Merge tag 'v3.7-rc8' into spi/next

Linux 3.7-rc8

CREDITS

@@ -1823,6 +1823,11 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

Documentation/cgroups/memory.txt

@@ -466,6 +466,10 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -8,9 +8,16 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
 Example:
 
-mdio {
+aliases {
+	mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;

Documentation/filesystems/proc.txt

@@ -33,7 +33,7 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@ same system, cpuset, mempolicy, or memory controller resources to use at least
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@ minimal amount of work.
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------

Documentation/networking/netdev-features.txt

@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet.
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.

Documentation/networking/vxlan.txt

@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d show vxlan0
+  # ip -d link show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05
+  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0

MAINTAINERS

@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joerg.roedel@amd.com>
+M:	Joerg Roedel <joro@8bytes.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Supported
+S:	Maintained
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	amd64-microcode@amd64.org
-S:	Supported
+S:	Maintained
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,6 +841,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/IGEP MACHINE SUPPORT
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-omap@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-omap2/board-igep0020.c
+
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2708,10 +2716,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <borislav.petkov@amd.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3598,6 +3606,49 @@ F:	drivers/hid/hid-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
+I2C OVER PARALLEL PORT
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-parport
+F:	Documentation/i2c/busses/i2c-parport-light
+F:	drivers/i2c/busses/i2c-parport.c
+F:	drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-ali1535
+F:	Documentation/i2c/busses/i2c-ali1563
+F:	Documentation/i2c/busses/i2c-ali15x3
+F:	Documentation/i2c/busses/i2c-amd756
+F:	Documentation/i2c/busses/i2c-amd8111
+F:	Documentation/i2c/busses/i2c-i801
+F:	Documentation/i2c/busses/i2c-nforce2
+F:	Documentation/i2c/busses/i2c-piix4
+F:	Documentation/i2c/busses/i2c-sis5595
+F:	Documentation/i2c/busses/i2c-sis630
+F:	Documentation/i2c/busses/i2c-sis96x
+F:	Documentation/i2c/busses/i2c-via
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-ali1535.c
+F:	drivers/i2c/busses/i2c-ali1563.c
+F:	drivers/i2c/busses/i2c-ali15x3.c
+F:	drivers/i2c/busses/i2c-amd756.c
+F:	drivers/i2c/busses/i2c-amd756-s4882.c
+F:	drivers/i2c/busses/i2c-amd8111.c
+F:	drivers/i2c/busses/i2c-i801.c
+F:	drivers/i2c/busses/i2c-isch.c
+F:	drivers/i2c/busses/i2c-nforce2.c
+F:	drivers/i2c/busses/i2c-nforce2-s4985.c
+F:	drivers/i2c/busses/i2c-piix4.c
+F:	drivers/i2c/busses/i2c-sis5595.c
+F:	drivers/i2c/busses/i2c-sis630.c
+F:	drivers/i2c/busses/i2c-sis96x.c
+F:	drivers/i2c/busses/i2c-via.c
+F:	drivers/i2c/busses/i2c-viapro.c
+
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
@@ -3605,9 +3656,8 @@ S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3618,6 +3668,13 @@ F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
+I2C-TAOS-EVM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-taos-evm
+F:	drivers/i2c/busses/i2c-taos-evm.c
+
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -3704,7 +3761,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <petkovbb@gmail.com>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4231,8 +4288,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
+M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5364,7 +5421,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <robert.richter@amd.com>
+M:	Robert Richter <rric@kernel.org>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -7210,6 +7267,14 @@ L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	arch/xtensa/
 
+THERMAL
+M:      Zhang Rui <rui.zhang@intel.com>
+L:      linux-pm@vger.kernel.org
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S:      Supported
+F:      drivers/thermal/
+F:      include/linux/thermal.h
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7887,13 +7952,6 @@ M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
-VIAPRO SMBUS DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-viapro.c
-
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>
@@ -8148,7 +8206,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@amd64.org>
+M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc8
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -1321,10 +1321,12 @@ kernelversion:
 
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------

arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;
 

arch/arm/Kconfig

@@ -547,6 +547,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PCI_QUIRKS
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:

arch/arm/boot/Makefile

@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	$(kecho) '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:

arch/arm/boot/compressed/head.S

@@ -652,6 +652,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 

arch/arm/boot/dts/tegra30.dtsi

@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {

arch/arm/common/timer-sp.c

@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);

arch/arm/mach-at91/at91rm9200_devices.c

@@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-davinci/dm644x.c

@@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
 		break;
 	case VPBE_ENC_CUSTOM_TIMINGS:
 		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
+			v |= DM644X_VPSS_DACCLKEN;
 			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
 		} else {
 			/*