Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...

arch/arm/Kconfig

@@ -197,15 +197,21 @@ config ARM_PATCH_PHYS_VIRT
 	depends on !XIP_KERNEL && MMU
 	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
-	  Patch phys-to-virt translation functions at runtime according to
-	  the position of the kernel in system memory.
+	  Patch phys-to-virt and virt-to-phys translation functions at
+	  boot and module load time according to the position of the
+	  kernel in system memory.
 
-	  This can only be used with non-XIP with MMU kernels where
-	  the base of physical memory is at a 16MB boundary.
+	  This can only be used with non-XIP MMU kernels where the base
+	  of physical memory is at a 16MB boundary, or theoretically 64K
+	  for the MSM machine class.
 
 config ARM_PATCH_PHYS_VIRT_16BIT
 	def_bool y
 	depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+	help
+	  This option extends the physical to virtual translation patching
+	  to allow physical memory down to a theoretical minimum of 64K
+	  boundaries.
 
 source "init/Kconfig"
 
@@ -297,6 +303,7 @@ config ARCH_BCMRING
 	depends on MMU
 	select CPU_V6
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -366,6 +373,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select HAVE_SCHED_CLOCK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -375,21 +383,13 @@ config ARCH_MXS
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	help
 	  Support for Freescale MXS-based family of processors
 
-config ARCH_STMP3XXX
-	bool "Freescale STMP3xxx"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select USB_ARCH_HAS_EHCI
-	help
-	  Support for systems based on the Freescale 3xxx CPUs.
-
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
@@ -457,6 +457,7 @@ config ARCH_IXP2000
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
+	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_CLOCKEVENTS
@@ -468,7 +469,7 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select CPU_V6K
+	select CPU_V7
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
@@ -497,6 +498,7 @@ config ARCH_LOKI
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
@@ -554,23 +556,12 @@ config ARCH_KS8695
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
-config ARCH_NS9XXX
-	bool "NetSilicon NS9xxx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
-	  System.
-
-	  <http://www.digi.com/products/microprocessors/index.jsp>
-
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -592,6 +583,7 @@ config ARCH_NUC93X
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
@@ -617,6 +609,7 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
@@ -667,6 +660,7 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
+	select CLKSRC_MMIO
 	select CPU_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
@@ -803,6 +797,7 @@ config ARCH_SHARK
 
 config ARCH_TCC_926
 	bool "Telechips TCC ARM926-based systems"
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
@@ -813,6 +808,7 @@ config ARCH_TCC_926
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
+	select CLKSRC_MMIO
 	select CPU_ARM926T
 	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
@@ -854,6 +850,7 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
+	select GENERIC_IRQ_CHIP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
@@ -874,6 +871,7 @@ config PLAT_SPEAR
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -951,8 +949,6 @@ source "arch/arm/mach-netx/Kconfig"
 source "arch/arm/mach-nomadik/Kconfig"
 source "arch/arm/plat-nomadik/Kconfig"
 
-source "arch/arm/mach-ns9xxx/Kconfig"
-
 source "arch/arm/mach-nuc93x/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
@@ -1005,8 +1001,6 @@ source "arch/arm/mach-exynos4/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -1033,6 +1027,8 @@ config PLAT_IOP
 
 config PLAT_ORION
 	bool
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
@@ -1043,6 +1039,7 @@ config PLAT_VERSATILE
 
 config ARM_TIMER_SP804
 	bool
+	select CLKSRC_MMIO
 
 source arch/arm/mm/Kconfig
 
@@ -1318,8 +1315,7 @@ menu "Kernel Features"
 source "kernel/time/Kconfig"
 
 config SMP
-	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
@@ -1521,8 +1517,8 @@ config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
-	bool "High Memory Support (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
+	bool "High Memory Support"
+	depends on MMU
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1742,16 +1738,31 @@ config CMDLINE
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
 	help
 	  Always use the default kernel command string, even if the boot
 	  loader passes other arguments to the kernel.
 	  This is useful if you cannot or don't want to change the
 	  command-line options your boot loader passes to the kernel.
-
-	  If unsure, say N.
+endchoice
 
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
@@ -2010,7 +2021,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+	depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y

arch/arm/Makefile

@@ -158,13 +158,11 @@ machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= imx
 machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= imx
-machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
 machine-$(CONFIG_ARCH_OMAP3)		:= omap2
@@ -185,8 +183,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
-machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
@@ -207,7 +203,6 @@ machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik

arch/arm/boot/compressed/Makefile

@@ -98,8 +98,6 @@ endif
 ccflags-y := -fpic -fno-builtin
 asflags-y := -Wa,-march=all
 
-# Provide size of uncompressed kernel to the decompressor via a linker symbol.
-LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
 LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -122,10 +120,23 @@ lib1funcs = $(obj)/lib1funcs.o
 $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
 	$(call cmd,shipped)
 
+# We need to prevent any GOTOFF relocs being used with references
+# to symbols in the .bss section since we cannot relocate them
+# independently from the rest at run time.  This can be achieved by
+# ensuring that no private .bss symbols exist, as global symbols
+# always have a GOT entry which is what we need.
+# The .data section is already discarded by the linker script so no need
+# to bother about it here.
+check_for_bad_syms = \
+bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+[ -z "$$bad_syms" ] || \
+  ( echo "following symbols must have non local/private scope:" >&2; \
+    echo "$$bad_syms" >&2; rm -f $@; false )
+
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
 	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
-	@:
+	@$(check_for_bad_syms)
 
 $(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
 	$(call if_changed,$(suffix_y))

arch/arm/boot/compressed/decompress.c

@@ -44,7 +44,7 @@ extern void error(char *);
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
-void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
-	decompress(input, len, NULL, NULL, output, NULL, error);
+	return decompress(input, len, NULL, NULL, output, NULL, error);
 }

arch/arm/boot/compressed/head.S

@@ -179,7 +179,7 @@ not_angel:
 		bl	cache_on
 
 restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r9, r11, r12}
+		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
 		ldr	sp, [r0, #28]
 
 		/*
@@ -188,6 +188,20 @@ restart:	adr	r0, LC0
 		 */
 		sub	r0, r0, r1		@ calculate the delta offset
 		add	r6, r6, r0		@ _edata
+		add	r10, r10, r0		@ inflated kernel size location
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		ldrb	r9, [r10, #0]
+		ldrb	lr, [r10, #1]
+		orr	r9, r9, lr, lsl #8
+		ldrb	lr, [r10, #2]
+		ldrb	r10, [r10, #3]
+		orr	r9, r9, lr, lsl #16
+		orr	r9, r9, r10, lsl #24
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
@@ -347,10 +361,10 @@ LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
 		.word	_edata			@ r6
-		.word	_image_size		@ r9
+		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	user_stack_end		@ sp
+		.word	.L_user_stack_end	@ sp
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
@@ -459,7 +473,11 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		orr	r1, r1, #3 << 10
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		orrhs	r1, r1, #0x08		@ set cacheable
+#else
 		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
+#endif
 		cmp	r1, r10			@ if virt > end of RAM
 		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
 		str	r1, [r0], #4		@ 1:1 mapping
@@ -484,6 +502,12 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+__arm926ejs_mmu_cache_on:
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		mov	r0, #4			@ put dcache in WT mode
+		mcr	p15, 7, r0, c15, c0, 0
+#endif
+
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
@@ -665,6 +689,12 @@ proc_types:
 		W(b)	__armv4_mpu_cache_off
 		W(b)	__armv4_mpu_cache_flush
 
+		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
+		.word	0xff0ffff0
+		b	__arm926ejs_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv5tej_mmu_cache_flush
+
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
@@ -747,12 +777,6 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
-		.word	0x560f5810		@ Marvell PJ4 ARMv6
-		.word	0xff0ffff0
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv6_mmu_cache_flush
-
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on
@@ -1078,5 +1102,5 @@ reloc_code_end:
 
 		.align
 		.section ".stack", "aw", %nobits
-user_stack:	.space	4096
-user_stack_end:
+.L_user_stack:	.space	4096
+.L_user_stack_end:

arch/arm/boot/compressed/misc.c

@@ -26,8 +26,6 @@ unsigned int __machine_arch_type;
 #include <linux/linkage.h>
 #include <asm/string.h>
 
-#include <asm/unaligned.h>
-
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -139,13 +137,12 @@ void *memcpy(void *__dest, __const void *__src, size_t __n)
 }
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 extern char input_data[];
 extern char input_data_end[];
 
 unsigned char *output_data;
-unsigned long output_ptr;
 
 unsigned long free_mem_ptr;
 unsigned long free_mem_end_ptr;
@@ -170,15 +167,15 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
-unsigned long
+void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
 		int arch_id)
 {
-	unsigned char *tmp;
+	int ret;
 
 	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
@@ -187,12 +184,11 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 
 	arch_decomp_setup();
 
-	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
-	output_ptr = get_unaligned_le32(tmp);
-
 	putstr("Uncompressing Linux...");
-	do_decompress(input_data, input_data_end - input_data,
-			output_data, error);
-	putstr(" done, booting the kernel.\n");
-	return output_ptr;
+	ret = do_decompress(input_data, input_data_end - input_data,
+			    output_data, error);
+	if (ret)
+		error("decompressor returned an error");
+	else
+		putstr(" done, booting the kernel.\n");
 }

arch/arm/common/gic.c

@@ -49,7 +49,7 @@ struct gic_chip_data {
  * Default make them NULL.
  */
 struct irq_chip gic_arch_extn = {
-	.irq_ack	= NULL,
+	.irq_eoi	= NULL,
 	.irq_mask	= NULL,
 	.irq_unmask	= NULL,
 	.irq_retrigger	= NULL,
@@ -84,21 +84,12 @@ static inline unsigned int gic_irq(struct irq_data *d)
 /*
  * Routines to acknowledge, disable and enable interrupts
  */
-static void gic_ack_irq(struct irq_data *d)
-{
-	spin_lock(&irq_controller_lock);
-	if (gic_arch_extn.irq_ack)
-		gic_arch_extn.irq_ack(d);
-	writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
-	spin_unlock(&irq_controller_lock);
-}
-
 static void gic_mask_irq(struct irq_data *d)
 {
 	u32 mask = 1 << (d->irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
 	if (gic_arch_extn.irq_mask)
 		gic_arch_extn.irq_mask(d);
 	spin_unlock(&irq_controller_lock);
@@ -111,10 +102,21 @@ static void gic_unmask_irq(struct irq_data *d)
 	spin_lock(&irq_controller_lock);
 	if (gic_arch_extn.irq_unmask)
 		gic_arch_extn.irq_unmask(d);
-	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
+	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
+static void gic_eoi_irq(struct irq_data *d)
+{
+	if (gic_arch_extn.irq_eoi) {
+		spin_lock(&irq_controller_lock);
+		gic_arch_extn.irq_eoi(d);
+		spin_unlock(&irq_controller_lock);
+	}
+
+	writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
+}
+
 static int gic_set_type(struct irq_data *d, unsigned int type)
 {
 	void __iomem *base = gic_dist_base(d);
@@ -138,7 +140,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	if (gic_arch_extn.irq_set_type)
 		gic_arch_extn.irq_set_type(d, type);
 
-	val = readl(base + GIC_DIST_CONFIG + confoff);
+	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
 	if (type == IRQ_TYPE_LEVEL_HIGH)
 		val &= ~confmask;
 	else if (type == IRQ_TYPE_EDGE_RISING)
@@ -148,15 +150,15 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	 * As recommended by the spec, disable the interrupt before changing
 	 * the configuration
 	 */
-	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
 		enabled = true;
 	}
 
-	writel(val, base + GIC_DIST_CONFIG + confoff);
+	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
 
 	if (enabled)
-		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
 
 	spin_unlock(&irq_controller_lock);
 
@@ -188,8 +190,8 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 
 	spin_lock(&irq_controller_lock);
 	d->node = cpu;
-	val = readl(reg) & ~mask;
-	writel(val | bit, reg);
+	val = readl_relaxed(reg) & ~mask;
+	writel_relaxed(val | bit, reg);
 	spin_unlock(&irq_controller_lock);
 
 	return 0;
@@ -218,11 +220,10 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 	unsigned int cascade_irq, gic_irq;
 	unsigned long status;
 
-	/* primary controller ack'ing */
-	chip->irq_ack(&desc->irq_data);
+	chained_irq_enter(chip, desc);
 
 	spin_lock(&irq_controller_lock);
-	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	status = readl_relaxed(chip_data->cpu_base + GIC_CPU_INTACK);
 	spin_unlock(&irq_controller_lock);
 
 	gic_irq = (status & 0x3ff);
@@ -236,15 +237,14 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 		generic_handle_irq(cascade_irq);
 
  out:
-	/* primary controller unmasking */
-	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
 }
 
 static struct irq_chip gic_chip = {
 	.name			= "GIC",
-	.irq_ack		= gic_ack_irq,
 	.irq_mask		= gic_mask_irq,
 	.irq_unmask		= gic_unmask_irq,
+	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
 	.irq_retrigger		= gic_retrigger,
 #ifdef CONFIG_SMP
@@ -272,13 +272,13 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	writel(0, base + GIC_DIST_CTRL);
+	writel_relaxed(0, base + GIC_DIST_CTRL);
 
 	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
-	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
 	gic_irqs = (gic_irqs + 1) * 32;
 	if (gic_irqs > 1020)
 		gic_irqs = 1020;
@@ -287,26 +287,26 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	 * Set all global interrupts to be level triggered, active low.
 	 */
 	for (i = 32; i < gic_irqs; i += 16)
-		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
+		writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
 
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
-		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
 	 * Set priority on all global interrupts.
 	 */
 	for (i = 32; i < gic_irqs; i += 4)
-		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
 	 * Disable all interrupts.  Leave the PPI and SGIs alone
 	 * as these enables are banked registers.
 	 */
 	for (i = 32; i < gic_irqs; i += 32)
-		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
 	 * Limit number of interrupts registered to the platform maximum
@@ -319,12 +319,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 	 * Setup the Linux IRQ subsystem.
 	 */
 	for (i = irq_start; i < irq_limit; i++) {
-		irq_set_chip_and_handler(i, &gic_chip, handle_level_irq);
+		irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
 		irq_set_chip_data(i, gic);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
 
-	writel(1, base + GIC_DIST_CTRL);
+	writel_relaxed(1, base + GIC_DIST_CTRL);
 }
 
 static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
@@ -337,17 +337,17 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 	 * Deal with the banked PPI and SGI interrupts - disable all
 	 * PPI interrupts, ensure all SGI interrupts are enabled.
 	 */
-	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+	writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
 
 	/*
 	 * Set priority on PPI and SGI interrupts
 	 */
 	for (i = 0; i < 32; i += 4)
-		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
 
-	writel(0xf0, base + GIC_CPU_PRIMASK);
-	writel(1, base + GIC_CPU_CTRL);
+	writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
+	writel_relaxed(1, base + GIC_CPU_CTRL);
 }
 
 void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
@@ -391,7 +391,13 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(*mask);
 
+	/*
+	 * Ensure that stores to Normal memory are visible to the
+	 * other CPUs before issuing the IPI.
+	 */
+	dsb();
+
 	/* this always happens on GIC0 */
-	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
+	writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif

arch/arm/common/sa1111.c

@@ -185,14 +185,6 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
-{
-	unsigned int sz = SZ_1M >> PAGE_SHIFT;
-
-	size[1] = size[0] - sz;
-	size[0] = sz;
-}
-
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels

arch/arm/common/timer-sp.c

@@ -18,53 +18,67 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/clk.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/arm_timer.h>
 
-/*
- * These timers are currently always setup to be clocked at 1MHz.
- */
-#define TIMER_FREQ_KHZ	(1000)
-#define TIMER_RELOAD	(TIMER_FREQ_KHZ * 1000 / HZ)
-
-static void __iomem *clksrc_base;
-
-static cycle_t sp804_read(struct clocksource *cs)
+static long __init sp804_get_clock_rate(const char *name)
 {
-	return ~readl(clksrc_base + TIMER_VALUE);
+	struct clk *clk;
+	long rate;
+	int err;
+
+	clk = clk_get_sys("sp804", name);
+	if (IS_ERR(clk)) {
+		pr_err("sp804: %s clock not found: %d\n", name,
+			(int)PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	err = clk_enable(clk);
+	if (err) {
+		pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+		clk_put(clk);
+		return err;
+	}
+
+	rate = clk_get_rate(clk);
+	if (rate < 0) {
+		pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+		clk_disable(clk);
+		clk_put(clk);
+	}
+
+	return rate;
 }
 
-static struct clocksource clocksource_sp804 = {
-	.name		= "timer3",
-	.rating		= 200,
-	.read		= sp804_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init sp804_clocksource_init(void __iomem *base)
+void __init sp804_clocksource_init(void __iomem *base, const char *name)
 {
-	struct clocksource *cs = &clocksource_sp804;
+	long rate = sp804_get_clock_rate(name);
 
-	clksrc_base = base;
+	if (rate < 0)
+		return;
 
 	/* setup timer 0 as free-running clocksource */
-	writel(0, clksrc_base + TIMER_CTRL);
-	writel(0xffffffff, clksrc_base + TIMER_LOAD);
-	writel(0xffffffff, clksrc_base + TIMER_VALUE);
+	writel(0, base + TIMER_CTRL);
+	writel(0xffffffff, base + TIMER_LOAD);
+	writel(0xffffffff, base + TIMER_VALUE);
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		clksrc_base + TIMER_CTRL);
+		base + TIMER_CTRL);
 
-	clocksource_register_khz(cs, TIMER_FREQ_KHZ);
+	clocksource_mmio_init(base + TIMER_VALUE, name,
+		rate, 200, 32, clocksource_mmio_readl_down);
 }
 
 
 static void __iomem *clkevt_base;
+static unsigned long clkevt_reload;
 
 /*
  * IRQ handler for the timer
@@ -90,7 +104,7 @@ static void sp804_set_mode(enum clock_event_mode mode,
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
 		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
 		break;
 
@@ -120,7 +134,6 @@ static int sp804_set_next_event(unsigned long next,
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.name		= "timer0",
 	.shift		= 32,
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= sp804_set_mode,
@@ -136,17 +149,24 @@ static struct irqaction sp804_timer_irq = {
 	.dev_id		= &sp804_clockevent,
 };
 
-void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
+	const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
+	long rate = sp804_get_clock_rate(name);
+
+	if (rate < 0)
+		return;
 
 	clkevt_base = base;
+	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 
-	evt->irq = timer_irq;
-	evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+	evt->name = name;
+	evt->irq = irq;
+	evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
 	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
 	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
 
-	setup_irq(timer_irq, &sp804_timer_irq);
+	setup_irq(irq, &sp804_timer_irq);
 	clockevents_register_device(evt);
 }

arch/arm/configs/dove_defconfig

@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_AEABI=y
@@ -44,7 +42,6 @@ CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-# CONFIG_MISC_DEVICES is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
@@ -59,12 +56,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -72,12 +69,10 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MV=y
@@ -86,7 +81,6 @@ CONFIG_MV_XOR=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -110,23 +104,19 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y

arch/arm/configs/mx1_defconfig

@@ -15,6 +15,7 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX1=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/arm/configs/mx51_defconfig

@@ -13,7 +13,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y

arch/arm/configs/mxs_defconfig

@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXS=y
+CONFIG_MACH_STMP378X_DEVB=y
+CONFIG_MACH_TX28=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_AEABI=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_DEV=m
+CONFIG_CAN_FLEXCAN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ENC28J60=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_TSC2007=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=m
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MXS=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=m
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FSCACHE=m
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m

arch/arm/configs/ns9xxx_defconfig

@@ -1,56 +0,0 @@
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_CC9P9360DEV=y
-CONFIG_MACH_CC9P9360JS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_MTD=m
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_PHYSMAP=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_GPIO=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
-CONFIG_EXT2_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y

arch/arm/configs/realview-smp_defconfig

@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y

arch/arm/configs/realview_defconfig

@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y

arch/arm/configs/spear310_defconfig

@@ -1,52 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR310=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear320_defconfig

@@ -1,52 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_MACH_SPEAR320=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear3xx_defconfig

@@ -7,6 +7,9 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
+CONFIG_BOARD_SPEAR300_EVB=y
+CONFIG_BOARD_SPEAR310_EVB=y
+CONFIG_BOARD_SPEAR320_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -24,7 +27,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y

arch/arm/configs/spear6xx_defconfig

@@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
+CONFIG_BOARD_SPEAR600_EVB=y
 CONFIG_BINFMT_MISC=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
@@ -22,7 +23,6 @@ CONFIG_MAX_RAW_DEVS=8192
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_EXT2_FS=y