In _init_kmemleak() we're touching a check_kmemleak file in
${RESULT_BASE} if ${DEBUGFS_MNT/kmemleak} exists as a marker that we
have to check for kmemleak output after running a test.
In 'check' we're calling _init_kmemleak() at around 60% of the file,
but ${RESULT_BASE} is created later at around 62% of the file,
causing the 'touch' in _init_kmemleak() to fail.
Create the ${RESULT_BASE} just after assigning the default value in
get_next_config()
[Eryu: check for mkdir failure and remove the $RESULT_BASE creation
in check.]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On older e2fsprogs, fsck command will check lost+found for extX,
so that it will get error if lost+found has been removed during
cleanup. For example:
----------------------------------------------------------
e2fsck 1.41.12 (17-May-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
/lost+found not found. Create? no
...
----------------------------------------------------------
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In _create_dumpdir_stress_num, disable copyrange in fsstress so that we
dump exactly the same set of files and directories no matter how the xfs
is configured.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Add support for the copy_file_range system call to fsx.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[dchinner: copy_file_range() needs to obey read/write constraints
otherwise is blows up when direct IO is used]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Use an enum to define operation codes and the boundaries between
operation classes so that we can add new commands without having to
change a bunch of unrelated #defines.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-By: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Add a new option to make fsx read the file after each operation and
compare it with the good buffer to try to catch corruptions as soon as
they occur.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-By: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This patch aims to add more tests to the xfstest suite to check
whether the target file system recovers correctly after a crash.
These test cases are generated by CrashMonkey, a
crash-consistency testing framework built at the SASLab at UT Austin.
This patch batches 37 crash-consistency tests into a xfstest test,
each of which checks the hard link behavior under different scenarios.
This test creates hard-links between files in the same directory or
across directories, while allowing fsync of either the files involved,
their parent directories, or unrelated sibling files. After each sub
test, the metadata of the persisted file is checked for the correct
link count. Additionally, each sub test is followed by fsck to check
for inconsistencies. The tests run on a 256MB file system, and
the working directory is cleaned up after every sub test.
Signed-off-by: Jayashree Mohan <jaya@cs.utexas.edu>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Commit 6b06a9bb6f has used SCRATCH_DEV/SCRATCH_MNT rather than
TEST_DEV/TEST_DIR for holding the test files, so we need to use
SCRATCH_DEV/SCRATCH_MNT in _check_ext4_eof_flag() as well.
Fixes: 6b06a9bb6f ("ext4/002: Work with 64k block size")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
For 64k blocksize, 10MiB as the filesystem size isn't sufficient to have
a journal included. Hence this commit computes the test FS size based on
the block size of the underlying filesystem.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This commit changes the script to operate on FS blocks by obtaining the
block size from the underlying filesystem and using it to perform I/O in
units of block sizes.
This commit also uses $SCRATCH_MNT rather than $TEST_DIR for holding the
test files since the FS on $TEST_DIR might be created with a different
block size than the one specified in $MKFS_OPTIONS.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In generic/519, filefrag command use FIBMAP ioctl(-B option) to print
output in extent format(-e option) on purpose and sync file(-s option),
so add _require_filefrag_options() to check if the command supports
all of these options.
References:
1) filefrag supports -e option by commit 2508eaa since e2fsprogs v1.42.7.
2) filefrag supports -B option by commit 5d5e01d since e2fsprogs v1.41.9.
3) filefrag supports -s option by commit e62847c since e2fsprogs v1.41.6.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On ppc64le, block size reported by fstat(2) is 64k (the page size)
i.e. the "preferred I/O size". However src/t_stripealign.c requires the
actual block size of the filesystem. Hence this commit now makes use of
the block size reported by fstatfs(2) syscall.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On upstream kernel, running some tests which corrupt XFS on purpose
got the mismatched output. e.g. running xfs/087:
------------------------------------------------
+ check fs
+ corrupt image
+ mount image
-+ modify files
-broken: 1
+ repair fs
+ mount image (2)
------------------------------------------------
It is reasonable for corrupted XFS to be caught and rejected by mount
or read/write operation.
Fixes: 0828657542 ("xfs: fix blocktrash fuzzers")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Check that the file system actually supports preallocation for defrag
tests that end up calling xfs_fsr, as they can't be supported in
always_cow mode.
[Eryu: add comments in code as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The always_cow mode can't usefull preallocate space gіven that it
always has to write out of place, and thus will reject falloc or
ioctl calls to preallocate space in a file. Add explicit checks for
preallocation support in various XFS-specific tests to support this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Various reflink tests currently use fallocate to preallocate space
without first checking that preallocations are supported. Add
explicit checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Test an incremental send operation in a scenario where the relationship
of ancestor-descendant between multiple directories is inversed, and
where multiple directories that were previously ancestors of another
directory now become descendents of multiple directories that used to be
their ancestors in the parent snapshot. This used to trigger an
infinite loop in the kernel code.
This is motivated by a bug found in btrfs which is fixed by the following
patch for the linux kernel:
"Btrfs: send, fix infinite loop due to directory rename dependencies"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>