Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren: Move some of the OMAP2+ CM and System Control Module direct register accesses into CM- and System Control Module-specific "drivers" underneath arch/arm/mach-omap2/. This is a prerequisite for moving this code out of arch/arm/mach-omap2/ into drivers/. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/ * tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: control: add API for setting IVA bootmode ARM: OMAP3: CM/control: move CM scratchpad save to CM driver ARM: OMAP3: McBSP: do not access CM register directly ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock ARM: OMAP2: CM/PM: remove direct register accesses outside CM code + Linux 3.12-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2026-05-01 15:00:59 -07:00 · 2013-10-28 14:39:03 -07:00
parent 02673f94d0 54b89756a1
commit 43d93947a5
539 changed files with 5297 additions and 3069 deletions
@@ -2808,8 +2808,7 @@ S: Ottawa, Ontario
 S: Canada K2P 0X8

 N: Mikael Pettersson
-E: mikpe@it.uu.se
-W: http://user.it.uu.se/~mikpe/linux/
+E: mikpelinux@gmail.com
 D: Miscellaneous fixes

 N: Reed H. Petty
@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt
@@ -1,9 +1,9 @@
-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================

-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.

@@ -1,11 +1,11 @@
-* Samsung Exynos specific extensions to the Synopsis Designware Mobile
+* Samsung Exynos specific extensions to the Synopsys Designware Mobile
  Storage Host Controller

-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsis dw mshc controller properties described
-by synopsis-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsis Designware Mobile Storage Host Controller.
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.

 Required Properties:

@@ -1,11 +1,11 @@
-* Rockchip specific extensions to the Synopsis Designware Mobile
+* Rockchip specific extensions to the Synopsys Designware Mobile
  Storage Host Controller

-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsis dw mshc controller properties described
-by synopsis-dw-mshc.txt and the properties used by the Rockchip specific
-extensions to the Synopsis Designware Mobile Storage Host Controller.
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Rockchip specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.

 Required Properties:

@@ -1,14 +1,14 @@
-* Synopsis Designware Mobile Storage Host Controller
+* Synopsys Designware Mobile Storage Host Controller

-The Synopsis designware mobile storage host controller is used to interface
+The Synopsys designware mobile storage host controller is used to interface
 a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
 differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsis Designware Mobile Storage Host Controller.
+properties used by the Synopsys Designware Mobile Storage Host Controller.

 Required Properties:

 * compatible: should be
-	- snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
+	- snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
 * #address-cells: should be 1.
 * #size-cells: should be 0.

@@ -86,6 +86,7 @@ General Properties:

 Clock Properties:

+  - fsl,cksel        Timer reference clock source.
  - fsl,tclk-period  Timer reference clock period in nanoseconds.
  - fsl,tmr-prsc     Prescaler, divides the output clock.
  - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
  clock. You must choose these carefully for the clock to work right.
  Here is how to figure good values:

-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
  tclk_period  = desired clock period       nanoseconds
  NominalFreq  = 1000 / tclk_period         MHz
  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,20 @@ Clock Properties:
  Pulse Per Second (PPS) signal, since this will be offered to the PPS
  subsystem to synchronize the Linux clock.

+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:

 	ptp_clock@24E00 {
@@ -121,6 +136,7 @@ Example:
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;
@@ -1,4 +1,4 @@
-* Synopsis Designware PCIe interface
+* Synopsys Designware PCIe interface

 Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the
@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.

+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.
@@ -3485,6 +3489,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the unplug protocol
 			never -- do not unplug even if version check succeeds

+	xen_nopvspin	[X86,XEN]
+			Disables the ticketlock slowpath using Xen PV
+			optimizations.
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
@@ -296,6 +296,12 @@ Cirrus Logic CS4206/4207
  imac27	IMac 27 Inch
  auto		BIOS setup (default)

+Cirrus Logic CS4208
+===================
+  mba6		MacBook Air 6,1 and 6,2
+  gpio0		Enable GPIO 0 amp
+  auto		BIOS setup (default)
+
 VIA VT17xx/VT18xx/VT20xx
 ========================
  auto		BIOS setup (default)
@@ -828,15 +828,21 @@ S:	Maintained
 F:	arch/arm/mach-gemini/

 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua.song@csr.com>
+M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/clk/clk-prima2.c
+F:	drivers/clocksource/timer-prima2.c
+F:	drivers/clocksource/timer-marco.c
 F:	drivers/dma/sirf-dma.c
 F:	drivers/i2c/busses/i2c-sirf.c
+F:	drivers/input/misc/sirfsoc-onkey.c
+F:	drivers/irqchip/irq-sirfsoc.c
 F:	drivers/mmc/host/sdhci-sirf.c
 F:	drivers/pinctrl/sirf/
+F:	drivers/rtc/rtc-sirfsoc.c
 F:	drivers/spi/spi-sirf.c

 ARM/EBSA110 MACHINE SUPPORT
@@ -1813,7 +1819,8 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/

 BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
-M:	Christian Daudt <csd@broadcom.com>
+M:	Christian Daudt <bcm@fixthebug.org>
+L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://git.github.com/broadcom/bcm11351
 S:	Maintained
 F:	arch/arm/mach-bcm/
@@ -2640,6 +2647,18 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 F:	include/uapi/linux/dm-*.h

+DIGI NEO AND CLASSIC PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgnc/
+
+DIGI EPCA PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgap/
+
 DIOLAN U2C-12 I2C DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
@@ -4458,6 +4477,13 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/ioc3_serial.c

+IOMMU DRIVERS
+M:	Joerg Roedel <joro@8bytes.org>
+L:	iommu@lists.linux-foundation.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+S:	Maintained
+F:	drivers/iommu/
+
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
@@ -6596,7 +6622,7 @@ S:	Obsolete
 F:	drivers/net/wireless/prism54/

 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-M:	Mikael Pettersson <mikpe@it.uu.se>
+M:	Mikael Pettersson <mikpelinux@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/sata_promise.*
@@ -7259,9 +7285,9 @@ F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h

 SCORE ARCHITECTURE
-M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Chen Liqin <liqin.linux@gmail.com>
 M:	Lennox Wu <lennox.wu@gmail.com>
-W:	http://www.sunplusct.com
+W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/

@@ -8725,9 +8751,8 @@ F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/

 USB/IP DRIVERS
-M:	Matt Mooney <mfm@muteddisk.com>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/staging/usbip/

 USB ISP116X DRIVER
@@ -9367,6 +9392,7 @@ F:	arch/arm64/include/asm/xen/

 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = One Giant Leap for Frogkind

 # *DOCUMENTATION*
@@ -286,9 +286,6 @@ config HAVE_PERF_USER_STACK_DUMP
 config HAVE_ARCH_JUMP_LABEL
 	bool

-config HAVE_ARCH_MUTEX_CPU_RELAX
-	bool
-
 config HAVE_RCU_TABLE_FREE
 	bool

@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)

 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }

@@ -43,7 +43,7 @@
 * Because it essentially checks if buffer end is within limit and @len is
 * non-ngeative, which implies that buffer start will be within limit too.
 *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
 * compile time constant, causing first sub-expression to be compile time
 * subsumed.
 *
@@ -53,7 +53,7 @@
 *
 */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))

@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();

 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;

-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;

 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;

+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);

@@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 	if (!sf)
 		return 1;

+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
 	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}

-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;
@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);

-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);

 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus
@@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}

 	return 0;
@@ -2185,8 +2185,7 @@ config NEON

 config KERNEL_MODE_NEON
 	bool "Support for NEON in kernel mode"
-	default n
-	depends on NEON
+	depends on NEON && AEABI
 	help
 	  Say Y to include support for NEON in kernel mode.

--- a/Show More
+++ b/Show More