Merge branch 'sh/stable-updates'

Documentation/filesystems/00-INDEX

@@ -16,6 +16,8 @@ befs.txt
 	- information about the BeOS filesystem for Linux.
 bfs.txt
 	- info for the SCO UnixWare Boot Filesystem (BFS).
+ceph.txt
+	- info for the Ceph Distributed File System
 cifs.txt
 	- description of the CIFS filesystem.
 coda.txt

Documentation/filesystems/ceph.txt

@@ -8,7 +8,7 @@ Basic features include:
 
  * POSIX semantics
  * Seamless scaling from 1 to many thousands of nodes
- * High availability and reliability.  No single points of failure.
+ * High availability and reliability.  No single point of failure.
  * N-way replication of data across storage nodes
  * Fast recovery from node failures
  * Automatic rebalancing of data on node addition/removal
@@ -94,7 +94,7 @@ Mount Options
 
   wsize=X
 	Specify the maximum write size in bytes.  By default there is no
-	maximu.  Ceph will normally size writes based on the file stripe
+	maximum.  Ceph will normally size writes based on the file stripe
 	size.
 
   rsize=X
@@ -115,7 +115,7 @@ Mount Options
 	number of entries in that directory.
 
   nocrc
-	Disable CRC32C calculation for data writes.  If set, the OSD
+	Disable CRC32C calculation for data writes.  If set, the storage node
 	must rely on TCP's error correction to detect data corruption
 	in the data payload.
 
@@ -133,7 +133,8 @@ For more information on Ceph, see the home page at
 	http://ceph.newdream.net/
 
 The Linux kernel client source tree is available at
-	git://ceph.newdream.net/linux-ceph-client.git
+	git://ceph.newdream.net/git/ceph-client.git
+	git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 
 and the source for the full system is at
-	git://ceph.newdream.net/ceph.git
+	git://ceph.newdream.net/git/ceph.git

Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt

@@ -21,6 +21,15 @@ Required properties:
 - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
   threads.
 
+Optional properties:
+- fsl,firmware-phandle:
+    Usage: required only if there is no fsl,qe-firmware child node
+    Value type: <phandle>
+    Definition: Points to a firmware node (see "QE Firmware Node" below)
+        that contains the firmware that should be uploaded for this QE.
+        The compatible property for the firmware node should say,
+        "fsl,qe-firmware".
+
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
   generators in Hz.
@@ -59,3 +68,48 @@ Example:
 		reg = <0 c000>;
 	};
      };
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties.  The node should be placed
+inside a QE node that needs it.  Doing so eliminates the need for a
+fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: A standard property.  Specify a string that indicates what
+          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
+
+   - fsl,firmware
+      Usage: required
+      Value type: <prop-encoded-array>, encoded as an array of bytes
+      Definition: A standard property.  This property contains the firmware
+          binary "blob".
+
+Example:
+	qe1@e0080000 {
+		compatible = "fsl,qe";
+		qe_firmware:qe-firmware {
+			compatible = "fsl,qe-firmware";
+			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+		};
+		...
+	};
+
+	qe2@e0090000 {
+		compatible = "fsl,qe";
+		fsl,firmware-phandle = <&qe_firmware>;
+		...
+	};

MAINTAINERS

@@ -1443,7 +1443,7 @@ F:	arch/powerpc/platforms/cell/
 
 CEPH DISTRIBUTED FILE SYSTEM CLIENT
 M:	Sage Weil <sage@newdream.net>
-L:	ceph-devel@lists.sourceforge.net
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.newdream.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 S:	Supported
@@ -3083,6 +3083,7 @@ F:	include/scsi/*iscsi*
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://www.isdn4linux.de
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
 S:	Maintained
@@ -3269,6 +3270,16 @@ S:	Maintained
 F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
+KEYS/KEYRINGS:
+M:	David Howells <dhowells@redhat.com>
+L:	keyrings@linux-nfs.org
+S:	Maintained
+F:	Documentation/keys.txt
+F:	include/linux/key.h
+F:	include/linux/key-type.h
+F:	include/keys/
+F:	security/keys/
+
 KGDB
 M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net
@@ -5423,7 +5434,6 @@ S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TIPC NETWORK LAYER
-M:	Per Liden <per.liden@ericsson.com>
 M:	Jon Maloy <jon.maloy@ericsson.com>
 M:	Allan Stephens <allan.stephens@windriver.com>
 L:	tipc-discussion@lists.sourceforge.net

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/arm/include/asm/cacheflush.h

@@ -15,6 +15,7 @@
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
+#include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -219,12 +220,6 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(const void *, const void *);
 };
 
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
 /*
  * Select the calling method
  */
@@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user

arch/arm/include/asm/clkdev.h

@@ -13,6 +13,7 @@
 #define __ASM_CLKDEV_H
 
 struct clk;
+struct device;
 
 struct clk_lookup {
 	struct list_head	node;

arch/arm/include/asm/irq.h

@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 struct irqaction;
+struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);

arch/arm/include/asm/outercache.h

@@ -0,0 +1,75 @@
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+	if (outer_cache.sync)
+		outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif	/* __ASM_OUTERCACHE_H */

arch/arm/include/asm/system.h

@@ -60,6 +60,8 @@
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 
+#include <asm/outercache.h>
+
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -137,10 +139,12 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb()		dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
-#define wmb()		dmb()
+#define wmb()		mb()
 #else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@@ -152,9 +156,9 @@ extern unsigned int user_debug;
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
 #endif
 
 #define read_barrier_depends()		do { } while(0)

arch/arm/kernel/kprobes.c

@@ -393,6 +393,14 @@ void __kprobes jprobe_return(void)
 		/*
 		 * Setup an empty pt_regs. Fill SP and PC fields as
 		 * they're needed by longjmp_break_handler.
+		 *
+		 * We allocate some slack between the original SP and start of
+		 * our fabricated regs. To be precise we want to have worst case
+		 * covered which is STMFD with all 16 regs so we allocate 2 *
+		 * sizeof(struct_pt_regs)).
+		 *
+		 * This is to prevent any simulated instruction from writing
+		 * over the regs when they are accessing the stack.
 		 */
 		"sub    sp, %0, %1		\n\t"
 		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@@ -410,7 +418,7 @@ void __kprobes jprobe_return(void)
 		"ldmia	sp, {r0 - pc}		\n\t"
 		:
 		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs)),
+		  "I" (sizeof(struct pt_regs) * 2),
 		  "J" (offsetof(struct pt_regs, ARM_sp)),
 		  "J" (offsetof(struct pt_regs, ARM_pc)),
 		  "J" (offsetof(struct pt_regs, ARM_cpsr))

arch/arm/lib/memmove.S

@@ -74,7 +74,7 @@ ENTRY(memmove)
 		rsb	ip, ip, #32
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:		W(nop)
 		W(ldr)	r3, [r1, #-4]!
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
@@ -85,7 +85,7 @@ ENTRY(memmove)
 
 		add	pc, pc, ip
 		nop
-		nop
+		W(nop)
 		W(str)	r3, [r0, #-4]!
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!

arch/arm/mm/Kconfig

@@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 config OUTER_CACHE
 	bool
 
+config OUTER_CACHE_SYNC
+	bool
+	help
+	  The outer cache has a outer_cache_fns.sync function pointer
+	  that can be used to drain the write buffer of the outer cache.
+
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
 	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
@@ -757,6 +763,7 @@ config CACHE_L2X0
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
 	default y
 	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
 	help
 	  This option enables the L2x0 PrimeCell.
 
@@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT
 	int
 	default 6 if ARM_L1_CACHE_SHIFT_6
 	default 5
+
+config ARCH_HAS_BARRIERS
+	bool
+	help
+	  This option allows the use of custom mandatory barriers
+	  included via the mach/barriers.h file.

arch/arm/mm/cache-l2x0.c

@@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr)
 }
 #endif
 
+static void l2x0_cache_sync(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l2x0_lock, flags);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
 static inline void l2x0_inv_all(void)
 {
 	unsigned long flags;
@@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
+	outer_cache.sync = l2x0_cache_sync;
 
 	printk(KERN_INFO "L2X0 cache controller enabled\n");
 }

arch/arm/vfp/vfpmodule.c

@@ -545,7 +545,7 @@ static int __init vfp_init(void)
 		 */
 		elf_hwcap |= HWCAP_VFP;
 #ifdef CONFIG_VFPv3
-		if (VFP_arch >= 3) {
+		if (VFP_arch >= 2) {
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*

arch/cris/arch-v32/drivers/pci/bios.c

@@ -50,7 +50,7 @@ pcibios_align_resource(void *data, const struct resource *res,
 	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
 		start = (start + 0x3ff) & ~0x3ff;
 
-	return start
+	return start;
 }
 
 int pcibios_enable_resources(struct pci_dev *dev, int mask)

arch/frv/mb93090-mb00/pci-frv.c

@@ -41,7 +41,7 @@ pcibios_align_resource(void *data, const struct resource *res,
 	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
 		start = (start + 0x3ff) & ~0x3ff;
 
-	return start
+	return start;
 }
 
 
@@ -94,8 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->start)
 					continue;
-				if (pci_claim_resource(dev, idx) < 0)
-					printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
+				pci_claim_resource(dev, idx);
 			}
 		}
 		pcibios_allocate_bus_resources(&bus->children);
@@ -125,7 +124,6 @@ static void __init pcibios_allocate_resources(int pass)
 				DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
 				    r->start, r->end, r->flags, disabled, pass);
 				if (pci_claim_resource(dev, idx) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;

arch/microblaze/Kconfig

@@ -75,9 +75,6 @@ config LOCKDEP_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config PCI
-	def_bool n
-
 config DTC
 	def_bool y
 

arch/microblaze/Makefile

@@ -84,7 +84,7 @@ define archhelp
   echo '* linux.bin    - Create raw binary'
   echo '  linux.bin.gz - Create compressed raw binary'
   echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
-  echo '                   - stripped elf with fdt blob
+  echo '                   - stripped elf with fdt blob'
   echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
   echo '  *_defconfig      - Select default config from arch/microblaze/configs'
   echo ''
@@ -94,3 +94,5 @@ define archhelp
   echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
   echo '  (minus the .dts extension).'
 endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*

arch/microblaze/boot/Makefile

@@ -23,8 +23,6 @@ $(obj)/system.dtb: $(obj)/$(DTB).dtb
 endif
 
 $(obj)/linux.bin: vmlinux FORCE
-	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
-	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
 	$(call if_changed,objcopy)
 	$(call if_changed,uimage)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
@@ -62,6 +60,4 @@ quiet_cmd_dtc = DTC     $@
 $(obj)/%.dtb: $(dtstree)/%.dts FORCE
 	$(call if_changed,dtc)
 
-clean-kernel += linux.bin linux.bin.gz simpleImage.*
-
-clean-files += *.dtb simpleImage.*.unstrip
+clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub