Merge branch 'for-linus' into for-next

Merging the HD-audio fixes back to base devel branch for further
working on it.

Documentation/CodeOfConflict

@@ -0,0 +1,27 @@
+Code of Conflict
+----------------
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software.  Your code and ideas
+behind it will be carefully reviewed, often resulting in critique and
+criticism.  The review will almost always require improvements to the
+code before it can be included in the kernel.  Know that this happens
+because everyone involved wants to see the best possible solution for
+the overall success of Linux.  This development process has been proven
+to create the most robust operating system kernel ever, and we do not
+want to do anything to cause the quality of submission and eventual
+result to ever decrease.
+
+If however, anyone feels personally abused, threatened, or otherwise
+uncomfortable due to this process, that is not acceptable.  If so,
+please contact the Linux Foundation's Technical Advisory Board at
+<tab@lists.linux-foundation.org>, or the individual members, and they
+will work to resolve the issue to the best of their ability.  For more
+information on who is on the Technical Advisory Board and what their
+role is, please see:
+	http://www.linuxfoundation.org/programs/advisory-councils/tab
+
+As a reviewer of code, please strive to keep things civil and focused on
+the technical issues involved.  We are all humans, and frustrations can
+be high on both sides of the process.  Try to keep in mind the immortal
+words of Bill and Ted, "Be excellent to each other."

Documentation/devicetree/bindings/i2c/i2c-imx.txt

@@ -7,6 +7,7 @@ Required properties:
   - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
 - reg : Should contain I2C/HS-I2C registers location and length
 - interrupts : Should contain I2C/HS-I2C interrupt
+- clocks : Should contain the I2C/HS-I2C clock specifier
 
 Optional properties:
 - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.

Documentation/devicetree/bindings/net/amd-xgbe-phy.txt

@@ -27,6 +27,8 @@ property is used.
 - amd,serdes-cdr-rate: CDR rate speed selection
 - amd,serdes-pq-skew: PQ (data sampling) skew
 - amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
 
 Example:
 	xgbe_phy@e1240800 {
@@ -41,4 +43,6 @@ Example:
 		amd,serdes-cdr-rate = <2>, <2>, <7>;
 		amd,serdes-pq-skew = <10>, <10>, <30>;
 		amd,serdes-tx-amp = <15>, <15>, <10>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
 	};

Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt

@@ -21,6 +21,18 @@ Optional properties:
 - reg-io-width : the size (in bytes) of the IO accesses that should be
   performed on the device.  If this property is not present then single byte
   accesses are used.
+- dcd-override : Override the DCD modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- dsr-override : Override the DTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- cts-override : Override the CTS modem status signal. This signal will always
+  be reported as active instead of being obtained from the modem status
+  register. Define this if your serial port does not use this pin.
+- ri-override : Override the RI modem status signal. This signal will always be
+  reported as inactive instead of being obtained from the modem status register.
+  Define this if your serial port does not use this pin.
 
 Example:
 
@@ -31,6 +43,10 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		dcd-override;
+		dsr-override;
+		cts-override;
+		ri-override;
 	};
 
 Example with one clock:

Documentation/power/suspend-and-interrupts.txt

@@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
 
 The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
 requesting a special-purpose interrupt.  It causes suspend_device_irqs() to
-leave the corresponding IRQ enabled so as to allow the interrupt to work all
-the time as expected.
+leave the corresponding IRQ enabled so as to allow the interrupt to work as
+expected during the suspend-resume cycle, but does not guarantee that the
+interrupt will wake the system from a suspended state -- for such cases it is
+necessary to use enable_irq_wake().
 
 Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
 user of it.  Thus, if the IRQ is shared, all of the interrupt handlers installed
@@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
 IRQF_NO_SUSPEND and enable_irq_wake()
 -------------------------------------
 
-There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
-flag on the same IRQ.
+There are very few valid reasons to use both enable_irq_wake() and the
+IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
+same device.
 
 First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
 interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
 
 Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
 to individual interrupt handlers, so sharing an IRQ between a system wakeup
-interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
+interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
+make sense.
+
+In rare cases an IRQ can be shared between a wakeup device driver and an
+IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
+must be able to discern spurious IRQs from genuine wakeup events (signalling
+the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
+ensure that the IRQ will function as a wakeup source, and must request the IRQ
+with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
+these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.

MAINTAINERS

@@ -2065,7 +2065,7 @@ F:	include/net/bluetooth/
 BONDING DRIVER
 M:	Jay Vosburgh <j.vosburgh@gmail.com>
 M:	Veaceslav Falico <vfalico@gmail.com>
-M:	Andy Gospodarek <andy@greyhouse.net>
+M:	Andy Gospodarek <gospo@cumulusnetworks.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -8480,6 +8480,14 @@ S:	Supported
 L:	netdev@vger.kernel.org
 F:	drivers/net/ethernet/samsung/sxgbe/
 
+SAMSUNG THERMAL DRIVER
+M:	Lukasz Majewski <l.majewski@samsung.com>
+L:	linux-pm@vger.kernel.org
+L:	linux-samsung-soc@vger.kernel.org
+S:	Supported
+T:	https://github.com/lmajewski/linux-samsung-thermal.git
+F:	drivers/thermal/samsung/
+
 SAMSUNG USB2 PHY DRIVER
 M:	Kamil Debski <k.debski@samsung.com>
 L:	linux-kernel@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arc/include/asm/processor.h

@@ -47,9 +47,6 @@ struct thread_struct {
 /* Forward declaration, a strange C thing */
 struct task_struct;
 
-/* Return saved PC of a blocked thread  */
-unsigned long thread_saved_pc(struct task_struct *t);
-
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
 
@@ -72,18 +69,21 @@ unsigned long thread_saved_pc(struct task_struct *t);
 #define release_segments(mm)        do { } while (0)
 
 #define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
+#define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
 
 /*
  * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
  * Look in process.c for details of kernel stack layout
  */
-#define KSTK_ESP(tsk)   (tsk->thread.ksp)
+#define TSK_K_ESP(tsk)		(tsk->thread.ksp)
 
-#define KSTK_REG(tsk, off)	(*((unsigned int *)(KSTK_ESP(tsk) + \
+#define TSK_K_REG(tsk, off)	(*((unsigned int *)(TSK_K_ESP(tsk) + \
 					sizeof(struct callee_regs) + off)))
 
-#define KSTK_BLINK(tsk) KSTK_REG(tsk, 4)
-#define KSTK_FP(tsk)    KSTK_REG(tsk, 0)
+#define TSK_K_BLINK(tsk)	TSK_K_REG(tsk, 4)
+#define TSK_K_FP(tsk)		TSK_K_REG(tsk, 0)
+
+#define thread_saved_pc(tsk)	TSK_K_BLINK(tsk)
 
 extern void start_thread(struct pt_regs * regs, unsigned long pc,
 			 unsigned long usp);

arch/arc/include/asm/stacktrace.h

@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+#include <linux/sched.h>
+
+/**
+ * arc_unwind_core - Unwind the kernel mode stack for an execution context
+ * @tsk:		NULL for current task, specific task otherwise
+ * @regs:		pt_regs used to seed the unwinder {SP, FP, BLINK, PC}
+ * 			If NULL, use pt_regs of @tsk (if !NULL) otherwise
+ * 			use the current values of {SP, FP, BLINK, PC}
+ * @consumer_fn:	Callback invoked for each frame unwound
+ * 			Returns 0 to continue unwinding, -1 to stop
+ * @arg:		Arg to callback
+ *
+ * Returns the address of first function in stack
+ *
+ * Semantics:
+ *  - synchronous unwinding (e.g. dump_stack): @tsk  NULL, @regs  NULL
+ *  - Asynchronous unwinding of sleeping task: @tsk !NULL, @regs  NULL
+ *  - Asynchronous unwinding of intr/excp etc: @tsk !NULL, @regs !NULL
+ */
+notrace noinline unsigned int arc_unwind_core(
+	struct task_struct *tsk, struct pt_regs *regs,
+	int (*consumer_fn) (unsigned int, void *),
+	void *arg);
+
+#endif /* __ASM_STACKTRACE_H */

arch/arc/kernel/process.c

@@ -192,29 +192,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
 	return 0;
 }
 
-/*
- * API: expected by schedular Code: If thread is sleeping where is that.
- * What is this good for? it will be always the scheduler or ret_from_fork.
- * So we hard code that anyways.
- */
-unsigned long thread_saved_pc(struct task_struct *t)
-{
-	struct pt_regs *regs = task_pt_regs(t);
-	unsigned long blink = 0;
-
-	/*
-	 * If the thread being queried for in not itself calling this, then it
-	 * implies it is not executing, which in turn implies it is sleeping,
-	 * which in turn implies it got switched OUT by the schedular.
-	 * In that case, it's kernel mode blink can reliably retrieved as per
-	 * the picture above (right above pt_regs).
-	 */
-	if (t != current && t->state != TASK_RUNNING)
-		blink = *((unsigned int *)regs - 1);
-
-	return blink;
-}
-
 int elf_check_arch(const struct elf32_hdr *x)
 {
 	unsigned int eflags;

arch/arc/kernel/stacktrace.c

@@ -43,6 +43,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 				   struct pt_regs *regs,
 				   struct unwind_frame_info *frame_info)
 {
+	/*
+	 * synchronous unwinding (e.g. dump_stack)
+	 *  - uses current values of SP and friends
+	 */
 	if (tsk == NULL && regs == NULL) {
 		unsigned long fp, sp, blink, ret;
 		frame_info->task = current;
@@ -61,12 +65,17 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->regs.r63 = ret;
 		frame_info->call_frame = 0;
 	} else if (regs == NULL) {
+		/*
+		 * Asynchronous unwinding of sleeping task
+		 *  - Gets SP etc from task's pt_regs (saved bottom of kernel
+		 *    mode stack of task)
+		 */
 
 		frame_info->task = tsk;
 
-		frame_info->regs.r27 = KSTK_FP(tsk);
-		frame_info->regs.r28 = KSTK_ESP(tsk);
-		frame_info->regs.r31 = KSTK_BLINK(tsk);
+		frame_info->regs.r27 = TSK_K_FP(tsk);
+		frame_info->regs.r28 = TSK_K_ESP(tsk);
+		frame_info->regs.r31 = TSK_K_BLINK(tsk);
 		frame_info->regs.r63 = (unsigned int)__switch_to;
 
 		/* In the prologue of __switch_to, first FP is saved on stack
@@ -83,6 +92,10 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->call_frame = 0;
 
 	} else {
+		/*
+		 * Asynchronous unwinding of intr/exception
+		 *  - Just uses the pt_regs passed
+		 */
 		frame_info->task = tsk;
 
 		frame_info->regs.r27 = regs->fp;
@@ -95,7 +108,7 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 
 #endif
 
-static noinline unsigned int
+notrace noinline unsigned int
 arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 		int (*consumer_fn) (unsigned int, void *), void *arg)
 {

arch/arc/kernel/unaligned.c

@@ -12,6 +12,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/perf_event.h>
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
@@ -253,6 +254,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		}
 	}
 
+	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address);
 	return 0;
 
 fault:

arch/arc/mm/fault.c

@@ -14,6 +14,7 @@
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
+#include <linux/perf_event.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu.h>
 
@@ -139,13 +140,20 @@ good_area:
 			return;
 	}
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
 	if (likely(!(fault & VM_FAULT_ERROR))) {
 		if (flags & FAULT_FLAG_ALLOW_RETRY) {
 			/* To avoid updating stats twice for retry case */
-			if (fault & VM_FAULT_MAJOR)
+			if (fault & VM_FAULT_MAJOR) {
 				tsk->maj_flt++;
-			else
+				perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+					      regs, address);
+			} else {
 				tsk->min_flt++;
+				perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+					      regs, address);
+			}
 
 			if (fault & VM_FAULT_RETRY) {
 				flags &= ~FAULT_FLAG_ALLOW_RETRY;

arch/arm/include/asm/kvm_mmu.h

@@ -207,7 +207,7 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
 
 	bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
 
-	VM_BUG_ON(size & PAGE_MASK);
+	VM_BUG_ON(size & ~PAGE_MASK);
 
 	if (!need_flush && !icache_is_pipt())
 		goto vipt_cache;

arch/arm/kvm/arm.c

@@ -540,7 +540,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		kvm_guest_exit();
-		trace_kvm_exit(*vcpu_pc(vcpu));
+		trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 		/*
 		 * We may have taken a host interrupt in HYP mode (ie
 		 * while executing the guest). This interrupt is still

arch/arm/kvm/trace.h

@@ -25,18 +25,22 @@ TRACE_EVENT(kvm_entry,
 );
 
 TRACE_EVENT(kvm_exit,
-	TP_PROTO(unsigned long vcpu_pc),
-	TP_ARGS(vcpu_pc),
+	TP_PROTO(unsigned int exit_reason, unsigned long vcpu_pc),
+	TP_ARGS(exit_reason, vcpu_pc),
 
 	TP_STRUCT__entry(
+		__field(	unsigned int,	exit_reason	)
 		__field(	unsigned long,	vcpu_pc		)
 	),
 
 	TP_fast_assign(
+		__entry->exit_reason		= exit_reason;
 		__entry->vcpu_pc		= vcpu_pc;
 	),
 
-	TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
+	TP_printk("HSR_EC: 0x%04x, PC: 0x%08lx",
+		  __entry->exit_reason,
+		  __entry->vcpu_pc)
 );
 
 TRACE_EVENT(kvm_guest_fault,

arch/arm/mach-msm/board-halibut.c

@@ -20,6 +20,7 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,15 +47,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= MSM_GPIO_TO_INT(49),
 		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-msm/board-qsd8x50.c

@@ -22,6 +22,7 @@
 #include <linux/usb/msm_hsusb.h>
 #include <linux/err.h>
 #include <linux/clkdev.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -49,15 +50,20 @@ static struct resource smc91x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.flags = IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name           = "smc91x",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(smc91x_resources),
 	.resource       = smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static int __init msm_init_smc91x(void)

arch/arm/mach-pxa/idp.c

@@ -81,11 +81,16 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static void idp_backlight_power(int on)

arch/arm/mach-pxa/lpd270.c

@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -189,15 +190,20 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= LPD270_ETHERNET_IRQ,
 		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+struct smc91x_platdata smc91x_platdata = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT;
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev.platform_data = &smc91x_platdata,
 };
 
 static struct resource lpd270_flash_resources[] = {