Merge tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big pull request for the staging driver tree for 3.17-rc1.

  Lots of things in here, over 2000 patches, but the best part is this:
   1480 files changed, 39070 insertions(+), 254659 deletions(-)

  Thanks to the great work of Kristina Martšenko, 14 different staging
  drivers have been removed from the tree as they were obsolete and no
  one was willing to work on cleaning them up.  Other than the driver
  removals, loads of cleanups are in here (comedi, lustre, etc.) as well
  as the usual IIO driver updates and additions.

  All of this has been in the linux-next tree for a while"

* tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits)
  staging: comedi: addi_apci_1564: remove diagnostic interrupt support code
  staging: comedi: addi_apci_1564: add subdevice to check diagnostic status
  staging: wlan-ng: coding style problem fix
  staging: wlan-ng: fixing coding style problems
  staging: comedi: ii_pci20kc: request and ioremap memory
  staging: lustre: bitwise vs logical typo
  staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h
  staging: dgnc: rephrase comment
  staging: comedi: ni_tio: remove some dead code
  staging: rtl8723au: Fix static symbol sparse warning
  staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc'
  staging: rtl8723au: Do not duplicate kernel provided USB macros
  staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown
  staging: rtl8723au: Remove two never set variables
  staging: rtl8723au: RSSI_test is never set
  staging:r8190: coding style: Fixed checkpatch reported Error
  staging:r8180: coding style: Fixed too long lines
  staging:r8180: coding style: Fixed commenting style
  staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer
  staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer
  ...

Documentation/ABI/testing/sysfs-bus-iio

@@ -260,6 +260,10 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
 KernelVersion:	2.6.35
@@ -447,6 +451,14 @@ What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
@@ -492,6 +504,14 @@ What:		/sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
@@ -538,6 +558,14 @@ What:		/sys/.../events/in_magn_y_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_y_raw_thresh_falling_value
 What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
@@ -588,6 +616,18 @@ What:		/sys/.../events/in_magn_y_thresh_either_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_rising_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_falling_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_rising_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_falling_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_either_hysteresis
@@ -635,6 +675,14 @@ What:		/sys/.../events/in_magn_y_raw_roc_rising_value
 What:		/sys/.../events/in_magn_y_raw_roc_falling_value
 What:		/sys/.../events/in_magn_z_raw_roc_rising_value
 What:		/sys/.../events/in_magn_z_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_raw_roc_rising_value
@@ -690,6 +738,22 @@ What:		/sys/.../events/in_magn_z_thresh_rising_period
 What:		/sys/.../events/in_magn_z_thresh_falling_period
 What:		/sys/.../events/in_magn_z_roc_rising_period
 What:		/sys/.../events/in_magn_z_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period
 What:		/sys/.../events/in_voltageY_supply_thresh_rising_period
 What:		/sys/.../events/in_voltageY_supply_thresh_falling_period
 What:		/sys/.../events/in_voltageY_supply_roc_rising_period
@@ -787,6 +851,10 @@ What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
 What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
@@ -853,6 +921,10 @@ What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
 What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
@@ -895,6 +967,19 @@ Description:
 		on-chip EEPROM. After power-up or chip reset the device will
 		automatically load the saved configuration.
 
+What:		/sys/.../iio:deviceX/in_proximity_raw
+What:		/sys/.../iio:deviceX/in_proximity_input
+What:		/sys/.../iio:deviceX/in_proximityY_raw
+KernelVersion:	3.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Proximity measurement indicating that some
+		object is near the sensor, usually be observing
+		reflectivity of infrared or ultrasound emitted.
+		Often these sensors are unit less and as such conversion
+		to SI units is not possible.  Where it is, the units should
+		be meters.
+
 What:		/sys/.../iio:deviceX/in_illuminanceY_input
 What:		/sys/.../iio:deviceX/in_illuminanceY_raw
 What:		/sys/.../iio:deviceX/in_illuminanceY_mean_raw
@@ -933,3 +1018,13 @@ Description:
 		x y z w. Here x, y, and z component represents the axis about
 		which a rotation will occur and w component represents the
 		amount of rotation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw
+KernelVersion:	3.15
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw value of rotation from true/magnetic north measured with
+		or without compensation from tilt sensors.

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -14,14 +14,21 @@ Required properties:
 				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
+			Must be "samsung,exynos3250-adc" for
+				controllers compatible with ADC of Exynos3250.
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
 - #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock binding: handle to adc clock.
-- clock-names		From common clock binding: Shall be "adc".
+- clocks		From common clock bindings: handles to clocks specified
+			in "clock-names" property, in the same order.
+- clock-names		From common clock bindings: list of clock input names
+			used by ADC block:
+			- "adc" : ADC bus clock
+			- "sclk" : ADC special clock (only for Exynos3250 and
+				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
 Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +48,20 @@ adc: adc@12D10000 {
 	vdd-supply = <&buck5_reg>;
 };
 
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
+	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	interrupts = <0 137 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+	clock-names = "adc", "sclk";
+
+	vdd-supply = <&buck5_reg>;
+};
 
 Example: Adding child nodes in dts file
 

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -50,6 +50,7 @@ epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
 fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+fsl,mma8452		MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface

Documentation/devicetree/bindings/iio/adc/max1027-adc.txt

@@ -0,0 +1,22 @@
+* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
+  - reg: SPI chip select number for the device
+  - interrupt-parent: phandle to the parent interrupt controller
+  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+  - interrupts: IRQ line for the ADC
+  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "maxim,max1027";
+	reg = <0>;
+	interrupt-parent = <&gpio5>;
+	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+	spi-max-frequency = <1000000>;
+};

Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt

@@ -3,6 +3,10 @@
 Required properties:
 
   - compatible : should be "honeywell,hmc5843"
+  Other models which are supported with driver are:
+	"honeywell,hmc5883"
+	"honeywell,hmc5883l"
+	"honeywell,hmc5983"
   - reg : the I2C address of the magnetometer - typically 0x1e
 
 Optional properties:

Documentation/devicetree/bindings/iio/st-sensors.txt

@@ -0,0 +1,54 @@
+STMicroelectronics MEMS sensors
+
+The STMicroelectronics sensor devices are pretty straight-forward I2C or
+SPI devices, all sharing the same device tree descriptions no matter what
+type of sensor it is.
+
+Required properties:
+- compatible: see the list of valid compatible strings below
+- reg: the I2C or SPI address the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+- vddio-supply: an optional regulator that needs to be on to provide the
+  VDD IO power to the sensor.
+- st,drdy-int-pin: the pin on the package that will be used to signal
+  "data ready" (valid values: 1 or 2). This property is not configurable
+  on all sensors.
+
+Sensors may also have applicable pin control settings, those use the
+standard bindings from pinctrl/pinctrl-bindings.txt.
+
+Valid compatible strings:
+
+Accelerometers:
+- st,lsm303dlh-accel
+- st,lsm303dlhc-accel
+- st,lis3dh-accel
+- st,lsm330d-accel
+- st,lsm330dl-accel
+- st,lsm330dlc-accel
+- st,lis331dlh-accel
+- st,lsm303dl-accel
+- st,lsm303dlm-accel
+- st,lsm330-accel
+
+Gyroscopes:
+- st,l3g4200d-gyro
+- st,lsm330d-gyro
+- st,lsm330dl-gyro
+- st,lsm330dlc-gyro
+- st,l3gd20-gyro
+- st,l3g4is-gyro
+- st,lsm330-gyro
+
+Magnetometers:
+- st,lsm303dlhc-magn
+- st,lsm303dlm-magn
+- st,lis3mdl-magn
+
+Pressure sensors:
+- st,lps001wp-press
+- st,lps25h-press
+- st,lps331ap-press

Documentation/kernel-parameters.txt

@@ -1422,10 +1422,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ip=		[IP_PNP]
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
-	ip2=		[HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
-			See comment before ip2_setup() in
-			drivers/char/ip2/ip2base.c.
-
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken

MAINTAINERS

@@ -1796,6 +1796,13 @@ W:	http://bcache.evilpiepirate.org
 S:	Maintained:
 F:	drivers/md/bcache/
 
+BECEEM BCS200/BCS220-3/BCSM250 WIMAX SUPPORT
+M: Kevin McKinney <klmckinney1@gmail.com>
+M: Matthias Beyer <mail@beyermatthias.de>
+L: devel@driverdev.osuosl.org
+S: Maintained
+F: drivers/staging/bcm*
+
 BEFS FILE SYSTEM
 S:	Orphan
 F:	Documentation/filesystems/befs.txt
@@ -2859,6 +2866,7 @@ F:	drivers/staging/dgnc/
 DIGI EPCA PCI PRODUCTS
 M:	Lidza Louina <lidza.louina@gmail.com>
 M:	Mark Hounschell <markh@compro.net>
+M:	Daeseok Youn <daeseok.youn@gmail.com>
 L:	driverdev-devel@linuxdriverproject.org
 S:	Maintained
 F:	drivers/staging/dgap/
@@ -5075,13 +5083,6 @@ S:	Maintained
 F:	Documentation/hwmon/k8temp
 F:	drivers/hwmon/k8temp.c
 
-KTAP
-M:	Jovi Zhangwei <jovi.zhangwei@gmail.com>
-W:	http://www.ktap.org
-L:	ktap@freelists.org
-S:	Maintained
-F:	drivers/staging/ktap/
-
 KCONFIG
 M:	"Yann E. MORIN" <yann.morin.1998@free.fr>
 L:	linux-kbuild@vger.kernel.org
@@ -8569,37 +8570,12 @@ L:	devel@driverdev.osuosl.org
 S:	Supported
 F:	drivers/staging/
 
-STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
-M:	Henk de Groot <pe1dnn@amsat.org>
-S:	Odd Fixes
-F:	drivers/staging/wlags49_h2/
-F:	drivers/staging/wlags49_h25/
-
-STAGING - ASUS OLED
-M:	Jakub Schmidtke <sjakub@gmail.com>
-S:	Odd Fixes
-F:	drivers/staging/asus_oled/
-
 STAGING - COMEDI
 M:	Ian Abbott <abbotti@mev.co.uk>
 M:	H Hartley Sweeten <hsweeten@visionengravers.com>
 S:	Odd Fixes
 F:	drivers/staging/comedi/
 
-STAGING - CRYSTAL HD VIDEO DECODER
-M:	Naren Sankar <nsankar@broadcom.com>
-M:	Jarod Wilson <jarod@wilsonet.com>
-M:	Scott Davilla <davilla@4pi.com>
-M:	Manu Abraham <abraham.manu@gmail.com>
-S:	Odd Fixes
-F:	drivers/staging/crystalhd/
-
-STAGING - ECHO CANCELLER
-M:	Steve Underwood <steveu@coppice.org>
-M:	David Rowe <david@rowetel.com>
-S:	Odd Fixes
-F:	drivers/staging/echo/
-
 STAGING - ET131X NETWORK DRIVER
 M:	Mark Einon <mark.einon@gmail.com>
 S:	Odd Fixes
@@ -8610,11 +8586,6 @@ M:	Marek Belisko <marek.belisko@gmail.com>
 S:	Odd Fixes
 F:	drivers/staging/ft1000/
 
-STAGING - FRONTIER TRANZPORT AND ALPHATRACK
-M:	David Täht <d@teklibre.com>
-S:	Odd Fixes
-F:	drivers/staging/frontier/
-
 STAGING - GO7007 MPEG CODEC
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 S:	Maintained
@@ -8671,11 +8642,6 @@ L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/staging/rtl8723au/
 
-STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER
-M:	Teddy Wang <teddy.wang@siliconmotion.com.cn>
-S:	Odd Fixes
-F:	drivers/staging/sm7xxfb/
-
 STAGING - SLICOSS
 M:	Lior Dotan <liodot@gmail.com>
 M:	Christopher Harrer <charrer@alacritech.com>
@@ -8692,31 +8658,16 @@ M:	William Hubbs <w.d.hubbs@gmail.com>
 M:	Chris Brannon <chris@the-brannons.com>
 M:	Kirk Reiser <kirk@reisers.ca>
 M:	Samuel Thibault <samuel.thibault@ens-lyon.org>
-L:	speakup@braille.uwo.ca
+L:	speakup@linux-speakup.org
 W:	http://www.linux-speakup.org/
 S:	Odd Fixes
 F:	drivers/staging/speakup/
 
-STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
-S:	Odd Fixes
-F:	drivers/staging/tidspbridge/
-
-STAGING - USB ENE SM/MS CARD READER DRIVER
-M:	Al Cho <acho@novell.com>
-S:	Odd Fixes
-F:	drivers/staging/keucr/
-
 STAGING - VIA VT665X DRIVERS
 M:	Forest Bond <forest@alittletooquiet.net>
 S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
-STAGING - WINBOND IS89C35 WLAN USB DRIVER
-M:	Pavel Machek <pavel@ucw.cz>
-S:	Odd Fixes
-F:	drivers/staging/winbond/
-
 STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
 M:	Arnaud Patard <arnaud.patard@rtp-net.org>
 S:	Odd Fixes

arch/arm/boot/dts/exynos3250.dtsi

@@ -261,10 +261,11 @@
 		};
 
 		adc: adc@126C0000 {
-			compatible = "samsung,exynos-adc-v3";
+			compatible = "samsung,exynos3250-adc",
+				     "samsung,exynos-adc-v2";
 			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
 			interrupts = <0 137 0>;
-			clock-names = "adc", "sclk_tsadc";
+			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
 			io-channel-ranges;

arch/arm/mach-omap2/Makefile

@@ -232,10 +232,6 @@ obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
 obj-y					+= $(iommu-m) $(iommu-y)
 
-ifneq ($(CONFIG_TIDSPBRIDGE),)
-obj-y					+= dsp.o
-endif
-
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 

arch/arm/mach-omap2/common.c

@@ -14,7 +14,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_data/dsp-omap.h>
 
 #include "common.h"
 #include "omap-secure.h"
@@ -30,7 +29,6 @@ int __weak omap_secure_ram_reserve_memblock(void)
 
 void __init omap_reserve(void)
 {
-	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
 	omap_barrier_reserve_memblock();
 }

arch/arm/mach-omap2/dsp.c

@@ -1,134 +0,0 @@
-/*
- * TI's OMAP DSP platform device registration
- *
- * Copyright (C) 2005-2006 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * XXX The function pointers to the PRM/CM functions are incorrect and
- * should be removed.  No device driver should be changing PRM/CM bits
- * directly; that's a layering violation -- those bits are the responsibility
- * of the OMAP PM core code.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/memblock.h>
-
-#include "control.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#ifdef CONFIG_TIDSPBRIDGE_DVFS
-#include "omap-pm.h"
-#endif
-#include "soc.h"
-
-#include <linux/platform_data/dsp-omap.h>
-
-static struct platform_device *omap_dsp_pdev;
-
-static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_TIDSPBRIDGE_DVFS
-	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
-	.dsp_get_opp = omap_pm_dsp_get_opp,
-	.cpu_set_freq = omap_pm_cpu_set_freq,
-	.cpu_get_freq = omap_pm_cpu_get_freq,
-#endif
-	.dsp_prm_read = omap2_prm_read_mod_reg,
-	.dsp_prm_write = omap2_prm_write_mod_reg,
-	.dsp_prm_rmw_bits = omap2_prm_rmw_mod_reg_bits,
-	.dsp_cm_read = omap2_cm_read_mod_reg,
-	.dsp_cm_write = omap2_cm_write_mod_reg,
-	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
-
-	.set_bootaddr = omap_ctrl_write_dsp_boot_addr,
-	.set_bootmode = omap_ctrl_write_dsp_boot_mode,
-};
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	if (!size)
-		return;
-
-	paddr = arm_memblock_steal(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %llx bytes\n",
-				__func__, (unsigned long long)size);
-		return;
-	}
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-static phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-
-static int __init omap_dsp_init(void)
-{
-	struct platform_device *pdev;
-	int err = -ENOMEM;
-	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
-
-	if (pdata->phys_mempool_base) {
-		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-		pr_info("%s: %llx bytes @ %llx\n", __func__,
-			(unsigned long long)pdata->phys_mempool_size,
-			(unsigned long long)pdata->phys_mempool_base);
-	}
-
-	pdev = platform_device_alloc("omap-dsp", -1);
-	if (!pdev)
-		goto err_out;
-
-	err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-	if (err)
-		goto err_out;
-
-	err = platform_device_add(pdev);
-	if (err)
-		goto err_out;
-
-	omap_dsp_pdev = pdev;
-	return 0;
-
-err_out:
-	platform_device_put(pdev);
-	return err;
-}
-module_init(omap_dsp_init);
-
-static void __exit omap_dsp_exit(void)
-{
-	if (!cpu_is_omap34xx())
-		return;
-
-	platform_device_unregister(omap_dsp_pdev);
-}
-module_exit(omap_dsp_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("TI's OMAP DSP platform device registration");
-MODULE_LICENSE("GPL");

arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -317,10 +317,14 @@ static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports)
 	for (index = 0; index < num_ports; index++) {
 		int ipd_port = cvmx_helper_get_ipd_port(interface, index);
 		__cvmx_helper_sgmii_hardware_init_one_time(interface, index);
-		__cvmx_helper_sgmii_link_set(ipd_port,
-					     __cvmx_helper_sgmii_link_get
-					     (ipd_port));
-
+		/* Linux kernel driver will call ....link_set with the
+		 * proper link state. In the simulator there is no
+		 * link state polling and hence it is set from
+		 * here.
+		 */
+		if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
+			__cvmx_helper_sgmii_link_set(ipd_port,
+				       __cvmx_helper_sgmii_link_get(ipd_port));
 	}
 
 	return 0;

arch/mips/configs/cavium_octeon_defconfig

@@ -124,7 +124,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_STAGING=y
 CONFIG_OCTEON_ETHERNET=y
-# CONFIG_NET_VENDOR_SILICOM is not set
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y

arch/parisc/configs/generic-64bit_defconfig

@@ -241,7 +241,6 @@ CONFIG_UIO_AEC=m
 CONFIG_UIO_SERCOS3=m
 CONFIG_UIO_PCI_GENERIC=m
 CONFIG_STAGING=y
-# CONFIG_NET_VENDOR_SILICOM is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y

arch/powerpc/configs/85xx/kmp204x_defconfig

@@ -192,7 +192,6 @@ CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_CMOS=y
 CONFIG_UIO=y
 CONFIG_STAGING=y
-# CONFIG_NET_VENDOR_SILICOM is not set
 CONFIG_CLK_PPC_CORENET=y
 CONFIG_EXT2_FS=y
 CONFIG_NTFS_FS=y

drivers/base/devres.c

@@ -816,6 +816,61 @@ char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp)
 }
 EXPORT_SYMBOL_GPL(devm_kstrdup);
 
+/**
+ * devm_kvasprintf - Allocate resource managed space
+ *			for the formatted string.
+ * @dev: Device to allocate memory for
+ * @gfp: the GFP mask used in the devm_kmalloc() call when
+ *       allocating memory
+ * @fmt: the formatted string to duplicate
+ * @ap: the list of tokens to be placed in the formatted string
+ * RETURNS:
+ * Pointer to allocated string on success, NULL on failure.
+ */
+char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
+		      va_list ap)
+{
+	unsigned int len;
+	char *p;
+	va_list aq;
+
+	va_copy(aq, ap);
+	len = vsnprintf(NULL, 0, fmt, aq);
+	va_end(aq);
+
+	p = devm_kmalloc(dev, len+1, gfp);
+	if (!p)
+		return NULL;
+
+	vsnprintf(p, len+1, fmt, ap);
+
+	return p;
+}
+EXPORT_SYMBOL(devm_kvasprintf);
+
+/**
+ * devm_kasprintf - Allocate resource managed space
+ *		and copy an existing formatted string into that
+ * @dev: Device to allocate memory for
+ * @gfp: the GFP mask used in the devm_kmalloc() call when
+ *       allocating memory
+ * @fmt: the string to duplicate
+ * RETURNS:
+ * Pointer to allocated string on success, NULL on failure.
+ */
+char *devm_kasprintf(struct device *dev, gfp_t gfp, const char *fmt, ...)
+{
+	va_list ap;
+	char *p;
+
+	va_start(ap, fmt);
+	p = devm_kvasprintf(dev, gfp, fmt, ap);
+	va_end(ap);
+
+	return p;
+}
+EXPORT_SYMBOL_GPL(devm_kasprintf);
+
 /**
  * devm_kfree - Resource-managed kfree
  * @dev: Device this memory belongs to

drivers/iio/accel/Kconfig

@@ -77,4 +77,16 @@ config MMA8452
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
 
+config KXCJK1013
+	tristate "Kionix 3-Axis Accelerometer Driver"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Kionix KXCJK-1013
+	  triaxial acceleration sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called kxcjk-1013.
+
 endmenu

drivers/iio/accel/Makefile

@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
 obj-$(CONFIG_MMA8452)	+= mma8452.o