Merge branch 'next' into for-linus

Prepare second round of input updates for 3.17.

drivers/input/input-mt.c

@@ -236,6 +236,31 @@ void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
 }
 EXPORT_SYMBOL(input_mt_report_pointer_emulation);
 
+/**
+ * input_mt_drop_unused() - Inactivate slots not seen in this frame
+ * @dev: input device with allocated MT slots
+ *
+ * Lift all slots not seen since the last call to this function.
+ */
+void input_mt_drop_unused(struct input_dev *dev)
+{
+	struct input_mt *mt = dev->mt;
+	int i;
+
+	if (!mt)
+		return;
+
+	for (i = 0; i < mt->num_slots; i++) {
+		if (!input_mt_is_used(mt, &mt->slots[i])) {
+			input_mt_slot(dev, i);
+			input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
+		}
+	}
+
+	mt->frame++;
+}
+EXPORT_SYMBOL(input_mt_drop_unused);
+
 /**
  * input_mt_sync_frame() - synchronize mt frame
  * @dev: input device with allocated MT slots
@@ -247,27 +272,18 @@ EXPORT_SYMBOL(input_mt_report_pointer_emulation);
 void input_mt_sync_frame(struct input_dev *dev)
 {
 	struct input_mt *mt = dev->mt;
-	struct input_mt_slot *s;
 	bool use_count = false;
 
 	if (!mt)
 		return;
 
-	if (mt->flags & INPUT_MT_DROP_UNUSED) {
-		for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
-			if (input_mt_is_used(mt, s))
-				continue;
-			input_mt_slot(dev, s - mt->slots);
-			input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
-		}
-	}
+	if (mt->flags & INPUT_MT_DROP_UNUSED)
+		input_mt_drop_unused(dev);
 
 	if ((mt->flags & INPUT_MT_POINTER) && !(mt->flags & INPUT_MT_SEMI_MT))
 		use_count = true;
 
 	input_mt_report_pointer_emulation(dev, use_count);
-
-	mt->frame++;
 }
 EXPORT_SYMBOL(input_mt_sync_frame);
 

drivers/input/joystick/xpad.c

@@ -95,7 +95,8 @@
 #define XTYPE_XBOX        0
 #define XTYPE_XBOX360     1
 #define XTYPE_XBOX360W    2
-#define XTYPE_UNKNOWN     3
+#define XTYPE_XBOXONE     3
+#define XTYPE_UNKNOWN     4
 
 static bool dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);
@@ -121,6 +122,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
 	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -231,10 +233,12 @@ static const signed short xpad_abs_triggers[] = {
 	-1
 };
 
-/* Xbox 360 has a vendor-specific class, so we cannot match it with only
+/*
+ * Xbox 360 has a vendor-specific class, so we cannot match it with only
  * USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
  * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
- * wireless controllers have protocol 129. */
+ * wireless controllers have protocol 129.
+ */
 #define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
 	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
 	.idVendor = (vend), \
@@ -245,9 +249,20 @@ static const signed short xpad_abs_triggers[] = {
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
 	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
 
+/* The Xbox One controller uses subclass 71 and protocol 208. */
+#define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
+	.idVendor = (vend), \
+	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
+	.bInterfaceSubClass = 71, \
+	.bInterfaceProtocol = (pr)
+#define XPAD_XBOXONE_VENDOR(vend) \
+	{ XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+
 static struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
+	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x046d),		/* Logitech X-Box 360 style controllers */
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
@@ -278,12 +293,10 @@ struct usb_xpad {
 	struct urb *bulk_out;
 	unsigned char *bdata;
 
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct urb *irq_out;		/* urb for interrupt out report */
 	unsigned char *odata;		/* output data */
 	dma_addr_t odata_dma;
 	struct mutex odata_mutex;
-#endif
 
 #if defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct xpad_led *led;
@@ -470,6 +483,105 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
 	xpad360_process_packet(xpad, cmd, &data[4]);
 }
 
+/*
+ *	xpadone_process_buttons
+ *
+ *	Process a button update packet from an Xbox one controller.
+ */
+static void xpadone_process_buttons(struct usb_xpad *xpad,
+				struct input_dev *dev,
+				unsigned char *data)
+{
+	/* menu/view buttons */
+	input_report_key(dev, BTN_START,  data[4] & 0x04);
+	input_report_key(dev, BTN_SELECT, data[4] & 0x08);
+
+	/* buttons A,B,X,Y */
+	input_report_key(dev, BTN_A,	data[4] & 0x10);
+	input_report_key(dev, BTN_B,	data[4] & 0x20);
+	input_report_key(dev, BTN_X,	data[4] & 0x40);
+	input_report_key(dev, BTN_Y,	data[4] & 0x80);
+
+	/* digital pad */
+	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+		/* dpad as buttons (left, right, up, down) */
+		input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & 0x04);
+		input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & 0x08);
+		input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & 0x01);
+		input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & 0x02);
+	} else {
+		input_report_abs(dev, ABS_HAT0X,
+				 !!(data[5] & 0x08) - !!(data[5] & 0x04));
+		input_report_abs(dev, ABS_HAT0Y,
+				 !!(data[5] & 0x02) - !!(data[5] & 0x01));
+	}
+
+	/* TL/TR */
+	input_report_key(dev, BTN_TL,	data[5] & 0x10);
+	input_report_key(dev, BTN_TR,	data[5] & 0x20);
+
+	/* stick press left/right */
+	input_report_key(dev, BTN_THUMBL, data[5] & 0x40);
+	input_report_key(dev, BTN_THUMBR, data[5] & 0x80);
+
+	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+		/* left stick */
+		input_report_abs(dev, ABS_X,
+				 (__s16) le16_to_cpup((__le16 *)(data + 10)));
+		input_report_abs(dev, ABS_Y,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+
+		/* right stick */
+		input_report_abs(dev, ABS_RX,
+				 (__s16) le16_to_cpup((__le16 *)(data + 14)));
+		input_report_abs(dev, ABS_RY,
+				 ~(__s16) le16_to_cpup((__le16 *)(data + 16)));
+	}
+
+	/* triggers left/right */
+	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+		input_report_key(dev, BTN_TL2,
+				 (__u16) le16_to_cpup((__le16 *)(data + 6)));
+		input_report_key(dev, BTN_TR2,
+				 (__u16) le16_to_cpup((__le16 *)(data + 8)));
+	} else {
+		input_report_abs(dev, ABS_Z,
+				 (__u16) le16_to_cpup((__le16 *)(data + 6)));
+		input_report_abs(dev, ABS_RZ,
+				 (__u16) le16_to_cpup((__le16 *)(data + 8)));
+	}
+
+	input_sync(dev);
+}
+
+/*
+ *	xpadone_process_packet
+ *
+ *	Completes a request by converting the data into events for the
+ *	input subsystem. This version is for the Xbox One controller.
+ *
+ *	The report format was gleaned from
+ *	https://github.com/kylelemons/xbox/blob/master/xbox.go
+ */
+
+static void xpadone_process_packet(struct usb_xpad *xpad,
+				u16 cmd, unsigned char *data)
+{
+	struct input_dev *dev = xpad->dev;
+
+	switch (data[0]) {
+	case 0x20:
+		xpadone_process_buttons(xpad, dev, data);
+		break;
+
+	case 0x07:
+		/* the xbox button has its own special report */
+		input_report_key(dev, BTN_MODE, data[4] & 0x01);
+		input_sync(dev);
+		break;
+	}
+}
+
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -502,6 +614,9 @@ static void xpad_irq_in(struct urb *urb)
 	case XTYPE_XBOX360W:
 		xpad360w_process_packet(xpad, 0, xpad->idata);
 		break;
+	case XTYPE_XBOXONE:
+		xpadone_process_packet(xpad, 0, xpad->idata);
+		break;
 	default:
 		xpad_process_packet(xpad, 0, xpad->idata);
 	}
@@ -535,7 +650,6 @@ static void xpad_bulk_out(struct urb *urb)
 	}
 }
 
-#if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 static void xpad_irq_out(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -573,6 +687,7 @@ exit:
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
+	int ep_irq_out_idx;
 	int error;
 
 	if (xpad->xtype == XTYPE_UNKNOWN)
@@ -593,7 +708,10 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 		goto fail2;
 	}
 
-	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
+	/* Xbox One controller has in/out endpoints swapped. */
+	ep_irq_out_idx = xpad->xtype == XTYPE_XBOXONE ? 0 : 1;
+	ep_irq_out = &intf->cur_altsetting->endpoint[ep_irq_out_idx].desc;
+
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
 			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
 			 xpad->odata, XPAD_PKT_LEN,
@@ -621,11 +739,6 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
 				xpad->odata, xpad->odata_dma);
 	}
 }
-#else
-static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
-static void xpad_deinit_output(struct usb_xpad *xpad) {}
-static void xpad_stop_output(struct usb_xpad *xpad) {}
-#endif
 
 #ifdef CONFIG_JOYSTICK_XPAD_FF
 static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
@@ -692,7 +805,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_UNKNOWN)
+	if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
 		return 0;
 
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
@@ -801,6 +914,14 @@ static int xpad_open(struct input_dev *dev)
 	if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
 		return -EIO;
 
+	if (xpad->xtype == XTYPE_XBOXONE) {
+		/* Xbox one controller needs to be initialized. */
+		xpad->odata[0] = 0x05;
+		xpad->odata[1] = 0x20;
+		xpad->irq_out->transfer_buffer_length = 2;
+		return usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+	}
+
 	return 0;
 }
 
@@ -816,6 +937,7 @@ static void xpad_close(struct input_dev *dev)
 
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 {
+	struct usb_xpad *xpad = input_get_drvdata(input_dev);
 	set_bit(abs, input_dev->absbit);
 
 	switch (abs) {
@@ -827,7 +949,10 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 		break;
 	case ABS_Z:
 	case ABS_RZ:	/* the triggers (if mapped to axes) */
-		input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+		if (xpad->xtype == XTYPE_XBOXONE)
+			input_set_abs_params(input_dev, abs, 0, 1023, 0, 0);
+		else
+			input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
 		break;
 	case ABS_HAT0X:
 	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
@@ -842,6 +967,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_xpad *xpad;
 	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
+	int ep_irq_in_idx;
 	int i, error;
 
 	for (i = 0; xpad_device[i].idVendor; i++) {
@@ -850,6 +976,16 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 			break;
 	}
 
+	if (xpad_device[i].xtype == XTYPE_XBOXONE &&
+	    intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+		/*
+		 * The Xbox One controller lists three interfaces all with the
+		 * same interface class, subclass and protocol. Differentiate by
+		 * interface number.
+		 */
+		return -ENODEV;
+	}
+
 	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!xpad || !input_dev) {
@@ -920,7 +1056,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		__set_bit(xpad_common_btn[i], input_dev->keybit);
 
 	/* set up model-specific ones */
-	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W) {
+	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
+	    xpad->xtype == XTYPE_XBOXONE) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
 			__set_bit(xpad360_btn[i], input_dev->keybit);
 	} else {
@@ -933,7 +1070,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 			__set_bit(xpad_btn_pad[i], input_dev->keybit);
 	} else {
 		for (i = 0; xpad_abs_pad[i] >= 0; i++)
-		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
+			xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
 	}
 
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
@@ -956,7 +1093,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	if (error)
 		goto fail5;
 
-	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
+	/* Xbox One controller has in/out endpoints swapped. */
+	ep_irq_in_idx = xpad->xtype == XTYPE_XBOXONE ? 1 : 0;
+	ep_irq_in = &intf->cur_altsetting->endpoint[ep_irq_in_idx].desc;
+
 	usb_fill_int_urb(xpad->irq_in, udev,
 			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
 			 xpad->idata, XPAD_PKT_LEN, xpad_irq_in,

drivers/input/keyboard/cap1106.c

@@ -64,7 +64,7 @@ struct cap1106_priv {
 	struct input_dev *idev;
 
 	/* config */
-	unsigned int keycodes[CAP1106_NUM_CHN];
+	unsigned short keycodes[CAP1106_NUM_CHN];
 };
 
 static const struct reg_default cap1106_reg_defaults[] = {
@@ -272,6 +272,12 @@ static int cap1106_i2c_probe(struct i2c_client *i2c_client,
 	for (i = 0; i < CAP1106_NUM_CHN; i++)
 		__set_bit(priv->keycodes[i], priv->idev->keybit);
 
+	__clear_bit(KEY_RESERVED, priv->idev->keybit);
+
+	priv->idev->keycode = priv->keycodes;
+	priv->idev->keycodesize = sizeof(priv->keycodes[0]);
+	priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
+
 	priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
 	priv->idev->id.product = CAP1106_PRODUCT_ID;
 	priv->idev->id.version = rev;

drivers/input/mouse/synaptics.c

@@ -117,6 +117,9 @@ void synaptics_reset(struct psmouse *psmouse)
 }
 
 #ifdef CONFIG_MOUSE_PS2_SYNAPTICS
+
+static bool cr48_profile_sensor;
+
 struct min_max_quirk {
 	const char * const *pnp_ids;
 	int x_min, x_max, y_min, y_max;
@@ -1152,6 +1155,42 @@ static void synaptics_image_sensor_process(struct psmouse *psmouse,
 	priv->agm_pending = false;
 }
 
+static void synaptics_profile_sensor_process(struct psmouse *psmouse,
+					     struct synaptics_hw_state *sgm,
+					     int num_fingers)
+{
+	struct input_dev *dev = psmouse->dev;
+	struct synaptics_data *priv = psmouse->private;
+	struct synaptics_hw_state *hw[2] = { sgm, &priv->agm };
+	struct input_mt_pos pos[2];
+	int slot[2], nsemi, i;
+
+	nsemi = clamp_val(num_fingers, 0, 2);
+
+	for (i = 0; i < nsemi; i++) {
+		pos[i].x = hw[i]->x;
+		pos[i].y = synaptics_invert_y(hw[i]->y);
+	}
+
+	input_mt_assign_slots(dev, slot, pos, nsemi);
+
+	for (i = 0; i < nsemi; i++) {
+		input_mt_slot(dev, slot[i]);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+		input_report_abs(dev, ABS_MT_POSITION_X, pos[i].x);
+		input_report_abs(dev, ABS_MT_POSITION_Y, pos[i].y);
+		input_report_abs(dev, ABS_MT_PRESSURE, hw[i]->z);
+	}
+
+	input_mt_drop_unused(dev);
+	input_mt_report_pointer_emulation(dev, false);
+	input_mt_report_finger_count(dev, num_fingers);
+
+	synaptics_report_buttons(psmouse, sgm);
+
+	input_sync(dev);
+}
+
 /*
  *  called for each full received packet from the touchpad
  */
@@ -1215,6 +1254,11 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		finger_width = 0;
 	}
 
+	if (cr48_profile_sensor) {
+		synaptics_profile_sensor_process(psmouse, &hw, num_fingers);
+		return;
+	}
+
 	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
 		synaptics_report_semi_mt_data(dev, &hw, &priv->agm,
 					      num_fingers);
@@ -1360,6 +1404,9 @@ static void set_input_params(struct psmouse *psmouse,
 	set_abs_position_params(dev, priv, ABS_X, ABS_Y);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
+	if (cr48_profile_sensor)
+		input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
 	if (SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) {
 		set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
 					ABS_MT_POSITION_Y);
@@ -1371,11 +1418,16 @@ static void set_input_params(struct psmouse *psmouse,
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
 		__set_bit(BTN_TOOL_QUINTTAP, dev->keybit);
 	} else if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
-		/* Non-image sensors with AGM use semi-mt */
-		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
-		input_mt_init_slots(dev, 2, 0);
 		set_abs_position_params(dev, priv, ABS_MT_POSITION_X,
 					ABS_MT_POSITION_Y);
+		/*
+		 * Profile sensor in CR-48 tracks contacts reasonably well,
+		 * other non-image sensors with AGM use semi-mt.
+		 */
+		input_mt_init_slots(dev, 2,
+				    INPUT_MT_POINTER |
+				    (cr48_profile_sensor ?
+					INPUT_MT_TRACK : INPUT_MT_SEMI_MT));
 	}
 
 	if (SYN_CAP_PALMDETECT(priv->capabilities))
@@ -1577,10 +1629,24 @@ static const struct dmi_system_id olpc_dmi_table[] __initconst = {
 	{ }
 };
 
+static const struct dmi_system_id __initconst cr48_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Cr-48 Chromebook (Codename Mario) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IEC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Mario"),
+		},
+	},
+#endif
+	{ }
+};
+
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
 	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
+	cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
 }
 
 static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)

drivers/input/touchscreen/edt-ft5x06.c

@@ -262,7 +262,6 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
 	case M06:
 		wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
 		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
-		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
 		wrbuf[2] = value;
 		wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
 		return edt_ft5x06_ts_readwrite(tsdata->client, 4,

include/linux/input/mt.h

@@ -105,6 +105,7 @@ void input_mt_report_slot_state(struct input_dev *dev,
 
 void input_mt_report_finger_count(struct input_dev *dev, int count);
 void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
+void input_mt_drop_unused(struct input_dev *dev);
 
 void input_mt_sync_frame(struct input_dev *dev);