dt/bindings: Remove all references to device_type "ethernet-phy"

The device_type property is deprecated for the flattened device tree and
the value "ethernet-phy" has never been defined as having a useful
meaning. Neither the kernel nor u-boot depend on it. It should never
have appeared in PHY bindings. This patch removes all references to
"ethernet-phy" as a device_type value from the documentation and the
.dts files.

This patch was generated mechanically with the following command and
then verified by looking at the diff.

sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'`

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Documentation/devicetree/bindings/marvell.txt

@@ -159,7 +159,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
    c) Marvell Discovery PHY nodes
 
    Required properties:
-     - device_type : Should be "ethernet-phy"
      - interrupts : <a> where a is the interrupt number for this phy.
      - interrupt-parent : the phandle for the interrupt controller that
        services interrupts for this device.
@@ -167,7 +166,6 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
 
    Example Discovery PHY node:
      ethernet-phy@1 {
-	     device_type = "ethernet-phy";
 	     compatible = "broadcom,bcm5421";
 	     interrupts = <76>;      /* GPP 12 */
 	     interrupt-parent = <&PIC>;

Documentation/devicetree/bindings/net/marvell-orion-net.txt

@@ -61,7 +61,6 @@ or
 mdio-bus {
 	...
 	ethphy: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		...
 	};
 };

Documentation/devicetree/bindings/net/phy.txt

@@ -2,7 +2,6 @@ PHY nodes
 
 Required properties:
 
- - device_type : Should be "ethernet-phy"
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -31,5 +30,4 @@ ethernet-phy@0 {
 	interrupt-parent = <40000>;
 	interrupts = <35 1>;
 	reg = <0>;
-	device_type = "ethernet-phy";
 };

Documentation/devicetree/booting-without-of.txt

@@ -1364,19 +1364,16 @@ Appendix A - Sample SOC node for MPC8540
 				phy0: ethernet-phy@0 {
 					interrupts = <5 1>;
 					reg = <0>;
-					device_type = "ethernet-phy";
 				};
 
 				phy1: ethernet-phy@1 {
 					interrupts = <5 1>;
 					reg = <1>;
-					device_type = "ethernet-phy";
 				};
 
 				phy3: ethernet-phy@3 {
 					interrupts = <7 1>;
 					reg = <3>;
-					device_type = "ethernet-phy";
 				};
 			};
 		};

arch/arm/boot/dts/dove.dtsi

@@ -559,7 +559,6 @@
 				status = "disabled";
 
 				ethphy: ethernet-phy {
-					device-type = "ethernet-phy";
 					/* set phy address in board file */
 				};
 			};

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -94,7 +94,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/kirkwood-db.dtsi

@@ -84,7 +84,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		reg = <8>;
 	};
 };

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -224,7 +224,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		reg = <8>;
 	};
 };

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -95,7 +95,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		compatible = "marvell,88e1116";
 		reg = <0>;
 	};

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -104,12 +104,10 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 
 	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
 		reg = <1>;
 	};
 };

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -176,7 +176,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

@@ -101,13 +101,11 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		compatible = "marvell,88e1121";
 		reg = <0>;
 	};
 
 	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
 		compatible = "marvell,88e1121";
 		reg = <1>;
 	};

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -133,7 +133,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		reg = <8>;
 	};
 };

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -183,7 +183,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@11 {
-		device_type = "ethernet-phy";
 		reg = <11>;
 	};
 };

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -200,7 +200,6 @@
 	status = "okay";
 
 	ethphy1: ethernet-phy@11 {
-		device_type = "ethernet-phy";
 		reg = <11>;
 	};
 };

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -55,7 +55,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -212,12 +212,10 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 
 	ethphy1: ethernet-phy@8 {
-		device_type = "ethernet-phy";
 		reg = <8>;
 	};
 };

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -197,12 +197,10 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@1 {
-		device_type = "ethernet-phy";
 		reg = <1>;
 	};
 
 	ethphy1: ethernet-phy@2 {
-		device_type = "ethernet-phy";
 		reg = <2>;
 	};
 };

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -211,7 +211,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -89,7 +89,6 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy {
-		device_type = "ethernet-phy";
                 /* overwrite reg property in board file */
 	};
 };