Merge branch 'perf/urgent' into perf/core

Conflicts: tools/perf/builtin-record.c tools/perf/builtin-top.c tools/perf/perf.h tools/perf/util/top.h Merge reason: resolve these cherry-picking conflicts. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2026-05-01 15:00:59 -07:00 · 2012-03-05 09:20:08 +01:00
parent 8eedce9965 b7c924274c
commit 737f24bda7
920 changed files with 7209 additions and 46124 deletions
@@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in
 class/input/event*/device/capabilities/, and the properties of a device are
 provided in class/input/event*/device/properties.

-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.

 * EV_SYN:
  - Used as markers to separate events. Events may be separated in time or in
@@ -63,9 +63,9 @@ for details on valid codes for each type.
 * EV_FF_STATUS:
  - Used to receive force feedback device status.

-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.

 EV_SYN:
 ----------
@@ -220,6 +220,56 @@ EV_PWR:
 EV_PWR events are a special type of event used specifically for power
 mangement. Its usage is not well defined. To be addressed later.

+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements.  Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.
@@ -240,6 +290,8 @@ used to report when a touch is active on the screen.
 BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
 contact. BTN_TOOL_<name> events should be reported where possible.

+For new hardware, INPUT_PROP_DIRECT should be set.
+
 Trackpads:
 ----------
 Legacy trackpads that only provide relative position information must report
@@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active
 on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
 be used to report the number of touches active on the trackpad.

+For new hardware, INPUT_PROP_POINTER should be set.
+
 Tablets:
 ----------
 BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
@@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
 BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
 meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
 purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
@@ -601,6 +601,8 @@ can be ORed together:
        instead of using the one provided by the hardware.
 512 - A kernel warning has occurred.
 1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.

 ==============================================================

@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c

 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -789,12 +788,6 @@ F:	arch/arm/mach-mx*/
 F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/

-ARM/FREESCALE IMX51
-M:	Amit Kucheria <amit.kucheria@canonical.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-mx5/
-
 ARM/FREESCALE IMX6
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2287,7 +2280,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://xenotime.net/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/

@@ -3053,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h

 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -3324,6 +3316,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/

+IIO SUBSYSTEM AND DRIVERS
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/iio/
+
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
 M:	Stanislaw Gruszka <stf_xl@wp.pl>
@@ -3782,7 +3780,7 @@ F:	Documentation/kdump/

 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
-L:	autofs@linux.kernel.org
+L:	autofs@vger.kernel.org
 S:	Maintained
 F:	fs/autofs4/

@@ -3992,11 +3990,11 @@ M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@lists.ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Odd Fixes
-F:	Documentation/virtual/lguest/
+F:	arch/x86/include/asm/lguest*.h
 F:	arch/x86/lguest/
 F:	drivers/lguest/
 F:	include/linux/lguest*.h
-F:	arch/x86/include/asm/lguest*.h
+F:	tools/lguest/

 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@@ -4136,7 +4134,7 @@ L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
 F:	Documentation/ldm.txt
-F:	fs/partitions/ldm.*
+F:	block/partitions/ldm.*

 LogFS
 M:	Joern Engel <joern@logfs.org>
@@ -4687,7 +4685,7 @@ NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.tuxera.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
 S:	Supported
 F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
@@ -5000,9 +4998,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/

 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5633,7 +5630,7 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 F:	arch/s390/
 F:	drivers/s390/
-F:	fs/partitions/ibm.c
+F:	block/partitions/ibm.c
 F:	Documentation/s390/
 F:	Documentation/DocBook/s390*

@@ -5861,7 +5858,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c

 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5874,7 +5871,7 @@ S:	Supported

 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
@@ -6396,11 +6393,6 @@ M:	Omar Ramirez Luna <omar.ramirez@ti.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/

-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L:	linux-media@vger.kernel.org
-S:	Odd Fixes
-F:	drivers/staging/tm6000/
-
 STAGING - USB ENE SM/MS CARD READER DRIVER
 M:	Al Cho <acho@novell.com>
 S:	Odd Fixes
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel

 # *DOCUMENTATION*
@@ -29,6 +29,7 @@
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		cpu-offset = <0x8000>;
 		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};

@@ -46,11 +46,11 @@
 	};

 	serial@70006200 {
-		status = "disable"
+		clock-frequency = <216000000>;
 	};

 	serial@70006300 {
-		clock-frequency = <216000000>;
+		status = "disable"
 	};

 	serial@70006400 {
@@ -60,7 +60,7 @@
 	sdhci@c8000000 {
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};

 	sdhci@c8000200 {
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }

-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
   termination by PCI bus master devices
 */
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;

 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;

 	pl330 = thrd->dmac;
+	active = thrd->req_running;

 	spin_lock_irqsave(&pl330->lock, flags);

@@ -137,6 +137,11 @@
 	disable_irq
 	.endm

+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
 * Restore interrupt state previously stored in a register.  We don't
 * guarantee that this will preserve the flags.
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>

 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
@@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	unsigned long addr)
 {
 	pgtable_page_dtor(pte);
-	tlb_add_flush(tlb, addr);
+
+	/*
+	 * With the classic ARM MMU, a pte page has two corresponding pmd
+	 * entries, each covering 1MB.
+	 */
+	addr &= PMD_MASK;
+	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+	tlb_add_flush(tlb, addr + SZ_1M);
+
 	tlb_remove_page(tlb, pte);
 }

@@ -790,7 +790,7 @@ __kuser_cmpxchg64:				@ 0xffff0f60
 	smp_dmb	arm
 	rsbs	r0, r3, #0			@ set returned val and C flag
 	ldmfd	sp!, {r4, r5, r6, r7}
-	bx	lr
+	usr_ret	lr

 #elif !defined(CONFIG_SMP)

@@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };

 /*
@@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };

 /*
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>

 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target,
 {
 	int ret;
 	struct thread_info *thread = task_thread_info(target);
-	struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+	struct vfp_hard_struct new_vfp;
 	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
 	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);

+	vfp_sync_hwstate(thread);
+	new_vfp = thread->vfpstate.hard;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &new_vfp.fpregs,
 				  user_fpregs_offset,
@@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;

-	vfp_sync_hwstate(thread);
-	thread->vfpstate.hard = new_vfp;
 	vfp_flush_hwstate(thread);
+	thread->vfpstate.hard = new_vfp;

 	return 0;
 }
@@ -902,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }

+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -916,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);

 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;

+	vfp_flush_hwstate(thread);
+
 	/*
 	 * Copy the floating point registers. There can be unused
 	 * registers see asm/hwcap.h for details.
@@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
 	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);

-	if (!err)
-		vfp_flush_hwstate(thread);
-
 	return err ? -EFAULT : 0;
 }

@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {

 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);

@@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err)
 {
 	struct thread_info *thread = current_thread_info();
 	int ret;
+	enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;

 	oops_enter();

@@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err)
 	console_verbose();
 	bust_spinlocks(1);
 	if (!user_mode(regs))
-		report_bug(regs->ARM_pc, regs);
+		bug_type = report_bug(regs->ARM_pc, regs);
+	if (bug_type != BUG_TRAP_TYPE_NONE)
+		str = "Oops - BUG";
 	ret = __die(str, err, thread, regs);

 	if (regs && kexec_should_crash(thread->task))
@@ -10,6 +10,7 @@
 #include <asm/page.h>
 	
 #define PROC_INFO							\
+	. = ALIGN(4);							\
 	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 *  USB Device (Gadget)
 * -------------------------------------------------------------------- */

-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;

 static struct resource udc_resources[] = {
--- a/Show More
+++ b/Show More