Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux into drm-misc-next

Main pull request for drm for 4.10 kernel - resync drm-misc with full
4.10 state (2 new drivers) so that we can start pulling in all the
refactorings for 4.11!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt

@@ -0,0 +1,112 @@
+Amlogic Meson Display Controller
+================================
+
+The Amlogic Meson Display controller is composed of several components
+that are going to be documented below:
+
+DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+   | vd1   _______     _____________    _________________     |               |
+D  |-------|      |----|            |   |                |    |   HDMI PLL    |
+D  | vd2   | VIU  |    | Video Post |   | Video Encoders |<---|-----VCLK      |
+R  |-------|      |----| Processing |   |                |    |               |
+   | osd2  |      |    |            |---| Enci ----------|----|-----VDAC------|
+R  |-------| CSC  |----| Scalers    |   | Encp ----------|----|----HDMI-TX----|
+A  | osd1  |      |    | Blenders   |   | Encl ----------|----|---------------|
+M  |-------|______|----|____________|   |________________|    |               |
+___|__________________________________________________________|_______________|
+
+
+VIU: Video Input Unit
+---------------------
+
+The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+This part is also in charge of the CSC (Colorspace Conversion).
+It can handle 2 OSD Planes and 2 Video Planes.
+
+VPP: Video Post Processing
+--------------------------
+
+The Video Post Processing is in charge of the scaling and blending of the
+various planes into a single pixel stream.
+There is a special "pre-blending" used by the video planes with a dedicated
+scaler and a "post-blending" to merge with the OSD Planes.
+The OSD planes also have a dedicated scaler for one of the OSD.
+
+VENC: Video Encoders
+--------------------
+
+The VENC is composed of the multiple pixel encoders :
+ - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+ - ENCP : Progressive Video Encoder for HDMI
+ - ENCL : LCD LVDS Encoder
+The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+tree and provides the scanout clock to the VPP and VIU.
+The ENCI is connected to a single VDAC for Composite Output.
+The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+Device Tree Bindings:
+---------------------
+
+VPU: Video Processing Unit
+--------------------------
+
+Required properties:
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,meson-gxbb-vpu"
+	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
+	- GXM (S912) : "amlogic,meson-gxm-vpu"
+	followed by the common "amlogic,meson-gx-vpu"
+- reg: base address and size of he following memory-mapped regions :
+	- vpu
+	- hhi
+	- dmc
+- reg-names: should contain the names of the previous memory regions
+- interrupts: should contain the VENC Vsync interrupt number
+
+Required nodes:
+
+The connections to the VPU output video ports are modeled using the OF graph
+bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+The following table lists for each supported model the port number
+corresponding to each VPU output.
+
+		Port 0		Port 1
+-----------------------------------------
+ S905 (GXBB)	CVBS VDAC	HDMI-TX
+ S905X (GXL)	CVBS VDAC	HDMI-TX
+ S905D (GXL)	CVBS VDAC	HDMI-TX
+ S912 (GXM)	CVBS VDAC	HDMI-TX
+
+Example:
+
+tv-connector {
+	compatible = "composite-video-connector";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&cvbs_vdac_out>;
+		};
+	};
+};
+
+vpu: vpu@d0100000 {
+	compatible = "amlogic,meson-gxbb-vpu";
+	reg = <0x0 0xd0100000 0x0 0x100000>,
+	      <0x0 0xc883c000 0x0 0x1000>,
+	      <0x0 0xc8838000 0x0 0x1000>;
+	reg-names = "vpu", "hhi", "dmc";
+	interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* CVBS VDAC output port */
+	port@0 {
+		reg = <0>;
+
+		cvbs_vdac_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+		};
+	};
+};

Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt

@@ -43,6 +43,13 @@ Required properties for DPI:
 - port:		Port node with a single endpoint connecting to the panel
 		  device, as defined in [1]
 
+Required properties for VEC:
+- compatible:	Should be "brcm,bcm2835-vec"
+- reg:		Physical base address and length of the registers
+- clocks:	The core clock the unit runs on
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Required properties for V3D:
 - compatible:	Should be "brcm,bcm2835-v3d"
 - reg:		Physical base address and length of the V3D's registers
@@ -92,6 +99,13 @@ dpi: dpi@7e208000 {
 	};
 };
 
+vec: vec@7e806000 {
+	compatible = "brcm,bcm2835-vec";
+	reg = <0x7e806000 0x1000>;
+	clocks = <&clocks BCM2835_CLOCK_VEC>;
+	interrupts = <2 27>;
+};
+
 v3d: v3d@7ec00000 {
 	compatible = "brcm,bcm2835-v3d";
 	reg = <0x7ec00000 0x1000>;

Documentation/devicetree/bindings/display/mxsfb.txt

@@ -1,20 +1,57 @@
 * Freescale MXS LCD Interface (LCDIF)
 
+New bindings:
+=============
 Required properties:
-- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
-  imx23 and imx28.
-- reg: Address and length of the register set for lcdif
-- interrupts: Should contain lcdif interrupts
-- display : phandle to display node (see below for details)
+- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
+		Should be "fsl,imx28-lcdif" for i.MX28.
+		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+- reg:		Address and length of the register set for LCDIF
+- interrupts:	Should contain LCDIF interrupt
+- clocks:	A list of phandle + clock-specifier pairs, one for each
+		entry in 'clock-names'.
+- clock-names:	A list of clock names. For MXSFB it should contain:
+    - "pix" for the LCDIF block clock
+    - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
+
+Required sub-nodes:
+  - port: The connection to an encoder chip.
+
+Example:
+
+	lcdif1: display-controller@2220000 {
+		compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
+		reg = <0x02220000 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+			 <&clks IMX6SX_CLK_LCDIF_APB>,
+			 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+		clock-names = "pix", "axi", "disp_axi";
+
+		port {
+			parallel_out: endpoint {
+				remote-endpoint = <&panel_in_parallel>;
+			};
+		};
+	};
+
+Deprecated bindings:
+====================
+Required properties:
+- compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
+		Should be "fsl,imx28-lcdif" for i.MX28.
+- reg:		Address and length of the register set for LCDIF
+- interrupts:	Should contain LCDIF interrupts
+- display:	phandle to display node (see below for details)
 
 * display node
 
 Required properties:
-- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
-- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
+- bits-per-pixel:	<16> for RGB565, <32> for RGB888/666.
+- bus-width:		number of data lines.  Could be <8>, <16>, <18> or <24>.
 
 Required sub-node:
-- display-timings : Refer to binding doc display-timing.txt for details.
+- display-timings:	Refer to binding doc display-timing.txt for details.
 
 Examples:
 

Documentation/devicetree/bindings/display/panel/auo,g133han01.txt

@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g133han01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,g185han01.txt

@@ -0,0 +1,7 @@
+AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g185han01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/auo,t215hvn01.txt

@@ -0,0 +1,7 @@
+AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,t215hvn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/chunghwa,claa070wp03xg.txt

@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa070wp03xg"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/nvd,9128.txt

@@ -0,0 +1,7 @@
+New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+
+Required properties:
+- compatible: should be "nvd,9128"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt

@@ -0,0 +1,36 @@
+Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq150x1lg11"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+
+Optional properties:
+- backlight: phandle of the backlight device
+- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
+- sellvds-gpios: a single GPIO for the SELLVDS pin.
+
+If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
+pins are assumed to be handled appropriately by the hardware.
+
+Example:
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000>;                      /* VBR */
+
+		brightness-levels = <0 20 40 60 80 100>;
+		default-brightness-level = <2>;
+
+		power-supply = <&vdd_12v_reg>;               /* VDD */
+		enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
+	};
+
+	panel {
+		compatible = "sharp,lq150x1lg11";
+
+		power-supply = <&vcc_3v3_reg>;               /* VCC */
+
+		backlight = <&backlight>;
+		rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
+		sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -187,6 +187,7 @@ netgear	NETGEAR
 netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
 netxeon		Shenzhen Netxeon Technology CO., LTD
 newhaven	Newhaven Display International
+nvd	New Vision Display
 nintendo	Nintendo
 nokia	Nokia
 nuvoton	Nuvoton Technology Corporation

MAINTAINERS

@@ -4121,6 +4121,15 @@ S:	Supported
 F:	drivers/gpu/drm/sun4i/
 F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
 
+DRM DRIVERS FOR AMLOGIC SOCS
+M:	Neil Armstrong <narmstrong@baylibre.com>
+L:	dri-devel@lists.freedesktop.org
+L:	linux-amlogic@lists.infradead.org
+W:	http://linux-meson.com/
+S:	Supported
+F:	drivers/gpu/drm/meson/
+F:	Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+
 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
 M:	Joonyoung Shim <jy0922.shim@samsung.com>
@@ -8319,6 +8328,12 @@ T:	git git://linuxtv.org/mkrufky/tuners.git
 S:	Maintained
 F:	drivers/media/tuners/mxl5007t.*
 
+MXSFB DRM DRIVER
+M:	Marek Vasut <marex@denx.de>
+S:	Supported
+F:	drivers/gpu/drm/mxsfb/
+F:	Documentation/devicetree/bindings/display/mxsfb-drm.txt
+
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 M:	Hyong-Youb Kim <hykim@myri.com>
 L:	netdev@vger.kernel.org

drivers/gpu/drm/Kconfig

@@ -240,6 +240,10 @@ source "drivers/gpu/drm/mediatek/Kconfig"
 
 source "drivers/gpu/drm/zte/Kconfig"
 
+source "drivers/gpu/drm/mxsfb/Kconfig"
+
+source "drivers/gpu/drm/meson/Kconfig"
+
 # Keep legacy drivers last
 
 menuconfig DRM_LEGACY

drivers/gpu/drm/Makefile

@@ -81,6 +81,7 @@ obj-$(CONFIG_DRM_TEGRA) += tegra/
 obj-$(CONFIG_DRM_STI) += sti/
 obj-$(CONFIG_DRM_IMX) += imx/
 obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
+obj-$(CONFIG_DRM_MESON)	+= meson/
 obj-y			+= i2c/
 obj-y			+= panel/
 obj-y			+= bridge/
@@ -89,3 +90,4 @@ obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
 obj-$(CONFIG_DRM_ARCPGU)+= arc/
 obj-y			+= hisilicon/
 obj-$(CONFIG_DRM_ZTE)	+= zte/
+obj-$(CONFIG_DRM_MXSFB)	+= mxsfb/

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -842,6 +842,8 @@ struct amdgpu_gfx_funcs {
 	uint64_t (*get_gpu_clock_counter)(struct amdgpu_device *adev);
 	void (*select_se_sh)(struct amdgpu_device *adev, u32 se_num, u32 sh_num, u32 instance);
 	void (*read_wave_data)(struct amdgpu_device *adev, uint32_t simd, uint32_t wave, uint32_t *dst, int *no_fields);
+	void (*read_wave_vgprs)(struct amdgpu_device *adev, uint32_t simd, uint32_t wave, uint32_t thread, uint32_t start, uint32_t size, uint32_t *dst);
+	void (*read_wave_sgprs)(struct amdgpu_device *adev, uint32_t simd, uint32_t wave, uint32_t start, uint32_t size, uint32_t *dst);
 };
 
 struct amdgpu_gfx {
@@ -1330,6 +1332,7 @@ struct amdgpu_device {
 
 	/* BIOS */
 	uint8_t				*bios;
+	uint32_t			bios_size;
 	bool				is_atom_bios;
 	struct amdgpu_bo		*stollen_vga_memory;
 	uint32_t			bios_scratch[AMDGPU_BIOS_NUM_SCRATCH];
@@ -1679,8 +1682,6 @@ uint32_t amdgpu_ttm_tt_pte_flags(struct amdgpu_device *adev, struct ttm_tt *ttm,
 void amdgpu_vram_location(struct amdgpu_device *adev, struct amdgpu_mc *mc, u64 base);
 void amdgpu_gtt_location(struct amdgpu_device *adev, struct amdgpu_mc *mc);
 void amdgpu_ttm_set_active_vram_size(struct amdgpu_device *adev, u64 size);
-u64 amdgpu_ttm_get_gtt_mem_size(struct amdgpu_device *adev);
-int amdgpu_ttm_global_init(struct amdgpu_device *adev);
 int amdgpu_ttm_init(struct amdgpu_device *adev);
 void amdgpu_ttm_fini(struct amdgpu_device *adev);
 void amdgpu_program_register_sequence(struct amdgpu_device *adev,

drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c

@@ -74,6 +74,7 @@ static bool igp_read_bios_from_vram(struct amdgpu_device *adev)
 		iounmap(bios);
 		return false;
 	}
+	adev->bios_size = size;
 	memcpy_fromio(adev->bios, bios, size);
 	iounmap(bios);
 	return true;
@@ -103,6 +104,7 @@ bool amdgpu_read_bios(struct amdgpu_device *adev)
 		pci_unmap_rom(adev->pdev, bios);
 		return false;
 	}
+	adev->bios_size = size;
 	memcpy_fromio(adev->bios, bios, size);
 	pci_unmap_rom(adev->pdev, bios);
 	return true;
@@ -135,6 +137,7 @@ static bool amdgpu_read_bios_from_rom(struct amdgpu_device *adev)
 		DRM_ERROR("no memory to allocate for BIOS\n");
 		return false;
 	}
+	adev->bios_size = len;
 
 	/* read complete BIOS */
 	return amdgpu_asic_read_bios_from_rom(adev, adev->bios, len);
@@ -159,6 +162,7 @@ static bool amdgpu_read_platform_bios(struct amdgpu_device *adev)
 	if (adev->bios == NULL) {
 		return false;
 	}
+	adev->bios_size = size;
 
 	return true;
 }
@@ -273,6 +277,7 @@ static bool amdgpu_atrm_get_bios(struct amdgpu_device *adev)
 		kfree(adev->bios);
 		return false;
 	}
+	adev->bios_size = size;
 	return true;
 }
 #else
@@ -334,6 +339,7 @@ static bool amdgpu_acpi_vfct_bios(struct amdgpu_device *adev)
 	}
 
 	adev->bios = kmemdup(&vbios->VbiosContent, vhdr->ImageLength, GFP_KERNEL);
+	adev->bios_size = vhdr->ImageLength;
 	ret = !!adev->bios;
 
 out_unmap:

drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c

@@ -723,7 +723,7 @@ static uint16_t amdgpu_get_firmware_version(struct cgs_device *cgs_device,
 					enum cgs_ucode_id type)
 {
 	CGS_FUNC_ADEV;
-	uint16_t fw_version;
+	uint16_t fw_version = 0;
 
 	switch (type) {
 		case CGS_UCODE_ID_SDMA0:
@@ -753,9 +753,11 @@ static uint16_t amdgpu_get_firmware_version(struct cgs_device *cgs_device,
 		case CGS_UCODE_ID_RLC_G:
 			fw_version = adev->gfx.rlc_fw_version;
 			break;
+		case CGS_UCODE_ID_STORAGE:
+			break;
 		default:
 			DRM_ERROR("firmware type %d do not have version\n", type);
-			fw_version = 0;
+			break;
 	}
 	return fw_version;
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c

@@ -451,7 +451,7 @@ static int amdgpu_cs_validate(void *param, struct amdgpu_bo *bo)
 		return r;
 
 	if (bo->shadow)
-		r = amdgpu_cs_bo_validate(p, bo);
+		r = amdgpu_cs_bo_validate(p, bo->shadow);
 
 	return r;
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -1470,20 +1470,26 @@ static int amdgpu_fini(struct amdgpu_device *adev)
 			amdgpu_wb_fini(adev);
 			amdgpu_vram_scratch_fini(adev);
 		}
-		/* ungate blocks before hw fini so that we can shutdown the blocks safely */
-		r = adev->ip_blocks[i].version->funcs->set_clockgating_state((void *)adev,
-									     AMD_CG_STATE_UNGATE);
-		if (r) {
-			DRM_ERROR("set_clockgating_state(ungate) of IP block <%s> failed %d\n",
-				  adev->ip_blocks[i].version->funcs->name, r);
-			return r;
+
+		if (adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_UVD &&
+			adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCE) {
+			/* ungate blocks before hw fini so that we can shutdown the blocks safely */
+			r = adev->ip_blocks[i].version->funcs->set_clockgating_state((void *)adev,
+										     AMD_CG_STATE_UNGATE);
+			if (r) {
+				DRM_ERROR("set_clockgating_state(ungate) of IP block <%s> failed %d\n",
+					  adev->ip_blocks[i].version->funcs->name, r);
+				return r;
+			}
 		}
+
 		r = adev->ip_blocks[i].version->funcs->hw_fini((void *)adev);
 		/* XXX handle errors */
 		if (r) {
 			DRM_DEBUG("hw_fini of IP block <%s> failed %d\n",
 				  adev->ip_blocks[i].version->funcs->name, r);
 		}
+
 		adev->ip_blocks[i].status.hw = false;
 	}
 
@@ -2973,6 +2979,66 @@ static ssize_t amdgpu_debugfs_wave_read(struct file *f, char __user *buf,
 	return result;
 }
 
+static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf,
+					size_t size, loff_t *pos)
+{
+	struct amdgpu_device *adev = f->f_inode->i_private;
+	int r;
+	ssize_t result = 0;
+	uint32_t offset, se, sh, cu, wave, simd, thread, bank, *data;
+
+	if (size & 3 || *pos & 3)
+		return -EINVAL;
+
+	/* decode offset */
+	offset = (*pos & 0xFFF);       /* in dwords */
+	se = ((*pos >> 12) & 0xFF);
+	sh = ((*pos >> 20) & 0xFF);
+	cu = ((*pos >> 28) & 0xFF);
+	wave = ((*pos >> 36) & 0xFF);
+	simd = ((*pos >> 44) & 0xFF);
+	thread = ((*pos >> 52) & 0xFF);
+	bank = ((*pos >> 60) & 1);
+
+	data = kmalloc_array(1024, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* switch to the specific se/sh/cu */
+	mutex_lock(&adev->grbm_idx_mutex);
+	amdgpu_gfx_select_se_sh(adev, se, sh, cu);
+
+	if (bank == 0) {
+		if (adev->gfx.funcs->read_wave_vgprs)
+			adev->gfx.funcs->read_wave_vgprs(adev, simd, wave, thread, offset, size>>2, data);
+	} else {
+		if (adev->gfx.funcs->read_wave_sgprs)
+			adev->gfx.funcs->read_wave_sgprs(adev, simd, wave, offset, size>>2, data);
+	}
+
+	amdgpu_gfx_select_se_sh(adev, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF);
+	mutex_unlock(&adev->grbm_idx_mutex);
+
+	while (size) {
+		uint32_t value;
+
+		value = data[offset++];
+		r = put_user(value, (uint32_t *)buf);
+		if (r) {
+			result = r;
+			goto err;
+		}
+
+		result += 4;
+		buf += 4;
+		size -= 4;
+	}
+
+err:
+	kfree(data);
+	return result;
+}
+
 static const struct file_operations amdgpu_debugfs_regs_fops = {
 	.owner = THIS_MODULE,
 	.read = amdgpu_debugfs_regs_read,
@@ -3015,6 +3081,11 @@ static const struct file_operations amdgpu_debugfs_wave_fops = {
 	.read = amdgpu_debugfs_wave_read,
 	.llseek = default_llseek
 };
+static const struct file_operations amdgpu_debugfs_gpr_fops = {
+	.owner = THIS_MODULE,
+	.read = amdgpu_debugfs_gpr_read,
+	.llseek = default_llseek
+};
 
 static const struct file_operations *debugfs_regs[] = {
 	&amdgpu_debugfs_regs_fops,
@@ -3024,6 +3095,7 @@ static const struct file_operations *debugfs_regs[] = {
 	&amdgpu_debugfs_gca_config_fops,
 	&amdgpu_debugfs_sensors_fops,
 	&amdgpu_debugfs_wave_fops,
+	&amdgpu_debugfs_gpr_fops,
 };
 
 static const char *debugfs_regs_names[] = {
@@ -3034,6 +3106,7 @@ static const char *debugfs_regs_names[] = {
 	"amdgpu_gca_config",
 	"amdgpu_sensors",
 	"amdgpu_wave",
+	"amdgpu_gpr",
 };
 
 static int amdgpu_debugfs_regs_init(struct amdgpu_device *adev)

drivers/gpu/drm/amd/amdgpu/amdgpu_display.c

@@ -187,7 +187,7 @@ int amdgpu_crtc_page_flip_target(struct drm_crtc *crtc,
 		goto cleanup;
 	}
 
-	r = amdgpu_bo_pin_restricted(new_abo, AMDGPU_GEM_DOMAIN_VRAM, 0, 0, &base);
+	r = amdgpu_bo_pin(new_abo, AMDGPU_GEM_DOMAIN_VRAM, &base);
 	if (unlikely(r != 0)) {
 		r = -EINVAL;
 		DRM_ERROR("failed to pin new abo buffer before flip\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c

@@ -171,7 +171,7 @@ static int amdgpufb_create_pinned_object(struct amdgpu_fbdev *rfbdev,
 	}
 
 
-	ret = amdgpu_bo_pin_restricted(abo, AMDGPU_GEM_DOMAIN_VRAM, 0, 0, NULL);
+	ret = amdgpu_bo_pin(abo, AMDGPU_GEM_DOMAIN_VRAM, NULL);
 	if (ret) {
 		amdgpu_bo_unreserve(abo);
 		goto out_unref;