Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits)
  siimage: coding style cleanup (take 2)
  ide-cd: clean up cdrom_analyze_sense_data()
  ide-cd: fix test unsigned var < 0
  ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]
  piix: add Asus Eee 701 controller to short cable list
  ARM: always select HAVE_IDE
  remove the broken ETRAX_IDE driver
  ide: remove ->dma_prdtable field from ide_hwif_t
  ide: remove ->dma_vendor{1,3} fields from ide_hwif_t
  scc_pata: add ->dma_host_set and ->dma_start methods
  ide: skip "VLB sync" if host uses MMIO
  ide: add ide_pad_transfer() helper
  ide: remove ->INW and ->OUTW methods
  ide: use IDE I/O helpers directly in ide_tf_{load,read}()
  ns87415: add ->tf_read method
  scc_pata: add ->tf_{load,read} methods
  ide-h8300: add ->tf_{load,read} methods
  ide-cris: add ->tf_{load,read} methods
  ide: add ->tf_load and ->tf_read methods
  ide: move ide_tf_{load,read} to ide-iops.c
  ...

arch/arm/Kconfig

@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config ARM
 	bool
 	default y
+	select HAVE_IDE
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
@@ -223,7 +224,6 @@ config ARCH_CLPS7500
 	select TIMER_ACORN
 	select ISA
 	select NO_IOPORT
-	select HAVE_IDE
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -236,7 +236,6 @@ config ARCH_CO285
 	bool "Co-EBSA285"
 	select FOOTBRIDGE
 	select FOOTBRIDGE_ADDIN
-	select HAVE_IDE
 	help
 	  Support for Intel's EBSA285 companion chip.
 
@@ -262,7 +261,6 @@ config ARCH_EP93XX
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select FOOTBRIDGE
-	select HAVE_IDE
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -301,7 +299,6 @@ config ARCH_IOP32X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
-	select HAVE_IDE
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -311,14 +308,12 @@ config ARCH_IOP33X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
-	select HAVE_IDE
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
 config ARCH_IXP23XX
  	bool "IXP23XX-based"
 	depends on MMU
-	select HAVE_IDE
  	select PCI
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
@@ -336,14 +331,12 @@ config ARCH_IXP4XX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_L7200
 	bool "LinkUp-L7200"
 	select FIQ
-	select HAVE_IDE
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
 	  L7200 Software Development Board which uses an ARM720T processor.
@@ -400,7 +393,6 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_IDE
 	select HAVE_GPIO_LIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -416,7 +408,6 @@ config ARCH_RPC
 	select ARCH_MAY_HAVE_PC_FDC
 	select ISA_DMA_API
 	select NO_IOPORT
-	select HAVE_IDE
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -432,7 +423,6 @@ config ARCH_SA1100
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
-	select HAVE_IDE
 	select HAVE_GPIO_LIB
 	help
 	  Support for StrongARM 11x0 based boards.
@@ -440,7 +430,6 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
-	select HAVE_IDE
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -448,7 +437,6 @@ config ARCH_S3C2410
 
 config ARCH_SHARK
 	bool "Shark"
-	select HAVE_IDE
 	select ISA
 	select ISA_DMA
 	select PCI
@@ -458,7 +446,6 @@ config ARCH_SHARK
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
-	select HAVE_IDE
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T

drivers/ide/Kconfig

@@ -862,40 +862,6 @@ config BLK_DEV_IDE_BAST
 	  Say Y here if you want to support the onboard IDE channels on the
 	  Simtec BAST or the Thorcom VR1000
 
-config ETRAX_IDE
-	tristate "ETRAX IDE support"
-	depends on CRIS && BROKEN
-	select BLK_DEV_IDEDMA
-	help
-	  Enables the ETRAX IDE driver.
-
-	  You can't use parallel ports or SCSI ports at the same time.
-
-config ETRAX_IDE_DELAY
-	int "Delay for drives to regain consciousness"
-	depends on ETRAX_IDE && ETRAX_ARCH_V10
-	default 15
-	help
-	  Number of seconds to wait for IDE drives to spin up after an IDE
-	  reset.
-
-choice
-	prompt "IDE reset pin"
-	depends on ETRAX_IDE && ETRAX_ARCH_V10
-	default ETRAX_IDE_PB7_RESET
-
-config ETRAX_IDE_PB7_RESET
-	bool "Port_PB_Bit_7"
-	help
-	  IDE reset on pin 7 on port B
-
-config ETRAX_IDE_G27_RESET
-	bool "Port_G_Bit_27"
-	help
-	  IDE reset on pin 27 on port G
-
-endchoice
-
 config IDE_H8300
 	tristate "H8300 IDE support"
 	depends on H8300

drivers/ide/Makefile

@@ -35,7 +35,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
 	obj-y += cmd640-core.o
 endif
 
-obj-$(CONFIG_BLK_DEV_IDE)		+= cris/ ppc/
+obj-$(CONFIG_BLK_DEV_IDE)		+= ppc/
 obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o

drivers/ide/arm/icside.c

@@ -483,7 +483,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
 	.port_ops		= &icside_v6_no_dma_port_ops,
 	.dma_ops		= &icside_v6_dma_ops,
-	.host_flags		= IDE_HFLAG_SERIALIZE,
+	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
 };

drivers/ide/arm/palm_bk3710.c

@@ -342,6 +342,7 @@ static const struct ide_port_ops palm_bk3710_ports_ops = {
 static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.init_dma		= palm_bk3710_init_dma,
 	.port_ops		= &palm_bk3710_ports_ops,
+	.host_flags		= IDE_HFLAG_MMIO,
 	.pio_mask		= ATA_PIO4,
 	.udma_mask		= ATA_UDMA4,	/* (input clk 99MHz) */
 	.mwdma_mask		= ATA_MWDMA2,

drivers/ide/arm/rapide.c

@@ -53,6 +53,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 		ide_init_port_hw(hwif, &hw);
 
+		hwif->host_flags = IDE_HFLAG_MMIO;
 		default_hwif_mmiops(hwif);
 
 		idx[0] = hwif->index;

drivers/ide/cris/Makefile

@@ -1,3 +0,0 @@
-EXTRA_CFLAGS				+= -Idrivers/ide
-
-obj-$(CONFIG_IDE_ETRAX)			+= ide-cris.o

drivers/ide/h8300/ide-h8300.c

@@ -42,6 +42,91 @@ static u16 mm_inw(unsigned long a)
 	return r;
 }
 
+static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	ide_set_irq(drive, 1);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA)
+		mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		outb((tf->device & HIHI) | drive->select.all,
+		     io_ports->device_addr);
+}
+
+static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data = mm_inw(io_ports->data_addr);
+
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = inb(io_ports->lbah_addr);
+	}
+}
+
 static void mm_outsw(unsigned long addr, void *buf, u32 len)
 {
 	unsigned short *bp = (unsigned short *)buf;
@@ -56,6 +141,18 @@ static void mm_insw(unsigned long addr, void *buf, u32 len)
 		*bp = bswap(*(volatile u16 *)addr);
 }
 
+static void h8300_input_data(ide_drive_t *drive, struct request *rq,
+			     void *buf, unsigned int len)
+{
+	mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
+static void h8300_output_data(ide_drive_t *drive, struct request *rq,
+			      void *buf, unsigned int len)
+{
+	mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
+}
+
 #define H8300_IDE_GAP (2)
 
 static inline void hw_setup(hw_regs_t *hw)
@@ -74,12 +171,11 @@ static inline void hwif_setup(ide_hwif_t *hwif)
 {
 	default_hwif_iops(hwif);
 
-	hwif->OUTW  = mm_outw;
-	hwif->OUTSW = mm_outsw;
-	hwif->INW   = mm_inw;
-	hwif->INSW  = mm_insw;
-	hwif->OUTSL = NULL;
-	hwif->INSL  = NULL;
+	hwif->tf_load = h8300_tf_load;
+	hwif->tf_read = h8300_tf_read;
+
+	hwif->input_data  = h8300_input_data;
+	hwif->output_data = h8300_output_data;
 }
 
 static int __init h8300_ide_init(void)

drivers/ide/ide-cd.c

@@ -142,7 +142,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 {
 	unsigned long sector;
 	unsigned long bio_sectors;
-	unsigned long valid;
 	struct cdrom_info *info = drive->driver_data;
 
 	if (!cdrom_log_sense(drive, failed_command, sense))
@@ -173,17 +172,13 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
 				 (sense->information[2] <<  8) |
 				 (sense->information[3]);
 
-			bio_sectors = bio_sectors(failed_command->bio);
-			if (bio_sectors < 4)
-				bio_sectors = 4;
 			if (drive->queue->hardsect_size == 2048)
 				/* device sector size is 2K */
 				sector <<= 2;
-			sector &= ~(bio_sectors - 1);
-			valid = (sector - failed_command->sector) << 9;
 
-			if (valid < 0)
-				valid = 0;
+			bio_sectors = max(bio_sectors(failed_command->bio), 4U);
+			sector &= ~(bio_sectors - 1);
+
 			if (sector < get_capacity(info->disk) &&
 			    drive->probed_capacity - sector < 4 * 75)
 				set_capacity(info->disk, sector);
@@ -555,14 +550,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 				    ATAPI_WAIT_PC, cdrom_timer_expiry);
 		return ide_started;
 	} else {
-		unsigned long flags;
-
-		/* packet command */
-		spin_lock_irqsave(&ide_lock, flags);
-		hwif->OUTBSYNC(drive, WIN_PACKETCMD,
-			       hwif->io_ports.command_addr);
-		ndelay(400);
-		spin_unlock_irqrestore(&ide_lock, flags);
+		ide_execute_pkt_cmd(drive);
 
 		return (*handler) (drive);
 	}
@@ -613,7 +601,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
 		cmd_len = ATAPI_MIN_CDB_BYTES;
 
 	/* send the command to the device */
-	HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
+	hwif->output_data(drive, NULL, rq->cmd, cmd_len);
 
 	/* start the DMA if need be */
 	if (info->dma)
@@ -629,7 +617,7 @@ static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
 {
 	while (len > 0) {
 		int dum = 0;
-		xf(drive, &dum, sizeof(dum));
+		xf(drive, NULL, &dum, sizeof(dum));
 		len -= sizeof(dum);
 	}
 }
@@ -639,7 +627,7 @@ static void ide_cd_drain_data(ide_drive_t *drive, int nsects)
 	while (nsects > 0) {
 		static char dum[SECTOR_SIZE];
 
-		drive->hwif->atapi_input_bytes(drive, dum, sizeof(dum));
+		drive->hwif->input_data(drive, NULL, dum, sizeof(dum));
 		nsects--;
 	}
 }
@@ -666,7 +654,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
 		printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
 				drive->name, __func__);
 
-		xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes;
+		xf = rw ? hwif->output_data : hwif->input_data;
 		ide_cd_pad_transfer(drive, xf, len);
 	} else  if (rw == 0 && ireason == 1) {
 		/*
@@ -1019,10 +1007,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 
 	if (ireason == 0) {
 		write = 1;
-		xferfunc = HWIF(drive)->atapi_output_bytes;
+		xferfunc = hwif->output_data;
 	} else {
 		write = 0;
-		xferfunc = HWIF(drive)->atapi_input_bytes;
+		xferfunc = hwif->input_data;
 	}
 
 	/* transfer data */
@@ -1061,7 +1049,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		if (blen > thislen)
 			blen = thislen;
 
-		xferfunc(drive, ptr, blen);
+		xferfunc(drive, NULL, ptr, blen);
 
 		thislen -= blen;
 		len -= blen;

drivers/ide/ide-dma.c

@@ -464,9 +464,10 @@ int ide_dma_setup(ide_drive_t *drive)
 
 	/* PRD table */
 	if (hwif->mmio)
-		writel(hwif->dmatable_dma, (void __iomem *)hwif->dma_prdtable);
+		writel(hwif->dmatable_dma,
+		       (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
 	else
-		outl(hwif->dmatable_dma, hwif->dma_prdtable);
+		outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
 
 	/* specify r/w */
 	hwif->OUTB(reading, hwif->dma_command);
@@ -858,14 +859,8 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base)
 
 	if (!hwif->dma_command)
 		hwif->dma_command	= hwif->dma_base + 0;
-	if (!hwif->dma_vendor1)
-		hwif->dma_vendor1	= hwif->dma_base + 1;
 	if (!hwif->dma_status)
 		hwif->dma_status	= hwif->dma_base + 2;
-	if (!hwif->dma_vendor3)
-		hwif->dma_vendor3	= hwif->dma_base + 3;
-	if (!hwif->dma_prdtable)
-		hwif->dma_prdtable	= hwif->dma_base + 4;
 
 	hwif->dma_ops = &sff_dma_ops;
 }

drivers/ide/ide-floppy.c

@@ -231,6 +231,7 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
 static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 				  unsigned int bcount, int direction)
 {
+	ide_hwif_t *hwif = drive->hwif;
 	struct request *rq = pc->rq;
 	struct req_iterator iter;
 	struct bio_vec *bvec;
@@ -246,9 +247,9 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 
 		data = bvec_kmap_irq(bvec, &flags);
 		if (direction)
-			drive->hwif->atapi_output_bytes(drive, data, count);
+			hwif->output_data(drive, NULL, data, count);
 		else
-			drive->hwif->atapi_input_bytes(drive, data, count);
+			hwif->input_data(drive, NULL, data, count);
 		bvec_kunmap_irq(data, &flags);
 
 		bcount -= count;
@@ -261,10 +262,7 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 	if (bcount) {
 		printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
 				drive->name, __func__, bcount);
-		if (direction)
-			ide_atapi_write_zeros(drive, bcount);
-		else
-			ide_atapi_discard_data(drive, bcount);
+		ide_pad_transfer(drive, direction, bcount);
 	}
 }
 
@@ -490,7 +488,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
 				printk(KERN_ERR "ide-floppy: The floppy wants "
 					"to send us more data than expected "
 					"- discarding data\n");
-				ide_atapi_discard_data(drive, bcount);
+				ide_pad_transfer(drive, 0, bcount);
 
 				ide_set_handler(drive,
 						&idefloppy_pc_intr,
@@ -503,12 +501,12 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
 		}
 	}
 	if (pc->flags & PC_FLAG_WRITING)
-		xferfunc = hwif->atapi_output_bytes;
+		xferfunc = hwif->output_data;
 	else
-		xferfunc = hwif->atapi_input_bytes;
+		xferfunc = hwif->input_data;
 
 	if (pc->buf)
-		xferfunc(drive, pc->cur_pos, bcount);
+		xferfunc(drive, NULL, pc->cur_pos, bcount);
 	else
 		ide_floppy_io_buffers(drive, pc, bcount,
 				      !!(pc->flags & PC_FLAG_WRITING));
@@ -548,8 +546,10 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
 
 	/* Set the interrupt routine */
 	ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
+
 	/* Send the actual packet */
-	HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+	hwif->output_data(drive, NULL, floppy->pc->c, 12);
+
 	return ide_started;
 }
 
@@ -569,7 +569,8 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive)
 	idefloppy_floppy_t *floppy = drive->driver_data;
 
 	/* Send the actual packet */
-	HWIF(drive)->atapi_output_bytes(drive, floppy->pc->c, 12);
+	drive->hwif->output_data(drive, NULL, floppy->pc->c, 12);
+
 	/* Timeout for the packet command */
 	return IDEFLOPPY_WAIT_CMD;
 }
@@ -692,7 +693,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
 		return ide_started;
 	} else {
 		/* Issue the packet command */
-		hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+		ide_execute_pkt_cmd(drive);
 		return (*pkt_xfer_routine) (drive);
 	}
 }

drivers/ide/ide-io.c

@@ -295,49 +295,6 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
 
-void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	struct ide_taskfile *tf = &task->tf;
-
-	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
-		u16 data = hwif->INW(io_ports->data_addr);
-
-		tf->data = data & 0xff;
-		tf->hob_data = (data >> 8) & 0xff;
-	}
-
-	/* be sure we're looking at the low order bits */
-	hwif->OUTB(drive->ctl & ~0x80, io_ports->ctl_addr);
-
-	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
-		tf->nsect  = hwif->INB(io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
-		tf->lbal   = hwif->INB(io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
-		tf->lbam   = hwif->INB(io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
-		tf->lbah   = hwif->INB(io_ports->lbah_addr);
-	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
-		tf->device = hwif->INB(io_ports->device_addr);
-
-	if (task->tf_flags & IDE_TFLAG_LBA48) {
-		hwif->OUTB(drive->ctl | 0x80, io_ports->ctl_addr);
-
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
-			tf->hob_feature = hwif->INB(io_ports->feature_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
-			tf->hob_nsect   = hwif->INB(io_ports->nsect_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
-			tf->hob_lbal    = hwif->INB(io_ports->lbal_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
-			tf->hob_lbam    = hwif->INB(io_ports->lbam_addr);
-		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
-			tf->hob_lbah    = hwif->INB(io_ports->lbah_addr);
-	}
-}
-
 /**
  *	ide_end_drive_cmd	-	end an explicit drive command
  *	@drive: command 
@@ -373,7 +330,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 			tf->error = err;
 			tf->status = stat;
 
-			ide_tf_read(drive, task);
+			drive->hwif->tf_read(drive, task);
 
 			if (task->tf_flags & IDE_TFLAG_DYN)
 				kfree(task);
@@ -422,7 +379,7 @@ static void try_to_flush_leftover_data (ide_drive_t *drive)
 		u32 wcount = (i > 16) ? 16 : i;
 
 		i -= wcount;
-		HWIF(drive)->ata_input_data(drive, buffer, wcount);
+		drive->hwif->input_data(drive, NULL, buffer, wcount * 4);
 	}
 }
 
@@ -502,7 +459,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
 
 	if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
 		/* force an abort */
-		hwif->OUTB(WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr);
+		hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE,
+			       hwif->io_ports.command_addr);
 
 	if (rq->errors >= ERROR_MAX) {
 		ide_kill_rq(drive, rq);
@@ -1679,7 +1637,23 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
 	task.tf.lbam    = bcount & 0xff;
 	task.tf.lbah    = (bcount >> 8) & 0xff;
 
-	ide_tf_load(drive, &task);
+	ide_tf_dump(drive->name, &task.tf);
+	drive->hwif->tf_load(drive, &task);
 }
 
 EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
+
+void ide_pad_transfer(ide_drive_t *drive, int write, int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 buf[4] = { 0 };
+
+	while (len > 0) {
+		if (write)
+			hwif->output_data(drive, NULL, buf, min(4, len));
+		else
+			hwif->input_data(drive, NULL, buf, min(4, len));
+		len -= 4;
+	}
+}
+EXPORT_SYMBOL_GPL(ide_pad_transfer);

drivers/ide/ide-iops.c

@@ -37,21 +37,6 @@ static u8 ide_inb (unsigned long port)
 	return (u8) inb(port);
 }
 
-static u16 ide_inw (unsigned long port)
-{
-	return (u16) inw(port);
-}
-
-static void ide_insw (unsigned long port, void *addr, u32 count)
-{
-	insw(port, addr, count);
-}
-
-static void ide_insl (unsigned long port, void *addr, u32 count)
-{
-	insl(port, addr, count);
-}
-
 static void ide_outb (u8 val, unsigned long port)
 {
 	outb(val, port);
@@ -62,32 +47,11 @@ static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port)
 	outb(addr, port);
 }
 
-static void ide_outw (u16 val, unsigned long port)
-{
-	outw(val, port);
-}
-
-static void ide_outsw (unsigned long port, void *addr, u32 count)
-{
-	outsw(port, addr, count);
-}
-
-static void ide_outsl (unsigned long port, void *addr, u32 count)
-{
-	outsl(port, addr, count);
-}
-
 void default_hwif_iops (ide_hwif_t *hwif)
 {
 	hwif->OUTB	= ide_outb;
 	hwif->OUTBSYNC	= ide_outbsync;
-	hwif->OUTW	= ide_outw;
-	hwif->OUTSW	= ide_outsw;
-	hwif->OUTSL	= ide_outsl;
 	hwif->INB	= ide_inb;
-	hwif->INW	= ide_inw;
-	hwif->INSW	= ide_insw;
-	hwif->INSL	= ide_insl;
 }
 
 /*
@@ -99,21 +63,6 @@ static u8 ide_mm_inb (unsigned long port)
 	return (u8) readb((void __iomem *) port);
 }
 
-static u16 ide_mm_inw (unsigned long port)
-{
-	return (u16) readw((void __iomem *) port);
-}
-
-static void ide_mm_insw (unsigned long port, void *addr, u32 count)
-{
-	__ide_mm_insw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_insl (unsigned long port, void *addr, u32 count)
-{
-	__ide_mm_insl((void __iomem *) port, addr, count);
-}
-
 static void ide_mm_outb (u8 value, unsigned long port)
 {
 	writeb(value, (void __iomem *) port);
@@ -124,34 +73,13 @@ static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port)
 	writeb(value, (void __iomem *) port);
 }
 
-static void ide_mm_outw (u16 value, unsigned long port)
-{
-	writew(value, (void __iomem *) port);
-}
-
-static void ide_mm_outsw (unsigned long port, void *addr, u32 count)
-{
-	__ide_mm_outsw((void __iomem *) port, addr, count);
-}
-
-static void ide_mm_outsl (unsigned long port, void *addr, u32 count)
-{
-	__ide_mm_outsl((void __iomem *) port, addr, count);
-}
-
 void default_hwif_mmiops (ide_hwif_t *hwif)
 {
 	hwif->OUTB	= ide_mm_outb;
 	/* Most systems will need to override OUTBSYNC, alas however
 	   this one is controller specific! */
 	hwif->OUTBSYNC	= ide_mm_outbsync;
-	hwif->OUTW	= ide_mm_outw;
-	hwif->OUTSW	= ide_mm_outsw;
-	hwif->OUTSL	= ide_mm_outsl;
 	hwif->INB	= ide_mm_inb;
-	hwif->INW	= ide_mm_inw;
-	hwif->INSW	= ide_mm_insw;
-	hwif->INSL	= ide_mm_insl;
 }
 
 EXPORT_SYMBOL(default_hwif_mmiops);
@@ -175,6 +103,123 @@ void SELECT_MASK (ide_drive_t *drive, int mask)
 		port_ops->maskproc(drive, mask);
 }
 
+static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	void (*tf_outb)(u8 addr, unsigned long port);
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (mmio)
+		tf_outb = ide_mm_outb;
+	else
+		tf_outb = ide_outb;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	ide_set_irq(drive, 1);
+
+	if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
+		SELECT_MASK(drive, 0);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		if (mmio)
+			writew(data, (void __iomem *)io_ports->data_addr);
+		else
+			outw(data, io_ports->data_addr);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		tf_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		tf_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		tf_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		tf_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		tf_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		tf_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		tf_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		tf_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		tf_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		tf_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		tf_outb((tf->device & HIHI) | drive->select.all,
+			 io_ports->device_addr);
+}
+
+static void ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	void (*tf_outb)(u8 addr, unsigned long port);
+	u8 (*tf_inb)(unsigned long port);
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+
+	if (mmio) {
+		tf_outb = ide_mm_outb;
+		tf_inb  = ide_mm_inb;
+	} else {
+		tf_outb = ide_outb;
+		tf_inb  = ide_inb;
+	}
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		if (mmio)
+			data = readw((void __iomem *)io_ports->data_addr);
+		else
+			data = inw(io_ports->data_addr);
+
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = tf_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = tf_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = tf_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = tf_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = tf_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		tf_outb(drive->ctl | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = tf_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = tf_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = tf_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = tf_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = tf_inb(io_ports->lbah_addr);
+	}
+}
+
 /*
  * Some localbus EIDE interfaces require a special access sequence
  * when using 32-bit I/O instructions to transfer data.  We call this
@@ -182,109 +227,112 @@ void SELECT_MASK (ide_drive_t *drive, int mask)
  * of the sector count register location, with interrupts disabled
  * to ensure that the reads all happen together.
  */
-static void ata_vlb_sync(ide_drive_t *drive, unsigned long port)
+static void ata_vlb_sync(unsigned long port)
 {
-	(void) HWIF(drive)->INB(port);
-	(void) HWIF(drive)->INB(port);
-	(void) HWIF(drive)->INB(port);
+	(void)inb(port);
+	(void)inb(port);
+	(void)inb(port);
 }
 
 /*
  * This is used for most PIO data transfers *from* the IDE interface
+ *
+ * These routines will round up any request for an odd number of bytes,
+ * so if an odd len is specified, be sure that there's at least one
+ * extra byte allocated for the buffer.
  */
-static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount)
+static void ata_input_data(ide_drive_t *drive, struct request *rq,
+			   void *buf, unsigned int len)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	unsigned long data_addr = io_ports->data_addr;
 	u8 io_32bit = drive->io_32bit;
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+
+	len++;
 
 	if (io_32bit) {
-		if (io_32bit & 2) {
-			unsigned long flags;
+		unsigned long uninitialized_var(flags);
 
+		if ((io_32bit & 2) && !mmio) {
 			local_irq_save(flags);
-			ata_vlb_sync(drive, io_ports->nsect_addr);
-			hwif->INSL(io_ports->data_addr, buffer, wcount);
+			ata_vlb_sync(io_ports->nsect_addr);
+		}
+
+		if (mmio)
+			__ide_mm_insl((void __iomem *)data_addr, buf, len / 4);
+		else
+			insl(data_addr, buf, len / 4);
+
+		if ((io_32bit & 2) && !mmio)
 			local_irq_restore(flags);
-		} else
-			hwif->INSL(io_ports->data_addr, buffer, wcount);
-	} else
-		hwif->INSW(io_ports->data_addr, buffer, wcount << 1);
+
+		if ((len & 3) >= 2) {
+			if (mmio)
+				__ide_mm_insw((void __iomem *)data_addr,
+						(u8 *)buf + (len & ~3), 1);
+			else
+				insw(data_addr, (u8 *)buf + (len & ~3), 1);
+		}
+	} else {
+		if (mmio)
+			__ide_mm_insw((void __iomem *)data_addr, buf, len / 2);
+		else
+			insw(data_addr, buf, len / 2);
+	}
 }
 
 /*
  * This is used for most PIO data transfers *to* the IDE interface
  */
-static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount)
+static void ata_output_data(ide_drive_t *drive, struct request *rq,
+			    void *buf, unsigned int len)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	unsigned long data_addr = io_ports->data_addr;
 	u8 io_32bit = drive->io_32bit;
+	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 
 	if (io_32bit) {
-		if (io_32bit & 2) {
-			unsigned long flags;
+		unsigned long uninitialized_var(flags);
 
+		if ((io_32bit & 2) && !mmio) {
 			local_irq_save(flags);
-			ata_vlb_sync(drive, io_ports->nsect_addr);
-			hwif->OUTSL(io_ports->data_addr, buffer, wcount);
+			ata_vlb_sync(io_ports->nsect_addr);
+		}
+
+		if (mmio)
+			__ide_mm_outsl((void __iomem *)data_addr, buf, len / 4);
+		else
+			outsl(data_addr, buf, len / 4);
+
+		if ((io_32bit & 2) && !mmio)
 			local_irq_restore(flags);
-		} else
-			hwif->OUTSL(io_ports->data_addr, buffer, wcount);
-	} else
-		hwif->OUTSW(io_ports->data_addr, buffer, wcount << 1);
-}
 
-/*
- * The following routines are mainly used by the ATAPI drivers.
- *
- * These routines will round up any request for an odd number of bytes,
- * so if an odd bytecount is specified, be sure that there's at least one
- * extra byte allocated for the buffer.
- */
-
-static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-
-	++bytecount;
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
-	if (MACH_IS_ATARI || MACH_IS_Q40) {
-		/* Atari has a byte-swapped IDE interface */
-		insw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2);
-		return;
+		if ((len & 3) >= 2) {
+			if (mmio)
+				__ide_mm_outsw((void __iomem *)data_addr,
+						 (u8 *)buf + (len & ~3), 1);
+			else
+				outsw(data_addr, (u8 *)buf + (len & ~3), 1);
+		}
+	} else {
+		if (mmio)
+			__ide_mm_outsw((void __iomem *)data_addr, buf, len / 2);
+		else
+			outsw(data_addr, buf, len / 2);
 	}
-#endif /* CONFIG_ATARI || CONFIG_Q40 */
-	hwif->ata_input_data(drive, buffer, bytecount / 4);
-	if ((bytecount & 0x03) >= 2)
-		hwif->INSW(hwif->io_ports.data_addr,
-			   (u8 *)buffer + (bytecount & ~0x03), 1);
-}
-
-static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-
-	++bytecount;
-#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
-	if (MACH_IS_ATARI || MACH_IS_Q40) {
-		/* Atari has a byte-swapped IDE interface */
-		outsw_swapw(hwif->io_ports.data_addr, buffer, bytecount / 2);
-		return;
-	}
-#endif /* CONFIG_ATARI || CONFIG_Q40 */
-	hwif->ata_output_data(drive, buffer, bytecount / 4);
-	if ((bytecount & 0x03) >= 2)
-		hwif->OUTSW(hwif->io_ports.data_addr,
-			    (u8 *)buffer + (bytecount & ~0x03), 1);
 }
 
 void default_hwif_transport(ide_hwif_t *hwif)
 {
-	hwif->ata_input_data		= ata_input_data;
-	hwif->ata_output_data		= ata_output_data;
-	hwif->atapi_input_bytes		= atapi_input_bytes;
-	hwif->atapi_output_bytes	= atapi_output_bytes;
+	hwif->tf_load	  = ide_tf_load;
+	hwif->tf_read	  = ide_tf_read;
+
+	hwif->input_data  = ata_input_data;
+	hwif->output_data = ata_output_data;
 }
 
 void ide_fix_driveid (struct hd_driveid *id)
@@ -577,6 +625,8 @@ static const struct drive_list_entry ivb_list[] = {
 	{ "TSSTcorp CDDVDW SH-S202J"	, "SB01"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB00"	},
 	{ "TSSTcorp CDDVDW SH-S202N"	, "SB01"	},
+	{ "TSSTcorp CDDVDW SH-S202H"	, "SB00"	},
+	{ "TSSTcorp CDDVDW SH-S202H"	, "SB01"	},
 	{ NULL				, NULL		}
 };
 
@@ -641,7 +691,7 @@ int ide_driveid_update(ide_drive_t *drive)
 	SELECT_MASK(drive, 1);
 	ide_set_irq(drive, 1);
 	msleep(50);
-	hwif->OUTB(WIN_IDENTIFY, hwif->io_ports.command_addr);
+	hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr);
 	timeout = jiffies + WAIT_WORSTCASE;
 	do {
 		if (time_after(jiffies, timeout)) {
@@ -668,7 +718,7 @@ int ide_driveid_update(ide_drive_t *drive)
 		local_irq_restore(flags);
 		return 0;
 	}
-	hwif->ata_input_data(drive, id, SECTOR_WORDS);
+	hwif->input_data(drive, NULL, id, SECTOR_SIZE);
 	(void)ide_read_status(drive);	/* clear drive IRQ */
 	local_irq_enable();
 	local_irq_restore(flags);
@@ -849,9 +899,19 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
 	ndelay(400);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
-
 EXPORT_SYMBOL(ide_execute_command);
 
+void ide_execute_pkt_cmd(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ide_lock, flags);
+	hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr);
+	ndelay(400);
+	spin_unlock_irqrestore(&ide_lock, flags);
+}
+EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);
 
 /* needed below */
 static ide_startstop_t do_reset1 (ide_drive_t *, int);

drivers/ide/ide-lib.c

@@ -487,7 +487,7 @@ static void ide_dump_sector(ide_drive_t *drive)
 	else
 		task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
 
-	ide_tf_read(drive, &task);
+	drive->hwif->tf_read(drive, &task);
 
 	if (lba48 || (tf->device & ATA_LBA))
 		printk(", LBAsect=%llu",

drivers/ide/ide-probe.c

@@ -124,7 +124,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 
 	id = drive->id;
 	/* read 512 bytes of id info */
-	hwif->ata_input_data(drive, id, SECTOR_WORDS);
+	hwif->input_data(drive, NULL, id, SECTOR_SIZE);
 
 	drive->id_read = 1;
 	local_irq_enable();
@@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
 		hwif->OUTB(0, io_ports->feature_addr);
 
 	/* ask drive for ID */
-	hwif->OUTB(cmd, io_ports->command_addr);
+	hwif->OUTBSYNC(drive, cmd, io_ports->command_addr);
 
 	timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
 	timeout += jiffies;
@@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			msleep(50);
 			hwif->OUTB(drive->select.all, io_ports->device_addr);
 			msleep(50);
-			hwif->OUTB(WIN_SRST, io_ports->command_addr);
+			hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr);
 			(void)ide_busy_sleep(hwif);
 			rc = try_to_identify(drive, cmd);
 		}
@@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive)
 	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
 	SELECT_DRIVE(drive);
 	msleep(50);
-	hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
+	hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr);
 
 	if (ide_busy_sleep(hwif)) {
 		printk(KERN_CONT "failed (timeout)\n");

drivers/ide/ide-tape.c

@@ -395,13 +395,13 @@ static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 		if (bh == NULL) {
 			printk(KERN_ERR "ide-tape: bh == NULL in "
 				"idetape_input_buffers\n");
-			ide_atapi_discard_data(drive, bcount);
+			ide_pad_transfer(drive, 0, bcount);
 			return;
 		}
 		count = min(
 			(unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
 			bcount);
-		HWIF(drive)->atapi_input_bytes(drive, bh->b_data +
+		drive->hwif->input_data(drive, NULL, bh->b_data +
 					atomic_read(&bh->b_count), count);
 		bcount -= count;
 		atomic_add(count, &bh->b_count);
@@ -427,7 +427,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
 			return;
 		}
 		count = min((unsigned int)pc->b_count, (unsigned int)bcount);
-		HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count);
+		drive->hwif->output_data(drive, NULL, pc->b_data, count);
 		bcount -= count;
 		pc->b_data += count;
 		pc->b_count -= count;
@@ -871,7 +871,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				printk(KERN_ERR "ide-tape: The tape wants to "
 					"send us more data than expected "
 					"- discarding data\n");
-				ide_atapi_discard_data(drive, bcount);
+				ide_pad_transfer(drive, 0, bcount);
 				ide_set_handler(drive, &idetape_pc_intr,
 						IDETAPE_WAIT_CMD, NULL);
 				return ide_started;
@@ -880,16 +880,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 				"data than expected - allowing transfer\n");
 		}
 		iobuf = &idetape_input_buffers;
-		xferfunc = hwif->atapi_input_bytes;
+		xferfunc = hwif->input_data;
 	} else {
 		iobuf = &idetape_output_buffers;
-		xferfunc = hwif->atapi_output_bytes;
+		xferfunc = hwif->output_data;
 	}
 
 	if (pc->bh)
 		iobuf(drive, pc, bcount);
 	else
-		xferfunc(drive, pc->cur_pos, bcount);
+		xferfunc(drive, NULL, pc->cur_pos, bcount);
 
 	/* Update the current position */
 	pc->xferred += bcount;
@@ -979,7 +979,8 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 		hwif->dma_ops->dma_start(drive);
 #endif
 	/* Send the actual packet */
-	HWIF(drive)->atapi_output_bytes(drive, pc->c, 12);
+	hwif->output_data(drive, NULL, pc->c, 12);
+
 	return ide_started;
 }
 
@@ -1055,7 +1056,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 				    IDETAPE_WAIT_CMD, NULL);
 		return ide_started;
 	} else {
-		hwif->OUTB(WIN_PACKETCMD, hwif->io_ports.command_addr);
+		ide_execute_pkt_cmd(drive);
 		return idetape_transfer_pc(drive);
 	}
 }

drivers/ide/ide-taskfile.c

@@ -33,60 +33,18 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+void ide_tf_dump(const char *s, struct ide_taskfile *tf)
 {
-	ide_hwif_t *hwif = drive->hwif;
-	struct ide_io_ports *io_ports = &hwif->io_ports;
-	struct ide_taskfile *tf = &task->tf;
-	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
-	if (task->tf_flags & IDE_TFLAG_FLAGGED)
-		HIHI = 0xFF;
-
 #ifdef DEBUG
 	printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x "
 		"lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n",
-		drive->name, tf->feature, tf->nsect, tf->lbal,
+		s, tf->feature, tf->nsect, tf->lbal,
 		tf->lbam, tf->lbah, tf->device, tf->command);
 	printk("%s: hob: nsect 0x%02x lbal 0x%02x "
 		"lbam 0x%02x lbah 0x%02x\n",
-		drive->name, tf->hob_nsect, tf->hob_lbal,
+		s, tf->hob_nsect, tf->hob_lbal,
 		tf->hob_lbam, tf->hob_lbah);
 #endif
-
-	ide_set_irq(drive, 1);
-
-	if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0)
-		SELECT_MASK(drive, 0);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_DATA)
-		hwif->OUTW((tf->hob_data << 8) | tf->data, io_ports->data_addr);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
-		hwif->OUTB(tf->hob_feature, io_ports->feature_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
-		hwif->OUTB(tf->hob_nsect, io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
-		hwif->OUTB(tf->hob_lbal, io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
-		hwif->OUTB(tf->hob_lbam, io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
-		hwif->OUTB(tf->hob_lbah, io_ports->lbah_addr);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
-		hwif->OUTB(tf->feature, io_ports->feature_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
-		hwif->OUTB(tf->nsect, io_ports->nsect_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
-		hwif->OUTB(tf->lbal, io_ports->lbal_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
-		hwif->OUTB(tf->lbam, io_ports->lbam_addr);
-	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
-		hwif->OUTB(tf->lbah, io_ports->lbah_addr);
-
-	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
-		hwif->OUTB((tf->device & HIHI) | drive->select.all,
-			   io_ports->device_addr);
 }
 
 int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
@@ -149,8 +107,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
 	if (task->tf_flags & IDE_TFLAG_FLAGGED)
 		task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS;
 
-	if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0)
-		ide_tf_load(drive, task);
+	if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
+		ide_tf_dump(drive->name, tf);
+		hwif->tf_load(drive, task);
+	}
 
 	switch (task->data_phase) {
 	case TASKFILE_MULTI_OUT:
@@ -283,7 +243,8 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	return stat;
 }
 
-static void ide_pio_sector(ide_drive_t *drive, unsigned int write)
+static void ide_pio_sector(ide_drive_t *drive, struct request *rq,
+			   unsigned int write)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
@@ -323,9 +284,9 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write)
 
 	/* do the actual data transfer */
 	if (write)
-		hwif->ata_output_data(drive, buf, SECTOR_WORDS);
+		hwif->output_data(drive, rq, buf, SECTOR_SIZE);
 	else
-		hwif->ata_input_data(drive, buf, SECTOR_WORDS);
+		hwif->input_data(drive, rq, buf, SECTOR_SIZE);
 
 	kunmap_atomic(buf, KM_BIO_SRC_IRQ);
 #ifdef CONFIG_HIGHMEM
@@ -333,13 +294,14 @@ static void ide_pio_sector(ide_drive_t *drive, unsigned int write)
 #endif
 }
 
-static void ide_pio_multi(ide_drive_t *drive, unsigned int write)
+static void ide_pio_multi(ide_drive_t *drive, struct request *rq,
+			  unsigned int write)
 {
 	unsigned int nsect;
 
 	nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count);
 	while (nsect--)
-		ide_pio_sector(drive, write);
+		ide_pio_sector(drive, rq, write);
 }
 
 static void ide_pio_datablock(ide_drive_t *drive, struct request *rq,
@@ -362,10 +324,10 @@ static void ide_pio_datablock(ide_drive_t *drive, struct request *rq,
 	switch (drive->hwif->data_phase) {
 	case TASKFILE_MULTI_IN:
 	case TASKFILE_MULTI_OUT:
-		ide_pio_multi(drive, write);
+		ide_pio_multi(drive, rq, write);
 		break;
 	default:
-		ide_pio_sector(drive, write);
+		ide_pio_sector(drive, rq, write);
 		break;
 	}
 

drivers/ide/legacy/falconide.c

@@ -44,6 +44,28 @@
 int falconide_intr_lock;
 EXPORT_SYMBOL(falconide_intr_lock);
 
+static void falconide_input_data(ide_drive_t *drive, struct request *rq,
+				 void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+		return insw(data_addr, buf, (len + 1) / 2);
+
+	insw_swapw(data_addr, buf, (len + 1) / 2);
+}
+
+static void falconide_output_data(ide_drive_t *drive, struct request *rq,
+				  void *buf, unsigned int len)
+{
+	unsigned long data_addr = drive->hwif->io_ports.data_addr;
+
+	if (drive->media == ide_disk && rq && rq->cmd_type == REQ_TYPE_FS)
+		return outsw(data_adr, buf, (len + 1) / 2);
+
+	outsw_swapw(data_addr, buf, (len + 1) / 2);
+}
+
 static void __init falconide_setup_ports(hw_regs_t *hw)
 {
 	int i;
@@ -90,6 +112,10 @@ static int __init falconide_init(void)
 		ide_init_port_data(hwif, index);
 		ide_init_port_hw(hwif, &hw);
 
+		/* Atari has a byte-swapped IDE interface */
+		hwif->input_data  = falconide_input_data;
+		hwif->output_data = falconide_output_data;
+
 		ide_get_lock(NULL, NULL);
 		ide_device_add(idx, NULL);
 		ide_release_lock();

drivers/ide/legacy/ide_platform.c

@@ -101,8 +101,10 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 
 	ide_init_port_hw(hwif, &hw);
 
-	if (mmio)
+	if (mmio) {
+		hwif->host_flags = IDE_HFLAG_MMIO;
 		default_hwif_mmiops(hwif);
+	}
 
 	idx[0] = hwif->index;