ahci-imx: Port to library-ised ahci_platform

This avoids the ugliness of creating a nested platform device from probe.

While moving it around anyways, move the mk6q phy init code from probe
to imx_sata_enable, as the phy needs to be re-initialized on resume too,
otherwise the drive won't be recognized after resume.

Tested on a wandboard i.mx6 quad.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -5,8 +5,9 @@ Each SATA controller should have its own node.
 
 Required properties:
 - compatible        : compatible list, one of "snps,spear-ahci",
-                      "snps,exynos5440-ahci", "ibm,476gtr-ahci", or
-                      "allwinner,sun4i-a10-ahci"
+                      "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+                      "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" or
+                      "fsl,imx6q-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -15,6 +16,10 @@ Optional properties:
 - clocks            : a list of phandle + clock specifier pairs
 - target-supply     : regulator for SATA target power
 
+"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
+- clocks            : must contain the sata, sata_ref and ahb clocks
+- clock-names       : must contain "ahb" for the ahb clock
+
 Examples:
         sata@ffe08000 {
 		compatible = "snps,spear-ahci";