Staging: fixed multiple spelling errors.

Fixed multiple spelling errors.

Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/android/ion/ion_priv.h

@@ -33,7 +33,7 @@ struct ion_buffer *ion_handle_buffer(struct ion_handle *handle);
 
 /**
  * struct ion_buffer - metadata for a particular buffer
- * @ref:		refernce count
+ * @ref:		reference count
  * @node:		node in the ion_device buffers tree
  * @dev:		back pointer to the ion_device
  * @heap:		back pointer to the heap the buffer came from
@@ -46,7 +46,7 @@ struct ion_buffer *ion_handle_buffer(struct ion_handle *handle);
  *			an ion_phys_addr_t (and someday a phys_addr_t)
  * @lock:		protects the buffers cnt fields
  * @kmap_cnt:		number of times the buffer is mapped to the kernel
- * @vaddr:		the kenrel mapping if kmap_cnt is not zero
+ * @vaddr:		the kernel mapping if kmap_cnt is not zero
  * @dmap_cnt:		number of times the buffer is mapped for dma
  * @sg_table:		the sg table for the buffer if dmap_cnt is not zero
  * @pages:		flat array of pages in the buffer -- used by fault
@@ -266,7 +266,7 @@ void ion_heap_freelist_add(struct ion_heap *heap, struct ion_buffer *buffer);
 /**
  * ion_heap_freelist_drain - drain the deferred free list
  * @heap:		the heap
- * @size:		ammount of memory to drain in bytes
+ * @size:		amount of memory to drain in bytes
  *
  * Drains the indicated amount of memory from the deferred freelist immediately.
  * Returns the total amount freed.  The total freed may be higher depending

drivers/staging/android/uapi/ion.h

@@ -179,7 +179,7 @@ struct ion_custom_data {
  * DOC: ION_IOC_SYNC - syncs a shared file descriptors to memory
  *
  * Deprecated in favor of using the dma_buf api's correctly (syncing
- * will happend automatically when the buffer is mapped to a device).
+ * will happen automatically when the buffer is mapped to a device).
  * If necessary should be used after touching a cached buffer from the cpu,
  * this will make the buffer in memory coherent.
  */

drivers/staging/comedi/comedi_fops.c

@@ -1762,7 +1762,7 @@ cleanup:
 
 /*
  * COMEDI_CMDTEST ioctl
- * asynchronous aquisition command testing
+ * asynchronous acquisition command testing
  *
  * arg:
  *	pointer to comedi_cmd structure

drivers/staging/dgnc/TODO

@@ -1,9 +1,9 @@
 * checkpatch fixes
-* remove unecessary comments
-* remove unecessary error messages. Example kzalloc() has its
+* remove unnecessary comments
+* remove unnecessary error messages. Example kzalloc() has its
   own error message. Adding an extra one is useless.
 * use goto statements for error handling when appropriate
-* there is a lot of unecessary code in the driver. It was
+* there is a lot of unnecessary code in the driver. It was
   originally a standalone driver. Remove uneeded code.
 
 Please send patches to Greg Kroah-Hartman <greg@kroah.com> and

drivers/staging/dgnc/dgnc_neo.c

@@ -1203,7 +1203,7 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch)
 		memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
 
 		/*
-		 * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+		 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
 		 * that all the data currently in the FIFO is free of
 		 * breaks and parity/frame/orun errors.
 		 */

drivers/staging/emxx_udc/emxx_udc.c

@@ -1223,7 +1223,7 @@ static int _nbu2ss_epn_in_transfer(
 	}
 
 	/*-------------------------------------------------------------*/
-	/* Start tranfer */
+	/* Start transfer */
 	iBufSize = req->req.length - req->req.actual;
 	if (iBufSize > 0)
 		result = _nbu2ss_epn_in_data(udc, ep, req, iBufSize);

drivers/staging/fbtft/Kconfig

@@ -12,7 +12,7 @@ config FB_TFT_AGM1264K_FL
 	tristate "FB driver for the AGM1264K-FL LCD display"
 	depends on FB_TFT
 	help
-	  Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatable chips)
+	  Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips)
 
 config FB_TFT_BD663474
 	tristate "FB driver for the BD663474 LCD Controller"

drivers/staging/fwserial/dma_fifo.c

@@ -56,7 +56,7 @@ void dma_fifo_init(struct dma_fifo *fifo)
  * @size: 'apparent' size, in bytes, of fifo
  * @align: dma alignment to maintain (should be at least cpu cache alignment),
  *         must be power of 2
- * @tx_limit: maximum # of bytes transmissable per dma (rounded down to
+ * @tx_limit: maximum # of bytes transmissible per dma (rounded down to
  *            multiple of alignment, but at least align size)
  * @open_limit: maximum # of outstanding dma transactions allowed
  * @gfp_mask: get_free_pages mask, passed to kmalloc()

drivers/staging/fwserial/fwserial.h

@@ -218,7 +218,7 @@ struct fwconsole_ops {
  *         prevented with the IN_TX flag. Scheduled under lock to
  *         limit scheduling when fifo has just been drained.
  * @tx_fifo: fifo used to store & block-up writes for dma to remote
- * @max_payload: max bytes transmissable per dma (based on peer's max_payload)
+ * @max_payload: max bytes transmissible per dma (based on peer's max_payload)
  * @status_mask: UART_LSR_* bitmask significant to rx (based on termios)
  * @ignore_mask: UART_LSR_* bitmask of states to ignore (also based on termios)
  * @break_ctl: if set, port is 'sending break' to remote

drivers/staging/iio/Documentation/device.txt

@@ -52,7 +52,7 @@ Then fill in the following:
 	* info->write_event_value:
 		Write the value associated with on sensor event detectors. E.g.
 		a threshold above which an interrupt occurs.  Note that the
-		meaning of the value to be set is event type dependant.
+		meaning of the value to be set is event type dependent.
 
 - indio_dev->modes:
 	Specify whether direct access and / or ring buffer access is supported.

drivers/staging/iio/iio_simple_dummy.h

@@ -25,7 +25,7 @@ struct iio_dummy_regs;
  * @accel_calibscale:		cache for acceleration calibscale
  * @lock:			lock to ensure state is consistent
  * @event_irq:			irq number for event line (faked)
- * @event_val:			cache for event theshold value
+ * @event_val:			cache for event threshold value
  * @event_en:			cache of whether event is enabled
  */
 struct iio_dummy_state {

drivers/staging/lustre/TODO

@@ -1,6 +1,6 @@
 * Possible remaining coding style fix.
 * Remove deadcode.
-* Seperate client/server functionality. Functions only used by server can be
+* Separate client/server functionality. Functions only used by server can be
   removed from client.
 * Clean up libcfs layer. Ideally we can remove include/linux/libcfs entirely.
 * Clean up CLIO layer. Lustre client readahead/writeback control needs to better

drivers/staging/media/bcm2048/radio-bcm2048.c

@@ -217,7 +217,7 @@
 #define BCM2048_FREQ_ERROR_FLOOR	-20
 #define BCM2048_FREQ_ERROR_ROOF		20
 
-/* -60 dB is reported as full signal strenght */
+/* -60 dB is reported as full signal strength */
 #define BCM2048_RSSI_LEVEL_BASE		-60
 #define BCM2048_RSSI_LEVEL_ROOF		-100
 #define BCM2048_RSSI_LEVEL_ROOF_NEG	100
@@ -2468,7 +2468,7 @@ static int bcm2048_vidioc_g_tuner(struct file *file, void *priv,
 		} else {
 			/*
 			 * RSSI level -60 dB is defined to report full
-			 * signal strenght
+			 * signal strength
 			 */
 			rssi = bcm2048_get_fm_rssi(bdev);
 			if (rssi >= BCM2048_RSSI_LEVEL_BASE) {

drivers/staging/octeon-usb/octeon-hcd.c

@@ -1239,7 +1239,7 @@ static int cvmx_usb_fill_tx_hw(struct cvmx_usb_state *usb,
 							usb->index) ^ 4;
 		int words = available;
 
-		/* Limit the amount of data to waht the SW fifo has */
+		/* Limit the amount of data to what the SW fifo has */
 		if (fifo->entry[i].size <= available) {
 			words = fifo->entry[i].size;
 			fifo->tail++;
@@ -1849,7 +1849,7 @@ static void cvmx_usb_start_channel(struct cvmx_usb_state *usb, int channel,
 		transaction->xfersize = usbc_hctsiz.s.xfersize;
 		transaction->pktcnt = usbc_hctsiz.s.pktcnt;
 	}
-	/* Remeber when we start a split transaction */
+	/* Remember when we start a split transaction */
 	if (cvmx_usb_pipe_needs_split(usb, pipe))
 		usb->active_split = transaction;
 	USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index),

drivers/staging/octeon-usb/octeon-hcd.h

@@ -1693,7 +1693,7 @@ union cvmx_usbnx_usbp_ctl_status {
 	 * struct cvmx_usbnx_usbp_ctl_status_s
 	 * @txrisetune: HS Transmitter Rise/Fall Time Adjustment
 	 * @txvreftune: HS DC Voltage Level Adjustment
-	 * @txfslstune: FS/LS Source Impedence Adjustment
+	 * @txfslstune: FS/LS Source Impedance Adjustment
 	 * @txhsxvtune: Transmitter High-Speed Crossover Adjustment
 	 * @sqrxtune: Squelch Threshold Adjustment
 	 * @compdistune: Disconnect Threshold Adjustment

drivers/staging/rtl8188eu/include/rtl8188e_hal.h

@@ -159,7 +159,7 @@ struct txpowerinfo24g {
 /*  | 1byte|----8bytes----|1byte|--5bytes--| */
 /*  |         |            Reserved(14bytes)	      | */
 
-/*  PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
+/*  PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */
 #define EFUSE_OOB_PROTECT_BYTES			15
 
 #define		HWSET_MAX_SIZE_88E		512
@@ -177,7 +177,7 @@ struct txpowerinfo24g {
 /*  9bytes + 1byt + 5bytes and pre 1byte. */
 /*  For worst case: */
 /*  | 2byte|----8bytes----|1byte|--7bytes--| 92D */
-/*  PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. */
+/*  PG data exclude header, dummy 7 bytes from CP test and reserved 1byte. */
 #define		EFUSE_OOB_PROTECT_BYTES_88E	18
 #define		EFUSE_PROTECT_BYTES_BANK_88E	16
 

drivers/staging/rtl8192u/r8192U_dm.c

@@ -120,7 +120,7 @@ static	void	dm_ctstoself(struct net_device *dev);
  *		Prepare SW resource for HW dynamic mechanism.
  *
  *	Assumption:
- *		This function is only invoked at driver intialization once.
+ *		This function is only invoked at driver initialization once.
  */
 void init_hal_dm(struct net_device *dev)
 {

drivers/staging/rtl8712/rtl8712_xmit.c

@@ -340,7 +340,7 @@ u8 r8712_append_mpdu_unit(struct xmit_buf *pxmitbuf,
 u8 r8712_xmitframe_aggr_1st(struct xmit_buf *pxmitbuf,
 			struct xmit_frame *pxmitframe)
 {
-	/* linux complete context doesnt need to protect */
+	/* linux complete context doesn't need to protect */
 	pxmitframe->pxmitbuf = pxmitbuf;
 	pxmitbuf->priv_data = pxmitframe;
 	pxmitframe->pxmit_urb[0] = pxmitbuf->pxmit_urb[0];

drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h

@@ -603,7 +603,7 @@
 #define	bCCKRxIG		0x7f00
 #define	bCCKLNAPolarity		0x800000
 #define	bCCKRx1stGain		0x7f0000
-#define	bCCKRFExtend		0x20000000 /* CCK Rx inital gain polarity */
+#define	bCCKRFExtend		0x20000000 /* CCK Rx initial gain polarity */
 #define	bCCKRxAGCSatLevel	0x1f000000
 #define	bCCKRxAGCSatCount       0xe0
 #define	bCCKRxRFSettle          0x1f       /* AGCsamp_dly */

drivers/staging/rtl8723au/hal/HalPwrSeqCmd.c

@@ -92,7 +92,7 @@ u8 HalPwrSeqCmdParsing23a(struct rtw_adapter *padapter, u8 CutVersion,
 				value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) &
 					  GET_PWR_CFG_MASK(PwrCfgCmd));
 
-				/*  Write the value back to sytem register */
+				/*  Write the value back to system register */
 				rtl8723au_write8(padapter, offset, value);
 				break;