Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Assorted fixes and cleanups to the existing drivers plus a new driver
  for IMS Passenger Control Unit device they use for ther in-flight
  entertainment system."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: trackpoint - Optimize trackpoint init to use power-on reset
  Input: apbps2 - convert to devm_ioremap_resource()
  Input: ALPS - use %ph to print buffers
  ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling
  Input: st1232 - add reset pin handling
  Input: st1232 - convert to devm_* infrastructure
  Input: MT - handle semi-mt devices in core
  Input: adxl34x - use spi_get_drvdata()
  Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ims-pcu - fix a memory leak on error
  Input: sysrq - supplement reset sequence with timeout functionality
  Input: tegra-kbc - support for defining row/columns based on SoC
  Input: imx_keypad - switch to using managed resources
  Input: arc_ps2 - add support for device tree
  Input: mma8450 - fix signed 12bits to 32bits conversion
  Input: eeti_ts - remove redundant null check
  Input: edt-ft5x06 - remove redundant null check before kfree
  Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions
  Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions
  ...

Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt

@@ -0,0 +1,16 @@
+Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse.
+
+The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system,
+these properties are built from information in the AMBA plug&play and from
+bootloader settings.
+
+Required properties:
+
+- name : Should be "GAISLER_APBPS2" or "01_060"
+- reg : Address and length of the register set for the device
+- interrupts : Interrupt numbers for this device
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf

Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt

@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		auo_pixcir_ts@5c {
+			compatible = "auo,auo_pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+
+			gpios = <&gpf 2 0 2>, /* INT */
+				<&gpf 5 1 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt

@@ -0,0 +1,24 @@
+* Sitronix st1232 touchscreen controller
+
+Required properties:
+- compatible: must be "sitronix,st1232"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- gpios: a phandle to the reset GPIO
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@55 {
+			compatible = "sitronix,st1232";
+			reg = <0x55>;
+			interrupts = <2 0>;
+			gpios = <&gpio1 166 0>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/serio/snps-arc_ps2.txt

@@ -0,0 +1,16 @@
+* ARC PS/2 driver: PS/2 block used in some ARC FPGA's & nSIM OSCI model
+
+Required properties:
+- compatible		: "snps,arc_ps2"
+- reg			: offset and length (always 0x14) of registers
+- interrupts		: interrupt
+- interrupt-names	: name of interrupt, must be "arc_ps2_irq"
+
+Example:
+
+serio@c9000400 {
+	compatible = "snps,arc_ps2";
+	reg = <0xc9000400 0x14>;
+	interrupts = <13>;
+	interrupt-names = "arc_ps2_irq";
+}

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
+#include <linux/platform_data/st1232_pdata.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
@@ -882,10 +883,15 @@ static struct platform_device i2c_gpio_device = {
 };
 
 /* I2C */
+static struct st1232_pdata st1232_i2c0_pdata = {
+	.reset_gpio = 166,
+};
+
 static struct i2c_board_info i2c0_devices[] = {
 	{
 		I2C_BOARD_INFO("st1232-ts", 0x55),
 		.irq = evt2irq(0x0340),
+		.platform_data = &st1232_i2c0_pdata,
 	},
 	{
 		I2C_BOARD_INFO("wm8978", 0x1a),
@@ -1009,7 +1015,6 @@ static void __init eva_init(void)
 
 	/* Touchscreen */
 	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
-	gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
 
 	/* GETHER */
 	gpio_request(GPIO_FN_ET_CRS,		NULL);

drivers/base/devres.c

@@ -670,6 +670,80 @@ int devres_release_group(struct device *dev, void *id)
 }
 EXPORT_SYMBOL_GPL(devres_release_group);
 
+/*
+ * Custom devres actions allow inserting a simple function call
+ * into the teadown sequence.
+ */
+
+struct action_devres {
+	void *data;
+	void (*action)(void *);
+};
+
+static int devm_action_match(struct device *dev, void *res, void *p)
+{
+	struct action_devres *devres = res;
+	struct action_devres *target = p;
+
+	return devres->action == target->action &&
+	       devres->data == target->data;
+}
+
+static void devm_action_release(struct device *dev, void *res)
+{
+	struct action_devres *devres = res;
+
+	devres->action(devres->data);
+}
+
+/**
+ * devm_add_action() - add a custom action to list of managed resources
+ * @dev: Device that owns the action
+ * @action: Function that should be called
+ * @data: Pointer to data passed to @action implementation
+ *
+ * This adds a custom action to the list of managed resources so that
+ * it gets executed as part of standard resource unwinding.
+ */
+int devm_add_action(struct device *dev, void (*action)(void *), void *data)
+{
+	struct action_devres *devres;
+
+	devres = devres_alloc(devm_action_release,
+			      sizeof(struct action_devres), GFP_KERNEL);
+	if (!devres)
+		return -ENOMEM;
+
+	devres->data = data;
+	devres->action = action;
+
+	devres_add(dev, devres);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_add_action);
+
+/**
+ * devm_remove_action() - removes previously added custom action
+ * @dev: Device that owns the action
+ * @action: Function implementing the action
+ * @data: Pointer to data passed to @action implementation
+ *
+ * Removes instance of @action previously added by devm_add_action().
+ * Both action and data should match one of the existing entries.
+ */
+void devm_remove_action(struct device *dev, void (*action)(void *), void *data)
+{
+	struct action_devres devres = {
+		.data = data,
+		.action = action,
+	};
+
+	WARN_ON(devres_destroy(dev, devm_action_release, devm_action_match,
+			       &devres));
+
+}
+EXPORT_SYMBOL_GPL(devm_remove_action);
+
 /*
  * Managed kzalloc/kfree
  */

drivers/input/input-mt.c

@@ -79,6 +79,8 @@ int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots,
 	}
 	if (flags & INPUT_MT_DIRECT)
 		__set_bit(INPUT_PROP_DIRECT, dev->propbit);
+	if (flags & INPUT_MT_SEMI_MT)
+		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
 	if (flags & INPUT_MT_TRACK) {
 		unsigned int n2 = num_slots * num_slots;
 		mt->red = kcalloc(n2, sizeof(*mt->red), GFP_KERNEL);
@@ -246,6 +248,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 {
 	struct input_mt *mt = dev->mt;
 	struct input_mt_slot *s;
+	bool use_count = false;
 
 	if (!mt)
 		return;
@@ -259,7 +262,10 @@ void input_mt_sync_frame(struct input_dev *dev)
 		}
 	}
 
-	input_mt_report_pointer_emulation(dev, (mt->flags & INPUT_MT_POINTER));
+	if ((mt->flags & INPUT_MT_POINTER) && !(mt->flags & INPUT_MT_SEMI_MT))
+		use_count = true;
+
+	input_mt_report_pointer_emulation(dev, use_count);
 
 	mt->frame++;
 }

drivers/input/keyboard/amikbd.c

@@ -260,18 +260,6 @@ static struct platform_driver amikbd_driver = {
 	},
 };
 
-static int __init amikbd_init(void)
-{
-	return platform_driver_probe(&amikbd_driver, amikbd_probe);
-}
-
-module_init(amikbd_init);
-
-static void __exit amikbd_exit(void)
-{
-	platform_driver_unregister(&amikbd_driver);
-}
-
-module_exit(amikbd_exit);
+module_platform_driver_probe(amikbd_driver, amikbd_probe);
 
 MODULE_ALIAS("platform:amiga-keyboard");

drivers/input/keyboard/davinci_keyscan.c

@@ -329,17 +329,7 @@ static struct platform_driver davinci_ks_driver = {
 	.remove	= davinci_ks_remove,
 };
 
-static int __init davinci_ks_init(void)
-{
-	return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe);
-}
-module_init(davinci_ks_init);
-
-static void __exit davinci_ks_exit(void)
-{
-	platform_driver_unregister(&davinci_ks_driver);
-}
-module_exit(davinci_ks_exit);
+module_platform_driver_probe(davinci_ks_driver, davinci_ks_probe);
 
 MODULE_AUTHOR("Miguel Aguilar");
 MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver");

drivers/input/keyboard/imx_keypad.c

@@ -448,24 +448,17 @@ static int imx_keypad_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		return -EBUSY;
-	}
-
-	input_dev = input_allocate_device();
+	input_dev = devm_input_allocate_device(&pdev->dev);
 	if (!input_dev) {
 		dev_err(&pdev->dev, "failed to allocate the input device\n");
-		error = -ENOMEM;
-		goto failed_rel_mem;
+		return -ENOMEM;
 	}
 
-	keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL);
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct imx_keypad),
+			     GFP_KERNEL);
 	if (!keypad) {
 		dev_err(&pdev->dev, "not enough memory for driver data\n");
-		error = -ENOMEM;
-		goto failed_free_input;
+		return -ENOMEM;
 	}
 
 	keypad->input_dev = input_dev;
@@ -475,18 +468,14 @@ static int imx_keypad_probe(struct platform_device *pdev)
 	setup_timer(&keypad->check_matrix_timer,
 		    imx_keypad_check_for_events, (unsigned long) keypad);
 
-	keypad->mmio_base = ioremap(res->start, resource_size(res));
-	if (keypad->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to remap I/O memory\n");
-		error = -ENOMEM;
-		goto failed_free_priv;
-	}
+	keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->mmio_base))
+		return PTR_ERR(keypad->mmio_base);
 
-	keypad->clk = clk_get(&pdev->dev, NULL);
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(keypad->clk)) {
 		dev_err(&pdev->dev, "failed to get keypad clock\n");
-		error = PTR_ERR(keypad->clk);
-		goto failed_unmap;
+		return PTR_ERR(keypad->clk);
 	}
 
 	/* Init the Input device */
@@ -502,7 +491,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
 					   keypad->keycodes, input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
-		goto failed_clock_put;
+		return error;
 	}
 
 	/* Search for rows and cols enabled */
@@ -527,60 +516,23 @@ static int imx_keypad_probe(struct platform_device *pdev)
 	imx_keypad_inhibit(keypad);
 	clk_disable_unprepare(keypad->clk);
 
-	error = request_irq(irq, imx_keypad_irq_handler, 0,
+	error = devm_request_irq(&pdev->dev, irq, imx_keypad_irq_handler, 0,
 			    pdev->name, keypad);
 	if (error) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
-		goto failed_clock_put;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	platform_set_drvdata(pdev, keypad);
 	device_init_wakeup(&pdev->dev, 1);
 
-	return 0;
-
-failed_free_irq:
-	free_irq(irq, pdev);
-failed_clock_put:
-	clk_put(keypad->clk);
-failed_unmap:
-	iounmap(keypad->mmio_base);
-failed_free_priv:
-	kfree(keypad);
-failed_free_input:
-	input_free_device(input_dev);
-failed_rel_mem:
-	release_mem_region(res->start, resource_size(res));
-	return error;
-}
-
-static int imx_keypad_remove(struct platform_device *pdev)
-{
-	struct imx_keypad *keypad = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	dev_dbg(&pdev->dev, ">%s\n", __func__);
-
-	platform_set_drvdata(pdev, NULL);
-
-	input_unregister_device(keypad->input_dev);
-
-	free_irq(keypad->irq, keypad);
-	clk_put(keypad->clk);
-
-	iounmap(keypad->mmio_base);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(keypad);
-
 	return 0;
 }
 
@@ -640,7 +592,6 @@ static struct platform_driver imx_keypad_driver = {
 		.of_match_table = of_match_ptr(imx_keypad_of_match),
 	},
 	.probe		= imx_keypad_probe,
-	.remove		= imx_keypad_remove,
 };
 module_platform_driver(imx_keypad_driver);
 

drivers/input/keyboard/nomadik-ske-keypad.c

@@ -430,17 +430,7 @@ static struct platform_driver ske_keypad_driver = {
 	.remove = ske_keypad_remove,
 };
 
-static int __init ske_keypad_init(void)
-{
-	return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
-}
-module_init(ske_keypad_init);
-
-static void __exit ske_keypad_exit(void)
-{
-	platform_driver_unregister(&ske_keypad_driver);
-}
-module_exit(ske_keypad_exit);
+module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");

drivers/input/keyboard/tegra-kbc.c

@@ -27,17 +27,19 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/clk/tegra.h>
+#include <linux/err.h>
 
-#define KBC_MAX_GPIO	24
 #define KBC_MAX_KPENT	8
 
-#define KBC_MAX_ROW	16
-#define KBC_MAX_COL	8
-#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
+/* Maximum row/column supported by Tegra KBC yet  is 16x8 */
+#define KBC_MAX_GPIO	24
+/* Maximum keys supported by Tegra KBC yet is 16 x 8*/
+#define KBC_MAX_KEY	(16 * 8)
 
 #define KBC_MAX_DEBOUNCE_CNT	0x3ffu
 
@@ -80,6 +82,12 @@ enum tegra_pin_type {
 	PIN_CFG_ROW,
 };
 
+/* Tegra KBC hw support */
+struct tegra_kbc_hw_support {
+	int max_rows;
+	int max_columns;
+};
+
 struct tegra_kbc_pin_cfg {
 	enum tegra_pin_type type;
 	unsigned char num;
@@ -108,6 +116,9 @@ struct tegra_kbc {
 	u32 wakeup_key;
 	struct timer_list timer;
 	struct clk *clk;
+	const struct tegra_kbc_hw_support *hw_support;
+	int max_keys;
+	int num_rows_and_columns;
 };
 
 static void tegra_kbc_report_released_keys(struct input_dev *input,
@@ -204,11 +215,11 @@ static void tegra_kbc_report_keys(struct tegra_kbc *kbc)
 
 	/*
 	 * If the platform uses Fn keymaps, translate keys on a Fn keypress.
-	 * Function keycodes are KBC_MAX_KEY apart from the plain keycodes.
+	 * Function keycodes are max_keys apart from the plain keycodes.
 	 */
 	if (fn_keypress) {
 		for (i = 0; i < num_down; i++) {
-			scancodes[i] += KBC_MAX_KEY;
+			scancodes[i] += kbc->max_keys;
 			keycodes[i] = kbc->keycode[scancodes[i]];
 		}
 	}
@@ -315,7 +326,7 @@ static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter)
 	/* Either mask all keys or none. */
 	rst_val = (filter && !kbc->wakeup) ? ~0 : 0;
 
-	for (i = 0; i < KBC_MAX_ROW; i++)
+	for (i = 0; i < kbc->hw_support->max_rows; i++)
 		writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4);
 }
 
@@ -452,7 +463,7 @@ static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc,
 
 		switch (pin_cfg->type) {
 		case PIN_CFG_ROW:
-			if (pin_cfg->num >= KBC_MAX_ROW) {
+			if (pin_cfg->num >= kbc->hw_support->max_rows) {
 				dev_err(kbc->dev,
 					"pin_cfg[%d]: invalid row number %d\n",
 					i, pin_cfg->num);
@@ -462,7 +473,7 @@ static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc,
 			break;
 
 		case PIN_CFG_COL:
-			if (pin_cfg->num >= KBC_MAX_COL) {
+			if (pin_cfg->num >= kbc->hw_support->max_columns) {
 				dev_err(kbc->dev,
 					"pin_cfg[%d]: invalid column number %d\n",
 					i, pin_cfg->num);
@@ -520,6 +531,18 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
 	}
 	num_cols = proplen / sizeof(u32);
 
+	if (num_rows > kbc->hw_support->max_rows) {
+		dev_err(kbc->dev,
+			"Number of rows is more than supported by hardware\n");
+		return -EINVAL;
+	}
+
+	if (num_cols > kbc->hw_support->max_columns) {
+		dev_err(kbc->dev,
+			"Number of cols is more than supported by hardware\n");
+		return -EINVAL;
+	}
+
 	if (!of_get_property(np, "linux,keymap", &proplen)) {
 		dev_err(kbc->dev, "property linux,keymap not found\n");
 		return -ENOENT;
@@ -532,7 +555,7 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
 	}
 
 	/* Set all pins as non-configured */
-	for (i = 0; i < KBC_MAX_GPIO; i++)
+	for (i = 0; i < kbc->num_rows_and_columns; i++)
 		kbc->pin_cfg[i].type = PIN_CFG_IGNORE;
 
 	ret = of_property_read_u32_array(np, "nvidia,kbc-row-pins",
@@ -562,6 +585,24 @@ static int tegra_kbc_parse_dt(struct tegra_kbc *kbc)
 	return 0;
 }
 
+static const struct tegra_kbc_hw_support tegra20_kbc_hw_support = {
+	.max_rows	= 16,
+	.max_columns	= 8,
+};
+
+static const struct tegra_kbc_hw_support tegra11_kbc_hw_support = {
+	.max_rows	= 11,
+	.max_columns	= 8,
+};
+
+static const struct of_device_id tegra_kbc_of_match[] = {
+	{ .compatible = "nvidia,tegra114-kbc", .data = &tegra11_kbc_hw_support},
+	{ .compatible = "nvidia,tegra30-kbc", .data = &tegra20_kbc_hw_support},
+	{ .compatible = "nvidia,tegra20-kbc", .data = &tegra20_kbc_hw_support},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_kbc_of_match);
+
 static int tegra_kbc_probe(struct platform_device *pdev)
 {
 	struct tegra_kbc *kbc;
@@ -570,7 +611,10 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 	int num_rows = 0;
 	unsigned int debounce_cnt;
 	unsigned int scan_time_rows;
-	unsigned int keymap_rows = KBC_MAX_KEY;
+	unsigned int keymap_rows;
+	const struct of_device_id *match;
+
+	match = of_match_device(of_match_ptr(tegra_kbc_of_match), &pdev->dev);
 
 	kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL);
 	if (!kbc) {
@@ -579,6 +623,12 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 	}
 
 	kbc->dev = &pdev->dev;
+	kbc->hw_support = match->data;
+	kbc->max_keys = kbc->hw_support->max_rows *
+				kbc->hw_support->max_columns;
+	kbc->num_rows_and_columns = kbc->hw_support->max_rows +
+					kbc->hw_support->max_columns;
+	keymap_rows = kbc->max_keys;
 	spin_lock_init(&kbc->lock);
 
 	err = tegra_kbc_parse_dt(kbc);
@@ -608,11 +658,9 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 
 	setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc);
 
-	kbc->mmio = devm_request_and_ioremap(&pdev->dev, res);
-	if (!kbc->mmio) {
-		dev_err(&pdev->dev, "Cannot request memregion/iomap address\n");
-		return -EBUSY;
-	}
+	kbc->mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kbc->mmio))
+		return PTR_ERR(kbc->mmio);
 
 	kbc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(kbc->clk)) {
@@ -641,7 +689,8 @@ static int tegra_kbc_probe(struct platform_device *pdev)
 		keymap_rows *= 2;
 
 	err = matrix_keypad_build_keymap(kbc->keymap_data, NULL,
-					 keymap_rows, KBC_MAX_COL,
+					 keymap_rows,
+					 kbc->hw_support->max_columns,
 					 kbc->keycode, kbc->idev);
 	if (err) {
 		dev_err(&pdev->dev, "failed to setup keymap\n");
@@ -767,12 +816,6 @@ static int tegra_kbc_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume);
 
-static const struct of_device_id tegra_kbc_of_match[] = {
-	{ .compatible = "nvidia,tegra20-kbc", },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, tegra_kbc_of_match);
-
 static struct platform_driver tegra_kbc_driver = {
 	.probe		= tegra_kbc_probe,
 	.driver	= {

drivers/input/misc/Kconfig

@@ -590,6 +590,16 @@ config INPUT_ADXL34X_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl34x-spi.
 
+config INPUT_IMS_PCU
+	tristate "IMS Passenger Control Unit driver"
+	depends on USB
+	depends on LEDS_CLASS
+	help
+	  Say Y here if you have system with IMS Rave Passenger Control Unit.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ims_pcu.
+
 config INPUT_CMA3000
 	tristate "VTI CMA3000 Tri-axis accelerometer"
 	help

drivers/input/misc/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o

drivers/input/misc/ad714x-i2c.c

@@ -13,7 +13,7 @@
 #include <linux/pm.h>
 #include "ad714x.h"
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ad714x_i2c_suspend(struct device *dev)
 {
 	return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));

drivers/input/misc/ad714x-spi.c

@@ -16,7 +16,7 @@
 #define AD714x_SPI_CMD_PREFIX      0xE000   /* bits 15:11 */
 #define AD714x_SPI_READ            BIT(10)
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ad714x_spi_suspend(struct device *dev)
 {
 	return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));

drivers/input/misc/adxl34x-i2c.c

@@ -105,7 +105,7 @@ static int adxl34x_i2c_remove(struct i2c_client *client)
 	return adxl34x_remove(ac);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int adxl34x_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);

drivers/input/misc/adxl34x-spi.c

@@ -89,16 +89,16 @@ static int adxl34x_spi_probe(struct spi_device *spi)
 
 static int adxl34x_spi_remove(struct spi_device *spi)
 {
-	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+	struct adxl34x *ac = spi_get_drvdata(spi);
 
 	return adxl34x_remove(ac);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int adxl34x_spi_suspend(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
-	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+	struct adxl34x *ac = spi_get_drvdata(spi);
 
 	adxl34x_suspend(ac);
 
@@ -108,7 +108,7 @@ static int adxl34x_spi_suspend(struct device *dev)
 static int adxl34x_spi_resume(struct device *dev)
 {
 	struct spi_device *spi = to_spi_device(dev);
-	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
+	struct adxl34x *ac = spi_get_drvdata(spi);
 
 	adxl34x_resume(ac);
 

drivers/input/misc/mma8450.c

@@ -123,9 +123,9 @@ static void mma8450_poll(struct input_polled_dev *dev)
 	if (ret < 0)
 		return;
 
-	x = ((buf[1] << 4) & 0xff0) | (buf[0] & 0xf);
-	y = ((buf[3] << 4) & 0xff0) | (buf[2] & 0xf);
-	z = ((buf[5] << 4) & 0xff0) | (buf[4] & 0xf);
+	x = ((int)(s8)buf[1] << 4) | (buf[0] & 0xf);
+	y = ((int)(s8)buf[3] << 4) | (buf[2] & 0xf);
+	z = ((int)(s8)buf[5] << 4) | (buf[4] & 0xf);
 
 	input_report_abs(dev->input, ABS_X, x);
 	input_report_abs(dev->input, ABS_Y, y);