can: peak: add support for PEAK PCAN-PCIe FD CAN-FD boards

This patch adds the support of the PCAN-PCI Express FD boards made
by PEAK-System, for computers using the PCI Express slot.

The PCAN-PCI Express FD has one or two CAN FD channels, depending
on the model. A galvanic isolation of the CAN ports protects
the electronics of the card and the respective computer against
disturbances of up to 500 Volts. The PCAN-PCI Express FD can be operated
with ambient temperatures in a range of -40 to +85 °C.

Such boards run an extented version of the CAN-FD IP running into USB
CAN-FD interfaces from PEAK-System, so this patch adds several new commands
and their corresponding data types to the PEAK CAN-FD common definitions
header file too.

Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/Kconfig

@@ -142,6 +142,7 @@ source "drivers/net/can/cc770/Kconfig"
 source "drivers/net/can/ifi_canfd/Kconfig"
 source "drivers/net/can/m_can/Kconfig"
 source "drivers/net/can/mscan/Kconfig"
+source "drivers/net/can/peak_canfd/Kconfig"
 source "drivers/net/can/rcar/Kconfig"
 source "drivers/net/can/sja1000/Kconfig"
 source "drivers/net/can/softing/Kconfig"

drivers/net/can/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_CAN_IFI_CANFD)	+= ifi_canfd/
 obj-$(CONFIG_CAN_JANZ_ICAN3)	+= janz-ican3.o
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_M_CAN)		+= m_can/
+obj-$(CONFIG_CAN_PEAK_PCIEFD)	+= peak_canfd/
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_SUN4I)		+= sun4i_can.o
 obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o

drivers/net/can/peak_canfd/Kconfig

@@ -0,0 +1,13 @@
+config CAN_PEAK_PCIEFD
+	depends on PCI
+	tristate "PEAK-System PCAN-PCIe FD cards"
+	---help---
+	  This driver adds support for the PEAK-System PCI Express FD
+	  CAN-FD cards family.
+	  These 1x or 2x CAN-FD channels cards offer CAN 2.0 a/b as well as
+	  CAN-FD access to the CAN bus. Besides the nominal bitrate of up to
+	  1 Mbit/s, the data bytes of CAN-FD frames can be transmitted with
+	  up to 12 Mbit/s. A galvanic isolation of the CAN ports protects the
+	  electronics of the card and the respective computer against
+	  disturbances of up to 500 Volts. The PCAN-PCI Express FD can be
+	  operated with ambient temperatures in a range of -40 to +85 °C.

drivers/net/can/peak_canfd/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for the PEAK-System CAN-FD IP module drivers
+#
+obj-$(CONFIG_CAN_PEAK_PCIEFD) += peak_pciefd.o
+peak_pciefd-y := peak_pciefd_main.o peak_canfd.o

drivers/net/can/peak_canfd/peak_canfd_user.h

@@ -0,0 +1,55 @@
+/*
+ * CAN driver for PEAK System micro-CAN based adapters
+ *
+ * Copyright (C) 2003-2011 PEAK System-Technik GmbH
+ * Copyright (C) 2011-2013 Stephane Grosjean <s.grosjean@peak-system.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef PEAK_CANFD_USER_H
+#define PEAK_CANFD_USER_H
+
+#include <linux/can/dev/peak_canfd.h>
+
+#define PCANFD_ECHO_SKB_DEF		-1
+
+/* data structure private to each uCAN interface */
+struct peak_canfd_priv {
+	struct can_priv can;		/* socket-can private data */
+	struct net_device *ndev;	/* network device */
+	int index;			/* channel index */
+
+	struct can_berr_counter bec;	/* rx/tx err counters */
+
+	int echo_idx;			/* echo skb free slot index */
+	spinlock_t echo_lock;
+
+	int cmd_len;
+	void *cmd_buffer;
+	int cmd_maxlen;
+
+	int (*pre_cmd)(struct peak_canfd_priv *priv);
+	int (*write_cmd)(struct peak_canfd_priv *priv);
+	int (*post_cmd)(struct peak_canfd_priv *priv);
+
+	int (*enable_tx_path)(struct peak_canfd_priv *priv);
+	void *(*alloc_tx_msg)(struct peak_canfd_priv *priv, u16 msg_size,
+			      int *room_left);
+	int (*write_tx_msg)(struct peak_canfd_priv *priv,
+			    struct pucan_tx_msg *msg);
+};
+
+struct net_device *alloc_peak_canfd_dev(int sizeof_priv, int index,
+					int echo_skb_max);
+int peak_canfd_handle_msg(struct peak_canfd_priv *priv,
+			  struct pucan_rx_msg *msg);
+int peak_canfd_handle_msgs_list(struct peak_canfd_priv *priv,
+				struct pucan_rx_msg *rx_msg, int rx_count);
+#endif

include/linux/can/dev/peak_canfd.h

@@ -23,11 +23,14 @@
 #define PUCAN_CMD_LISTEN_ONLY_MODE	0x003
 #define PUCAN_CMD_TIMING_SLOW		0x004
 #define PUCAN_CMD_TIMING_FAST		0x005
+#define PUCAN_CMD_SET_STD_FILTER	0x006
+#define PUCAN_CMD_RESERVED2		0x007
 #define PUCAN_CMD_FILTER_STD		0x008
 #define PUCAN_CMD_TX_ABORT		0x009
 #define PUCAN_CMD_WR_ERR_CNT		0x00a
 #define PUCAN_CMD_SET_EN_OPTION		0x00b
 #define PUCAN_CMD_CLR_DIS_OPTION	0x00c
+#define PUCAN_CMD_RX_BARRIER		0x010
 #define PUCAN_CMD_END_OF_COLLECTION	0x3ff
 
 /* uCAN received messages list */
@@ -35,6 +38,10 @@
 #define PUCAN_MSG_ERROR			0x0002
 #define PUCAN_MSG_STATUS		0x0003
 #define PUCAN_MSG_BUSLOAD		0x0004
+
+#define PUCAN_MSG_CACHE_CRITICAL	0x0102
+
+/* uCAN transmitted messages */
 #define PUCAN_MSG_CAN_TX		0x1000
 
 /* uCAN command common header */
@@ -43,6 +50,12 @@ struct __packed pucan_command {
 	u16	args[3];
 };
 
+/* return the opcode from the opcode_channel field of a command */
+static inline u16 pucan_cmd_get_opcode(struct pucan_command *c)
+{
+	return le16_to_cpu(c->opcode_channel) & 0x3ff;
+}
+
 #define PUCAN_TSLOW_BRP_BITS		10
 #define PUCAN_TSLOW_TSGEG1_BITS		8
 #define PUCAN_TSLOW_TSGEG2_BITS		7
@@ -108,6 +121,27 @@ struct __packed pucan_filter_std {
 	__le32	mask;		/* CAN-ID bitmask in idx range */
 };
 
+#define PUCAN_FLTSTD_ROW_IDX_MAX	((1 << PUCAN_FLTSTD_ROW_IDX_BITS) - 1)
+
+/* uCAN SET_STD_FILTER command fields */
+struct __packed pucan_std_filter {
+	__le16	opcode_channel;
+
+	u8	unused;
+	u8	idx;
+	__le32	mask;		/* CAN-ID bitmask in idx range */
+};
+
+/* uCAN TX_ABORT commands fields */
+#define PUCAN_TX_ABORT_FLUSH		0x0001
+
+struct __packed pucan_tx_abort {
+	__le16	opcode_channel;
+
+	__le16	flags;
+	u32	unused;
+};
+
 /* uCAN WR_ERR_CNT command fields */
 #define PUCAN_WRERRCNT_TE		0x4000	/* Tx error cntr write Enable */
 #define PUCAN_WRERRCNT_RE		0x8000	/* Rx error cntr write Enable */
@@ -184,6 +218,12 @@ struct __packed pucan_error_msg {
 	u8	rx_err_cnt;
 };
 
+static inline int pucan_error_get_channel(const struct pucan_error_msg *msg)
+{
+	return msg->channel_type_d & 0x0f;
+}
+
+#define PUCAN_RX_BARRIER		0x10
 #define PUCAN_BUS_PASSIVE		0x20
 #define PUCAN_BUS_WARNING		0x40
 #define PUCAN_BUS_BUSOFF		0x80
@@ -197,6 +237,31 @@ struct __packed pucan_status_msg {
 	u8	unused[3];
 };
 
+static inline int pucan_status_get_channel(const struct pucan_status_msg *msg)
+{
+	return msg->channel_p_w_b & 0x0f;
+}
+
+static inline int pucan_status_is_rx_barrier(const struct pucan_status_msg *msg)
+{
+	return msg->channel_p_w_b & PUCAN_RX_BARRIER;
+}
+
+static inline int pucan_status_is_passive(const struct pucan_status_msg *msg)
+{
+	return msg->channel_p_w_b & PUCAN_BUS_PASSIVE;
+}
+
+static inline int pucan_status_is_warning(const struct pucan_status_msg *msg)
+{
+	return msg->channel_p_w_b & PUCAN_BUS_WARNING;
+}
+
+static inline int pucan_status_is_busoff(const struct pucan_status_msg *msg)
+{
+	return msg->channel_p_w_b & PUCAN_BUS_BUSOFF;
+}
+
 /* uCAN transmitted message format */
 #define PUCAN_MSG_CHANNEL_DLC(c, d)	(((c) & 0xf) | ((d) << 4))