Merge tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - move power supply drivers to drivers/power/supply
 - unify location of power supply DT documentation
 - tps65217-charger: IRQ support
 - act8945a-charger: misc. cleanups & improvements
 - sbs-battery cleanup
 - fix users of deprecated create_singlethread_workqueue()
 - misc fixes.

* tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (46 commits)
  power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime update
  power: supply: sbs-battery: Cleanup removal of chip->pdata
  power: reset: st: Remove obsolete platforms from dt doc
  power: reset: st-poweroff: Remove obsolete platforms.
  power: reset: zx-reboot: Unmap region obtained by of_iomap
  power: reset: xgene-reboot: Unmap region obtained by of_iomap
  power: supply: ab8500: cleanup with list_first_entry_or_null()
  power: reset: add in missing white space in error message text
  sbs-battery: make writes to ManufacturerAccess optional
  power: bq24257: Fix use of uninitialized pointer bq->charger
  power: supply: sbs-battery: simplify DT parsing
  power: supply: bq24735-charger: Request status GPIO with initial input setup
  power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detect
  power: supply: act8945a_charger: Add max current property
  power: supply: act8945a_charger: Add capacity level property
  doc: bindings: power: act8945a-charger: Update properties.
  power: supply: act8945a_charger: Fix the power supply type
  power: supply: act8945a_charger: Add status change update support
  power: supply: act8945a_charger: Improve state handling
  power: supply: act8945a_charger: Remove "battery_temperature"
  ...

CREDITS

@@ -1090,6 +1090,10 @@ S: 6350 Stoneridge Mall Road
 S: Pleasanton, CA 94588
 S: USA
 
+N: Dmitry Eremin-Solenikov
+E: dbaryshkov@gmail.com
+D: Power Supply Maintainer from v3.14 - v3.15
+
 N: Doug Evans
 E: dje@cygnus.com
 D: Wrote Xenix FS (part of standard kernel since 0.99.15)

Documentation/ABI/testing/sysfs-class-power

@@ -22,7 +22,7 @@ Description:
 What:		/sys/class/power_supply/max14577-charger/device/fast_charge_timer
 Date:		October 2014
 KernelVersion:	3.18.0
-Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
 Description:
 		This entry shows and sets the maximum time the max14577
 		charger operates in fast-charge mode. When the timer expires
@@ -36,7 +36,7 @@ Description:
 What:		/sys/class/power_supply/max77693-charger/device/fast_charge_timer
 Date:		January 2015
 KernelVersion:	3.19.0
-Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
 Description:
 		This entry shows and sets the maximum time the max77693
 		charger operates in fast-charge mode. When the timer expires
@@ -50,7 +50,7 @@ Description:
 What:		/sys/class/power_supply/max77693-charger/device/top_off_threshold_current
 Date:		January 2015
 KernelVersion:	3.19.0
-Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
 Description:
 		This entry shows and sets the charging current threshold for
 		entering top-off charging mode. When charging current in fast
@@ -65,7 +65,7 @@ Description:
 What:		/sys/class/power_supply/max77693-charger/device/top_off_timer
 Date:		January 2015
 KernelVersion:	3.19.0
-Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Contact:	Krzysztof Kozlowski <krzk@kernel.org>
 Description:
 		This entry shows and sets the maximum time the max77693
 		charger operates in top-off charge mode. When the timer expires

Documentation/devicetree/bindings/power/act8945a-charger.txt

@@ -1,35 +0,0 @@
-Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
- - active-semi,chglev-gpios: charge current level phandle with args
-   as described in ../gpio/gpio.txt.
-
-Optional properties:
- - active-semi,check-battery-temperature: boolean to check the battery
-   temperature or not.
- - active-semi,input-voltage-threshold-microvolt: unit: mV;
-   Specifies the charger's input over-voltage threshold value;
-   The value can be: 6600, 7000, 7500, 8000; default: 6600
- - active-semi,precondition-timeout: unit: minutes;
-   Specifies the charger's PRECONDITION safety timer setting value;
-   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
-   default: 40.
- - active-semi,total-timeout: unit: hours;
-   Specifies the charger's total safety timer setting value;
-   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
-   default: 3.
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_charger_chglev>;
-		active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-		active-semi,input-voltage-threshold-microvolt = <6600>;
-		active-semi,precondition-timeout = <40>;
-		active-semi,total-timeout = <3>;
-	};

Documentation/devicetree/bindings/power/reset/st-reset.txt

@@ -1,11 +1,12 @@
 *Device-Tree bindings for ST SW reset functionality
 
 Required properties:
-- compatible: should be "st,<chip>-restart".
+- compatible: should be "stih407-restart".
 - st,syscfg: should be a phandle of the syscfg node.
 
 Example node:
 	restart {
-		compatible = "st,stih416-restart";
-		st,syscfg = <&syscfg_sbc>;
+		compatible = "st,stih407-restart";
+		st,syscfg = <&syscfg_sbc_reg>;
+		status = "okay";
 	};

Documentation/devicetree/bindings/power/supply/act8945a-charger.txt

@@ -0,0 +1,48 @@
+Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
+
+Required properties:
+ - compatible: "active-semi,act8945a-charger".
+ - active-semi,chglev-gpios: charge current level phandle with args
+   as described in ../gpio/gpio.txt.
+ - active-semi,lbo-gpios: specify the low battery voltage detect phandle
+   with args as as described in ../gpio/gpio.txt.
+ - interrupts: <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.
+ - interrupt-parent: the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Optional properties:
+ - active-semi,input-voltage-threshold-microvolt: unit: mV;
+   Specifies the charger's input over-voltage threshold value;
+   The value can be: 6600, 7000, 7500, 8000; default: 6600
+ - active-semi,precondition-timeout: unit: minutes;
+   Specifies the charger's PRECONDITION safety timer setting value;
+   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
+   default: 40.
+ - active-semi,total-timeout: unit: hours;
+   Specifies the charger's total safety timer setting value;
+   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
+   default: 3.
+
+Example:
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		status = "okay";
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <45 GPIO_ACTIVE_LOW>;
+
+			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+			status = "okay";
+		};
+	};