Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (39 commits)
  USB: at91-ohci, handle extra at91sam9261 ahb clock
  USB: another id for cp2101 driver
  USB: ueagle-atm.c needs sched.h
  USB: at91_udc, shrink runtime footprint
  usbnet: add missing Kconfig for KC2190 cables
  usbnet: init fault (oops) cleanup, whitespace fixes
  usbnet: recognize SiteCom CN-124
  usb: Remove Airprime device from option.c
  USB: change __init to __devinit for isp116x_probe
  USB: ps3: don't call ps3_system_bus_driver_register on other platforms
  USB: hid-core.c: Removes GTCO CalComp Interwrite IPanel PIDs from blacklist
  USB: kernel-doc fixes
  USB: quirky device for cdc-acm
  USB: cdc-acm: fix incorrect throtteling, make set_control optional
  USB: unconfigure devices which have config 0
  USB: make usb_iso_packet_descriptor.status signed
  USB: fix g_serial small error
  USB: use __u32 rather than u32 in userspace ioctls in usbdevice_fs.h
  USB Storage: US_FL_IGNORE_RESIDUE needed for Aiptek MP3 Player
  USB: Fix misspelled "USBNET_MII" kernel config option.
  ...

drivers/scsi/sd.c

@@ -1269,9 +1269,18 @@ repeat:
 
 	/* Some devices return the total number of sectors, not the
 	 * highest sector number.  Make the necessary adjustment. */
-	if (sdp->fix_capacity)
+	if (sdp->fix_capacity) {
 		--sdkp->capacity;
 
+	/* Some devices have version which report the correct sizes
+	 * and others which do not. We guess size according to a heuristic
+	 * and err on the side of lowering the capacity. */
+	} else {
+		if (sdp->guess_capacity)
+			if (sdkp->capacity & 0x01) /* odd sizes are odd */
+				--sdkp->capacity;
+	}
+
 got_data:
 	if (sector_size == 0) {
 		sector_size = 512;

drivers/usb/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL)	+= serial/
 obj-$(CONFIG_USB_ADUTUX)	+= misc/
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= misc/
 obj-$(CONFIG_USB_AUERSWALD)	+= misc/
+obj-$(CONFIG_USB_BERRY_CHARGE)	+= misc/
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
 obj-$(CONFIG_USB_CYTHERM)	+= misc/
 obj-$(CONFIG_USB_EMI26)		+= misc/

drivers/usb/atm/ueagle-atm.c

@@ -61,6 +61,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/ctype.h>
+#include <linux/sched.h>
 #include <linux/kthread.h>
 #include <linux/version.h>
 #include <linux/mutex.h>

drivers/usb/class/cdc-acm.c

@@ -326,10 +326,16 @@ static void acm_rx_tasklet(unsigned long _acm)
 	struct tty_struct *tty = acm->tty;
 	struct acm_ru *rcv;
 	unsigned long flags;
-	int i = 0;
+	unsigned char throttled;
 	dbg("Entering acm_rx_tasklet");
 
-	if (!ACM_READY(acm) || acm->throttle)
+	if (!ACM_READY(acm))
+		return;
+
+	spin_lock(&acm->throttle_lock);
+	throttled = acm->throttle;
+	spin_unlock(&acm->throttle_lock);
+	if (throttled)
 		return;
 
 next_buffer:
@@ -346,22 +352,20 @@ next_buffer:
 	dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
 
 	tty_buffer_request_room(tty, buf->size);
-	if (!acm->throttle)
+	spin_lock(&acm->throttle_lock);
+	throttled = acm->throttle;
+	spin_unlock(&acm->throttle_lock);
+	if (!throttled)
 		tty_insert_flip_string(tty, buf->base, buf->size);
 	tty_flip_buffer_push(tty);
 
-	spin_lock(&acm->throttle_lock);
-	if (acm->throttle) {
-		dbg("Throtteling noticed");
-		memmove(buf->base, buf->base + i, buf->size - i);
-		buf->size -= i;
-		spin_unlock(&acm->throttle_lock);
+	if (throttled) {
+		dbg("Throttling noticed");
 		spin_lock_irqsave(&acm->read_lock, flags);
 		list_add(&buf->list, &acm->filled_read_bufs);
 		spin_unlock_irqrestore(&acm->read_lock, flags);
 		return;
 	}
-	spin_unlock(&acm->throttle_lock);
 
 	spin_lock_irqsave(&acm->read_lock, flags);
 	list_add(&buf->list, &acm->spare_read_bufs);
@@ -467,7 +471,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		goto bail_out;
 	}
 
-	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS))
+	if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
+	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
 		goto full_bailout;
 
 	INIT_LIST_HEAD(&acm->spare_read_urbs);
@@ -480,6 +485,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 		list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
 	}
 
+	acm->throttle = 0;
+
 	tasklet_schedule(&acm->urb_task);
 
 done:
@@ -1092,6 +1099,10 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
 	.driver_info = SINGLE_RX_URB, /* firmware bug */
 	},
+	{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_V25TER) },

drivers/usb/core/devices.c

@@ -604,10 +604,6 @@ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct
 	lock_kernel();
 	if (!st) {
 		st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
-		if (!st) {
-			unlock_kernel();
-			return POLLIN;
-		}
 
 		/* we may have dropped BKL - need to check for having lost the race */
 		if (file->private_data) {
@@ -615,6 +611,11 @@ static unsigned int usb_device_poll(struct file *file, struct poll_table_struct
 			st = file->private_data;
 			goto lost_race;
 		}
+		/* we haven't lost - check for allocation failure now */
+		if (!st) {
+			unlock_kernel();
+			return POLLIN;
+		}
 
 		/*
 		 * need to prevent the module from being unloaded, since

drivers/usb/core/devio.c

@@ -857,11 +857,11 @@ static int proc_setintf(struct dev_state *ps, void __user *arg)
 
 static int proc_setconfig(struct dev_state *ps, void __user *arg)
 {
-	unsigned int u;
+	int u;
 	int status = 0;
  	struct usb_host_config *actconfig;
 
-	if (get_user(u, (unsigned int __user *)arg))
+	if (get_user(u, (int __user *)arg))
 		return -EFAULT;
 
  	actconfig = ps->dev->actconfig;

drivers/usb/core/driver.c

@@ -743,6 +743,7 @@ EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
  * usb_register_driver - register a USB interface driver
  * @new_driver: USB operations for the interface driver
  * @owner: module owner of this driver.
+ * @mod_name: module name string
  *
  * Registers a USB interface driver with the USB core.  The list of
  * unattached interfaces will be rescanned whenever a new driver is

drivers/usb/core/endpoint.c

@@ -229,7 +229,7 @@ static int init_endpoint_class(void)
 	kref_init(&ep_class->kref);
 	ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
 	if (IS_ERR(ep_class->class)) {
-		result = IS_ERR(ep_class->class);
+		result = PTR_ERR(ep_class->class);
 		goto class_create_error;
 	}
 

drivers/usb/core/generic.c

@@ -184,7 +184,7 @@ static void generic_disconnect(struct usb_device *udev)
 	/* if this is only an unbind, not a physical disconnect, then
 	 * unconfigure the device */
 	if (udev->actconfig)
-		usb_set_configuration(udev, 0);
+		usb_set_configuration(udev, -1);
 
 	usb_remove_sysfs_dev_files(udev);
 }

drivers/usb/core/hub.c

@@ -44,6 +44,7 @@ struct usb_hub {
 		struct usb_hub_status	hub;
 		struct usb_port_status	port;
 	}			*status;	/* buffer for status reports */
+	struct mutex		status_mutex;	/* for the status buffer */
 
 	int			error;		/* last reported error */
 	int			nerrors;	/* track consecutive errors */
@@ -535,6 +536,7 @@ static int hub_hub_status(struct usb_hub *hub,
 {
 	int ret;
 
+	mutex_lock(&hub->status_mutex);
 	ret = get_hub_status(hub->hdev, &hub->status->hub);
 	if (ret < 0)
 		dev_err (hub->intfdev,
@@ -544,6 +546,7 @@ static int hub_hub_status(struct usb_hub *hub,
 		*change = le16_to_cpu(hub->status->hub.wHubChange); 
 		ret = 0;
 	}
+	mutex_unlock(&hub->status_mutex);
 	return ret;
 }
 
@@ -617,6 +620,7 @@ static int hub_configure(struct usb_hub *hub,
 		ret = -ENOMEM;
 		goto fail;
 	}
+	mutex_init(&hub->status_mutex);
 
 	hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
 	if (!hub->descriptor) {
@@ -1396,6 +1400,7 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 {
 	int ret;
 
+	mutex_lock(&hub->status_mutex);
 	ret = get_port_status(hub->hdev, port1, &hub->status->port);
 	if (ret < 4) {
 		dev_err (hub->intfdev,
@@ -1407,6 +1412,7 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 		*change = le16_to_cpu(hub->status->port.wPortChange); 
 		ret = 0;
 	}
+	mutex_unlock(&hub->status_mutex);
 	return ret;
 }
 
@@ -1904,6 +1910,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	struct usb_hub		*hub = usb_get_intfdata (intf);
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
+	int			status = 0;
 
 	/* fail if children aren't already suspended */
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -1927,24 +1934,18 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 
 	dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
 
-	/* "global suspend" of the downstream HC-to-USB interface */
-	if (!hdev->parent) {
-		struct usb_bus	*bus = hdev->bus;
-		if (bus) {
-			int	status = hcd_bus_suspend (bus);
-
-			if (status != 0) {
-				dev_dbg(&hdev->dev, "'global' suspend %d\n",
-					status);
-				return status;
-			}
-		} else
-			return -EOPNOTSUPP;
-	}
-
 	/* stop khubd and related activity */
 	hub_quiesce(hub);
-	return 0;
+
+	/* "global suspend" of the downstream HC-to-USB interface */
+	if (!hdev->parent) {
+		status = hcd_bus_suspend(hdev->bus);
+		if (status != 0) {
+			dev_dbg(&hdev->dev, "'global' suspend %d\n", status);
+			hub_activate(hub);
+		}
+	}
+	return status;
 }
 
 static int hub_resume(struct usb_interface *intf)

drivers/usb/core/message.c

@@ -1316,6 +1316,14 @@ static void release_interface(struct device *dev)
  * use this kind of configurability; many devices only have one
  * configuration.
  *
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured.  However some devices erroneously use 0 as one of their
+ * configuration values.  To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
  * USB device configurations may affect Linux interoperability,
  * power consumption and the functionality available.  For example,
  * the default configuration is limited to using 100mA of bus power,
@@ -1347,10 +1355,15 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	struct usb_interface **new_interfaces = NULL;
 	int n, nintf;
 
-	for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
-		if (dev->config[i].desc.bConfigurationValue == configuration) {
-			cp = &dev->config[i];
-			break;
+	if (configuration == -1)
+		configuration = 0;
+	else {
+		for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+			if (dev->config[i].desc.bConfigurationValue ==
+					configuration) {
+				cp = &dev->config[i];
+				break;
+			}
 		}
 	}
 	if ((!cp && configuration != 0))
@@ -1359,6 +1372,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 	/* The USB spec says configuration 0 means unconfigured.
 	 * But if a device includes a configuration numbered 0,
 	 * we will accept it as a correctly configured state.
+	 * Use -1 if you really want to unconfigure the device.
 	 */
 	if (cp && configuration == 0)
 		dev_warn(&dev->dev, "config 0 descriptor??\n");

drivers/usb/core/otg_whitelist.h

@@ -31,7 +31,7 @@ static struct usb_device_id whitelist_table [] = {
 { USB_DEVICE_INFO(7, 1, 3) },
 #endif
 
-#ifdef	CONFIG_USB_CDCETHER
+#ifdef	CONFIG_USB_NET_CDCETHER
 /* Linux-USB CDC Ethernet gadget */
 { USB_DEVICE(0x0525, 0xa4a1), },
 /* Linux-USB CDC Ethernet + RNDIS gadget */

drivers/usb/core/sysfs.c

@@ -63,7 +63,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
 	struct usb_device	*udev = to_usb_device(dev);
 	int			config, value;
 
-	if (sscanf(buf, "%u", &config) != 1 || config > 255)
+	if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255)
 		return -EINVAL;
 	usb_lock_device(udev);
 	value = usb_set_configuration(udev, config);

drivers/usb/gadget/at91_udc.c

@@ -784,7 +784,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value)
 	return status;
 }
 
-static struct usb_ep_ops at91_ep_ops = {
+static const struct usb_ep_ops at91_ep_ops = {
 	.enable		= at91_ep_enable,
 	.disable	= at91_ep_disable,
 	.alloc_request	= at91_ep_alloc_request,
@@ -1651,7 +1651,7 @@ static void at91udc_shutdown(struct platform_device *dev)
 	pullup(platform_get_drvdata(dev), 0);
 }
 
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int __init at91udc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct at91_udc	*udc;
@@ -1762,7 +1762,7 @@ fail0:
 	return retval;
 }
 
-static int __devexit at91udc_remove(struct platform_device *pdev)
+static int __exit at91udc_remove(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
 	struct resource *res;
@@ -1836,8 +1836,7 @@ static int at91udc_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver at91_udc = {
-	.probe		= at91udc_probe,
-	.remove		= __devexit_p(at91udc_remove),
+	.remove		= __exit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
 	.suspend	= at91udc_suspend,
 	.resume		= at91udc_resume,
@@ -1847,13 +1846,13 @@ static struct platform_driver at91_udc = {
 	},
 };
 
-static int __devinit udc_init_module(void)
+static int __init udc_init_module(void)
 {
-	return platform_driver_register(&at91_udc);
+	return platform_driver_probe(&at91_udc, at91udc_probe);
 }
 module_init(udc_init_module);
 
-static void __devexit udc_exit_module(void)
+static void __exit udc_exit_module(void)
 {
 	platform_driver_unregister(&at91_udc);
 }

drivers/usb/gadget/serial.c

@@ -1699,6 +1699,7 @@ static int gs_setup_class(struct usb_gadget *gadget,
 			memcpy(&port->port_line_coding, req->buf, ret);
 			spin_unlock(&port->port_lock);
 		}
+		ret = 0;
 		break;
 
 	case USB_CDC_REQ_GET_LINE_CODING:

drivers/usb/host/ehci-hcd.c

@@ -42,6 +42,9 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
 
 
 /*-------------------------------------------------------------------------*/
@@ -299,6 +302,19 @@ static void ehci_watchdog (unsigned long param)
 	spin_unlock_irqrestore (&ehci->lock, flags);
 }
 
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+	int	port = HCS_N_PORTS(ehci->hcs_params);
+
+	while (port--)
+		ehci_writel(ehci, PORT_RWC_BITS,
+				&ehci->regs->port_status[port]);
+}
+
 /* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
  * This forcibly disables dma and IRQs, helping kexec and other cases
  * where the next system software may expect clean state.
@@ -310,9 +326,13 @@ ehci_shutdown (struct usb_hcd *hcd)
 
 	ehci = hcd_to_ehci (hcd);
 	(void) ehci_halt (ehci);
+	ehci_turn_off_all_ports(ehci);
 
 	/* make BIOS/etc use companion controller during reboot */
 	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	/* unblock posted writes */
+	ehci_readl(ehci, &ehci->regs->configured_flag);
 }
 
 static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
@@ -951,15 +971,18 @@ static int __init ehci_hcd_init(void)
 #endif
 
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
-	if (retval < 0) {
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		retval = ps3_system_bus_driver_register(
+				&PS3_SYSTEM_BUS_DRIVER);
+		if (retval < 0) {
 #ifdef PLATFORM_DRIVER
-		platform_driver_unregister(&PLATFORM_DRIVER);
+			platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
 #ifdef PCI_DRIVER
-		pci_unregister_driver(&PCI_DRIVER);
+			pci_unregister_driver(&PCI_DRIVER);
 #endif
-		return retval;
+			return retval;
+		}
 	}
 #endif
 
@@ -976,7 +999,8 @@ static void __exit ehci_hcd_cleanup(void)
 	pci_unregister_driver(&PCI_DRIVER);
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
 }
 module_exit(ehci_hcd_cleanup);

drivers/usb/host/ehci-hub.c

@@ -36,6 +36,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	int			port;
 	int			mask;
 
+	ehci_dbg(ehci, "suspend root hub\n");
+
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
 

drivers/usb/host/isp116x-hcd.c

@@ -1577,7 +1577,7 @@ static int isp116x_remove(struct platform_device *pdev)
 
 #define resource_len(r) (((r)->end - (r)->start) + 1)
 
-static int __init isp116x_probe(struct platform_device *pdev)
+static int __devinit isp116x_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp116x *isp116x;

drivers/usb/host/ohci-at91.c

@@ -18,19 +18,38 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifndef CONFIG_ARCH_AT91
 #error "CONFIG_ARCH_AT91 must be defined."
 #endif
 
-/* interface and function clocks */
-static struct clk *iclk, *fclk;
+/* interface and function clocks; sometimes also an AHB clock */
+static struct clk *iclk, *fclk, *hclk;
 static int clocked;
 
 extern int usb_disabled(void);
 
 /*-------------------------------------------------------------------------*/
 
+static void at91_start_clock(void)
+{
+	if (cpu_is_at91sam9261())
+		clk_enable(hclk);
+	clk_enable(iclk);
+	clk_enable(fclk);
+	clocked = 1;
+}
+
+static void at91_stop_clock(void)
+{
+	clk_disable(fclk);
+	clk_disable(iclk);
+	if (cpu_is_at91sam9261())
+		clk_disable(hclk);
+	clocked = 0;
+}
+
 static void at91_start_hc(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -41,9 +60,7 @@ static void at91_start_hc(struct platform_device *pdev)
 	/*
 	 * Start the USB clocks.
 	 */
-	clk_enable(iclk);
-	clk_enable(fclk);
-	clocked = 1;
+	at91_start_clock();
 
 	/*
 	 * The USB host controller must remain in reset.
@@ -66,9 +83,7 @@ static void at91_stop_hc(struct platform_device *pdev)
 	/*
 	 * Stop the USB clocks.
 	 */
-	clk_disable(fclk);
-	clk_disable(iclk);
-	clocked = 0;
+	at91_stop_clock();
 }
 
 
@@ -126,6 +141,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
+	if (cpu_is_at91sam9261())
+		hclk = clk_get(&pdev->dev, "hck0");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -137,6 +154,8 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 
@@ -171,9 +190,11 @@ static int usb_hcd_at91_remove(struct usb_hcd *hcd,
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
+	if (cpu_is_at91sam9261())
+		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
-	fclk = iclk = NULL;
+	fclk = iclk = hclk = NULL;
 
 	dev_set_drvdata(&pdev->dev, NULL);
 	return 0;
@@ -280,9 +301,7 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 	 */
 	if (at91_suspend_entering_slow_clock()) {
 		ohci_usb_reset (ohci);
-		clk_disable(fclk);
-		clk_disable(iclk);
-		clocked = 0;
+		at91_stop_clock();
 	}
 
 	return 0;
@@ -295,11 +314,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(hcd->irq);
 
-	if (!clocked) {
-		clk_enable(iclk);
-		clk_enable(fclk);
-		clocked = 1;
-	}
+	if (!clocked)
+		at91_start_clock();
 
 	return 0;
 }

drivers/usb/host/ohci-hcd.c

@@ -42,6 +42,9 @@
 #include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
 
 #include "../core/hcd.h"
 
@@ -944,9 +947,12 @@ static int __init ohci_hcd_mod_init(void)
 		sizeof (struct ed), sizeof (struct td));
 
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
-	if (retval < 0)
-		goto error_ps3;
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+		retval = ps3_system_bus_driver_register(
+				&PS3_SYSTEM_BUS_DRIVER);
+		if (retval < 0)
+			goto error_ps3;
+	}
 #endif
 
 #ifdef PLATFORM_DRIVER
@@ -992,7 +998,8 @@ static int __init ohci_hcd_mod_init(void)
  error_platform:
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
  error_ps3:
 #endif
 	return retval;
@@ -1014,7 +1021,8 @@ static void __exit ohci_hcd_mod_exit(void)
 	platform_driver_unregister(&PLATFORM_DRIVER);
 #endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
-	ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+	if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+		ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
 #endif
 }
 module_exit(ohci_hcd_mod_exit);