apfs/linux-apfs
0
0
Fork 0
mirror of https://github.com/linux-apfs/linux-apfs.git synced 2026-05-01 15:00:59 -07:00
Code Issues Packages Projects Releases Wiki Activity

Documentation/gpu: split up mm, kms and kms-helpers from internals

Browse Source 
Make the documents more manageable.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/be992e56eb8442d6e03b52444df5a42525085718.1466506505.git.jani.nikula@intel.com
This commit is contained in:
Jani Nikula
2016-06-21 14:49:02 +03:00
committed by Daniel Vetter
parent 9b20fa08d3
commit 2fa91d1558
5 changed files with 1379 additions and 1373 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/gpu/drm-internals.rst
+6 -1373
View File
File diff suppressed because it is too large Load Diff
Documentation/gpu/drm-kms-helpers.rst
+260
View File
@@ -0,0 +1,260 @@
=============================
Mode Setting Helper Functions
=============================
The plane, CRTC, encoder and connector functions provided by the drivers
implement the DRM API. They're called by the DRM core and ioctl handlers
to handle device state changes and configuration request. As
implementing those functions often requires logic not specific to
drivers, mid-layer helper functions are available to avoid duplicating
boilerplate code.
The DRM core contains one mid-layer implementation. The mid-layer
provides implementations of several plane, CRTC, encoder and connector
functions (called from the top of the mid-layer) that pre-process
requests and call lower-level functions provided by the driver (at the
bottom of the mid-layer). For instance, the
:c:func:`drm_crtc_helper_set_config()` function can be used to
fill the :c:type:`struct drm_crtc_funcs <drm_crtc_funcs>`
set_config field. When called, it will split the set_config operation
in smaller, simpler operations and call the driver to handle them.
To use the mid-layer, drivers call
:c:func:`drm_crtc_helper_add()`,
:c:func:`drm_encoder_helper_add()` and
:c:func:`drm_connector_helper_add()` functions to install their
mid-layer bottom operations handlers, and fill the :c:type:`struct
drm_crtc_funcs <drm_crtc_funcs>`, :c:type:`struct
drm_encoder_funcs <drm_encoder_funcs>` and :c:type:`struct
drm_connector_funcs <drm_connector_funcs>` structures with
pointers to the mid-layer top API functions. Installing the mid-layer
bottom operation handlers is best done right after registering the
corresponding KMS object.
The mid-layer is not split between CRTC, encoder and connector
operations. To use it, a driver must provide bottom functions for all of
the three KMS entities.
Atomic Modeset Helper Functions Reference
=========================================
Overview
--------
.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
:doc: overview
Implementing Asynchronous Atomic Commit
---------------------------------------
.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
:doc: implementing nonblocking commit
Atomic State Reset and Initialization
-------------------------------------
.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
:doc: atomic state reset and initialization
.. kernel-doc:: include/drm/drm_atomic_helper.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
:export:
Modeset Helper Reference for Common Vtables
===========================================
.. kernel-doc:: include/drm/drm_modeset_helper_vtables.h
:internal:
.. kernel-doc:: include/drm/drm_modeset_helper_vtables.h
:doc: overview
Legacy CRTC/Modeset Helper Functions Reference
==============================================
.. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c
:export:
.. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c
:doc: overview
Output Probing Helper Functions Reference
=========================================
.. kernel-doc:: drivers/gpu/drm/drm_probe_helper.c
:doc: output probing helper overview
.. kernel-doc:: drivers/gpu/drm/drm_probe_helper.c
:export:
fbdev Helper Functions Reference
================================
.. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c
:doc: fbdev helpers
.. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c
:export:
.. kernel-doc:: include/drm/drm_fb_helper.h
:internal:
Framebuffer CMA Helper Functions Reference
==========================================
.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c
:doc: framebuffer cma helper functions
.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c
:export:
Display Port Helper Functions Reference
=======================================
.. kernel-doc:: drivers/gpu/drm/drm_dp_helper.c
:doc: dp helpers
.. kernel-doc:: include/drm/drm_dp_helper.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_dp_helper.c
:export:
Display Port Dual Mode Adaptor Helper Functions Reference
=========================================================
.. kernel-doc:: drivers/gpu/drm/drm_dp_dual_mode_helper.c
:doc: dp dual mode helpers
.. kernel-doc:: include/drm/drm_dp_dual_mode_helper.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_dp_dual_mode_helper.c
:export:
Display Port MST Helper Functions Reference
===========================================
.. kernel-doc:: drivers/gpu/drm/drm_dp_mst_topology.c
:doc: dp mst helper
.. kernel-doc:: include/drm/drm_dp_mst_helper.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_dp_mst_topology.c
:export:
MIPI DSI Helper Functions Reference
===================================
.. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c
:doc: dsi helpers
.. kernel-doc:: include/drm/drm_mipi_dsi.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c
:export:
EDID Helper Functions Reference
===============================
.. kernel-doc:: drivers/gpu/drm/drm_edid.c
:export:
Rectangle Utilities Reference
=============================
.. kernel-doc:: include/drm/drm_rect.h
:doc: rect utils
.. kernel-doc:: include/drm/drm_rect.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_rect.c
:export:
Flip-work Helper Reference
==========================
.. kernel-doc:: include/drm/drm_flip_work.h
:doc: flip utils
.. kernel-doc:: include/drm/drm_flip_work.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_flip_work.c
:export:
HDMI Infoframes Helper Reference
================================
Strictly speaking this is not a DRM helper library but generally useable
by any driver interfacing with HDMI outputs like v4l or alsa drivers.
But it nicely fits into the overall topic of mode setting helper
libraries and hence is also included here.
.. kernel-doc:: include/linux/hdmi.h
:internal:
.. kernel-doc:: drivers/video/hdmi.c
:export:
Plane Helper Reference
======================
.. kernel-doc:: drivers/gpu/drm/drm_plane_helper.c
:export:
.. kernel-doc:: drivers/gpu/drm/drm_plane_helper.c
:doc: overview
Tile group
----------
.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
:doc: Tile group
Bridges
=======
Overview
--------
.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
:doc: overview
Default bridge callback sequence
--------------------------------
.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
:doc: bridge callbacks
.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
:export:
Panel Helper Reference
======================
.. kernel-doc:: include/drm/drm_panel.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_panel.c
:export:
.. kernel-doc:: drivers/gpu/drm/drm_panel.c
:doc: drm panel
Simple KMS Helper Reference
===========================
.. kernel-doc:: include/drm/drm_simple_kms_helper.h
:internal:
.. kernel-doc:: drivers/gpu/drm/drm_simple_kms_helper.c
:export:
.. kernel-doc:: drivers/gpu/drm/drm_simple_kms_helper.c
:doc: overview
Documentation/gpu/drm-kms.rst
+656
View File
File diff suppressed because it is too large Load Diff
Documentation/gpu/drm-mm.rst
+454
View File
@@ -0,0 +1,454 @@
=====================
DRM Memory Management
=====================
Modern Linux systems require large amount of graphics memory to store
frame buffers, textures, vertices and other graphics-related data. Given
the very dynamic nature of many of that data, managing graphics memory
efficiently is thus crucial for the graphics stack and plays a central
role in the DRM infrastructure.
The DRM core includes two memory managers, namely Translation Table Maps
(TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory
manager to be developed and tried to be a one-size-fits-them all
solution. It provides a single userspace API to accommodate the need of
all hardware, supporting both Unified Memory Architecture (UMA) devices
and devices with dedicated video RAM (i.e. most discrete video cards).
This resulted in a large, complex piece of code that turned out to be
hard to use for driver development.
GEM started as an Intel-sponsored project in reaction to TTM's
complexity. Its design philosophy is completely different: instead of
providing a solution to every graphics memory-related problems, GEM
identified common code between drivers and created a support library to
share it. GEM has simpler initialization and execution requirements than
TTM, but has no video RAM management capabilities and is thus limited to
UMA devices.
The Translation Table Manager (TTM)
-----------------------------------
TTM design background and information belongs here.
TTM initialization
~~~~~~~~~~~~~~~~~~
**Warning**
This section is outdated.
Drivers wishing to support TTM must fill out a drm_bo_driver
structure. The structure contains several fields with function pointers
for initializing the TTM, allocating and freeing memory, waiting for
command completion and fence synchronization, and memory migration. See
the radeon_ttm.c file for an example of usage.
The ttm_global_reference structure is made up of several fields:
::
struct ttm_global_reference {
enum ttm_global_types global_type;
size_t size;
void *object;
int (*init) (struct ttm_global_reference *);
void (*release) (struct ttm_global_reference *);
};
There should be one global reference structure for your memory manager
as a whole, and there will be others for each object created by the
memory manager at runtime. Your global TTM should have a type of
TTM_GLOBAL_TTM_MEM. The size field for the global object should be
sizeof(struct ttm_mem_global), and the init and release hooks should
point at your driver-specific init and release routines, which probably
eventually call ttm_mem_global_init and ttm_mem_global_release,
respectively.
Once your global TTM accounting structure is set up and initialized by
calling ttm_global_item_ref() on it, you need to create a buffer
object TTM to provide a pool for buffer object allocation by clients and
the kernel itself. The type of this object should be
TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct
ttm_bo_global). Again, driver-specific init and release functions may
be provided, likely eventually calling ttm_bo_global_init() and
ttm_bo_global_release(), respectively. Also, like the previous
object, ttm_global_item_ref() is used to create an initial reference
count for the TTM, which will call your initialization function.
The Graphics Execution Manager (GEM)
------------------------------------
The GEM design approach has resulted in a memory manager that doesn't
provide full coverage of all (or even all common) use cases in its
userspace or kernel API. GEM exposes a set of standard memory-related
operations to userspace and a set of helper functions to drivers, and
let drivers implement hardware-specific operations with their own
private API.
The GEM userspace API is described in the `GEM - the Graphics Execution
Manager <http://lwn.net/Articles/283798/>`__ article on LWN. While
slightly outdated, the document provides a good overview of the GEM API
principles. Buffer allocation and read and write operations, described
as part of the common GEM API, are currently implemented using
driver-specific ioctls.
GEM is data-agnostic. It manages abstract buffer objects without knowing
what individual buffers contain. APIs that require knowledge of buffer
contents or purpose, such as buffer allocation or synchronization
primitives, are thus outside of the scope of GEM and must be implemented
using driver-specific ioctls.
On a fundamental level, GEM involves several operations:
- Memory allocation and freeing
- Command execution
- Aperture management at command execution time
Buffer object allocation is relatively straightforward and largely
provided by Linux's shmem layer, which provides memory to back each
object.
Device-specific operations, such as command execution, pinning, buffer
read & write, mapping, and domain ownership transfers are left to
driver-specific ioctls.
GEM Initialization
~~~~~~~~~~~~~~~~~~
Drivers that use GEM must set the DRIVER_GEM bit in the struct
:c:type:`struct drm_driver <drm_driver>` driver_features
field. The DRM core will then automatically initialize the GEM core
before calling the load operation. Behind the scene, this will create a
DRM Memory Manager object which provides an address space pool for
object allocation.
In a KMS configuration, drivers need to allocate and initialize a
command ring buffer following core GEM initialization if required by the
hardware. UMA devices usually have what is called a "stolen" memory
region, which provides space for the initial framebuffer and large,
contiguous memory regions required by the device. This space is
typically not managed by GEM, and must be initialized separately into
its own DRM MM object.
GEM Objects Creation
~~~~~~~~~~~~~~~~~~~~
GEM splits creation of GEM objects and allocation of the memory that
backs them in two distinct operations.
GEM objects are represented by an instance of struct :c:type:`struct
drm_gem_object <drm_gem_object>`. Drivers usually need to
extend GEM objects with private information and thus create a
driver-specific GEM object structure type that embeds an instance of
struct :c:type:`struct drm_gem_object <drm_gem_object>`.
To create a GEM object, a driver allocates memory for an instance of its
specific GEM object type and initializes the embedded struct
:c:type:`struct drm_gem_object <drm_gem_object>` with a call
to :c:func:`drm_gem_object_init()`. The function takes a pointer
to the DRM device, a pointer to the GEM object and the buffer object
size in bytes.
GEM uses shmem to allocate anonymous pageable memory.
:c:func:`drm_gem_object_init()` will create an shmfs file of the
requested size and store it into the struct :c:type:`struct
drm_gem_object <drm_gem_object>` filp field. The memory is
used as either main storage for the object when the graphics hardware
uses system memory directly or as a backing store otherwise.
Drivers are responsible for the actual physical pages allocation by
calling :c:func:`shmem_read_mapping_page_gfp()` for each page.
Note that they can decide to allocate pages when initializing the GEM
object, or to delay allocation until the memory is needed (for instance
when a page fault occurs as a result of a userspace memory access or
when the driver needs to start a DMA transfer involving the memory).
Anonymous pageable memory allocation is not always desired, for instance
when the hardware requires physically contiguous system memory as is
often the case in embedded devices. Drivers can create GEM objects with
no shmfs backing (called private GEM objects) by initializing them with
a call to :c:func:`drm_gem_private_object_init()` instead of
:c:func:`drm_gem_object_init()`. Storage for private GEM objects
must be managed by drivers.
GEM Objects Lifetime
~~~~~~~~~~~~~~~~~~~~
All GEM objects are reference-counted by the GEM core. References can be
acquired and release by :c:func:`calling
drm_gem_object_reference()` and
:c:func:`drm_gem_object_unreference()` respectively. The caller
must hold the :c:type:`struct drm_device <drm_device>`
struct_mutex lock when calling
:c:func:`drm_gem_object_reference()`. As a convenience, GEM
provides :c:func:`drm_gem_object_unreference_unlocked()`
functions that can be called without holding the lock.
When the last reference to a GEM object is released the GEM core calls
the :c:type:`struct drm_driver <drm_driver>` gem_free_object
operation. That operation is mandatory for GEM-enabled drivers and must
free the GEM object and all associated resources.
void (\*gem_free_object) (struct drm_gem_object \*obj); Drivers are
responsible for freeing all GEM object resources. This includes the
resources created by the GEM core, which need to be released with
:c:func:`drm_gem_object_release()`.
GEM Objects Naming
~~~~~~~~~~~~~~~~~~
Communication between userspace and the kernel refers to GEM objects
using local handles, global names or, more recently, file descriptors.
All of those are 32-bit integer values; the usual Linux kernel limits
apply to the file descriptors.
GEM handles are local to a DRM file. Applications get a handle to a GEM
object through a driver-specific ioctl, and can use that handle to refer
to the GEM object in other standard or driver-specific ioctls. Closing a
DRM file handle frees all its GEM handles and dereferences the
associated GEM objects.
To create a handle for a GEM object drivers call
:c:func:`drm_gem_handle_create()`. The function takes a pointer
to the DRM file and the GEM object and returns a locally unique handle.
When the handle is no longer needed drivers delete it with a call to
:c:func:`drm_gem_handle_delete()`. Finally the GEM object
associated with a handle can be retrieved by a call to
:c:func:`drm_gem_object_lookup()`.
Handles don't take ownership of GEM objects, they only take a reference
to the object that will be dropped when the handle is destroyed. To
avoid leaking GEM objects, drivers must make sure they drop the
reference(s) they own (such as the initial reference taken at object
creation time) as appropriate, without any special consideration for the
handle. For example, in the particular case of combined GEM object and
handle creation in the implementation of the dumb_create operation,
drivers must drop the initial reference to the GEM object before
returning the handle.
GEM names are similar in purpose to handles but are not local to DRM
files. They can be passed between processes to reference a GEM object
globally. Names can't be used directly to refer to objects in the DRM
API, applications must convert handles to names and names to handles
using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls
respectively. The conversion is handled by the DRM core without any
driver-specific support.
GEM also supports buffer sharing with dma-buf file descriptors through
PRIME. GEM-based drivers must use the provided helpers functions to
implement the exporting and importing correctly. See ?. Since sharing
file descriptors is inherently more secure than the easily guessable and
global GEM names it is the preferred buffer sharing mechanism. Sharing
buffers through GEM names is only supported for legacy userspace.
Furthermore PRIME also allows cross-device buffer sharing since it is
based on dma-bufs.
GEM Objects Mapping
~~~~~~~~~~~~~~~~~~~
Because mapping operations are fairly heavyweight GEM favours
read/write-like access to buffers, implemented through driver-specific
ioctls, over mapping buffers to userspace. However, when random access
to the buffer is needed (to perform software rendering for instance),
direct access to the object can be more efficient.
The mmap system call can't be used directly to map GEM objects, as they
don't have their own file handle. Two alternative methods currently
co-exist to map GEM objects to userspace. The first method uses a
driver-specific ioctl to perform the mapping operation, calling
:c:func:`do_mmap()` under the hood. This is often considered
dubious, seems to be discouraged for new GEM-enabled drivers, and will
thus not be described here.
The second method uses the mmap system call on the DRM file handle. void
\*mmap(void \*addr, size_t length, int prot, int flags, int fd, off_t
offset); DRM identifies the GEM object to be mapped by a fake offset
passed through the mmap offset argument. Prior to being mapped, a GEM
object must thus be associated with a fake offset. To do so, drivers
must call :c:func:`drm_gem_create_mmap_offset()` on the object.
Once allocated, the fake offset value must be passed to the application
in a driver-specific way and can then be used as the mmap offset
argument.
The GEM core provides a helper method :c:func:`drm_gem_mmap()` to
handle object mapping. The method can be set directly as the mmap file
operation handler. It will look up the GEM object based on the offset
value and set the VMA operations to the :c:type:`struct drm_driver
<drm_driver>` gem_vm_ops field. Note that
:c:func:`drm_gem_mmap()` doesn't map memory to userspace, but
relies on the driver-provided fault handler to map pages individually.
To use :c:func:`drm_gem_mmap()`, drivers must fill the struct
:c:type:`struct drm_driver <drm_driver>` gem_vm_ops field
with a pointer to VM operations.
struct vm_operations_struct \*gem_vm_ops struct
vm_operations_struct { void (\*open)(struct vm_area_struct \* area);
void (\*close)(struct vm_area_struct \* area); int (\*fault)(struct
vm_area_struct \*vma, struct vm_fault \*vmf); };
The open and close operations must update the GEM object reference
count. Drivers can use the :c:func:`drm_gem_vm_open()` and
:c:func:`drm_gem_vm_close()` helper functions directly as open
and close handlers.
The fault operation handler is responsible for mapping individual pages
to userspace when a page fault occurs. Depending on the memory
allocation scheme, drivers can allocate pages at fault time, or can
decide to allocate memory for the GEM object at the time the object is
created.
Drivers that want to map the GEM object upfront instead of handling page
faults can implement their own mmap file operation handler.
Memory Coherency
~~~~~~~~~~~~~~~~
When mapped to the device or used in a command buffer, backing pages for
an object are flushed to memory and marked write combined so as to be
coherent with the GPU. Likewise, if the CPU accesses an object after the
GPU has finished rendering to the object, then the object must be made
coherent with the CPU's view of memory, usually involving GPU cache
flushing of various kinds. This core CPU<->GPU coherency management is
provided by a device-specific ioctl, which evaluates an object's current
domain and performs any necessary flushing or synchronization to put the
object into the desired coherency domain (note that the object may be
busy, i.e. an active render target; in that case, setting the domain
blocks the client and waits for rendering to complete before performing
any necessary flushing operations).
Command Execution
~~~~~~~~~~~~~~~~~
Perhaps the most important GEM function for GPU devices is providing a
command execution interface to clients. Client programs construct
command buffers containing references to previously allocated memory
objects, and then submit them to GEM. At that point, GEM takes care to
bind all the objects into the GTT, execute the buffer, and provide
necessary synchronization between clients accessing the same buffers.
This often involves evicting some objects from the GTT and re-binding
others (a fairly expensive operation), and providing relocation support
which hides fixed GTT offsets from clients. Clients must take care not
to submit command buffers that reference more objects than can fit in
the GTT; otherwise, GEM will reject them and no rendering will occur.
Similarly, if several objects in the buffer require fence registers to
be allocated for correct rendering (e.g. 2D blits on pre-965 chips),
care must be taken not to require more fence registers than are
available to the client. Such resource management should be abstracted
from the client in libdrm.
GEM Function Reference
----------------------
.. kernel-doc:: drivers/gpu/drm/drm_gem.c
:export:
.. kernel-doc:: include/drm/drm_gem.h
:internal:
VMA Offset Manager
------------------
.. kernel-doc:: drivers/gpu/drm/drm_vma_manager.c
:doc: vma offset manager
.. kernel-doc:: drivers/gpu/drm/drm_vma_manager.c
:export:
.. kernel-doc:: include/drm/drm_vma_manager.h
:internal:
PRIME Buffer Sharing
--------------------
PRIME is the cross device buffer sharing framework in drm, originally
created for the OPTIMUS range of multi-gpu platforms. To userspace PRIME
buffers are dma-buf based file descriptors.
Overview and Driver Interface
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Similar to GEM global names, PRIME file descriptors are also used to
share buffer objects across processes. They offer additional security:
as file descriptors must be explicitly sent over UNIX domain sockets to
be shared between applications, they can't be guessed like the globally
unique GEM names.
Drivers that support the PRIME API must set the DRIVER_PRIME bit in the
struct :c:type:`struct drm_driver <drm_driver>`
driver_features field, and implement the prime_handle_to_fd and
prime_fd_to_handle operations.
int (\*prime_handle_to_fd)(struct drm_device \*dev, struct drm_file
\*file_priv, uint32_t handle, uint32_t flags, int \*prime_fd); int
(\*prime_fd_to_handle)(struct drm_device \*dev, struct drm_file
\*file_priv, int prime_fd, uint32_t \*handle); Those two operations
convert a handle to a PRIME file descriptor and vice versa. Drivers must
use the kernel dma-buf buffer sharing framework to manage the PRIME file
descriptors. Similar to the mode setting API PRIME is agnostic to the
underlying buffer object manager, as long as handles are 32bit unsigned
integers.
While non-GEM drivers must implement the operations themselves, GEM
drivers must use the :c:func:`drm_gem_prime_handle_to_fd()` and
:c:func:`drm_gem_prime_fd_to_handle()` helper functions. Those
helpers rely on the driver gem_prime_export and gem_prime_import
operations to create a dma-buf instance from a GEM object (dma-buf
exporter role) and to create a GEM object from a dma-buf instance
(dma-buf importer role).
struct dma_buf \* (\*gem_prime_export)(struct drm_device \*dev,
struct drm_gem_object \*obj, int flags); struct drm_gem_object \*
(\*gem_prime_import)(struct drm_device \*dev, struct dma_buf
\*dma_buf); These two operations are mandatory for GEM drivers that
support PRIME.
PRIME Helper Functions
~~~~~~~~~~~~~~~~~~~~~~
.. kernel-doc:: drivers/gpu/drm/drm_prime.c
:doc: PRIME Helpers
PRIME Function References
-------------------------
.. kernel-doc:: drivers/gpu/drm/drm_prime.c
:export:
DRM MM Range Allocator
----------------------
Overview
~~~~~~~~
.. kernel-doc:: drivers/gpu/drm/drm_mm.c
:doc: Overview
LRU Scan/Eviction Support
~~~~~~~~~~~~~~~~~~~~~~~~~
.. kernel-doc:: drivers/gpu/drm/drm_mm.c
:doc: lru scan roaster
DRM MM Range Allocator Function References
------------------------------------------
.. kernel-doc:: drivers/gpu/drm/drm_mm.c
:export:
.. kernel-doc:: include/drm/drm_mm.h
:internal:
CMA Helper Functions Reference
------------------------------
.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
:doc: cma helpers
.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
:export:
.. kernel-doc:: include/drm/drm_gem_cma_helper.h
:internal:
Documentation/gpu/index.rst
+3
View File
@@ -6,6 +6,9 @@ Linux GPU Driver Developer's Guide
introduction
drm-internals
drm-mm
drm-kms
drm-kms-helpers
drm-uapi
i915
vga-switcheroo