Merge commit 'origin/master' into next

Manual merge of:
	drivers/char/hvc_console.c
	drivers/char/hvc_console.h
This commit is contained in:
Benjamin Herrenschmidt
2010-02-26 14:41:00 +11:00
286 changed files with 8635 additions and 3381 deletions
-1
View File
@@ -69,7 +69,6 @@ av_permissions.h
bbootsect
bin2c
binkernel.spec
binoffset
bootsect
bounds.h
bsetup
+9
View File
@@ -199,6 +199,10 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_display_output=video
See above.
acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods
early. Needed on some platforms to properly
initialize the EC.
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
@@ -311,6 +315,11 @@ and is between 256 and 4096 characters. It is defined in the file
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
behaviour to be specified. Bit 0 enables warnings,
bit 1 enables fixups, and bit 2 sends a segfault.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
-1
View File
@@ -34,7 +34,6 @@
#include <sys/uio.h>
#include <termios.h>
#include <getopt.h>
#include <zlib.h>
#include <assert.h>
#include <sched.h>
#include <limits.h>
+4 -4
View File
@@ -1074,10 +1074,10 @@ regen_max_retry - INTEGER
Default: 5
max_addresses - INTEGER
Number of maximum addresses per interface. 0 disables limitation.
It is recommended not set too large value (or 0) because it would
be too easy way to crash kernel to allow to create too much of
autoconfigured addresses.
Maximum number of autoconfigured addresses per interface. Setting
to zero disables the limitation. It is not recommended to set this
value too large (or to zero) because it would be an easy way to
crash the kernel by allowing too many addresses to be created.
Default: 16
disable_ipv6 - BOOLEAN
+13 -8
View File
@@ -616,10 +616,10 @@ M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
@@ -641,9 +641,9 @@ T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
@@ -1733,10 +1733,9 @@ F: include/linux/tfrc.h
F: net/dccp/
DECnet NETWORK LAYER
M: Christine Caulfield <christine.caulfield@googlemail.com>
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
S: Orphan
F: Documentation/networking/decnet.txt
F: net/decnet/
@@ -2394,6 +2393,12 @@ L: linuxppc-dev@ozlabs.org
S: Odd Fixes
F: drivers/char/hvc_*
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
@@ -3490,9 +3495,9 @@ S: Maintained
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
M: Lennert Buytenhek <buytenh@marvell.com>
M: Lennert Buytenhek <buytenh@wantstofly.org>
L: netdev@vger.kernel.org
S: Supported
S: Maintained
F: drivers/net/mv643xx_eth.*
F: include/linux/mv643xx.h
+1 -1
View File
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
EXTRAVERSION = -rc8
EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
+2 -1
View File
@@ -42,7 +42,8 @@
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
defined(CONFIG_CPU_ARM1026)
# define MULTI_CACHE 1
#endif
+1
View File
@@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
#endif
#ifdef CONFIG_OUTER_CACHE
struct outer_cache_fns outer_cache;
EXPORT_SYMBOL(outer_cache);
#endif
struct stack {
+2 -2
View File
@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);
+5 -7
View File
@@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *entry;
#ifndef CONFIG_OMAP_MUX
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
#ifdef CONFIG_OMAP_MUX
if (!superset->muxnames || !superset->muxnames[0]) {
superset++;
continue;
}
#endif
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
if (!superset->muxnames || !superset->muxnames[0]) {
#else
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
superset++;
continue;
}
+3
View File
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/moduleparam.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -77,6 +78,8 @@ static unsigned long ai_dword;
static unsigned long ai_multi;
static int ai_usermode;
core_param(alignment, ai_usermode, int, 0600);
#define UM_WARN (1 << 0)
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)
+44 -2
View File
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Thu Jan 28 22:15:54 2010
# Last update: Sat Feb 20 14:16:15 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -2257,7 +2257,7 @@ oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
vexpress MACH_VEXPRESS VEXPRESS 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
@@ -2636,3 +2636,45 @@ hw90240 MACH_HW90240 HW90240 2648
dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
scat110 MACH_SCAT110 SCAT110 2651
acer_a1 MACH_ACER_A1 ACER_A1 2652
cmcontrol MACH_CMCONTROL CMCONTROL 2653
pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654
rfp43 MACH_RFP43 RFP43 2655
sk86r0301 MACH_SK86R0301 SK86R0301 2656
ctpxa MACH_CTPXA CTPXA 2657
epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658
guruplug MACH_GURUPLUG GURUPLUG 2659
spear310 MACH_SPEAR310 SPEAR310 2660
spear320 MACH_SPEAR320 SPEAR320 2661
robotx MACH_ROBOTX ROBOTX 2662
lsxhl MACH_LSXHL LSXHL 2663
smartlite MACH_SMARTLITE SMARTLITE 2664
cws2 MACH_CWS2 CWS2 2665
m619 MACH_M619 M619 2666
smartview MACH_SMARTVIEW SMARTVIEW 2667
lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668
kizbox MACH_KIZBOX KIZBOX 2669
htccharmer MACH_HTCCHARMER HTCCHARMER 2670
guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671
pm9g45 MACH_PM9G45 PM9G45 2672
htcpanther MACH_HTCPANTHER HTCPANTHER 2673
htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674
reb01 MACH_REB01 REB01 2675
aquila MACH_AQUILA AQUILA 2676
spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
surf7x30 MACH_SURF7X30 SURF7X30 2679
micro2440 MACH_MICRO2440 MICRO2440 2680
am2440 MACH_AM2440 AM2440 2681
tq2440 MACH_TQ2440 TQ2440 2682
lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683
ak880x MACH_AK880X AK880X 2684
cobra3530 MACH_COBRA3530 COBRA3530 2685
pmppb MACH_PMPPB PMPPB 2686
u6715 MACH_U6715 U6715 2687
axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688
g30_dvb MACH_G30_DVB G30_DVB 2689
vc088x MACH_VC088X VC088X 2690
mioa702 MACH_MIOA702 MIOA702 2691
hpmin MACH_HPMIN HPMIN 2692
ak880xak MACH_AK880XAK AK880XAK 2693
+1
View File
@@ -94,6 +94,7 @@ ia64_acpi_release_global_lock (unsigned int *lock)
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
+1 -1
View File
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
+1
View File
@@ -130,6 +130,7 @@ config CMDLINE_FORCE
config OF
def_bool y
select OF_FLATTREE
config PROC_DEVICETREE
bool "Support for device tree in /proc"
+1 -1
View File
@@ -217,7 +217,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
* Little endian
*/
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
#define in_le32(a) __le32_to_cpu(__raw_readl(a))
-20
View File
@@ -26,31 +26,11 @@
#include <asm/irq.h>
#include <asm/atomic.h>
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
extern struct device_node *of_chosen;
#define HAVE_ARCH_DEVTREE_FIXUPS
extern struct device_node *allnodes; /* temporary while merging */
extern rwlock_t devtree_lock; /* temporary while merging */
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
extern void of_detach_node(struct device_node *);
/* Other Prototypes */
extern int early_uartlite_console(void);
extern struct resource *request_OF_resource(struct device_node *node,
int index, const char *name_postfix);
extern int release_OF_resource(struct device_node *node, int index);
/*
* OF address retreival & translation
*/
+8 -19
View File
@@ -172,16 +172,15 @@ do { \
/* It is used only first parameter for OP - for wic, wdc */
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
int step = -line_length; \
int count = end - start; \
BUG_ON(count <= 0); \
int volatile temp; \
BUG_ON(end - start <= 0); \
\
__asm__ __volatile__ (" 1: addk %0, %0, %1; \
" #op " %0, r0; \
bgtid %1, 1b; \
addk %1, %1, %2; \
" : : "r" (start), "r" (count), \
"r" (step) : "memory"); \
__asm__ __volatile__ (" 1: " #op " %1, r0; \
cmpu %0, %1, %2; \
bgtid %0, 1b; \
addk %1, %1, %3; \
" : : "r" (temp), "r" (start), "r" (end),\
"r" (line_length) : "memory"); \
} while (0);
static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
@@ -313,16 +312,6 @@ static void __invalidate_dcache_all_wb(void)
pr_debug("%s\n", __func__);
CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
wdc.clear)
#if 0
unsigned int i;
pr_debug("%s\n", __func__);
/* Just loop through cache size and invalidate it */
for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
__invalidate_dcache(0, i);
#endif
}
static void __invalidate_dcache_range_wb(unsigned long start,
+1 -1
View File
@@ -185,7 +185,7 @@ EXPORT_SYMBOL(of_find_device_by_node);
static int of_dev_phandle_match(struct device *dev, void *data)
{
phandle *ph = data;
return to_of_device(dev)->node->linux_phandle == *ph;
return to_of_device(dev)->node->phandle == *ph;
}
struct of_device *of_find_device_by_phandle(phandle ph)
File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More