Merge branch 'linus' into timers/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

.mailmap

@@ -158,6 +158,8 @@ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/stable/sysfs-devices

@@ -1,7 +1,7 @@
 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:

Documentation/PCI/pci.txt

@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
 
 The ID table is an array of struct pci_device_id entries ending with an
 all-zero entry.  Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
 
 Each entry consists of:
 

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,6 +16,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -23,6 +28,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

Documentation/devicetree/bindings/serial/8250.txt

@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};

Documentation/filesystems/overlayfs.txt

@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
 moves it over to the old name.  The new file may be on a different
 filesystem, so both st_dev and st_ino of the file may change.
 
-Any open files referring to this inode will access the old data and
-metadata.  Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
 
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
 
 If a file with multiple hard links is copied up, then this will
 "break" the link.  Changes will not be propagated to other names

Documentation/networking/dsa/dsa.txt

@@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
 TODO
 ====
 
-The platform device problem
----------------------------
-DSA is currently implemented as a platform device driver which is far from ideal
-as was discussed in this thread:
-
-http://permalink.gmane.org/gmane.linux.network/329848
-
-This basically prevents the device driver model to be properly used and applied,
-and support non-MDIO, non-MMIO Ethernet connected switches.
-
-Another problem with the platform device driver approach is that it prevents the
-use of a modular switch drivers build due to a circular dependency, illustrated
-here:
-
-http://comments.gmane.org/gmane.linux.network/345803
-
-Attempts of reworking this has been done here:
-
-https://lwn.net/Articles/643149/
-
 Making SWITCHDEV and DSA converge towards an unified codebase
 -------------------------------------------------------------
 

Documentation/powerpc/transactional_memory.txt

@@ -167,6 +167,8 @@ signal will be rolled back anyway.
 For signals taken in non-TM or suspended mode, we use the
 normal/non-checkpointed stack pointer.
 
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
 
 Failure cause codes used by kernel
 ==================================

Documentation/rapidio/mport_cdev.txt

@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
 
 III. Module parameters
 
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+        This parameter set a maximum completion wait time for SYNC mode DMA
+        transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
 - 'dbg_level' - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.

MAINTAINERS

@@ -798,6 +798,7 @@ M:	Laura Abbott <labbott@redhat.com>
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 L:	devel@driverdev.osuosl.org
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -1643,7 +1644,6 @@ F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
-F:	drivers/spi/spi-s3c*
 F:	Documentation/arm/Samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/sram/samsung-sram.txt
@@ -3247,7 +3247,7 @@ F:	kernel/cpuset.c
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
 M:	Michal Hocko <mhocko@kernel.org>
-M:	Vladimir Davydov <vdavydov@virtuozzo.com>
+M:	Vladimir Davydov <vdavydov.dev@gmail.com>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -10253,6 +10253,17 @@ S:	Supported
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 F:	drivers/clk/samsung/
 
+SAMSUNG SPI DRIVERS
+M:	Kukjin Kim <kgene@kernel.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
+M:	Andi Shyti <andi.shyti@samsung.com>
+L:	linux-spi@vger.kernel.org
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/spi/spi-samsung.txt
+F:	drivers/spi/spi-s3c*
+F:	include/linux/platform_data/spi-s3c64xx.h
+
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
 M:	Girish K S <ks.giri@samsung.com>
@@ -11232,12 +11243,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <johnny.kim@atmel.com>
-M:	Austin Shin <austin.shin@atmel.com>
-M:	Chris Park <chris.park@atmel.com>
-M:	Tony Cho <tony.cho@atmel.com>
-M:	Glen Lee <glen.lee@atmel.com>
-M:	Leo Kim <leo.kim@atmel.com>
+M:	Aditya Shankar <aditya.shankar@microchip.com>
+M:	Ganesh Krishna <ganesh.krishna@microchip.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/staging/wilc1000/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -336,17 +336,6 @@ config HAVE_ARCH_SECCOMP_FILTER
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
 
-	  For best performance, an arch should use seccomp_phase1 and
-	  seccomp_phase2 directly.  It should call seccomp_phase1 for all
-	  syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
-	  need to be called from a ptrace-safe context.  It must then
-	  call seccomp_phase2 if seccomp_phase1 returns anything other
-	  than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
-
-	  As an additional optimization, an arch may provide seccomp_data
-	  directly to seccomp_phase1; this avoids multiple calls
-	  to the syscall_xyz helpers for every syscall.
-
 config SECCOMP_FILTER
 	def_bool y
 	depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET

arch/arm/boot/dts/rk3066a.dtsi

@@ -197,6 +197,8 @@
 		clock-names = "saradc", "apb_pclk";
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3288.dtsi

@@ -279,6 +279,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/boot/dts/rk3xxx.dtsi

@@ -399,6 +399,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};
 

arch/arm/mach-pxa/idp.c

@@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_USE_DMA | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-pxa/xcep.c

@@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
 };
 
 static struct platform_device smc91x_device = {

arch/arm/mach-realview/core.c

@@ -93,7 +93,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
 };
 
 static struct platform_device realview_eth_device = {

arch/arm/mach-sa1100/pleb.c

@@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = {
 };
 
 static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
 };
 
 static struct platform_device smc91x_device = {

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -270,6 +270,8 @@
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		status = "disabled";
 	};