Merge tag 'marvell-mvebu-clk-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell MVEBU clk support, for 3.8

Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt

@@ -5,6 +5,7 @@ Required properties:
 - compatible: Should be "marvell,armada-370-xp-timer"
 - interrupts: Should contain the list of Global Timer interrupts
 - reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
 
 Optional properties:
 - marvell,timer-25Mhz: Tells whether the Global timer supports the 25

Documentation/devicetree/bindings/clock/mvebu-core-clock.txt

@@ -0,0 +1,47 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt

@@ -0,0 +1,21 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

@@ -0,0 +1,119 @@
+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 0
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};

arch/arm/Kconfig

@@ -533,6 +533,7 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI

arch/arm/boot/dts/armada-370-db.dts

@@ -34,9 +34,5 @@
 			clock-frequency = <200000000>;
 			status = "okay";
 		};
-		timer@d0020300 {
-			clock-frequency = <600000000>;
-			status = "okay";
-		};
 	};
 };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -62,6 +62,7 @@
 			       compatible = "marvell,armada-370-xp-timer";
 			       reg = <0xd0020300 0x30>;
 			       interrupts = <37>, <38>, <39>, <40>;
+			       clocks = <&coreclk 2>;
 		};
 
 		addr-decoding@d0020000 {

arch/arm/boot/dts/armada-370.dtsi

@@ -75,5 +75,20 @@
 			#interrupts-cells = <2>;
 			interrupts = <91>;
 		};
+
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-370-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-370-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
+
 	};
 };

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -24,6 +24,18 @@
 		gpio1 = &gpio1;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+	}
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78230-pinctrl";

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -25,6 +25,25 @@
 		gpio2 = &gpio2;
 	};
 
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78260-pinctrl";

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -25,6 +25,40 @@
 		gpio2 = &gpio2;
 	};
 
+
+	cpus {
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    cpu@0 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <0>;
+		clocks = <&cpuclk 0>;
+	    };
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+
+	    cpu@2 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <2>;
+		clocks = <&cpuclk 2>;
+	    };
+
+	    cpu@3 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <3>;
+		clocks = <&cpuclk 3>;
+	    };
+	};
+
 	soc {
 		pinctrl {
 			compatible = "marvell,mv78460-pinctrl";

arch/arm/boot/dts/armada-xp.dtsi

@@ -47,6 +47,26 @@
 				marvell,timer-25Mhz;
 		};
 
+		coreclk: mvebu-sar@d0018230 {
+			compatible = "marvell,armada-xp-core-clock";
+			reg = <0xd0018230 0x08>;
+			#clock-cells = <1>;
+		};
+
+		cpuclk: clock-complex@d0018700 {
+			#clock-cells = <1>;
+			compatible = "marvell,armada-xp-cpu-clock";
+			reg = <0xd0018700 0xA0>;
+			clocks = <&coreclk 1>;
+		};
+
+		gateclk: clock-gating-control@d0018220 {
+			compatible = "marvell,armada-xp-gating-clock";
+			reg = <0xd0018220 0x4>;
+			clocks = <&coreclk 0>;
+			#clock-cells = <1>;
+		};
+
 		system-controller@d0018200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0xd0018200 0x500>;

arch/arm/boot/dts/dove.dtsi

@@ -31,6 +31,19 @@
 			reg = <0x20204 0x04>, <0x20214 0x04>;
 		};
 
+		core_clk: core-clocks@d0214 {
+			compatible = "marvell,dove-core-clock";
+			reg = <0xd0214 0x4>;
+			#clock-cells = <1>;
+		};
+
+		gate_clk: clock-gating-control@d0038 {
+			compatible = "marvell,dove-gating-clock";
+			reg = <0xd0038 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -100,6 +113,7 @@
 			cell-index = <0>;
 			interrupts = <6>;
 			reg = <0x10600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -110,6 +124,7 @@
 			cell-index = <1>;
 			interrupts = <5>;
 			reg = <0x14600 0x28>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -121,6 +136,7 @@
 			interrupts = <11>;
 			clock-frequency = <400000>;
 			timeout-ms = <1000>;
+			clocks = <&core_clk 0>;
 			status = "disabled";
 		};
 
@@ -128,6 +144,7 @@
 			compatible = "marvell,dove-sdhci";
 			reg = <0x92000 0x100>;
 			interrupts = <35>, <37>;
+			clocks = <&gate_clk 8>;
 			status = "disabled";
 		};
 
@@ -135,6 +152,7 @@
 			compatible = "marvell,dove-sdhci";
 			reg = <0x90000 0x100>;
 			interrupts = <36>, <38>;
+			clocks = <&gate_clk 9>;
 			status = "disabled";
 		};
 
@@ -142,6 +160,7 @@
 			compatible = "marvell,orion-sata";
 			reg = <0xa0000 0x2400>;
 			interrupts = <62>;
+			clocks = <&gate_clk 3>;
 			nr-ports = <1>;
 			status = "disabled";
 		};
@@ -152,6 +171,7 @@
 			      <0xc8000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <31>;
+			clocks = <&gate_clk 15>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/kirkwood.dtsi

@@ -19,6 +19,12 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+	        	#clock-cells = <1>;
+		};
+
 		gpio0: gpio@10100 {
 			compatible = "marvell,orion-gpio";
 			#gpio-cells = <2>;
@@ -42,6 +48,7 @@
 			reg = <0x12000 0x100>;
 			reg-shift = <2>;
 			interrupts = <33>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -51,6 +58,7 @@
 			reg = <0x12100 0x100>;
 			reg-shift = <2>;
 			interrupts = <34>;
+			clocks = <&gate_clk 7>;
 			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
@@ -68,12 +76,21 @@
 			cell-index = <0>;
 			interrupts = <23>;
 			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
 		wdt@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
+			clocks = <&gate_clk 7>;
 			status = "okay";
 		};
 
@@ -81,6 +98,8 @@
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
 			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
 			status = "disabled";
 		};
 
@@ -94,6 +113,7 @@
 			reg = <0x3000000 0x400>;
 			chip-delay = <25>;
 			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -104,6 +124,7 @@
 			#size-cells = <0>;
 			interrupts = <29>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 
@@ -113,6 +134,7 @@
 			      <0xf5000000 0x800>;
 			reg-names = "regs", "sram";
 			interrupts = <22>;
+			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
 	};

arch/arm/mach-dove/Kconfig

@@ -17,6 +17,8 @@ config MACH_CM_A510
 
 config MACH_DOVE_DT
 	bool "Marvell Dove Flattened Device Tree"
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-dove/common.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
@@ -376,19 +377,52 @@ void dove_restart(char mode, const char *cmd)
 
 #if defined(CONFIG_MACH_DOVE_DT)
 /*
- * Auxdata required until real OF clock provider
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
  */
-struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
-	OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
-	{},
-};
+static void __init dove_legacy_clk_init(void)
+{
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+					 "marvell,dove-gating-clock");
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_USB1;
+	orion_clkdev_add(NULL, "orion-ehci.1",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_XOR0;
+	orion_clkdev_add(NULL, "mv_xor_shared.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CLOCK_GATING_BIT_XOR1;
+	orion_clkdev_add(NULL, "mv_xor_shared.1",
+			 of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	dove_legacy_clk_init();
+}
 
 static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
@@ -405,7 +439,7 @@ static void __init dove_dt_init(void)
 	dove_setup_cpu_mbus();
 
 	/* Setup root of clk tree */
-	dove_clk_init();
+	dove_of_clk_init();
 
 	/* Internal devices not ported to DT yet */
 	dove_rtc_init();
@@ -417,8 +451,7 @@ static void __init dove_dt_init(void)
 	dove_ehci1_init();
 	dove_pcie_init(1, 1);
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     dove_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char * const dove_dt_board_compat[] = {

arch/arm/mach-kirkwood/Kconfig

@@ -46,6 +46,8 @@ config MACH_GURUPLUG
 
 config ARCH_KIRKWOOD_DT
 	bool "Marvell Kirkwood Flattened Device Tree"
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_GATING
 	select USE_OF
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-kirkwood/board-dt.c

@@ -14,11 +14,15 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
 #include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/irq.h>
+#include <plat/common.h>
 #include "common.h"
 
 static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -26,16 +30,58 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
-	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
-		       NULL),
-	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
-	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
-	OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
-	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
-	{},
-};
+/*
+ * There are still devices that doesn't know about DT yet.  Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+	struct device_node *np = of_find_compatible_node(
+		NULL, NULL, "marvell,kirkwood-gating-clock");
+
+	struct of_phandle_args clkspec;
+
+	clkspec.np = np;
+	clkspec.args_count = 1;
+
+	clkspec.args[0] = CGC_BIT_GE0;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX0;
+	orion_clkdev_add("0", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_USB0;
+	orion_clkdev_add(NULL, "orion-ehci.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_XOR0;
+	orion_clkdev_add(NULL, "mv_xor_shared.0",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_XOR1;
+	orion_clkdev_add(NULL, "mv_xor_shared.1",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_PEX1;
+	orion_clkdev_add("1", "pcie",
+			 of_clk_get_from_provider(&clkspec));
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+			 of_clk_get_from_provider(&clkspec));
+
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+	mvebu_clocks_init();
+	kirkwood_legacy_clk_init();
+}
 
 static void __init kirkwood_dt_init(void)
 {
@@ -54,7 +100,7 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_l2_init();
 
 	/* Setup root of clk tree */
-	kirkwood_clk_init();
+	kirkwood_of_clk_init();
 
 	/* internal devices that every board has */
 	kirkwood_xor0_init();
@@ -94,8 +140,7 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("keymile,km_kirkwood"))
 		km_kirkwood_init();
 
-	of_platform_populate(NULL, kirkwood_dt_match_table,
-			     kirkwood_auxdata_lookup, NULL);
+	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {

arch/arm/mach-mvebu/Kconfig

@@ -9,6 +9,10 @@ config ARCH_MVEBU
 	select PINCTRL
 	select PLAT_ORION
 	select SPARSE_IRQ
+	select CLKDEV_LOOKUP
+	select MVEBU_CLK_CORE
+	select MVEBU_CLK_CPU
+	select MVEBU_CLK_GATING
 
 if ARCH_MVEBU
 

arch/arm/mach-mvebu/armada-370-xp.c

@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/time-armada-370-xp.h>
+#include <linux/clk/mvebu.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -37,8 +38,14 @@ void __init armada_370_xp_map_io(void)
 	iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
 }
 
+void __init armada_370_xp_timer_and_clk_init(void)
+{
+	mvebu_clocks_init();
+	armada_370_xp_timer_init();
+}
+
 struct sys_timer armada_370_xp_timer = {
-	.init		= armada_370_xp_timer_init,
+	.init		= armada_370_xp_timer_and_clk_init,
 };
 
 static void __init armada_370_xp_dt_init(void)