sh: migor board support

This patch adds basic support for the Migo-R board.

Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -473,6 +473,13 @@ config SH_HIGHLANDER
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
 
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705

arch/sh/Makefile

@@ -116,6 +116,7 @@ machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
+machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
 machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
 machdir-$(CONFIG_SH_7710VOIPGW)			+= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto

arch/sh/boards/renesas/migor/Makefile

@@ -0,0 +1 @@
+obj-y	 := setup.o

arch/sh/boards/renesas/migor/setup.c

@@ -0,0 +1,61 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = P2SEGADDR(0x10000300),
+		.end    = P2SEGADDR(0x1000030f),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 32, /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+};
+
+static int __init migor_devices_setup(void)
+{
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+	ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_setup		= migor_setup,
+};