Merge 4.9-rc7 into usb-next

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman
2016-11-28 08:34:10 +01:00
545 changed files with 6309 additions and 3056 deletions
@@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.
Required properties:
- compatible : should be "aspeed,ast2400-bt-bmc"
- compatible : should be "aspeed,ast2400-ibt-bmc"
- reg: physical address and size of the registers
Optional properties:
@@ -17,7 +17,7 @@ Optional properties:
Example:
ibt@1e789140 {
compatible = "aspeed,ast2400-bt-bmc";
compatible = "aspeed,ast2400-ibt-bmc";
reg = <0x1e789140 0x18>;
interrupts = <8>;
};
@@ -12,7 +12,7 @@ Required properties:
Optional properties:
- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
- ti,jack_detection: Need to be present if the board capable to detect jack
- ti,jack-detection: Need to be present if the board capable to detect jack
insertion, removal.
Available audio endpoints for the audio-routing table:
+2 -2
View File
@@ -326,7 +326,7 @@ Two parent-locked sibling muxes
This is a good topology.
.--------.
.--------.
.----------. .--| dev D1 |
| parent- |--' '--------'
.--| locked | .--------.
@@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
This is a good topology.
.--------.
.--------.
.----------. .--| dev D1 |
| mux- |--' '--------'
.--| locked | .--------.
+2 -1
View File
@@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
Switch tagging protocols
------------------------
DSA currently supports 4 different tagging protocols, and a tag-less mode as
DSA currently supports 5 different tagging protocols, and a tag-less mode as
well. The different protocols are implemented in:
net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
net/dsa/tag_dsa.c: Marvell's original DSA tag
net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
The exact format of the tag protocol is vendor specific, but in general, they
all contain something which:
+11
View File
@@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
such as migration.
When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
set of bits that KVM can return in struct kvm_clock_data's flag member.
The only flag defined now is KVM_CLOCK_TSC_STABLE. If set, the returned
value is the exact kvmclock value seen by all VCPUs at the instant
when KVM_GET_CLOCK was called. If clear, the returned value is simply
CLOCK_MONOTONIC plus a constant offset; the offset can be modified
with KVM_SET_CLOCK. KVM will try to make all VCPUs follow this clock,
but the exact value read by each VCPU could differ, because the host
TSC is not stable.
struct kvm_clock_data {
__u64 clock; /* kvmclock current value */
__u32 flags;
+12
View File
@@ -77,6 +77,7 @@ Descriptions of section entries:
Q: Patchwork web based patch tracking system site
T: SCM tree type and location.
Type is one of: git, hg, quilt, stgit, topgit
B: Bug tracking system location.
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
@@ -281,6 +282,7 @@ L: linux-acpi@vger.kernel.org
W: https://01.org/linux-acpi
Q: https://patchwork.kernel.org/project/linux-acpi/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
B: https://bugzilla.kernel.org
S: Supported
F: drivers/acpi/
F: drivers/pnp/pnpacpi/
@@ -304,6 +306,8 @@ W: https://acpica.org/
W: https://github.com/acpica/acpica/
Q: https://patchwork.kernel.org/project/linux-acpi/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
B: https://bugzilla.kernel.org
B: https://bugs.acpica.org
S: Supported
F: drivers/acpi/acpica/
F: include/acpi/
@@ -313,6 +317,7 @@ ACPI FAN DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: https://01.org/linux-acpi
B: https://bugzilla.kernel.org
S: Supported
F: drivers/acpi/fan.c
@@ -328,6 +333,7 @@ ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: https://01.org/linux-acpi
B: https://bugzilla.kernel.org
S: Supported
F: drivers/acpi/*thermal*
@@ -335,6 +341,7 @@ ACPI VIDEO DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
W: https://01.org/linux-acpi
B: https://bugzilla.kernel.org
S: Supported
F: drivers/acpi/acpi_video.c
@@ -5663,6 +5670,7 @@ HIBERNATION (aka Software Suspend, aka swsusp)
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
M: Pavel Machek <pavel@ucw.cz>
L: linux-pm@vger.kernel.org
B: https://bugzilla.kernel.org
S: Supported
F: arch/x86/power/
F: drivers/base/power/
@@ -7084,6 +7092,7 @@ F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Richard Purdie <rpurdie@rpsys.net>
M: Jacek Anaszewski <j.anaszewski@samsung.com>
M: Pavel Machek <pavel@ucw.cz>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
S: Maintained
@@ -8057,6 +8066,7 @@ F: drivers/infiniband/hw/mlx4/
F: include/linux/mlx4/
MELLANOX MLX5 core VPI driver
M: Saeed Mahameed <saeedm@mellanox.com>
M: Matan Barak <matanb@mellanox.com>
M: Leon Romanovsky <leonro@mellanox.com>
L: netdev@vger.kernel.org
@@ -9622,6 +9632,7 @@ POWER MANAGEMENT CORE
M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
L: linux-pm@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
B: https://bugzilla.kernel.org
S: Supported
F: drivers/base/power/
F: include/linux/pm.h
@@ -11611,6 +11622,7 @@ M: "Rafael J. Wysocki" <rjw@rjwysocki.net>
M: Len Brown <len.brown@intel.com>
M: Pavel Machek <pavel@ucw.cz>
L: linux-pm@vger.kernel.org
B: https://bugzilla.kernel.org
S: Supported
F: Documentation/power/
F: arch/x86/kernel/acpi/
+4 -3
View File
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc7
NAME = Psychotic Stoned Sheep
# *DOCUMENTATION*
@@ -399,11 +399,12 @@ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-Werror-implicit-function-declaration \
-Wno-format-security \
-std=gnu89
-std=gnu89 $(call cc-option,-fno-PIE)
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
+7 -7
View File
@@ -64,8 +64,8 @@
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -76,8 +76,8 @@
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
@@ -100,14 +100,14 @@
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};
+5
View File
@@ -13,6 +13,11 @@
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
regulator-name = "vwl1271";
+2 -2
View File
@@ -13,9 +13,9 @@
};
};
memory@0 {
memory@80000000 {
device_type = "memory";
reg = <0 0>;
reg = <0x80000000 0>;
};
leds {
+4 -3
View File
@@ -124,6 +124,7 @@
compatible = "ti,abe-twl6040";
ti,model = "omap5-uevm";
ti,jack-detection;
ti,mclk-freq = <19200000>;
ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
ti,backup-battery-charge-high-current;
};
gpadc {
gpadc: gpadc {
compatible = "ti,palmas-gpadc";
interrupts = <18 0
16 0
@@ -475,8 +476,8 @@
smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
+1 -1
View File
@@ -74,7 +74,7 @@
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
cs-gpio = <&pio30 3 0>;
cs-gpios = <&pio30 3 0>;
status = "okay";
};
+4
View File
@@ -282,11 +282,15 @@
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
-1
View File
@@ -8,7 +8,6 @@ generic-y += early_ioremap.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h
generic-y += export.h
generic-y += ioctl.h
generic-y += ipcbuf.h
generic-y += irq_regs.h
+1 -1
View File
@@ -33,7 +33,7 @@ endif
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_FIQ) += fiq.o fiqasm.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
+183
View File
@@ -0,0 +1,183 @@
/*
* linux/arch/arm/kernel/armksyms.c
*
* Copyright (C) 2000 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/cryptohash.h>
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/arm-smccc.h>
#include <asm/checksum.h>
#include <asm/ftrace.h>
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
* doesn't really matter since they're not versioned).
*/
extern void __ashldi3(void);
extern void __ashrdi3(void);
extern void __divsi3(void);
extern void __lshrdi3(void);
extern void __modsi3(void);
extern void __muldi3(void);
extern void __ucmpdi2(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __do_div64(void);
extern void __bswapsi2(void);
extern void __bswapdi2(void);
extern void __aeabi_idiv(void);
extern void __aeabi_idivmod(void);
extern void __aeabi_lasr(void);
extern void __aeabi_llsl(void);
extern void __aeabi_llsr(void);
extern void __aeabi_lmul(void);
extern void __aeabi_uidiv(void);
extern void __aeabi_uidivmod(void);
extern void __aeabi_ulcmp(void);
extern void fpundefinstr(void);
void mmioset(void *, unsigned int, size_t);
void mmiocpy(void *, const void *, size_t);
/* platform dependent support */
EXPORT_SYMBOL(arm_delay_ops);
/* networking */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_from_user);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
EXPORT_SYMBOL(__csum_ipv6_magic);
/* io */
#ifndef __raw_readsb
EXPORT_SYMBOL(__raw_readsb);
#endif
#ifndef __raw_readsw
EXPORT_SYMBOL(__raw_readsw);
#endif
#ifndef __raw_readsl
EXPORT_SYMBOL(__raw_readsl);
#endif
#ifndef __raw_writesb
EXPORT_SYMBOL(__raw_writesb);
#endif
#ifndef __raw_writesw
EXPORT_SYMBOL(__raw_writesw);
#endif
#ifndef __raw_writesl
EXPORT_SYMBOL(__raw_writesl);
#endif
/* string / mem functions */
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
EXPORT_SYMBOL(mmioset);
EXPORT_SYMBOL(mmiocpy);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(arm_copy_from_user);
EXPORT_SYMBOL(arm_copy_to_user);
EXPORT_SYMBOL(arm_clear_user);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
EXPORT_SYMBOL(__get_user_8);
#ifdef __ARMEB__
EXPORT_SYMBOL(__get_user_64t_1);
EXPORT_SYMBOL(__get_user_64t_2);
EXPORT_SYMBOL(__get_user_64t_4);
EXPORT_SYMBOL(__get_user_32t_8);
#endif
EXPORT_SYMBOL(__put_user_1);
EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
#endif
/* gcc lib functions */
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__divsi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__modsi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__ucmpdi2);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__do_div64);
EXPORT_SYMBOL(__bswapsi2);
EXPORT_SYMBOL(__bswapdi2);
#ifdef CONFIG_AEABI
EXPORT_SYMBOL(__aeabi_idiv);
EXPORT_SYMBOL(__aeabi_idivmod);
EXPORT_SYMBOL(__aeabi_lasr);
EXPORT_SYMBOL(__aeabi_llsl);
EXPORT_SYMBOL(__aeabi_llsr);
EXPORT_SYMBOL(__aeabi_lmul);
EXPORT_SYMBOL(__aeabi_uidiv);
EXPORT_SYMBOL(__aeabi_uidivmod);
EXPORT_SYMBOL(__aeabi_ulcmp);
#endif
/* bitops */
EXPORT_SYMBOL(_set_bit);
EXPORT_SYMBOL(_test_and_set_bit);
EXPORT_SYMBOL(_clear_bit);
EXPORT_SYMBOL(_test_and_clear_bit);
EXPORT_SYMBOL(_change_bit);
EXPORT_SYMBOL(_test_and_change_bit);
EXPORT_SYMBOL(_find_first_zero_bit_le);
EXPORT_SYMBOL(_find_next_zero_bit_le);
EXPORT_SYMBOL(_find_first_bit_le);
EXPORT_SYMBOL(_find_next_bit_le);
#ifdef __ARMEB__
EXPORT_SYMBOL(_find_first_zero_bit_be);
EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_OLD_MCOUNT
EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
EXPORT_SYMBOL(__pv_phys_pfn_offset);
EXPORT_SYMBOL(__pv_offset);
#endif
#ifdef CONFIG_HAVE_ARM_SMCCC
EXPORT_SYMBOL(arm_smccc_smc);
EXPORT_SYMBOL(arm_smccc_hvc);
#endif
-3
View File
@@ -7,7 +7,6 @@
#include <asm/assembler.h>
#include <asm/ftrace.h>
#include <asm/unwind.h>
#include <asm/export.h>
#include "entry-header.S"
@@ -154,7 +153,6 @@ ENTRY(mcount)
__mcount _old
#endif
ENDPROC(mcount)
EXPORT_SYMBOL(mcount)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller_old)
@@ -207,7 +205,6 @@ UNWIND(.fnstart)
#endif
UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
EXPORT_SYMBOL(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)
-3
View File
@@ -22,7 +22,6 @@
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/pgtable.h>
#include <asm/export.h>
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
#include CONFIG_DEBUG_LL_INCLUDE
@@ -728,8 +727,6 @@ __pv_phys_pfn_offset:
__pv_offset:
.quad 0
.size __pv_offset, . -__pv_offset
EXPORT_SYMBOL(__pv_phys_pfn_offset)
EXPORT_SYMBOL(__pv_offset)
#endif
#include "head-common.S"
-3
View File
@@ -16,7 +16,6 @@
#include <asm/opcodes-sec.h>
#include <asm/opcodes-virt.h>
#include <asm/unwind.h>
#include <asm/export.h>
/*
* Wrap c macros in asm macros to delay expansion until after the
@@ -52,7 +51,6 @@ UNWIND( .fnend)
ENTRY(arm_smccc_smc)
SMCCC SMCCC_SMC
ENDPROC(arm_smccc_smc)
EXPORT_SYMBOL(arm_smccc_smc)
/*
* void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
@@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc)
ENTRY(arm_smccc_hvc)
SMCCC SMCCC_HVC
ENDPROC(arm_smccc_hvc)
EXPORT_SYMBOL(arm_smccc_hvc)
+20
View File
@@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
void dump_backtrace_stm(u32 *stack, u32 instruction)
{
char str[80], *p;
unsigned int x;
int reg;
for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
if (instruction & BIT(reg)) {
p += sprintf(p, " r%d:%08x", reg, *stack--);
if (++x == 6) {
x = 0;
p = str;
printk("%s\n", str);
}
}
}
if (p != str)
printk("%s\n", str);
}
#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of

Some files were not shown because too many files have changed in this diff Show More