Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking update from David Miller:

 1) Fix dump iterator in nfnl_acct_dump() and ctnl_timeout_dump() to
    dump all objects properly, from Pablo Neira Ayuso.

 2) xt_TCPMSS must use the default MSS of 536 when no MSS TCP option is
    present.  Fix from Phil Oester.

 3) qdisc_get_rtab() looks for an existing matching rate table and uses
    that instead of creating a new one.  However, it's key matching is
    incomplete, it fails to check to make sure the ->data[] array is
    identical too.  Fix from Eric Dumazet.

 4) ip_vs_dest_entry isn't fully initialized before copying back to
    userspace, fix from Dan Carpenter.

 5) Fix ubuf reference counting regression in vhost_net, from Jason
    Wang.

 6) When sock_diag dumps a socket filter back to userspace, we have to
    translate it out of the kernel's internal representation first.
    From Nicolas Dichtel.

 7) davinci_mdio holds a spinlock while calling pm_runtime, which
    sleeps.  Fix from Sebastian Siewior.

 8) Timeout check in sh_eth_check_reset is off by one, from Sergei
    Shtylyov.

 9) If sctp socket init fails, we can NULL deref during cleanup.  Fix
    from Daniel Borkmann.

10) netlink_mmap() does not propagate errors properly, from Patrick
    McHardy.

11) Disable powersave and use minstrel by default in ath9k.  From Sujith
    Manoharan.

12) Fix a regression in that SOCK_ZEROCOPY is not set on tuntap sockets
    which prevents vhost from being able to use zerocopy.  From Jason
    Wang.

13) Fix race between port lookup and TX path in team driver, from Jiri
    Pirko.

14) Missing length checks in bluetooth L2CAP packet parsing, from Johan
    Hedberg.

15) rtlwifi fails to connect to networking using any encryption method
    other than WPA2.  Fix from Larry Finger.

16) Fix iwlegacy build due to incorrect CONFIG_* ifdeffing for power
    management stuff.  From Yijing Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  b43: stop format string leaking into error msgs
  ath9k: Use minstrel rate control by default
  Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity"
  ath9k: Disable PowerSave by default
  net: wireless: iwlegacy: fix build error for il_pm_ops
  rtlwifi: Fix a false leak indication for PCI devices
  wl12xx/wl18xx: scan all 5ghz channels
  wl12xx: increase minimum singlerole firmware version required
  wl12xx: fix minimum required firmware version for wl127x multirole
  rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networks
  mwifiex: debugfs: Fix out of bounds array access
  Bluetooth: Fix mgmt handling of power on failures
  Bluetooth: Fix missing length checks for L2CAP signalling PDUs
  Bluetooth: btmrvl: support Marvell Bluetooth device SD8897
  Bluetooth: Fix checks for LE support on LE-only controllers
  team: fix checks in team_get_first_port_txable_rcu()
  team: move add to port list before port enablement
  team: check return value of team_get_port_by_index_rcu() for NULL
  tuntap: set SOCK_ZEROCOPY flag during open
  netlink: fix error propagation in netlink_mmap()
  ...
This commit is contained in:
Linus Torvalds
2013-06-12 17:18:29 -07:00
50 changed files with 377 additions and 136 deletions
+2 -2
View File
@@ -201,7 +201,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
Marvell Bluetooth devices, such as 8688/8787/8797.
Marvell Bluetooth devices, such as 8688/8787/8797/8897.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -214,7 +214,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
devices with SDIO interface. Currently SD8688/SD8787/SD8797
devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
+28
View File
@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.io_port_2 = 0x7a,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
.card_status = 0x50,
.sq_read_base_addr_a0 = 0x60,
.sq_read_base_addr_a1 = 0x61,
.card_revision = 0xbc,
.card_fw_status0 = 0xc0,
.card_fw_status1 = 0xc1,
.card_rx_len = 0xc2,
.card_rx_unit = 0xc3,
.io_port_0 = 0xd8,
.io_port_1 = 0xd9,
.io_port_2 = 0xda,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.sd_blksz_fw_dl = 256,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.helper = NULL,
.firmware = "mrvl/sd8897_uapsta.bin",
.reg = &btmrvl_reg_88xx,
.sd_blksz_fw_dl = 256,
};
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
/* Marvell SD8897 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
.driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
{ } /* Terminating entry */
};
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+2 -2
View File
@@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev)
mdelay(1);
cnt--;
}
if (cnt < 0) {
pr_err("Device reset fail\n");
if (cnt <= 0) {
pr_err("Device reset failed\n");
ret = -ETIMEDOUT;
}
return ret;
+2 -3
View File
@@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev)
__raw_writel(ctrl, &data->regs->control);
wait_for_idle(data);
pm_runtime_put_sync(data->dev);
data->suspended = true;
spin_unlock(&data->lock);
pm_runtime_put_sync(data->dev);
return 0;
}
@@ -462,9 +461,9 @@ static int davinci_mdio_resume(struct device *dev)
struct davinci_mdio_data *data = dev_get_drvdata(dev);
u32 ctrl;
spin_lock(&data->lock);
pm_runtime_get_sync(data->dev);
spin_lock(&data->lock);
/* restart the scan state machine */
ctrl = __raw_readl(&data->regs->control);
ctrl |= CONTROL_ENABLE;
+1 -1
View File
@@ -1092,8 +1092,8 @@ static int team_port_add(struct team *team, struct net_device *port_dev)
}
port->index = -1;
team_port_enable(team, port);
list_add_tail_rcu(&port->list, &team->port_list);
team_port_enable(team, port);
__team_compute_features(team);
__team_port_change_port_added(port, !!netif_carrier_ok(port_dev));
__team_options_change_check(team);
+2
View File
@@ -28,6 +28,8 @@ static bool rnd_transmit(struct team *team, struct sk_buff *skb)
port_index = random_N(team->en_port_count);
port = team_get_port_by_index_rcu(team, port_index);
if (unlikely(!port))
goto drop;
port = team_get_first_port_txable_rcu(team, port);
if (unlikely(!port))
goto drop;
+2
View File
@@ -32,6 +32,8 @@ static bool rr_transmit(struct team *team, struct sk_buff *skb)
port_index = rr_priv(team)->sent_packets++ % team->en_port_count;
port = team_get_port_by_index_rcu(team, port_index);
if (unlikely(!port))
goto drop;
port = team_get_first_port_txable_rcu(team, port);
if (unlikely(!port))
goto drop;
+3 -1
View File
@@ -352,7 +352,7 @@ static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb)
u32 numqueues = 0;
rcu_read_lock();
numqueues = tun->numqueues;
numqueues = ACCESS_ONCE(tun->numqueues);
txq = skb_get_rxhash(skb);
if (txq) {
@@ -2159,6 +2159,8 @@ static int tun_chr_open(struct inode *inode, struct file * file)
set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags);
INIT_LIST_HEAD(&tfile->next);
sock_set_flag(&tfile->sk, SOCK_ZEROCOPY);
return 0;
}
+6
View File
@@ -627,6 +627,12 @@ static const struct usb_device_id products [] = {
.driver_info = 0,
},
/* Huawei E1820 - handled by qmi_wwan */
{
USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
.driver_info = 0,
},
/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE)
{
+1
View File
@@ -519,6 +519,7 @@ static const struct usb_device_id products[] = {
/* 3. Combined interface devices matching on interface number */
{QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */
{QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
+7 -3
View File
@@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG
This option enables collection of statistics for Rx/Tx status
data and some other MAC related statistics
config ATH9K_RATE_CONTROL
config ATH9K_LEGACY_RATE_CONTROL
bool "Atheros ath9k rate control"
depends on ATH9K
default y
default n
---help---
Say Y, if you want to use the ath9k specific rate control
module instead of minstrel_ht.
module instead of minstrel_ht. Be warned that there are various
issues with the ath9k RC and minstrel is a more robust algorithm.
Note that even if this option is selected, "ath9k_rate_control"
has to be passed to mac80211 using the module parameter,
ieee80211_default_rc_algo.
config ATH9K_HTC
tristate "Atheros HTC based wireless cards support"
+1 -1
View File
@@ -8,7 +8,7 @@ ath9k-y += beacon.o \
antenna.o
ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
ath9k-$(CONFIG_ATH9K_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
@@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = {
{0x0000a074, 0x00000000},
{0x0000a078, 0x00000000},
{0x0000a07c, 0x00000000},
{0x0000a080, 0x1a1a1a1a},
{0x0000a084, 0x1a1a1a1a},
{0x0000a088, 0x1a1a1a1a},
{0x0000a08c, 0x1a1a1a1a},
{0x0000a090, 0x171a1a1a},
{0x0000a080, 0x22222229},
{0x0000a084, 0x1d1d1d1d},
{0x0000a088, 0x1d1d1d1d},
{0x0000a08c, 0x1d1d1d1d},
{0x0000a090, 0x171d1d1d},
{0x0000a094, 0x11111717},
{0x0000a098, 0x00030311},
{0x0000a09c, 0x00000000},
+1 -6
View File
@@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->iface_combinations = if_comb;
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
if (AR_SREV_5416(sc->sc_ah))
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
@@ -830,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
sc->ant_rx = hw->wiphy->available_antennas_rx;
sc->ant_tx = hw->wiphy->available_antennas_tx;
#ifdef CONFIG_ATH9K_RATE_CONTROL
hw->rate_control_algorithm = "ath9k_rate_control";
#endif
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
+1 -1
View File
@@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
}
#endif
#ifdef CONFIG_ATH9K_RATE_CONTROL
#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);
#else
+1 -1
View File
@@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work)
for (i = 0; i < B43_NR_FWTYPES; i++) {
errmsg = ctx->errors[i];
if (strlen(errmsg))
b43err(dev->wl, errmsg);
b43err(dev->wl, "%s", errmsg);
}
b43_print_fw_helptext(dev->wl, 1);
goto out;
+3 -3
View File
@@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
__le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
u32 beacon_interval);
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
extern const struct dev_pm_ops il_pm_ops;
#define IL_LEGACY_PM_OPS (&il_pm_ops)
#else /* !CONFIG_PM */
#else /* !CONFIG_PM_SLEEP */
#define IL_LEGACY_PM_OPS NULL
#endif /* !CONFIG_PM */
#endif /* !CONFIG_PM_SLEEP */
/*****************************************************
* Error Handling Debugging
+17 -5
View File
@@ -26,10 +26,17 @@
static struct dentry *mwifiex_dfs_dir;
static char *bss_modes[] = {
"Unknown",
"Ad-hoc",
"Managed",
"Auto"
"UNSPECIFIED",
"ADHOC",
"STATION",
"AP",
"AP_VLAN",
"WDS",
"MONITOR",
"MESH_POINT",
"P2P_CLIENT",
"P2P_GO",
"P2P_DEVICE",
};
/* size/addr for mwifiex_debug_info */
@@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf,
p += sprintf(p, "driver_version = %s", fmt);
p += sprintf(p, "\nverext = %s", priv->version_str);
p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
if (info.bss_mode >= ARRAY_SIZE(bss_modes))
p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode);
else
p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
p += sprintf(p, "media_state=\"%s\"\n",
(!priv->media_connected ? "Disconnected" : "Connected"));
p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr);
+1
View File
@@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
"can't alloc skb for rx\n");
goto done;
}
kmemleak_not_leak(new_skb);
pci_unmap_single(rtlpci->pdev,
*((dma_addr_t *) skb->cb),
+99 -33
View File
@@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
}
void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
struct ieee80211_sta *sta,
u8 rssi_level)
static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
u32 ratr_value = (u32) mac->basic_rates;
u8 *mcsrate = mac->mcs;
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
u32 ratr_value;
u8 ratr_index = 0;
u8 nmode = mac->ht_enable;
u8 mimo_ps = 1;
u16 shortgi_rate = 0;
u32 tmp_ratr_value = 0;
u8 mimo_ps = IEEE80211_SMPS_OFF;
u16 shortgi_rate;
u32 tmp_ratr_value;
u8 curtxbw_40mhz = mac->bw_40;
u8 curshortgi_40mhz = mac->sgi_40;
u8 curshortgi_20mhz = mac->sgi_20;
u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1 : 0;
u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1 : 0;
enum wireless_mode wirelessmode = mac->mode;
ratr_value |= ((*(u16 *) (mcsrate))) << 12;
if (rtlhal->current_bandtype == BAND_ON_5G)
ratr_value = sta->supp_rates[1] << 4;
else
ratr_value = sta->supp_rates[0];
if (mac->opmode == NL80211_IFTYPE_ADHOC)
ratr_value = 0xfff;
ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
if (ratr_value & 0x0000000c)
@@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
nmode = 1;
if (mimo_ps == 0) {
if (mimo_ps == IEEE80211_SMPS_STATIC) {
ratr_value &= 0x0007F005;
} else {
u32 ratr_mask;
@@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
ratr_mask = 0x000ff005;
else
ratr_mask = 0x0f0ff005;
if (curtxbw_40mhz)
ratr_mask |= 0x00000010;
ratr_value &= ratr_mask;
}
break;
@@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
ratr_value &= 0x000ff0ff;
else
ratr_value &= 0x0f0ff0ff;
break;
}
ratr_value &= 0x0FFFFFFF;
if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
(!curtxbw_40mhz && curshortgi_20mhz))) {
if (nmode && ((curtxbw_40mhz &&
curshortgi_40mhz) || (!curtxbw_40mhz &&
curshortgi_20mhz))) {
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);
for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
if ((1 << shortgi_rate) & tmp_ratr_value)
break;
}
shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
(shortgi_rate << 4) | (shortgi_rate);
(shortgi_rate << 4) | (shortgi_rate);
}
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
rtl_read_dword(rtlpriv, REG_ARFR0));
}
void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw,
struct ieee80211_sta *sta,
u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
u32 ratr_bitmap = (u32) mac->basic_rates;
u8 *p_mcsrate = mac->mcs;
u8 ratr_index = 0;
u8 curtxbw_40mhz = mac->bw_40;
u8 curshortgi_40mhz = mac->sgi_40;
u8 curshortgi_20mhz = mac->sgi_20;
enum wireless_mode wirelessmode = mac->mode;
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_sta_info *sta_entry = NULL;
u32 ratr_bitmap;
u8 ratr_index;
u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
u8 curshortgi_40mhz = curtxbw_40mhz &&
(sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1 : 0;
u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1 : 0;
enum wireless_mode wirelessmode = 0;
bool shortgi = false;
u8 rate_mask[5];
u8 macid = 0;
u8 mimops = 1;
u8 mimo_ps = IEEE80211_SMPS_OFF;
ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
wirelessmode = sta_entry->wireless_mode;
if (mac->opmode == NL80211_IFTYPE_STATION ||
mac->opmode == NL80211_IFTYPE_MESH_POINT)
curtxbw_40mhz = mac->bw_40;
else if (mac->opmode == NL80211_IFTYPE_AP ||
mac->opmode == NL80211_IFTYPE_ADHOC)
macid = sta->aid + 1;
if (rtlhal->current_bandtype == BAND_ON_5G)
ratr_bitmap = sta->supp_rates[1] << 4;
else
ratr_bitmap = sta->supp_rates[0];
if (mac->opmode == NL80211_IFTYPE_ADHOC)
ratr_bitmap = 0xfff;
ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
ratr_index = RATR_INX_WIRELESS_B;
@@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
break;
case WIRELESS_MODE_G:
ratr_index = RATR_INX_WIRELESS_GB;
if (rssi_level == 1)
ratr_bitmap &= 0x00000f00;
else if (rssi_level == 2)
@@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
ratr_index = RATR_INX_WIRELESS_NGB;
if (mimops == 0) {
if (mimo_ps == IEEE80211_SMPS_STATIC) {
if (rssi_level == 1)
ratr_bitmap &= 0x00070000;
else if (rssi_level == 2)
@@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
}
}
}
if ((curtxbw_40mhz && curshortgi_40mhz) ||
(!curtxbw_40mhz && curshortgi_20mhz)) {
if (macid == 0)
shortgi = true;
else if (macid == 1)
@@ -2138,21 +2183,42 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
break;
default:
ratr_index = RATR_INX_WIRELESS_NGB;
if (rtlphy->rf_type == RF_1T2R)
ratr_bitmap &= 0x000ff0ff;
else
ratr_bitmap &= 0x0f0ff0ff;
break;
}
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n",
ratr_bitmap);
*(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) |
ratr_index << 28);
sta_entry->ratr_index = ratr_index;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
"ratr_bitmap :%x\n", ratr_bitmap);
*(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) |
(ratr_index << 28);
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
"Rate_index:%x, ratr_val:%x, %5phC\n",
ratr_index, ratr_bitmap, rate_mask);
rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
memcpy(rtlpriv->rate_mask, rate_mask, 5);
/* rtl92c_fill_h2c_cmd() does USB I/O and will result in a
* "scheduled while atomic" if called directly */
schedule_work(&rtlpriv->works.fill_h2c_cmd);
if (macid != 0)
sta_entry->ratr_index = ratr_index;
}
void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
struct ieee80211_sta *sta,
u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
if (rtlpriv->dm.useramask)
rtl92cu_update_hal_rate_mask(hw, sta, rssi_level);
else
rtl92cu_update_hal_rate_table(hw, sta);
}
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw)

Some files were not shown because too many files have changed in this diff Show More