apfs/linux-apfs
0
0
Fork 0
mirror of https://github.com/linux-apfs/linux-apfs.git synced 2026-05-01 15:00:59 -07:00
Code Issues Packages Projects Releases Wiki Activity

Merge commit '67dd8f35c2d8ed80f26c9654b474cffc11c6674d' into patchwork

Browse Source 
* .: (268 commits)
  Linux 3.16-rc6
  um: segv: Save regs only in case of a kernel mode fault
  um: Fix hung task in fix_range_common()
  um: Ensure that a stub page cannot get unmapped
  Revert "um: Fix wait_stub_done() error handling"
  btrfs: test for valid bdev before kobj removal in btrfs_rm_device
  Btrfs: fix abnormal long waiting in fsync
  random: check for increase of entropy_count because of signed conversion
  ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
  ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
  ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
  ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
  ARM: at91: at91sam9x5: correct typo error for ohci clock
  irqchip: gic: Fix core ID calculation when topology is read from DT
  GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
  GFS2: memcontrol: Spelling s/invlidate/invalidate/
  GFS2: Allow caching of glocks for flock
  GFS2: Allow flocks to use normal glock dq rather than dq_wait
  GFS2: replace count*size kzalloc by kcalloc
  GFS2: Use GFP_NOFS when allocating glocks
  ...

Conflicts:
	drivers/media/dvb-frontends/si2168.c
	drivers/media/dvb-frontends/si2168_priv.h
	drivers/media/tuners/si2157.c
This commit is contained in:
Mauro Carvalho Chehab
2014-07-22 02:03:59 -03:00
parent d352bcc990 67dd8f35c2
commit a733291d69
277 changed files with 2448 additions and 1574 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/acpi/enumeration.txt
-6
View File
@@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and
configuring GPIOs it can get its ACPI handle and extract this information
from ACPI tables.
Currently the kernel is not able to automatically determine from which ACPI
device it should make the corresponding platform device so we need to add
the ACPI device explicitly to acpi_platform_device_ids list defined in
drivers/acpi/acpi_platform.c. This limitation is only for the platform
devices, SPI and I2C devices are created automatically as described below.
DMA support
~~~~~~~~~~~
DMA controllers enumerated via ACPI should be registered in the system to
Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+4 -2
View File
@@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined
under node /cpus/cpu@0.
Required properties:
- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
for details
- None
Optional properties:
- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
details. OPPs *must* be supplied either via DT, i.e. this property, or
populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
Documentation/kernel-parameters.txt
+7 -1
View File
@@ -2790,6 +2790,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
leaf rcu_node structure. Useful for very large
systems.
rcutree.jiffies_till_sched_qs= [KNL]
Set required age in jiffies for a
given grace period before RCU starts
soliciting quiescent-state help from
rcu_note_context_switch().
rcutree.jiffies_till_first_fqs= [KNL]
Set delay from grace-period initialization to
first attempt to force quiescent states.
@@ -3526,7 +3532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
the allocated input device; If set to 0, video driver
will only send out the event without touching backlight
brightness level.
default: 0
default: 1
virtio_mmio.device=
[VMMIO] Memory mapped virtio (platform) device.
MAINTAINERS
+11 -3
View File
@@ -156,7 +156,6 @@ F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
M: Realtek linux nic maintainers <nic_swsd@realtek.com>
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
@@ -4521,8 +4520,7 @@ S: Supported
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Alexander Aring <alex.aring@gmail.com>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
@@ -8032,6 +8030,16 @@ F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
SERIAL ATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
Makefile
+1 -1
View File
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
arch/arm/Kconfig
+1
View File
@@ -6,6 +6,7 @@ config ARM
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
arch/arm/boot/dts/at91sam9n12.dtsi
+1 -1
View File
@@ -925,7 +925,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
arch/arm/boot/dts/at91sam9x5.dtsi
+2 -2
View File
@@ -1124,6 +1124,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
clocks = <&pwm_clk>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1155,8 +1156,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
<&uhpck>;
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
arch/arm/mach-exynos/hotplug.c
+6 -4
View File
@@ -40,15 +40,17 @@ static inline void cpu_leave_lowpower(void)
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
{
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
for (;;) {
/* make cpu1 to be turned off at next WFI command */
if (cpu == 1)
exynos_cpu_power_down(cpu);
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
wfi();
if (pen_release == cpu_logical_map(cpu)) {
if (pen_release == core_id) {
/*
* OK, proper wakeup, we're done
*/
arch/arm/mach-exynos/platsmp.c
+19 -15
View File
@@ -90,7 +90,8 @@ static void exynos_secondary_init(unsigned int cpu)
static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
unsigned long phys_cpu = cpu_logical_map(cpu);
u32 mpidr = cpu_logical_map(cpu);
u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
int ret = -ENOSYS;
/*
@@ -104,17 +105,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*
* Note that "pen_release" is the hardware CPU ID, whereas
* Note that "pen_release" is the hardware CPU core ID, whereas
* "cpu" is Linux's internal ID.
*/
write_pen_release(phys_cpu);
write_pen_release(core_id);
if (!exynos_cpu_power_state(cpu)) {
exynos_cpu_power_up(cpu);
if (!exynos_cpu_power_state(core_id)) {
exynos_cpu_power_up(core_id);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
while (exynos_cpu_power_state(core_id)
!= S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -145,20 +147,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
* Try to set boot address using firmware first
* and fall back to boot register if it fails.
*/
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
goto fail;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg)) {
ret = PTR_ERR(boot_reg);
goto fail;
}
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
call_firmware_op(cpu_boot, phys_cpu);
call_firmware_op(cpu_boot, core_id);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
@@ -227,22 +229,24 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
* boot register if it fails.
*/
for (i = 1; i < max_cpus; ++i) {
unsigned long phys_cpu;
unsigned long boot_addr;
u32 mpidr;
u32 core_id;
int ret;
phys_cpu = cpu_logical_map(i);
mpidr = cpu_logical_map(i);
core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
boot_addr = virt_to_phys(exynos4_secondary_startup);
ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr);
ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr);
if (ret && ret != -ENOSYS)
break;
if (ret == -ENOSYS) {
void __iomem *boot_reg = cpu_boot_reg(phys_cpu);
void __iomem *boot_reg = cpu_boot_reg(core_id);
if (IS_ERR(boot_reg))
break;
__raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
__raw_writel(boot_addr, cpu_boot_reg(core_id));
}
}
}
arch/arm/mach-imx/clk-imx6q.c
+2 -2
View File
@@ -70,7 +70,7 @@ static const char *cko_sels[] = { "cko1", "cko2", };
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
"pcie_ref", "sata_ref",
"pcie_ref_125m", "sata_ref_100m",
};
enum mx6q_clks {
@@ -491,7 +491,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
arch/arm/mach-mvebu/coherency.c
+5 -1
View File
@@ -292,6 +292,10 @@ static struct notifier_block mvebu_hwcc_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static struct notifier_block mvebu_hwcc_pci_nb = {
.notifier_call = mvebu_hwcc_notifier,
};
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
@@ -427,7 +431,7 @@ static int __init coherency_pci_init(void)
{
if (coherency_available())
bus_register_notifier(&pci_bus_type,
&mvebu_hwcc_nb);
&mvebu_hwcc_pci_nb);
return 0;
}
arch/arm/mach-mvebu/headsmp-a9.S
+8 -1
View File
@@ -15,6 +15,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
__CPUINIT
#define CPU_RESUME_ADDR_REG 0xf10182d4
@@ -22,13 +24,18 @@
.global armada_375_smp_cpu1_enable_code_end
armada_375_smp_cpu1_enable_code_start:
ldr r0, [pc, #4]
ARM_BE8(setend be)
adr r0, 1f
ldr r0, [r0]
ldr r1, [r0]
ARM_BE8(rev r1, r1)
mov pc, r1
1:
.word CPU_RESUME_ADDR_REG
armada_375_smp_cpu1_enable_code_end:
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
arch/arm/mach-mvebu/pmsu.c
+5 -5
View File
@@ -201,12 +201,12 @@ static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle)
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, %0, c1, c0, 0 \n\t"
"tst %0, #(1 << 2) \n\t"
"orreq %0, %0, #(1 << 2) \n\t"
"mcreq p15, 0, %0, c1, c0, 0 \n\t"
"mrc p15, 0, r0, c1, c0, 0 \n\t"
"tst r0, #(1 << 2) \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
: : "r" (0));
: : : "r0");
pr_warn("Failed to suspend the system\n");
arch/arm64/Kconfig
+1
View File
@@ -4,6 +4,7 @@ config ARM64
select ARCH_HAS_OPP
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select ARCH_WANT_FRAME_POINTERS
arch/arm64/kernel/efi-stub.c
-2
View File
@@ -12,8 +12,6 @@
#include <linux/efi.h>
#include <linux/libfdt.h>
#include <asm/sections.h>
#include <generated/compile.h>
#include <generated/utsrelease.h>
/*
* AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from
arch/powerpc/Kconfig
+1
View File
@@ -145,6 +145,7 @@ config PPC
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
select HAVE_ARCH_AUDITSYSCALL
select ARCH_SUPPORTS_ATOMIC_RMW
config GENERIC_CSUM
def_bool CPU_LITTLE_ENDIAN
arch/powerpc/include/asm/kvm_book3s_64.h
+17 -2
View File
@@ -198,8 +198,10 @@ static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
return rb;
}
static inline unsigned long hpte_page_size(unsigned long h, unsigned long l)
static inline unsigned long __hpte_page_size(unsigned long h, unsigned long l,
bool is_base_size)
{
int size, a_psize;
/* Look at the 8 bit LP value */
unsigned int lp = (l >> LP_SHIFT) & ((1 << LP_BITS) - 1);
@@ -214,14 +216,27 @@ static inline unsigned long hpte_page_size(unsigned long h, unsigned long l)
continue;
a_psize = __hpte_actual_psize(lp, size);
if (a_psize != -1)
if (a_psize != -1) {
if (is_base_size)
return 1ul << mmu_psize_defs[size].shift;
return 1ul << mmu_psize_defs[a_psize].shift;
}
}
}
return 0;
}
static inline unsigned long hpte_page_size(unsigned long h, unsigned long l)
{
return __hpte_page_size(h, l, 0);
}
static inline unsigned long hpte_base_page_size(unsigned long h, unsigned long l)
{
return __hpte_page_size(h, l, 1);
}
static inline unsigned long hpte_rpn(unsigned long ptel, unsigned long psize)
{
return ((ptel & HPTE_R_RPN) & ~(psize - 1)) >> PAGE_SHIFT;
arch/powerpc/include/asm/ppc_asm.h
+2
View File
@@ -277,6 +277,8 @@ n:
.globl n; \
n:
#define _GLOBAL_TOC(name) _GLOBAL(name)
#define _KPROBE(n) \
.section ".kprobes.text","a"; \
.globl n; \
arch/powerpc/kvm/book3s_64_mmu_hv.c
+1 -1
View File
@@ -1562,7 +1562,7 @@ static ssize_t kvm_htab_write(struct file *file, const char __user *buf,
goto out;
}
if (!rma_setup && is_vrma_hpte(v)) {
unsigned long psize = hpte_page_size(v, r);
unsigned long psize = hpte_base_page_size(v, r);
unsigned long senc = slb_pgsize_encoding(psize);
unsigned long lpcr;

Some files were not shown because too many files have changed in this diff Show More