Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann: "These bug fixes are for the largest part for mvebu/kirkwood, which saw a few regressions after the clock infrastructure was enabled, and for OMAP, which showed a few more preexisting bugs with the new multiplatform support. Other small fixes are for imx, mxs, tegra, spear and socfpga" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: spear3xx: Use correct pl080 header file Arm: socfpga: pl330: Add #dma-cells for generic dma binding support ARM: multiplatform: Sort the max gpio numbers. ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" ARM: imx: pll1_sys should be an initial on clk arm: mach-orion5x: fix typo in compatible string of a .dts file arm: mvebu: fix address-cells in mpic DT node arm: plat-orion: fix address decoding when > 4GB is used arm: mvebu: Reduce reg-io-width with UARTs ARM: Dove: add RTC device node arm: mvebu: enable the USB ports on Armada 370 Reference Design board ARM: dove: drop "select COMMON_CLK_DOVE" rtc: rtc-mv: Add support for clk to avoid lockups gpio: mvebu: Add clk support to prevent lockup ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency ARM: mxs: cfa10049: Fix fb initialisation function ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: OMAP: RX-51: add missing USB phy binding clk: Tegra: Remove duplicate smp_twd clock ...
2026-05-01 15:00:59 -07:00 · 2013-03-12 10:21:38 -07:00
parent 4388817f70 27f423fe12
commit 6d9431a749
57 changed files with 131 additions and 97 deletions
@@ -556,7 +556,6 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -1657,13 +1656,16 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.

+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 355 if ARCH_U8500
-	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 355 if ARCH_U8500
 	default 288 if ARCH_VT8500 || ARCH_SUNXI
+	default 264 if MACH_H4700
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX31_UART || \
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
-						DEBUG_IMX50_IMX53_UART || \
+						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART
 	default 1
 	help
@@ -115,4 +115,4 @@ i:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"

-subdir-	    := bootp compressed
+subdir-	    := bootp compressed dts
@@ -64,5 +64,13 @@
 			status = "okay";
 			/* No CD or WP GPIOs */
 		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
 	};
 };
@@ -31,7 +31,6 @@
 	mpic: interrupt-controller@d0020000 {
 	      compatible = "marvell,mpic";
 	      #interrupt-cells = <1>;
-	      #address-cells = <1>;
 	      #size-cells = <1>;
 	      interrupt-controller;
 	};
@@ -54,7 +53,7 @@
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012100 {
@@ -62,7 +61,7 @@
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};

@@ -46,7 +46,7 @@
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012300 {
@@ -54,7 +54,7 @@
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};

@@ -105,7 +105,7 @@
 			compatible = "fixed-clock";
 			reg = <1>;
 			#clock-cells = <0>;
-			clock-frequency = <150000000>;
+			clock-frequency = <250000000>;
 		};
 	};
 };
@@ -197,6 +197,11 @@
 			status = "disabled";
 		};

+		rtc@d8500 {
+			compatible = "marvell,orion-rtc";
+			reg = <0xd8500 0x20>;
+		};
+
 		crypto: crypto@30000 {
 			compatible = "marvell,orion-crypto";
 			reg = <0x30000 0x10000>,
@@ -42,10 +42,9 @@
 			fsl,pins = <689 0x10000		/* DISP1_DRDY	*/
 				    482 0x10000		/* DISP1_HSYNC	*/
 				    489 0x10000		/* DISP1_VSYNC	*/
-				    684 0x10000		/* DISP1_DAT_0	*/
 				    515 0x10000		/* DISP1_DAT_22	*/
 				    523 0x10000		/* DISP1_DAT_23	*/
-				    543 0x10000		/* DISP1_DAT_21	*/
+				    545 0x10000		/* DISP1_DAT_21	*/
 				    553 0x10000		/* DISP1_DAT_20	*/
 				    558 0x10000		/* DISP1_DAT_19	*/
 				    564 0x10000		/* DISP1_DAT_18	*/
@@ -42,12 +42,10 @@

 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};

 		serial@12100 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};
@@ -50,7 +50,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};
@@ -37,7 +37,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -38,7 +38,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -73,7 +73,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -51,7 +51,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};

@@ -78,7 +78,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -115,7 +115,6 @@
 		};

 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -34,7 +34,6 @@
 		};

 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok"
 		};

@@ -13,7 +13,6 @@

 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};
@@ -13,7 +13,6 @@

 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};
--- a/Show More
+++ b/Show More