Merge tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai: "There've been many updates in ASoC side at this time, especially the framework enhancement for multiple CODECs on a single DAI and more componentization works. The only major change in ALSA core is the addition of timestamp type in sw_params field. This should behave in backward compatible way. Other than that, there are lots of small changes and new drivers in wide range, including a large code cut in HD-audio driver for deprecated static quirks. Some highlights are below: ALSA Core: - Add the new timestamp type field to sw_params to choose MONOTONIC_RAW type HD-audio: - Continued conversion to standard printk macros, generic code cleanups - Removal of obsoleted static quirk codes for Conexant and C-Media codecs - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED, Gigabyte BXBT-2807 mobo - Intel Braswell support ASoC: - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah - More componentisation work from Lars-Peter Clausen - The remainder of the conversions of CODEC drivers to params_width() by Mark Brown - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552 - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers" * tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits) ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.* ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata sound/oss/opl3: Remove typedef opl_devinfo ALSA: fireworks: fix specifiers in format strings for propper output ASoC: imx-audmux: Use uintptr_t for port numbers ASoC: davinci: Enable menuconfig entry for McASP ASoC: fsl_asrc: Don't access members of config before checking it ASoC: fsl_sarc_dma: Check pair before using it ASoC: adau1977: Fix truncation warning on 64 bit architectures ALSA: virtuoso: add Xonar Essence STX II support ALSA: riptide: fix %d confusingly prefixed with 0x in format strings ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings ALSA: hda - add codec ID for Braswell display audio codec ALSA: hda - add PCI IDs for Intel Braswell ALSA: usb-audio: Adjust Gamecom 780 volume level ALSA: usb-audio: improve dmesg source grepability ASoC: rt5670: Fix duplicate const warnings ASoC: rt5670: Staticise non-exported symbols ASoC: Intel: update stream only on stream IPC msgs ...
2026-05-01 15:00:59 -07:00 · 2014-08-06 20:07:24 -07:00
parent ec6c0a7778 a509574e5e
commit 930e0312bc
294 changed files with 17276 additions and 7474 deletions
@@ -10,10 +10,14 @@ Optional properties:

  - reset-gpio : a GPIO spec for the reset/power down pin.
 		 If specified, it will be deasserted at probe time.
+  - va-supply : a regulator spec, providing 5.0V
+  - vd-supply : a regulator spec, providing 3.3V

 Example:

 spdif: ak5386@0 {
 	compatible = "asahi-kasei,ak5386";
 	reset-gpio = <&gpio0 23>;
+	va-supply = <&vdd_5v0_reg>;
+	vd-supply = <&vdd_3v3_reg>;
 };
@@ -0,0 +1,29 @@
+CS4265 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "cirrus,cs4265"
+
+  - reg : the I2C address of the device for I2C. The I2C address depends on
+          the state of the AD0 pin.  If AD0 is high, the i2c address is 0x4f.
+          If it is low, the i2c address is 0x4e.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+Examples:
+
+codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
+	compatible = "cirrus,cs4265";
+	reg = <0x4f>;
+};
+
+
+codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
+	compatible = "cirrus,cs4265";
+	reg = <0x4e>;
+};
@@ -0,0 +1,60 @@
+Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
+signal associated with an input clock into a signal associated with a different
+output clock. The driver currently works as a Front End of DPCM with other Back
+Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
+three substreams within totally 10 channels.
+
+Required properties:
+
+  - compatible		: Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Contains the following entries
+	"mem"		  Peripheral access clock to access registers.
+	"ipg"		  Peripheral clock to driver module.
+	"asrck_<0-f>"	  Clock sources for input and output clock.
+
+   - big-endian		: If this property is absent, the little endian mode
+			  will be in use as default. Otherwise, the big endian
+			  mode will be in use for all the device registers.
+
+   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
+
+   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
+
+Example:
+
+asrc: asrc@02034000 {
+	compatible = "fsl,imx53-asrc";
+	reg = <0x02034000 0x4000>;
+	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 107>, <&clks 0>, <&clks 0>;
+	clock-names = "mem", "ipg", "asrck0",
+		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+		"asrck_d", "asrck_e", "asrck_f";
+	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+	dma-names = "rxa", "rxb", "rxc",
+		"txa", "txb", "txc";
+	fsl,asrc-rate  = <48000>;
+	fsl,asrc-width = <16>;
+	status = "okay";
+};
@@ -4,7 +4,7 @@ This device supports I2C only.

 Required properties:

- compatible : "maxim,max98090".
+- compatible : "maxim,max98090" or "maxim,max98091".

 - reg : The I2C address of the device.

@@ -13,6 +13,9 @@ Required properties:
 - rcar_sound,src		: Should contain SRC feature.
 				  The number of SRC subnode should be same as HW.
 				  see below for detail.
+- rcar_sound,dvc		: Should contain DVC feature.
+				  The number of DVC subnode should be same as HW.
+				  see below for detail.
 - rcar_sound,dai		: DAI contents.
 				  The number of DAI subnode should be same as HW.
 				  see below for detail.
@@ -21,6 +24,7 @@ SSI subnode properties:
 - interrupts			: Should contain SSI interrupt for PIO transfer
 - shared-pin			: if shared clock pin
 - pio-transfer			: use PIO transfer mode
+- no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case

 SRC subnode properties:
 no properties at this point
@@ -39,6 +43,11 @@ rcar_sound: rcar_sound@0xffd90000 {
 		<0 0xec540000 0 0x1000>, /* SSIU */
 		<0 0xec541000 0 0x1280>; /* SSI */

+	rcar_sound,dvc {
+		dvc0: dvc@0 { };
+		dvc1: dvc@1 { };
+	};
+
 	rcar_sound,src {
 		src0: src@0 { };
 		src1: src@1 { };
@@ -0,0 +1,37 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+   - "rockchip,rk3066-i2s": for rk3066
+   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
+   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: should contain the I2S interrupt.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+   - "i2s_hclk": clock for I2S BUS
+   - "i2s_clk" : clock for I2S controller
+
+Example for rk3288 I2S controller:
+
+i2s@ff890000 {
+	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+	reg = <0xff890000 0x10000>;
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dmas = <&pdma1 0>, <&pdma1 1>;
+	dma-names = "rx", "tx";
+	clock-names = "i2s_hclk", "i2s_clk";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
@@ -0,0 +1,35 @@
+Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
+
+Required properties:
+ - compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
+		"samsung,odroidu3-audio" - for Odroid U3 board
+ - samsung,model : the user-visible name of this sound complex
+ - samsung,i2s-controller : the phandle of the I2S controller
+ - samsung,audio-codec : the phandle of the MAX98090 audio codec
+ - samsung,audio-routing : a list of the connections between audio
+   components;  each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source;
+   valid names for sources and sinks are the MAX98090's pins (as
+   documented in its binding), and the jacks on the board
+   For Odroid X2:
+     * Headphone Jack
+     * Mic Jack
+     * DMIC
+
+   For Odroid U3:
+     * Headphone Jack
+     * Speakers
+
+Example:
+
+sound {
+	compatible = "samsung,odroidu3-audio";
+	samsung,i2s-controller = <&i2s0>;
+	samsung,audio-codec = <&max98090>;
+	samsung,model = "Odroid-X2";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
@@ -0,0 +1,27 @@
+* SiRF SoC USP module
+
+Required properties:
+- compatible: "sirf,prima2-usp-pcm"
+- reg: Base address and size entries:
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+- clocks: USP controller clock source
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+
+Example:
+usp0: usp@b0080000 {
+	compatible = "sirf,prima2-usp-pcm";
+	reg = <0xb0080000 0x10000>;
+	clocks = <&clks 28>;
+	dmas = <&dmac1 1>, <&dmac1 2>;
+	dma-names = "rx", "tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usp0_only_utfs_pins_a>;
+};
+
@@ -3,15 +3,20 @@ Audio Binding for Snow boards
 Required properties:
 - compatible : Can be one of the following,
 			"google,snow-audio-max98090" or
+			"google,snow-audio-max98091" or
 			"google,snow-audio-max98095"
 - samsung,i2s-controller: The phandle of the Samsung I2S controller
 - samsung,audio-codec: The phandle of the audio codec

+Optional:
+- samsung,model: The name of the sound-card
+
 Example:

 sound {
 		compatible = "google,snow-audio-max98095";

+		samsung,model = "Snow-I2S-MAX98095";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 };
@@ -0,0 +1,26 @@
+Texas Instruments - tas2552 Codec module
+
+The tas2552 serial control bus communicates through I2C protocols
+
+Required properties:
+	- compatible - One of:
+		"ti,tas2552" - TAS2552
+	- reg -  I2C slave address
+	- supply-*: Required supply regulators are:
+		"vbat"		battery voltage
+		"iovdd"		I/O Voltage
+		"avdd"		Analog DAC Voltage
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device
+
+Example:
+
+tas2552: tas2552@41 {
+	compatible = "ti,tas2552";
+	reg = <0x41>;
+	enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/TAS2552
@@ -31,6 +31,9 @@ Optional properties:

 			Most systems should not set any of these properties.

+ - avdd-supply:         Power supply for AVDD, providing 3.3V
+ - dvdd-supply:         Power supply for DVDD, providing 3.3V
+
 Examples:

 	i2c_bus {
@@ -39,5 +42,7 @@ Examples:
 			reg = <0x1b>;
 			reset-gpio = <&gpio 23 0>;
 			ti,charge-period = <156000>;
+			avdd-supply = <&vdd_3v3_reg>;
+			dvdd-supply = <&vdd_3v3_reg>;
 		};
 	};
@@ -0,0 +1,33 @@
+WM8904 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+  - compatible: "wlf,wm8904"
+  - reg: the I2C address of the device.
+  - clock-names: "mclk"
+  - clocks: reference to
+    <Documentation/devicetree/bindings/clock/clock-bindings.txt>
+
+Pins on the device (for linking into audio routes):
+
+  * IN1L
+  * IN1R
+  * IN2L
+  * IN2R
+  * IN3L
+  * IN3R
+  * HPOUTL
+  * HPOUTR
+  * LINEOUTL
+  * LINEOUTR
+  * MICBIAS
+
+Examples:
+
+codec: wm8904@1a {
+	compatible = "wlf,wm8904";
+	reg = <0x1a>;
+	clocks = <&pck0>;
+	clock-names = "mclk";
+};
@@ -2026,8 +2026,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
  -------------------

    Module for sound cards based on the Asus AV66/AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, DS, Essence ST (Deluxe), Essence STX,
-    HDAV1.3 (Deluxe), and HDAV1.3 Slim.
+    i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe),
+    Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim.

    This module supports autoprobe and multiple cards.

@@ -284,6 +284,11 @@ STAC92HD83*
  hp-zephyr	HP Zephyr
  hp-led	HP with broken BIOS for mute LED
  hp-inv-led	HP with broken BIOS for inverted mute LED
+  hp-mic-led	HP with mic-mute LED
+  headset-jack	Dell Latitude with a 4-pin headset jack
+  hp-envy-bass	Pin fixup for HP Envy bass speaker (NID 0x0f)
+  hp-envy-ts-bass Pin fixup for HP Envy TS bass speaker (NID 0x10)
+  hp-bnb13-eq	Hardware equalizer setup for HP laptops
  auto		BIOS setup (default)

 STAC92HD95
@@ -7526,6 +7526,13 @@ F:	drivers/rtc/
 F:	include/linux/rtc.h
 F:	include/uapi/linux/rtc.h

+REALTEK AUDIO CODECS
+M:	Bard Liao <bardliao@realtek.com>
+M:	Oder Chiou <oder_chiou@realtek.com>
+S:	Maintained
+F:	sound/soc/codecs/rt*
+F:	include/sound/rt*.h
+
 REISERFS FILE SYSTEM
 L:	reiserfs-devel@vger.kernel.org
 S:	Supported
@@ -998,6 +998,8 @@ static struct platform_device fsi_wm8978_device = {
 	.id	= 0,
 	.dev	= {
 		.platform_data	= &fsi_wm8978_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
 	},
 };

@@ -1021,6 +1023,8 @@ static struct platform_device fsi_hdmi_device = {
 	.id	= 1,
 	.dev	= {
 		.platform_data	= &fsi2_hdmi_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
 	},
 };

@@ -603,6 +603,8 @@ static struct platform_device fsi_ak4648_device = {
 	.name	= "asoc-simple-card",
 	.dev	= {
 		.platform_data	= &fsi2_ak4648_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_ak4648_device.dev.coherent_dma_mask,
 	},
 };

@@ -523,6 +523,8 @@ static struct platform_device fsi_hdmi_device = {
 	.id	= 1,
 	.dev	= {
 		.platform_data	= &fsi2_hdmi_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
 	},
 };

@@ -919,6 +921,8 @@ static struct platform_device fsi_ak4643_device = {
 	.name	= "asoc-simple-card",
 	.dev	= {
 		.platform_data	= &fsi2_ak4643_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask,
 	},
 };

@@ -874,6 +874,8 @@ static struct platform_device fsi_da7210_device = {
 	.name	= "asoc-simple-card",
 	.dev	= {
 		.platform_data	= &fsi_da7210_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
 	},
 };

@@ -0,0 +1,78 @@
+/*
+ * platform_sst_audio.h:  sst audio platform data header file
+ *
+ * Copyright (C) 2012-14 Intel Corporation
+ * Author: Jeeja KP <jeeja.kp@intel.com>
+ * 	Omair Mohammed Abdullah <omair.m.abdullah@intel.com>
+ *	Vinod Koul ,vinod.koul@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#ifndef _PLATFORM_SST_AUDIO_H_
+#define _PLATFORM_SST_AUDIO_H_
+
+#include <linux/sfi.h>
+
+enum sst_audio_task_id_mrfld {
+	SST_TASK_ID_NONE = 0,
+	SST_TASK_ID_SBA = 1,
+	SST_TASK_ID_MEDIA = 3,
+	SST_TASK_ID_MAX = SST_TASK_ID_MEDIA,
+};
+
+/* Device IDs for Merrifield are Pipe IDs,
+ * ref: DSP spec v0.75 */
+enum sst_audio_device_id_mrfld {
+	/* Output pipeline IDs */
+	PIPE_ID_OUT_START = 0x0,
+	PIPE_CODEC_OUT0 = 0x2,
+	PIPE_CODEC_OUT1 = 0x3,
+	PIPE_SPROT_LOOP_OUT = 0x4,
+	PIPE_MEDIA_LOOP1_OUT = 0x5,
+	PIPE_MEDIA_LOOP2_OUT = 0x6,
+	PIPE_VOIP_OUT = 0xC,
+	PIPE_PCM0_OUT = 0xD,
+	PIPE_PCM1_OUT = 0xE,
+	PIPE_PCM2_OUT = 0xF,
+	PIPE_MEDIA0_OUT = 0x12,
+	PIPE_MEDIA1_OUT = 0x13,
+/* Input Pipeline IDs */
+	PIPE_ID_IN_START = 0x80,
+	PIPE_CODEC_IN0 = 0x82,
+	PIPE_CODEC_IN1 = 0x83,
+	PIPE_SPROT_LOOP_IN = 0x84,
+	PIPE_MEDIA_LOOP1_IN = 0x85,
+	PIPE_MEDIA_LOOP2_IN = 0x86,
+	PIPE_VOIP_IN = 0x8C,
+	PIPE_PCM0_IN = 0x8D,
+	PIPE_PCM1_IN = 0x8E,
+	PIPE_MEDIA0_IN = 0x8F,
+	PIPE_MEDIA1_IN = 0x90,
+	PIPE_MEDIA2_IN = 0x91,
+	PIPE_RSVD = 0xFF,
+};
+
+/* The stream map for each platform consists of an array of the below
+ * stream map structure.
+ */
+struct sst_dev_stream_map {
+	u8 dev_num;		/* device id */
+	u8 subdev_num;		/* substream */
+	u8 direction;
+	u8 device_id;		/* fw id */
+	u8 task_id;		/* fw task */
+	u8 status;
+};
+
+struct sst_platform_data {
+	/* Intel software platform id*/
+	struct sst_dev_stream_map *pdev_strm_map;
+	unsigned int strm_map_size;
+};
+
+int add_sst_platform_device(void);
+#endif
+
--- a/Show More
+++ b/Show More