Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -10,12 +10,13 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
@@ -23,6 +24,9 @@ Optional subnode-properties:
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 

Documentation/devicetree/bindings/input/stmpe-keypad.txt

@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/arm/boot/dts/armada-370-db.dts

@@ -203,27 +203,3 @@
 		compatible = "linux,spdif-dir";
 	};
 };
-
-&pinctrl {
-	/*
-	 * These pins might be muxed as I2S by
-	 * the bootloader, but it conflicts
-	 * with the real I2S pins that are
-	 * muxed using i2s_pins. We must mux
-	 * those pins to a function other than
-	 * I2S.
-	 */
-	pinctrl-0 = <&hog_pins1 &hog_pins2>;
-	pinctrl-names = "default";
-
-	hog_pins1: hog-pins1 {
-		marvell,pins = "mpp6",  "mpp8", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	hog_pins2: hog-pins2 {
-		marvell,pins = "mpp5", "mpp7", "mpp9";
-		marvell,function = "gpo";
-	};
-};

arch/arm/configs/multi_v7_defconfig

@@ -338,6 +338,7 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y

arch/arm/kernel/setup.c

@@ -1046,6 +1046,15 @@ static int c_show(struct seq_file *m, void *v)
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
+#if defined(CONFIG_SMP)
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
+			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
+#else
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000/HZ),
+			   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
 		/* dump out the processor features */
 		seq_puts(m, "Features\t: ");
 

arch/arm/kernel/smp.c

@@ -387,6 +387,18 @@ asmlinkage void secondary_start_kernel(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
+	int cpu;
+	unsigned long bogosum = 0;
+
+	for_each_online_cpu(cpu)
+		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+
 	hyp_mode_check();
 }
 

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			318 /* length of syscall table */
+#define NR_syscalls			319 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -331,5 +331,6 @@
 #define __NR_getrandom			1339
 #define __NR_memfd_create		1340
 #define __NR_bpf			1341
+#define __NR_execveat			1342
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1779,6 +1779,7 @@ sys_call_table:
 	data8 sys_getrandom
 	data8 sys_memfd_create			// 1340
 	data8 sys_bpf
+	data8 sys_execveat
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/nios2/kernel/cpuinfo.c

@@ -72,6 +72,7 @@ void __init setup_cpuinfo(void)
 	cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
 	cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
 	cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+	cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
 
 	if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
 		err_cpu("DIV");

arch/nios2/kernel/entry.S

@@ -365,30 +365,14 @@ ENTRY(ret_from_interrupt)
 	GET_THREAD_INFO	r1
 	ldw	r4, TI_PREEMPT_COUNT(r1)
 	bne	r4, r0, restore_all
-
-need_resched:
 	ldw	r4, TI_FLAGS(r1)		/* ? Need resched set */
 	BTBZ	r10, r4, TIF_NEED_RESCHED, restore_all
 	ldw	r4, PT_ESTATUS(sp)	/* ? Interrupts off */
 	andi	r10, r4, ESTATUS_EPIE
 	beq	r10, r0, restore_all
-	movia	r4, PREEMPT_ACTIVE
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* enable intrs again */
-	ori	r10, r10 ,STATUS_PIE
-	wrctl	status, r10
-	PUSH	r1
-	call	schedule
-	POP	r1
-	mov	r4, r0
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* disable intrs */
-	andi	r10, r10, %lo(~STATUS_PIE)
-	wrctl	status, r10
-	br	need_resched
-#else
-	br	restore_all
+	call	preempt_schedule_irq
 #endif
+	br	restore_all
 
 /***********************************************************************
  * A few syscall wrappers

arch/powerpc/include/asm/kexec.h

@@ -86,6 +86,11 @@ extern int overlaps_crashkernel(unsigned long start, unsigned long size);
 extern void reserve_crashkernel(void);
 extern void machine_kexec_mask_interrupts(void);
 
+static inline bool kdump_in_progress(void)
+{
+	return crashing_cpu >= 0;
+}
+
 #else /* !CONFIG_KEXEC */
 static inline void crash_kexec_secondary(struct pt_regs *regs) { }
 
@@ -106,6 +111,11 @@ static inline int crash_shutdown_unregister(crash_shutdown_t handler)
 	return 0;
 }
 
+static inline bool kdump_in_progress(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_KEXEC */
 #endif /* ! __ASSEMBLY__ */
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/systbl.h

@@ -366,3 +366,4 @@ SYSCALL_SPU(seccomp)
 SYSCALL_SPU(getrandom)
 SYSCALL_SPU(memfd_create)
 SYSCALL_SPU(bpf)
+COMPAT_SYS(execveat)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		362
+#define __NR_syscalls		363
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/powerpc/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_getrandom		359
 #define __NR_memfd_create	360
 #define __NR_bpf		361
+#define __NR_execveat		362
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/machine_kexec_64.c

@@ -330,7 +330,7 @@ void default_machine_kexec(struct kimage *image)
         * using debugger IPI.
         */
 
-	if (crashing_cpu == -1)
+	if (!kdump_in_progress())
 		kexec_prepare_cpus();
 
 	pr_debug("kexec: Starting switchover sequence.\n");

arch/powerpc/kernel/smp.c

@@ -700,6 +700,7 @@ void start_secondary(void *unused)
 	smp_store_cpu_info(cpu);
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
+	cpu_callin_map[cpu] = 1;
 
 	if (smp_ops->setup_cpu)
 		smp_ops->setup_cpu(cpu);
@@ -738,14 +739,6 @@ void start_secondary(void *unused)
 	notify_cpu_starting(cpu);
 	set_cpu_online(cpu, true);
 
-	/*
-	 * CPU must be marked active and online before we signal back to the
-	 * master, because the scheduler needs to see the cpu_online and
-	 * cpu_active bits set.
-	 */
-	smp_wmb();
-	cpu_callin_map[cpu] = 1;
-
 	local_irq_enable();
 
 	cpu_startup_entry(CPUHP_ONLINE);

arch/powerpc/platforms/pseries/lpar.c

@@ -43,6 +43,7 @@
 #include <asm/trace.h>
 #include <asm/firmware.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
 #include <asm/fadump.h>
 
 #include "pseries.h"
@@ -267,8 +268,13 @@ static void pSeries_lpar_hptab_clear(void)
 		 * out to the user, but at least this will stop us from
 		 * continuing on further and creating an even more
 		 * difficult to debug situation.
+		 *
+		 * There is a known problem when kdump'ing, if cpus are offline
+		 * the above call will fail. Rather than panicking again, keep
+		 * going and hope the kdump kernel is also little endian, which
+		 * it usually is.
 		 */
-		if (rc)
+		if (rc && !kdump_in_progress())
 			panic("Could not enable big endian exceptions");
 	}
 #endif

arch/um/Kconfig.common

@@ -3,6 +3,7 @@ config UML
 	default y
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_UID16
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO