  oqo		OQO Model 2
  dell-d21	Dell (unknown)
  dell-d22	Dell (unknown)
  dell-d23	Dell (unknown)
@@ -368,10 +376,12 @@ STAC92HD73*
 ===========
  ref		Reference board
  no-jd		BIOS setup but without jack-detection
+  intel		Intel DG45* mobos
  dell-m6-amic	Dell desktops/laptops with analog mics
  dell-m6-dmic	Dell desktops/laptops with digital mics
  dell-m6	Dell desktops/laptops with both type of mics
  dell-eq	Dell desktops/laptops
+  alienware	Alienware M17x
  auto		BIOS setup (default)

 STAC92HD83*
@@ -385,3 +395,8 @@ STAC9872
 ========
  vaio		VAIO laptop without SPDIF
  auto		BIOS setup (default)
+
+Cirrus Logic CS4206/4207
+========================
+  mbp55		MacBook Pro 5,5
+  auto		BIOS setup (default)
@@ -138,6 +138,10 @@ override the BIOS setup or to provide more comprehensive features.
 The driver checks PCI SSID and looks through the static configuration
 table until any matching entry is found.  If you have a new machine,
 you may see a message like below:
+------------------------------------------------------------------------
+    hda_codec: ALC880: BIOS auto-probing.
+------------------------------------------------------------------------
+Meanwhile, in the earlier versions, you would see a message like:
 ------------------------------------------------------------------------
    hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
 ------------------------------------------------------------------------
@@ -403,6 +407,66 @@ re-configure based on that state, run like below:
 ------------------------------------------------------------------------


+Early Patching
+~~~~~~~~~~~~~~
+When CONFIG_SND_HDA_PATCH_LOADER=y is set, you can pass a "patch" as a
+firmware file for modifying the HD-audio setup before initializing the
+codec.  This can work basically like the reconfiguration via sysfs in
+the above, but it does it before the first codec configuration.
+
+A patch file is a plain text file which looks like below:
+
+------------------------------------------------------------------------
+  [codec]
+  0x12345678 0xabcd1234 2
+
+  [model]
+  auto
+
+  [pincfg]
+  0x12 0x411111f0
+
+  [verb]
+  0x20 0x500 0x03
+  0x20 0x400 0xff
+
+  [hint]
+  hp_detect = yes
+------------------------------------------------------------------------
+
+The file needs to have a line `[codec]`.  The next line should contain
+three numbers indicating the codec vendor-id (0x12345678 in the
+example), the codec subsystem-id (0xabcd1234) and the address (2) of
+the codec.  The rest patch entries are applied to this specified codec
+until another codec entry is given.
+
+The `[model]` line allows to change the model name of the each codec.
+In the example above, it will be changed to model=auto.
+Note that this overrides the module option.
+
+After the `[pincfg]` line, the contents are parsed as the initial
+default pin-configurations just like `user_pin_configs` sysfs above.
+The values can be shown in user_pin_configs sysfs file, too.
+
+Similarly, the lines after `[verb]` are parsed as `init_verbs`
+sysfs entries, and the lines after `[hint]` are parsed as `hints`
+sysfs entries, respectively.
+
+The hd-audio driver reads the file via request_firmware().  Thus,
+a patch file has to be located on the appropriate firmware path,
+typically, /lib/firmware.  For example, when you pass the option
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
+present.
+
+The patch module option is specific to each card instance, and you
+need to give one file name for each instance, separated by commas.
+For example, if you have two cards, one for an on-board analog and one 
+for an HDMI video board, you may pass patch option like below:
+------------------------------------------------------------------------
+    options snd-hda-intel patch=on-board-patch,hdmi-patch
+------------------------------------------------------------------------
+
+
 Power-Saving
 ~~~~~~~~~~~~
 The power-saving is a kind of auto-suspend of the device.  When the
@@ -128,6 +128,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -136,6 +137,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x3FF,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -144,6 +146,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -152,6 +155,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -160,6 +164,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -3,10 +3,12 @@

 #include <sound/core.h>
 #include <sound/pcm.h>
+#include <sound/ac97_codec.h>

 /*
 * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
 *              a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data

 * reset_gpio should only be specified for pxa27x CPUs where a silicon
 * bug prevents correct operation of the reset line. If not specified,
@@ -20,6 +22,7 @@ typedef struct {
 	void (*resume)(void *);
 	void *priv;
 	int reset_gpio;
+	void *codec_pdata[AC97_BUS_MAX_DEVICES];
 } pxa2xx_audio_ops_t;

 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
@@ -1127,6 +1127,11 @@ int omap_dma_running(void)
 void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -1149,6 +1154,11 @@ EXPORT_SYMBOL(omap_dma_link_lch);
 void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -134,6 +134,11 @@
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
 #define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_THRSH2	0x90
+#define OMAP_MCBSP_REG_THRSH1	0x94
+#define OMAP_MCBSP_REG_IRQST	0xA0
+#define OMAP_MCBSP_REG_IRQEN	0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0

@@ -249,8 +254,27 @@
 #define RDISABLE		0x0001

 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)	((value)<<8)
+#define SIDLEMODE(value)	((value)<<3)
+#define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002

+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT		0
+#define MCBSP_DMA_MODE_THRESHOLD	1
+#define MCBSP_DMA_MODE_FRAME		2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN		0x4000
+#define XRDYEN			0x0400
+#define XEOFEN			0x0200
+#define XFSXEN			0x0100
+#define XSYNCERREN		0x0080
+#define RRDYEN			0x0008
+#define REOFEN			0x0004
+#define RFSREN			0x0002
+#define RSYNCERREN		0x0001
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -344,6 +368,9 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 buffer_size;
+#endif
 };

 struct omap_mcbsp {
@@ -377,6 +404,11 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+	int dma_op_mode;
+	u16 max_tx_thres;
+	u16 max_rx_thres;
+#endif
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
@@ -385,10 +417,25 @@ int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);

@@ -198,6 +198,170 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);

+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	int dma_op_mode;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Enable wakup behavior, smart idle and all wakeups
+	 * REVISIT: some wakeups may be unnecessary
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+
+		spin_lock_irq(&mcbsp->lock);
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+					CLOCKACTIVITY(0x02));
+			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+					XRDYEN | RRDYEN);
+		} else {
+			syscon |= SIDLEMODE(0x01);
+		}
+		spin_unlock_irq(&mcbsp->lock);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+	}
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Disable wakup behavior, smart idle and all wakeups
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		/*
+		 * HW bug workaround - If no_idle mode is taken, we need to
+		 * go to smart_idle before going to always_idle, or the
+		 * device will not hit retention anymore.
+		 */
+		syscon |= SIDLEMODE(0x02);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		syscon &= ~(SIDLEMODE(0x03));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+	}
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+#endif
+
 /*
 * We can choose between IRQ based or polled IO.
 * This needs to be called before omap_mcbsp_request().
@@ -257,6 +421,9 @@ int omap_mcbsp_request(unsigned int id)
 	clk_enable(mcbsp->iclk);
 	clk_enable(mcbsp->fclk);

+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_request(mcbsp);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -305,6 +472,9 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);

+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);

@@ -328,14 +498,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);

 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
 */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;

 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +519,58 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;

-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}

 	/* Enable transmitter and receiver */
+	tx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);

+	rx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);

-	udelay(100);
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);

-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		/* Release the transmitter and receiver */
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}

 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);

-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;

 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -385,16 +582,33 @@ void omap_mcbsp_stop(unsigned int id)
 	io_base = mcbsp->io_base;

 	/* Reset transmitter */
+	tx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);

 	/* Reset receiver */
+	rx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w |= (tx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);

-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);

@@ -883,6 +1097,149 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);

+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = strict_strtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	const char * const *s;
+	int i = 0;
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
+
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+	mcbsp->dma_op_mode = i;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
+static const struct attribute *additional_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
+};
+
+static inline int __devinit omap_additional_add(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devexit omap_additional_remove(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+	if (cpu_is_omap34xx()) {
+		mcbsp->max_tx_thres = max_thres(mcbsp);
+		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
+		 * for mcbsp2 instances.
+		 */
+		if (omap_additional_add(mcbsp->dev))
+			dev_warn(mcbsp->dev,
+				"Unable to create additional controls\n");
+	} else {
+		mcbsp->max_tx_thres = -EINVAL;
+		mcbsp->max_rx_thres = -EINVAL;
+	}
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx())
+		omap_additional_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
 /*
 * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
 * 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -953,6 +1310,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dev = &pdev->dev;
 	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
+
+	/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+	omap34xx_device_init(mcbsp);
+
 	return 0;

 err_fclk:
@@ -976,6 +1337,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);

+		omap34xx_device_exit(mcbsp);
+
 		clk_disable(mcbsp->fclk);
 		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
@@ -33,6 +33,11 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)

+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
 #define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
 #define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)

@@ -238,8 +238,10 @@ int alloc_chrdev_region(dev_t *dev, unsigned baseminor, unsigned count,
 }

 /**
- * register_chrdev() - Register a major number for character devices.
+ * __register_chrdev() - create and register a cdev occupying a range of minors
 * @major: major device number or 0 for dynamic allocation
+ * @baseminor: first of the requested range of minor numbers
+ * @count: the number of minor numbers required
 * @name: name of this range of devices
 * @fops: file operations associated with this devices
 *
@@ -255,19 +257,17 @@ int alloc_chrdev_region(dev_t *dev, unsigned baseminor, unsigned count,
 * /dev. It only helps to keep track of the different owners of devices. If
 * your module name has only one type of devices it's ok to use e.g. the name
 * of the module here.
- *
- * This function registers a range of 256 minor numbers. The first minor number
- * is 0.
 */
-int register_chrdev(unsigned int major, const char *name,
-		    const struct file_operations *fops)
+int __register_chrdev(unsigned int major, unsigned int baseminor,
+		      unsigned int count, const char *name,
+		      const struct file_operations *fops)
 {
 	struct char_device_struct *cd;
 	struct cdev *cdev;
 	char *s;
 	int err = -ENOMEM;

-	cd = __register_chrdev_region(major, 0, 256, name);
+	cd = __register_chrdev_region(major, baseminor, count, name);
 	if (IS_ERR(cd))
 		return PTR_ERR(cd);
 	
@@ -281,7 +281,7 @@ int register_chrdev(unsigned int major, const char *name,
 	for (s = strchr(kobject_name(&cdev->kobj),'/'); s; s = strchr(s, '/'))
 		*s = '!';
 		
-	err = cdev_add(cdev, MKDEV(cd->major, 0), 256);
+	err = cdev_add(cdev, MKDEV(cd->major, baseminor), count);
 	if (err)
 		goto out;

@@ -291,7 +291,7 @@ int register_chrdev(unsigned int major, const char *name,
 out:
 	kobject_put(&cdev->kobj);
 out2:
-	kfree(__unregister_chrdev_region(cd->major, 0, 256));
+	kfree(__unregister_chrdev_region(cd->major, baseminor, count));
 	return err;
 }

@@ -317,10 +317,23 @@ void unregister_chrdev_region(dev_t from, unsigned count)
 	}
 }

-void unregister_chrdev(unsigned int major, const char *name)
+/**
+ * __unregister_chrdev - unregister and destroy a cdev
+ * @major: major device number
+ * @baseminor: first of the range of minor numbers
+ * @count: the number of minor numbers this cdev is occupying
+ * @name: name of this range of devices
+ *
+ * Unregister and destroy the cdev occupying the region described by
+ * @major, @baseminor and @count.  This function undoes what
+ * __register_chrdev() did.
+ */
+void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+			 unsigned int count, const char *name)
 {
 	struct char_device_struct *cd;
-	cd = __unregister_chrdev_region(major, 0, 256);
+
+	cd = __unregister_chrdev_region(major, baseminor, count);
 	if (cd && cd->cdev)
 		cdev_del(cd->cdev);
 	kfree(cd);
@@ -569,6 +582,6 @@ EXPORT_SYMBOL(cdev_alloc);
 EXPORT_SYMBOL(cdev_del);
 EXPORT_SYMBOL(cdev_add);
 EXPORT_SYMBOL(cdev_index);
-EXPORT_SYMBOL(register_chrdev);
-EXPORT_SYMBOL(unregister_chrdev);
+EXPORT_SYMBOL(__register_chrdev);
+EXPORT_SYMBOL(__unregister_chrdev);
 EXPORT_SYMBOL(directly_mappable_cdev_bdi);
@@ -1997,12 +1997,25 @@ extern void bd_release_from_disk(struct block_device *, struct gendisk *);
 #define CHRDEV_MAJOR_HASH_SIZE	255
 extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
 extern int register_chrdev_region(dev_t, unsigned, const char *);
-extern int register_chrdev(unsigned int, const char *,
-			   const struct file_operations *);
-extern void unregister_chrdev(unsigned int, const char *);
+extern int __register_chrdev(unsigned int major, unsigned int baseminor,
+			     unsigned int count, const char *name,
+			     const struct file_operations *fops);
+extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
+				unsigned int count, const char *name);
 extern void unregister_chrdev_region(dev_t, unsigned);
 extern void chrdev_show(struct seq_file *,off_t);

+static inline int register_chrdev(unsigned int major, const char *name,
+				  const struct file_operations *fops)
+{
+	return __register_chrdev(major, 0, 256, name, fops);
+}
+
+static inline void unregister_chrdev(unsigned int major, const char *name)
+{
+	__unregister_chrdev(major, 0, 256, name);
+}
+
 /* fs/block_dev.c */
 #define BDEVNAME_SIZE	32	/* Largest string for a blockdev identifier */
 #define BDEVT_SIZE	10	/* Largest string for MAJ:MIN for blkdev */
@@ -23,7 +23,7 @@
 */
 #define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
 #define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
-#define NR_LDISCS		19
+#define NR_LDISCS		20

 /* line disciplines */
 #define N_TTY		0
@@ -47,6 +47,8 @@
 #define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
 #define N_PPS		18	/* Pulse per Second */

+#define N_V253		19	/* Codec control over voice modem */
+
 /*
 * This character is the same as _POSIX_VDISABLE: it cannot be used as
 * a c_cc[] character, but indicates that a particular special character
@@ -32,6 +32,9 @@
 #include "control.h"
 #include "info.h"

+/* maximum number of devices on the AC97 bus */
+#define	AC97_BUS_MAX_DEVICES	4
+
 /*
 *  AC'97 codec registers
 */
@@ -642,4 +645,10 @@ int snd_ac97_pcm_double_rate_rules(struct snd_pcm_runtime *runtime);
 /* ad hoc AC97 device driver access */
 extern struct bus_type ac97_bus_type;

+/* AC97 platform_data adding function */
+static inline void snd_ac97_dev_add_pdata(struct snd_ac97 *ac97, void *data)
+{
+	ac97->dev.platform_data = data;
+}
+
 #endif /* __SOUND_AC97_CODEC_H */
@@ -138,7 +138,7 @@ struct snd_hwdep_dsp_image {
 *                                                                           *
 *****************************************************************************/

-#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 9)
+#define SNDRV_PCM_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 10)

 typedef unsigned long snd_pcm_uframes_t;
 typedef signed long snd_pcm_sframes_t;
@@ -93,15 +93,6 @@ struct snd_device {

 #define snd_device(n) list_entry(n, struct snd_device, list)

-/* monitor files for graceful shutdown (hotplug) */
-
-struct snd_monitor_file {
-	struct file *file;
-	const struct file_operations *disconnected_f_op;
-	struct list_head shutdown_list;	/* still need to shutdown */
-	struct list_head list;	/* link of monitor files */
-};
-
 /* main structure for soundcard */

 struct snd_card {
@@ -311,9 +302,7 @@ int snd_component_add(struct snd_card *card, const char *component);
 int snd_card_file_add(struct snd_card *card, struct file *file);
 int snd_card_file_remove(struct snd_card *card, struct file *file);

-#ifndef snd_card_set_dev
 #define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
-#endif

 /* device.c */

@@ -340,18 +329,17 @@ unsigned int snd_dma_pointer(unsigned long dma, unsigned int size);
 struct resource;
 void release_and_free_resource(struct resource *res);

-#ifdef CONFIG_SND_VERBOSE_PRINTK
-void snd_verbose_printk(const char *file, int line, const char *format, ...)
-     __attribute__ ((format (printf, 3, 4)));
-#endif
-#if defined(CONFIG_SND_DEBUG) && defined(CONFIG_SND_VERBOSE_PRINTK)
-void snd_verbose_printd(const char *file, int line, const char *format, ...)
-     __attribute__ ((format (printf, 3, 4)));
-#endif
-
 /* --- */

-#ifdef CONFIG_SND_VERBOSE_PRINTK
+#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
+void __snd_printk(unsigned int level, const char *file, int line,
+		  const char *format, ...)
+     __attribute__ ((format (printf, 4, 5)));
+#else
+#define __snd_printk(level, file, line, format, args...) \
+	printk(format, ##args)
+#endif
+
 /**
 * snd_printk - printk wrapper
 * @fmt: format string
@@ -360,15 +348,9 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...)
 * when configured with CONFIG_SND_VERBOSE_PRINTK.
 */
 #define snd_printk(fmt, args...) \
-	snd_verbose_printk(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printk(fmt, args...) \
-	printk(fmt ,##args)
-#endif
+	__snd_printk(0, __FILE__, __LINE__, fmt, ##args)

 #ifdef CONFIG_SND_DEBUG
-
-#ifdef CONFIG_SND_VERBOSE_PRINTK
 /**
 * snd_printd - debug printk
 * @fmt: format string
@@ -377,11 +359,7 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...)
 * Ignored when CONFIG_SND_DEBUG is not set.
 */
 #define snd_printd(fmt, args...) \
-	snd_verbose_printd(__FILE__, __LINE__, fmt ,##args)
-#else
-#define snd_printd(fmt, args...) \
-	printk(fmt ,##args)
-#endif
+	__snd_printk(1, __FILE__, __LINE__, fmt, ##args)

 /**
 * snd_BUG - give a BUG warning message and stack trace
@@ -428,9 +406,10 @@ static inline int __snd_bug_on(int cond)
 * Works like snd_printk() for debugging purposes.
 * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set.
 */
-#define snd_printdd(format, args...) snd_printk(format, ##args)
+#define snd_printdd(format, args...) \
+	__snd_printk(2, __FILE__, __LINE__, format, ##args)
 #else
-#define snd_printdd(format, args...) /* nothing */
+#define snd_printdd(format, args...)	do { } while (0)
 #endif


@@ -438,12 +417,10 @@ static inline int __snd_bug_on(int cond)

 /* for easier backward-porting */
 #if defined(CONFIG_GAMEPORT) || defined(CONFIG_GAMEPORT_MODULE)
-#ifndef gameport_set_dev_parent
 #define gameport_set_dev_parent(gp,xdev) ((gp)->dev.parent = (xdev))
 #define gameport_set_port_data(gp,r) ((gp)->port_data = (r))
 #define gameport_get_port_data(gp) (gp)->port_data
 #endif
-#endif

 /* PCI quirk list helper */
 struct snd_pci_quirk {
@@ -110,13 +110,13 @@ void snd_card_info_read_oss(struct snd_info_buffer *buffer);
 static inline void snd_card_info_read_oss(struct snd_info_buffer *buffer) {}
 #endif

-int snd_iprintf(struct snd_info_buffer *buffer, char *fmt, ...) \
+int snd_iprintf(struct snd_info_buffer *buffer, const char *fmt, ...) \
 				__attribute__ ((format (printf, 2, 3)));
 int snd_info_init(void);
 int snd_info_done(void);

 int snd_info_get_line(struct snd_info_buffer *buffer, char *line, int len);
-char *snd_info_get_str(char *dest, char *src, int len);
+const char *snd_info_get_str(char *dest, const char *src, int len);
 struct snd_info_entry *snd_info_create_module_entry(struct module *module,
 					       const char *name,
 					       struct snd_info_entry *parent);
@@ -47,7 +47,11 @@ struct snd_dma_device {
 #define SNDRV_DMA_TYPE_UNKNOWN		0	/* not defined */
 #define SNDRV_DMA_TYPE_CONTINUOUS	1	/* continuous no-DMA memory */
 #define SNDRV_DMA_TYPE_DEV		2	/* generic device continuous */
+#ifdef CONFIG_SND_DMA_SGBUF
 #define SNDRV_DMA_TYPE_DEV_SG		3	/* generic device SG-buffer */
+#else
+#define SNDRV_DMA_TYPE_DEV_SG	SNDRV_DMA_TYPE_DEV /* no SG-buf support */
+#endif

 /*
 * info for buffer allocation
@@ -60,6 +64,7 @@ struct snd_dma_buffer {
 	void *private_data;	/* private for allocator; don't touch */
 };

+#ifdef CONFIG_SND_DMA_SGBUF
 /*
 * Scatter-Gather generic device pages
 */
@@ -107,6 +112,7 @@ static inline void *snd_sgbuf_get_ptr(struct snd_sg_buf *sgbuf, size_t offset)
 {
 	return sgbuf->table[offset >> PAGE_SHIFT].buf + offset % PAGE_SIZE;
 }
+#endif /* CONFIG_SND_DMA_SGBUF */

 /* allocate/release a buffer */
 int snd_dma_alloc_pages(int type, struct device *dev, size_t size,
@@ -902,6 +902,7 @@ int snd_pcm_lib_preallocate_pages_for_all(struct snd_pcm *pcm,
 int snd_pcm_lib_malloc_pages(struct snd_pcm_substream *substream, size_t size);
 int snd_pcm_lib_free_pages(struct snd_pcm_substream *substream);

+#ifdef CONFIG_SND_DMA_SGBUF
 /*
 * SG-buffer handling
 */
@@ -927,6 +928,28 @@ struct page *snd_pcm_sgbuf_ops_page(struct snd_pcm_substream *substream,
 unsigned int snd_pcm_sgbuf_get_chunk_size(struct snd_pcm_substream *substream,
 					  unsigned int ofs, unsigned int size);

+#else /* !SND_DMA_SGBUF */
+/*
+ * fake using a continuous buffer
+ */
+static inline dma_addr_t
+snd_pcm_sgbuf_get_addr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	return substream->runtime->dma_addr + ofs;
+}
+
+static inline void *
+snd_pcm_sgbuf_get_ptr(struct snd_pcm_substream *substream, unsigned int ofs)
+{
+	return substream->runtime->dma_area + ofs;
+}
+
+#define snd_pcm_sgbuf_ops_page	NULL
+
+#define snd_pcm_sgbuf_get_chunk_size(subs, ofs, size)	(size)
+
+#endif /* SND_DMA_SGBUF */
+
 /* handle mmap counter - PCM mmap callback should handle this counter properly */
 static inline void snd_pcm_mmap_data_open(struct vm_area_struct *area)
 {
@@ -965,4 +988,6 @@ static inline void snd_pcm_limit_isa_dma_size(int dma, size_t *max)

 #define PCM_RUNTIME_CHECK(sub) snd_BUG_ON(!(sub) || !(sub)->runtime)

+const char *snd_pcm_format_name(snd_pcm_format_t format);
+
 #endif /* __SOUND_PCM_H */
--- a/Show More
+++ b/Show More