You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
Merge branches 'acpi-init' and 'acpica'
* acpi-init: ACPI / init: Fix the ordering of acpi_reserve_resources() * acpica: Revert "ACPICA: Permanently set _REV to the value '2'."
This commit is contained in:
Rafael J. Wysocki
@@ -3709,6 +3709,13 @@ N: Dirk Verworner
|
||||
D: Co-author of German book ``Linux-Kernel-Programmierung''
|
||||
D: Co-founder of Berlin Linux User Group
|
||||
|
||||
N: Andrew Victor
|
||||
E: linux@maxim.org.za
|
||||
W: http://maxim.org.za/at91_26.html
|
||||
D: First maintainer of Atmel ARM-based SoC, aka AT91
|
||||
D: Introduced support for at91rm9200, the first chip of AT91 family
|
||||
S: South Africa
|
||||
|
||||
N: Riku Voipio
|
||||
E: riku.voipio@iki.fi
|
||||
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
|
||||
|
||||
@@ -505,7 +505,10 @@ at module load time (for a module) with:
|
||||
|
||||
The addresses are normal I2C addresses. The adapter is the string
|
||||
name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
|
||||
It is *NOT* i2c-<n> itself.
|
||||
It is *NOT* i2c-<n> itself. Also, the comparison is done ignoring
|
||||
spaces, so if the name is "This is an I2C chip" you can say
|
||||
adapter_name=ThisisanI2cchip. This is because it's hard to pass in
|
||||
spaces in kernel parameters.
|
||||
|
||||
The debug flags are bit flags for each BMC found, they are:
|
||||
IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
|
||||
|
||||
@@ -253,7 +253,7 @@ input driver:
|
||||
GPIO support
|
||||
~~~~~~~~~~~~
|
||||
ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
|
||||
and GpioInt. These resources are used be used to pass GPIO numbers used by
|
||||
and GpioInt. These resources can be used to pass GPIO numbers used by
|
||||
the device to the driver. ACPI 5.1 extended this with _DSD (Device
|
||||
Specific Data) which made it possible to name the GPIOs among other things.
|
||||
|
||||
|
||||
@@ -1,9 +1,9 @@
|
||||
_DSD Device Properties Related to GPIO
|
||||
--------------------------------------
|
||||
|
||||
With the release of ACPI 5.1 and the _DSD configuration objecte names
|
||||
can finally be given to GPIOs (and other things as well) returned by
|
||||
_CRS. Previously, we were only able to use an integer index to find
|
||||
With the release of ACPI 5.1, the _DSD configuration object finally
|
||||
allows names to be given to GPIOs (and other things as well) returned
|
||||
by _CRS. Previously, we were only able to use an integer index to find
|
||||
the corresponding GPIO, which is pretty error prone (it depends on
|
||||
the _CRS output ordering, for example).
|
||||
|
||||
|
||||
@@ -6,6 +6,7 @@ provided by Arteris.
|
||||
Required properties:
|
||||
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
|
||||
Should be "ti,omap4-l3-noc" for OMAP4 family
|
||||
Should be "ti,omap5-l3-noc" for OMAP5 family
|
||||
Should be "ti,dra7-l3-noc" for DRA7 family
|
||||
Should be "ti,am4372-l3-noc" for AM43 family
|
||||
- reg: Contains L3 register address range for each noc domain.
|
||||
|
||||
@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
|
||||
80 81 68 69
|
||||
70 71 72 73
|
||||
74 75 76 77>;
|
||||
interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
|
||||
interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
|
||||
"saif0", "saif1", "i2c0", "i2c1",
|
||||
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
|
||||
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
Abracon ABX80X I2C ultra low power RTC/Alarm chip
|
||||
|
||||
The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
|
||||
ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
|
||||
is the superset of ab180x.
|
||||
|
||||
Required properties:
|
||||
|
||||
- "compatible": should one of:
|
||||
"abracon,abx80x"
|
||||
"abracon,ab0801"
|
||||
"abracon,ab0803"
|
||||
"abracon,ab0804"
|
||||
"abracon,ab0805"
|
||||
"abracon,ab1801"
|
||||
"abracon,ab1803"
|
||||
"abracon,ab1804"
|
||||
"abracon,ab1805"
|
||||
Using "abracon,abx80x" will enable chip autodetection.
|
||||
- "reg": I2C bus address of the device
|
||||
|
||||
Optional properties:
|
||||
|
||||
The abx804 and abx805 have a trickle charger that is able to charge the
|
||||
connected battery or supercap. Both the following properties have to be defined
|
||||
and valid to enable charging:
|
||||
|
||||
- "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
|
||||
- "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
|
||||
resistor, the other values are in ohm.
|
||||
@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
|
||||
bugs.
|
||||
|
||||
KASan uses compile-time instrumentation for checking every memory access,
|
||||
therefore you will need a certain version of GCC > 4.9.2
|
||||
therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
|
||||
of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
|
||||
used to built the kernel.
|
||||
|
||||
Currently KASan is supported only for x86_64 architecture and requires that the
|
||||
kernel be built with the SLUB allocator.
|
||||
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
|
||||
|
||||
and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
|
||||
is compiler instrumentation types. The former produces smaller binary the
|
||||
latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
|
||||
latter.
|
||||
latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
|
||||
of 5.0 or later.
|
||||
|
||||
Currently KASAN works only with the SLUB memory allocator.
|
||||
For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
|
||||
|
||||
+18
-8
@@ -892,11 +892,10 @@ S: Maintained
|
||||
F: arch/arm/mach-alpine/
|
||||
|
||||
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
|
||||
M: Andrew Victor <linux@maxim.org.za>
|
||||
M: Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
||||
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
W: http://maxim.org.za/at91_26.html
|
||||
W: http://www.linux4sam.org
|
||||
S: Supported
|
||||
F: arch/arm/mach-at91/
|
||||
@@ -990,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c
|
||||
F: drivers/clocksource/timer-atlas7.c
|
||||
N: [^a-z]sirf
|
||||
|
||||
ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
|
||||
M: Baruch Siach <baruch@tkos.co.il>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
N: digicolor
|
||||
|
||||
ARM/EBSA110 MACHINE SUPPORT
|
||||
M: Russell King <linux@arm.linux.org.uk>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
|
||||
M: Dinh Nguyen <dinguyen@opensource.altera.com>
|
||||
S: Maintained
|
||||
F: arch/arm/mach-socfpga/
|
||||
F: arch/arm/boot/dts/socfpga*
|
||||
F: arch/arm/configs/socfpga_defconfig
|
||||
W: http://www.rocketboards.org
|
||||
T: git://git.rocketboards.org/linux-socfpga.git
|
||||
T: git://git.rocketboards.org/linux-socfpga-next.git
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
|
||||
|
||||
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
|
||||
M: Dinh Nguyen <dinguyen@opensource.altera.com>
|
||||
@@ -2116,8 +2122,9 @@ S: Supported
|
||||
F: drivers/net/ethernet/broadcom/bnx2x/
|
||||
|
||||
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
|
||||
M: Christian Daudt <bcm@fixthebug.org>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
M: Ray Jui <rjui@broadcom.com>
|
||||
M: Scott Branden <sbranden@broadcom.com>
|
||||
L: bcm-kernel-feedback-list@broadcom.com
|
||||
T: git git://github.com/broadcom/mach-bcm
|
||||
S: Maintained
|
||||
@@ -2168,7 +2175,6 @@ S: Maintained
|
||||
F: drivers/usb/gadget/udc/bcm63xx_udc.*
|
||||
|
||||
BROADCOM BCM7XXX ARM ARCHITECTURE
|
||||
M: Marc Carino <marc.ceeeee@gmail.com>
|
||||
M: Brian Norris <computersforpeace@gmail.com>
|
||||
M: Gregory Fong <gregory.0xf0@gmail.com>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
@@ -5042,17 +5048,19 @@ S: Orphan
|
||||
F: drivers/video/fbdev/imsttfb.c
|
||||
|
||||
INFINIBAND SUBSYSTEM
|
||||
M: Roland Dreier <roland@kernel.org>
|
||||
M: Doug Ledford <dledford@redhat.com>
|
||||
M: Sean Hefty <sean.hefty@intel.com>
|
||||
M: Hal Rosenstock <hal.rosenstock@gmail.com>
|
||||
L: linux-rdma@vger.kernel.org
|
||||
W: http://www.openfabrics.org/
|
||||
Q: http://patchwork.kernel.org/project/linux-rdma/list/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
|
||||
T: git git://github.com/dledford/linux.git
|
||||
S: Supported
|
||||
F: Documentation/infiniband/
|
||||
F: drivers/infiniband/
|
||||
F: include/uapi/linux/if_infiniband.h
|
||||
F: include/uapi/rdma/
|
||||
F: include/rdma/
|
||||
|
||||
INOTIFY
|
||||
M: John McCutchan <john@johnmccutchan.com>
|
||||
@@ -5805,6 +5813,7 @@ F: drivers/scsi/53c700*
|
||||
LED SUBSYSTEM
|
||||
M: Bryan Wu <cooloney@gmail.com>
|
||||
M: Richard Purdie <rpurdie@rpsys.net>
|
||||
M: Jacek Anaszewski <j.anaszewski@samsung.com>
|
||||
L: linux-leds@vger.kernel.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
|
||||
S: Maintained
|
||||
@@ -11037,6 +11046,7 @@ F: drivers/media/pci/zoran/
|
||||
ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
|
||||
M: Minchan Kim <minchan@kernel.org>
|
||||
M: Nitin Gupta <ngupta@vflare.org>
|
||||
R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/block/zram/
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
VERSION = 4
|
||||
PATCHLEVEL = 1
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc2
|
||||
EXTRAVERSION = -rc3
|
||||
NAME = Hurr durr I'ma sheep
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
||||
@@ -49,7 +49,7 @@
|
||||
pinctrl-0 = <&matrix_keypad_pins>;
|
||||
|
||||
debounce-delay-ms = <5>;
|
||||
col-scan-delay-us = <1500>;
|
||||
col-scan-delay-us = <5>;
|
||||
|
||||
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
|
||||
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
|
||||
@@ -473,7 +473,7 @@
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <31 0>;
|
||||
|
||||
wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
||||
|
||||
touchscreen-size-x = <480>;
|
||||
touchscreen-size-y = <272>;
|
||||
|
||||
@@ -18,6 +18,7 @@
|
||||
aliases {
|
||||
rtc0 = &mcp_rtc;
|
||||
rtc1 = &tps659038_rtc;
|
||||
rtc2 = &rtc;
|
||||
};
|
||||
|
||||
memory {
|
||||
@@ -83,7 +84,7 @@
|
||||
gpio_fan: gpio_fan {
|
||||
/* Based on 5v 500mA AFB02505HHB */
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
gpio-fan,speed-map = <0 0>,
|
||||
<13000 1>;
|
||||
#cooling-cells = <2>;
|
||||
@@ -130,8 +131,8 @@
|
||||
|
||||
uart3_pins_default: uart3_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
|
||||
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
|
||||
0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
|
||||
0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
@@ -455,7 +456,7 @@
|
||||
mcp_rtc: rtc@6f {
|
||||
compatible = "microchip,mcp7941x";
|
||||
reg = <0x6f>;
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcp79410_pins_default>;
|
||||
@@ -478,7 +479,7 @@
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&dra7_pmx_core 0x248>;
|
||||
<&dra7_pmx_core 0x3f8>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins_default>;
|
||||
|
||||
@@ -105,6 +105,10 @@
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
rtc@10300 {
|
||||
/* No crystal connected to the internal RTC */
|
||||
status = "disabled";
|
||||
};
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -911,7 +911,7 @@
|
||||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
|
||||
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
|
||||
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
|
||||
<0x4ae0c158 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
@@ -944,7 +944,7 @@
|
||||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
|
||||
<0x4a002470 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
@@ -977,7 +977,7 @@
|
||||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
|
||||
<0x4a00246c 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
@@ -1010,7 +1010,7 @@
|
||||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
|
||||
<0x4ae0c154 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
@@ -1203,7 +1203,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@48838000 {
|
||||
rtc: rtc@48838000 {
|
||||
compatible = "ti,am3352-rtc";
|
||||
reg = <0x48838000 0x100>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
||||
@@ -9,6 +9,7 @@
|
||||
|
||||
#include <dt-bindings/sound/samsung-i2s.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/clock/maxim,max77686.h>
|
||||
#include "exynos4412.dtsi"
|
||||
|
||||
/ {
|
||||
@@ -105,6 +106,8 @@
|
||||
|
||||
rtc@10070000 {
|
||||
status = "okay";
|
||||
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
|
||||
clock-names = "rtc", "rtc_src";
|
||||
};
|
||||
|
||||
g2d@10800000 {
|
||||
|
||||
@@ -567,6 +567,7 @@
|
||||
num-slots = <1>;
|
||||
broken-cd;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <2 3>;
|
||||
|
||||
@@ -28,7 +28,7 @@ trips {
|
||||
type = "active";
|
||||
};
|
||||
cpu-crit-0 {
|
||||
temperature = <1200000>; /* millicelsius */
|
||||
temperature = <120000>; /* millicelsius */
|
||||
hysteresis = <0>; /* millicelsius */
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
@@ -536,6 +536,7 @@
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
power-domains = <&disp_pd>;
|
||||
};
|
||||
|
||||
mipi_phy: video-phy@10040714 {
|
||||
|
||||
@@ -18,7 +18,7 @@ trips {
|
||||
type = "active";
|
||||
};
|
||||
cpu-crit-0 {
|
||||
temperature = <1050000>; /* millicelsius */
|
||||
temperature = <105000>; /* millicelsius */
|
||||
hysteresis = <0>; /* millicelsius */
|
||||
type = "critical";
|
||||
};
|
||||
|
||||
@@ -12,6 +12,7 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "imx23.dtsi"
|
||||
|
||||
/ {
|
||||
@@ -93,6 +94,7 @@
|
||||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
dr_mode = "host";
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -122,7 +124,7 @@
|
||||
|
||||
user {
|
||||
label = "green";
|
||||
gpios = <&gpio2 1 1>;
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user