kconfig: use bool instead of boolean for type definition attributes

Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

arch/mips/pmcs-msp71xx/Kconfig

@@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA
 endchoice
 
 config MSP_HAS_USB
-	boolean
+	bool
 	depends on PMC_MSP
 
 config MSP_ETH
-	boolean
+	bool
 	select MSP_HAS_MAC
 	depends on PMC_MSP
 
 config MSP_HAS_MAC
-	boolean
+	bool
 	depends on PMC_MSP

drivers/connector/Kconfig

@@ -12,7 +12,7 @@ menuconfig CONNECTOR
 if CONNECTOR
 
 config PROC_EVENTS
-	boolean "Report process events to userspace"
+	bool "Report process events to userspace"
 	depends on CONNECTOR=y
 	default y
 	---help---

drivers/hwmon/Kconfig

@@ -1595,7 +1595,7 @@ config SENSORS_W83795
 	  will be called w83795.
 
 config SENSORS_W83795_FANCTRL
-	boolean "Include automatic fan control support (DANGEROUS)"
+	bool "Include automatic fan control support (DANGEROUS)"
 	depends on SENSORS_W83795
 	default n
 	help

drivers/hwmon/pmbus/Kconfig

@@ -57,7 +57,7 @@ config SENSORS_LTC2978
 	  be called ltc2978.
 
 config SENSORS_LTC2978_REGULATOR
-	boolean "Regulator support for LTC2978 and compatibles"
+	bool "Regulator support for LTC2978 and compatibles"
 	depends on SENSORS_LTC2978 && REGULATOR
 	help
 	  If you say yes here you get regulator support for Linear

drivers/i2c/Kconfig

@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
 if I2C
 
 config I2C_BOARDINFO
-	boolean
+	bool
 	default y
 
 config I2C_COMPAT
-	boolean "Enable compatibility bits for old user-space"
+	bool "Enable compatibility bits for old user-space"
 	default y
 	help
 	  Say Y here if you intend to run lm-sensors 3.1.1 or older, or any

drivers/iio/Kconfig

@@ -21,7 +21,7 @@ config IIO_BUFFER
 if IIO_BUFFER
 
 config IIO_BUFFER_CB
-boolean "IIO callback buffer used for push in-kernel interfaces"
+	bool "IIO callback buffer used for push in-kernel interfaces"
 	help
 	  Should be selected by any drivers that do in-kernel push
 	  usage.  That is, those where the data is pushed to the consumer.
@@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER
 endif # IIO_BUFFER
 
 config IIO_TRIGGER
-	boolean "Enable triggered sampling support"
+	bool "Enable triggered sampling support"
 	help
 	  Provides IIO core support for triggers.  Currently these
 	  are used to initialize capture of samples to push into

drivers/isdn/hardware/mISDN/Kconfig

@@ -24,7 +24,7 @@ config MISDN_HFCMULTI
 	   * HFC-E1 (E1 interface for 2Mbit ISDN)
 
 config MISDN_HFCMULTI_8xx
-	boolean "Support for XHFC embedded board in HFC multiport driver"
+	bool "Support for XHFC embedded board in HFC multiport driver"
 	depends on MISDN
 	depends on MISDN_HFCMULTI
 	depends on 8xx

drivers/md/Kconfig

@@ -177,7 +177,7 @@ config MD_FAULTY
 source "drivers/md/bcache/Kconfig"
 
 config BLK_DEV_DM_BUILTIN
-	boolean
+	bool
 
 config BLK_DEV_DM
 	tristate "Device mapper support"
@@ -196,7 +196,7 @@ config BLK_DEV_DM
 	  If unsure, say N.
 
 config DM_DEBUG
-	boolean "Device mapper debugging support"
+	bool "Device mapper debugging support"
 	depends on BLK_DEV_DM
 	---help---
 	  Enable this for messages that may help debug device-mapper problems.

drivers/md/persistent-data/Kconfig

@@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
 	 device-mapper targets such as the thin provisioning target.
 
 config DM_DEBUG_BLOCK_STACK_TRACING
-       boolean "Keep stack trace of persistent data block lock holders"
+       bool "Keep stack trace of persistent data block lock holders"
        depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
        select STACKTRACE
        ---help---

drivers/net/ethernet/ti/Kconfig

@@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
 	  will be called davinci_cpdma.  This is recommended.
 
 config TI_CPSW_PHY_SEL
-	boolean "TI CPSW Switch Phy sel Support"
+	bool "TI CPSW Switch Phy sel Support"
 	depends on TI_CPSW
 	---help---
 	  This driver supports configuring of the phy mode connected to
@@ -71,7 +71,7 @@ config TI_CPSW
 	  will be called cpsw.
 
 config TI_CPTS
-	boolean "TI Common Platform Time Sync (CPTS) Support"
+	bool "TI Common Platform Time Sync (CPTS) Support"
 	depends on TI_CPSW
 	select PTP_1588_CLOCK
 	---help---

drivers/net/usb/Kconfig

@@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
 	  not generally have permanently assigned Ethernet addresses.
 
 config USB_ALI_M5632
-	boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design, which supports USB 2.0 high speed.
 
 config USB_AN2720
-	boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
@@ -412,7 +412,7 @@ config USB_AN2720
 	  Cypress brand.
 
 config USB_BELKIN
-	boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -421,7 +421,7 @@ config USB_BELKIN
 	  microcontroller, with LEDs that indicate traffic.
 
 config USB_ARMLINUX
-	boolean "Embedded ARM Linux links (iPaq, ...)"
+	bool "Embedded ARM Linux links (iPaq, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -438,14 +438,14 @@ config USB_ARMLINUX
 	  this simpler protocol by installing a different kernel.
 
 config USB_EPSON2888
-	boolean "Epson 2888 based firmware (DEVELOPMENT)"
+	bool "Epson 2888 based firmware (DEVELOPMENT)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
 
 config USB_KC2190
-	boolean "KT Technology KC2190 based cables (InstaNet)"
+	bool "KT Technology KC2190 based cables (InstaNet)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable

drivers/net/wireless/rt2x00/Kconfig

@@ -243,14 +243,14 @@ config RT2X00_LIB
 	select AVERAGE
 
 config RT2X00_LIB_FIRMWARE
-	boolean
+	bool
 	select FW_LOADER
 
 config RT2X00_LIB_CRYPTO
-	boolean
+	bool
 
 config RT2X00_LIB_LEDS
-	boolean
+	bool
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
 
 config RT2X00_LIB_DEBUGFS

drivers/pci/pcie/aer/Kconfig

@@ -3,7 +3,7 @@
 #
 
 config PCIEAER
-	boolean "Root Port Advanced Error Reporting support"
+	bool "Root Port Advanced Error Reporting support"
 	depends on PCIEPORTBUS
 	select RAS
 	default y

drivers/rtc/Kconfig

@@ -65,7 +65,7 @@ config RTC_DEBUG
 comment "RTC interfaces"
 
 config RTC_INTF_SYSFS
-	boolean "/sys/class/rtc/rtcN (sysfs)"
+	bool "/sys/class/rtc/rtcN (sysfs)"
 	depends on SYSFS
 	default RTC_CLASS
 	help
@@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
 	  If unsure, say Y.
 
 config RTC_INTF_PROC
-	boolean "/proc/driver/rtc (procfs for rtcN)"
+	bool "/proc/driver/rtc (procfs for rtcN)"
 	depends on PROC_FS
 	default RTC_CLASS
 	help
@@ -88,7 +88,7 @@ config RTC_INTF_PROC
 	  If unsure, say Y.
 
 config RTC_INTF_DEV
-	boolean "/dev/rtcN (character devices)"
+	bool "/dev/rtcN (character devices)"
 	default RTC_CLASS
 	help
 	  Say yes here if you want to use your RTCs using the /dev
@@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM
 	  Supports the RTC firmware in the MSP430 on the DM355 EVM.
 
 config RTC_DRV_TWL92330
-	boolean "TI TWL92330/Menelaus"
+	bool "TI TWL92330/Menelaus"
 	depends on MENELAUS
 	help
 	  If you say yes here you get support for the RTC on the

drivers/spi/Kconfig

@@ -29,7 +29,7 @@ menuconfig SPI
 if SPI
 
 config SPI_DEBUG
-	boolean "Debug support for SPI drivers"
+	bool "Debug support for SPI drivers"
 	depends on DEBUG_KERNEL
 	help
 	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
@@ -40,8 +40,8 @@ config SPI_DEBUG
 #
 
 config SPI_MASTER
-#	boolean "SPI Master Support"
-	boolean
+#	bool "SPI Master Support"
+	bool
 	default SPI
 	help
 	  If your system has an master-capable SPI controller (which

drivers/staging/board/Kconfig

@@ -1,5 +1,5 @@
 config STAGING_BOARD
-	boolean "Staging Board Support"
+	bool "Staging Board Support"
 	depends on OF_ADDRESS
 	depends on BROKEN
 	help

drivers/staging/emxx_udc/Kconfig

@@ -1,5 +1,5 @@
 config USB_EMXX
-	boolean "EMXX USB Function Device Controller"
+	bool "EMXX USB Function Device Controller"
  	depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
 	help
 	   The Emma Mobile series of SoCs from Renesas Electronics and

drivers/staging/iio/Kconfig

@@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
 if IIO_SIMPLE_DUMMY
 
 config IIO_SIMPLE_DUMMY_EVENTS
-       boolean "Event generation support"
+       bool "Event generation support"
        select IIO_DUMMY_EVGEN
        help
          Add some dummy events to the simple dummy driver.
 
 config IIO_SIMPLE_DUMMY_BUFFER
-	boolean "Buffered capture support"
+	bool "Buffered capture support"
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	help

drivers/tty/serial/Kconfig

@@ -498,7 +498,7 @@ config SERIAL_MFD_HSU
 	select SERIAL_CORE
 
 config SERIAL_MFD_HSU_CONSOLE
-	boolean "Medfile HSU serial console support"
+	bool "Medfile HSU serial console support"
 	depends on SERIAL_MFD_HSU=y
 	select SERIAL_CORE_CONSOLE
 

drivers/usb/gadget/Kconfig

@@ -45,7 +45,7 @@ menuconfig USB_GADGET
 if USB_GADGET
 
 config USB_GADGET_DEBUG
-	boolean "Debugging messages (DEVELOPMENT)"
+	bool "Debugging messages (DEVELOPMENT)"
 	depends on DEBUG_KERNEL
 	help
 	   Many controller and gadget drivers will print some debugging
@@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
 	   production build.
 
 config USB_GADGET_DEBUG_FILES
-	boolean "Debugging information files (DEVELOPMENT)"
+	bool "Debugging information files (DEVELOPMENT)"
 	depends on PROC_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
@@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
 	   here.  If in doubt, or to conserve kernel memory, say "N".
 
 config USB_GADGET_DEBUG_FS
-	boolean "Debugging information files in debugfs (DEVELOPMENT)"
+	bool "Debugging information files in debugfs (DEVELOPMENT)"
 	depends on DEBUG_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
@@ -230,7 +230,7 @@ config USB_CONFIGFS
 	  For more information see Documentation/usb/gadget_configfs.txt.
 
 config USB_CONFIGFS_SERIAL
-	boolean "Generic serial bulk in/out"
+	bool "Generic serial bulk in/out"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
 	  The function talks to the Linux-USB generic serial driver.
 
 config USB_CONFIGFS_ACM
-	boolean "Abstract Control Model (CDC ACM)"
+	bool "Abstract Control Model (CDC ACM)"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
 	  MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
 
 config USB_CONFIGFS_OBEX
-	boolean "Object Exchange Model (CDC OBEX)"
+	bool "Object Exchange Model (CDC OBEX)"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
 	  since the kernel itself doesn't implement the OBEX protocol.
 
 config USB_CONFIGFS_NCM
-	boolean "Network Control Model (CDC NCM)"
+	bool "Network Control Model (CDC NCM)"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
 	  different alignment possibilities.
 
 config USB_CONFIGFS_ECM
-	boolean "Ethernet Control Model (CDC ECM)"
+	bool "Ethernet Control Model (CDC ECM)"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
 	  supported by firmware for smart network devices.
 
 config USB_CONFIGFS_ECM_SUBSET
-	boolean "Ethernet Control Model (CDC ECM) subset"
+	bool "Ethernet Control Model (CDC ECM) subset"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
 	  the host is the same (a usbX device), so the differences are minimal.
 
 config USB_CONFIGFS_PHONET
-	boolean "Phonet protocol"
+	bool "Phonet protocol"
 	depends on USB_CONFIGFS
 	depends on NET
 	depends on PHONET
@@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
 	  The Phonet protocol implementation for USB device.
 
 config USB_CONFIGFS_MASS_STORAGE
-	boolean "Mass storage"
+	bool "Mass storage"
 	depends on USB_CONFIGFS
 	depends on BLOCK
 	select USB_F_MASS_STORAGE
@@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
 	  specified as a module parameter or sysfs option.
 
 config USB_CONFIGFS_F_LB_SS
-	boolean "Loopback and sourcesink function (for testing)"
+	bool "Loopback and sourcesink function (for testing)"
 	depends on USB_CONFIGFS
 	select USB_F_SS_LB
 	help
@@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
 	  and its driver through a basic set of functional tests.
 
 config USB_CONFIGFS_F_FS
-	boolean "Function filesystem (FunctionFS)"
+	bool "Function filesystem (FunctionFS)"
 	depends on USB_CONFIGFS
 	select USB_F_FS
 	help
@@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
 	  mass storage) and other are implemented in user space.
 
 config USB_CONFIGFS_F_UAC1
-	boolean "Audio Class 1.0"
+	bool "Audio Class 1.0"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
 	  on the device.
 
 config USB_CONFIGFS_F_UAC2
-	boolean "Audio Class 2.0"
+	bool "Audio Class 2.0"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
 	  wants as audio data to the USB Host.
 
 config USB_CONFIGFS_F_MIDI
-	boolean "MIDI function"
+	bool "MIDI function"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
 	  ALSA's aconnect utility etc.
 
 config USB_CONFIGFS_F_HID
-	boolean "HID function"
+	bool "HID function"
 	depends on USB_CONFIGFS
 	select USB_F_HID
 	help