Merge remote-tracking branch 'regulator/topic/core' into regulator-next

Documentation/devicetree/bindings/regulator/regulator.txt

@@ -42,8 +42,16 @@ Optional properties:
 - regulator-state-[mem/disk] node has following common properties:
 	- regulator-on-in-suspend: regulator should be on in suspend state.
 	- regulator-off-in-suspend: regulator should be off in suspend state.
-	- regulator-suspend-microvolt: regulator should be set to this voltage
-	  in suspend.
+	- regulator-suspend-min-microvolt: minimum voltage may be set in
+	  suspend state.
+	- regulator-suspend-max-microvolt: maximum voltage may be set in
+	  suspend state.
+	- regulator-suspend-microvolt: the default voltage which regulator
+	  would be set in suspend. This property is now deprecated, instead
+	  setting voltage for suspend mode via the API which regulator
+	  driver provides is recommended.
+	- regulator-changeable-in-suspend: whether the default voltage and
+	  the regulator on/off in suspend can be changed in runtime.
 	- regulator-mode: operating mode in the given suspend state.
 	  The set of possible operating modes depends on the capabilities of
 	  every hardware so the valid modes are documented on each regulator

drivers/regulator/internal.h

@@ -16,10 +16,25 @@
 #ifndef __REGULATOR_INTERNAL_H
 #define __REGULATOR_INTERNAL_H
 
+#include <linux/suspend.h>
+
+#define REGULATOR_STATES_NUM	(PM_SUSPEND_MAX + 1)
+
+struct regulator_voltage {
+	int min_uV;
+	int max_uV;
+};
+
 /*
  * struct regulator
  *
  * One for each consumer device.
+ * @voltage - a voltage array for each state of runtime, i.e.:
+ *            PM_SUSPEND_ON
+ *            PM_SUSPEND_TO_IDLE
+ *            PM_SUSPEND_STANDBY
+ *            PM_SUSPEND_MEM
+ *            PM_SUSPEND_MAX
  */
 struct regulator {
 	struct device *dev;
@@ -27,14 +42,22 @@ struct regulator {
 	unsigned int always_on:1;
 	unsigned int bypass:1;
 	int uA_load;
-	int min_uV;
-	int max_uV;
+	struct regulator_voltage voltage[REGULATOR_STATES_NUM];
 	const char *supply_name;
 	struct device_attribute dev_attr;
 	struct regulator_dev *rdev;
 	struct dentry *debugfs;
 };
 
+extern struct class regulator_class;
+
+static inline struct regulator_dev *dev_to_rdev(struct device *dev)
+{
+	return container_of(dev, struct regulator_dev, dev);
+}
+
+struct regulator_dev *of_find_regulator_by_node(struct device_node *np);
+
 #ifdef CONFIG_OF
 struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 			         const struct regulator_desc *desc,

drivers/regulator/of_regulator.c

@@ -177,14 +177,30 @@ static void of_get_regulation_constraints(struct device_node *np,
 
 		if (of_property_read_bool(suspend_np,
 					"regulator-on-in-suspend"))
-			suspend_state->enabled = true;
+			suspend_state->enabled = ENABLE_IN_SUSPEND;
 		else if (of_property_read_bool(suspend_np,
 					"regulator-off-in-suspend"))
-			suspend_state->disabled = true;
+			suspend_state->enabled = DISABLE_IN_SUSPEND;
+		else
+			suspend_state->enabled = DO_NOTHING_IN_SUSPEND;
+
+		if (!of_property_read_u32(np, "regulator-suspend-min-microvolt",
+					  &pval))
+			suspend_state->min_uV = pval;
+
+		if (!of_property_read_u32(np, "regulator-suspend-max-microvolt",
+					  &pval))
+			suspend_state->max_uV = pval;
 
 		if (!of_property_read_u32(suspend_np,
 					"regulator-suspend-microvolt", &pval))
 			suspend_state->uV = pval;
+		else /* otherwise use min_uV as default suspend voltage */
+			suspend_state->uV = suspend_state->min_uV;
+
+		if (of_property_read_bool(suspend_np,
+					"regulator-changeable-in-suspend"))
+			suspend_state->changeable = true;
 
 		if (i == PM_SUSPEND_MEM)
 			constraints->initial_state = PM_SUSPEND_MEM;
@@ -376,3 +392,17 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 
 	return init_data;
 }
+
+static int of_node_match(struct device *dev, const void *data)
+{
+	return dev->of_node == data;
+}
+
+struct regulator_dev *of_find_regulator_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device(&regulator_class, NULL, np, of_node_match);
+
+	return dev ? dev_to_rdev(dev) : NULL;
+}

include/linux/regulator/driver.h

@@ -214,6 +214,8 @@ struct regulator_ops {
 	/* set regulator suspend operating mode (defined in consumer.h) */
 	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
 
+	int (*resume_early)(struct regulator_dev *rdev);
+
 	int (*set_pull_down) (struct regulator_dev *);
 };
 

include/linux/regulator/machine.h

@@ -42,6 +42,16 @@ struct regulator;
 #define REGULATOR_CHANGE_DRMS		0x10
 #define REGULATOR_CHANGE_BYPASS		0x20
 
+/*
+ * operations in suspend mode
+ * DO_NOTHING_IN_SUSPEND - the default value
+ * DISABLE_IN_SUSPEND	- turn off regulator in suspend states
+ * ENABLE_IN_SUSPEND	- keep regulator on in suspend states
+ */
+#define DO_NOTHING_IN_SUSPEND	(-1)
+#define DISABLE_IN_SUSPEND	0
+#define ENABLE_IN_SUSPEND	1
+
 /* Regulator active discharge flags */
 enum regulator_active_discharge {
 	REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
@@ -56,16 +66,24 @@ enum regulator_active_discharge {
  * state.  One of enabled or disabled must be set for the
  * configuration to be applied.
  *
- * @uV: Operating voltage during suspend.
+ * @uV: Default operating voltage during suspend, it can be adjusted
+ *	among <min_uV, max_uV>.
+ * @min_uV: Minimum suspend voltage may be set.
+ * @max_uV: Maximum suspend voltage may be set.
  * @mode: Operating mode during suspend.
- * @enabled: Enabled during suspend.
- * @disabled: Disabled during suspend.
+ * @enabled: operations during suspend.
+ *	     - DO_NOTHING_IN_SUSPEND
+ *	     - DISABLE_IN_SUSPEND
+ *	     - ENABLE_IN_SUSPEND
+ * @changeable: Is this state can be switched between enabled/disabled,
  */
 struct regulator_state {
-	int uV;	/* suspend voltage */
-	unsigned int mode; /* suspend regulator operating mode */
-	int enabled; /* is regulator enabled in this suspend state */
-	int disabled; /* is the regulator disabled in this suspend state */
+	int uV;
+	int min_uV;
+	int max_uV;
+	unsigned int mode;
+	int enabled;
+	bool changeable;
 };
 
 /**
@@ -225,12 +243,12 @@ struct regulator_init_data {
 
 #ifdef CONFIG_REGULATOR
 void regulator_has_full_constraints(void);
-int regulator_suspend_prepare(suspend_state_t state);
-int regulator_suspend_finish(void);
 #else
 static inline void regulator_has_full_constraints(void)
 {
 }
+#endif
+
 static inline int regulator_suspend_prepare(suspend_state_t state)
 {
 	return 0;
@@ -239,6 +257,5 @@ static inline int regulator_suspend_finish(void)
 {
 	return 0;
 }
-#endif
 
 #endif