New fsstress operation breaks fs dump/restore testing which use
fsstress, e.g xfs/068.
In _create_dumpdir_stress_num, disable splice in fsstress so that we
dump exactly the same set of files and directories.
Quote Dave's comments for future reference
"
fsstress is just creating regular files differently. It has no
impact on xfsdump does except to change the number of files created
and the directory layout.
If this new functionality were creating a new type of file that
xfsdump has to handle, or adding new attributes or changing the
metadata of the existing files, then we want to make sure xfsdump is
tested against that, and so we'd be changing the golden output after
careful checking that both xfsdump and xfs_restore are working
correctly and the file count is correct.
But when all we are doing is creating normal, regular files just
with a different syscall, it makes no sense to perturb the existing
test then we have to go and validate that the new set of files being
tested is actually scanned correctly, is complete and correct. Using
a blacklist to avoid unnecessary perturbation such as in cases like
this is the right thing to do because we've had to determine if the
new functionality is a useful addition to xfsdump/restore test
coverage or not.
"
[Eryu: add Dave's comments in commit log for future reference]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Make sure file capabilities are not lost over copy-up when file is
opened for WRITE but nothing is actually written to it.
Following commit introduced regression where if a lower file with
CAP_SETUID is opened for writing, and capability is cleared over copy up.
bd64e57586d3 ("ovl: During copy up, first copy up metadata and then data")
A later kernel patch will fix it. This test will help avoid introducing
such regressions again.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
XFS has a bug where page writeback can end up sending data to the
wrong location due to a stale, cached file mapping. Add a test to
trigger this problem by racing background writeback with a
truncate/rewrite of the final page of the file.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Commit fb235dc06fac ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans") could cause ABBA deadlock
between backref lookup with write lock hold (subvolume deletion) and
other read/write operations.
It's going to be fixed by "btrfs: qgroup: Don't trigger backref walk
at delayed ref insert time".
This test will generate pwrite background workload, along with
constant subvolume creation and deletion to trigger the bug.
It needs some time to generate enough files to bump the tree height
to trigger the bug.
In my test environment, with 'unsafe' cache mode for the VM, it
triggers the bug at around 70~90 seconds. So I leave the default
runtime to 120s to make sure the bug will be triggered.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
btrfs/16[123] are all seed device related test cases, make them into
'seed' group.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Eric Sandeen recently found a bug in xfs_repair that flagged extended
attribute names containing "/" as corrupt and purged them. There's
nothing in the IRIX or Linux manuals that say anything about slashes not
being allowed (and Linux certainly allows this) so let's make sure this
continues to work.
[Eryu: use $SETFATTR and _getfattr helper]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
When running xfstests generic/423 to test system call statx() on
hard link files of NFS, it fails. error message:
[!] attr 'stx_mask' differs from ref file, 7ff != e0
The values of parameter "mask" between the original file and the
reference file are different. One is STATX_ALL;
The other is STATX_ATIME | STATX_BTIME | STATX_CTIME | STATX_MTIME.
Modify the function get_reference() to pass the "mask" in, and
change STATX_ATIME | STATX_BTIME | STATX_CTIME | STATX_MTIME to
"mask".
Signed-off-by: Cui Yue <cuiyue-fnst@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This commit tried to fix the brokennes of the kmemleak support but it
inadvertently broke the creation of the RESULT_BASE directory which lead to
problems creating check.time file. Turns out kmemleak support in xfstests has
more problems and it needs to be majorly refactor and this commit doesn't
really solve the problem. For the time being just revert to at least allow
older configuration files, which have explicitly set RESULT_BASE to work.
This reverts commit 7fc034868d.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
When running xfstests under KVM VM and the load of host is high,
only delaying 1s and checking the readiness of server are not
enough, and the test case will fail early.
Fix it by repeatedly checking the readiness signal until it's found,
or timeout is triggered.
[Eryu: check if lock server died or not, like v1 patch did]
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In configure script, we only check whether or not the build of test
program succeeds, but that doesn't mean the kernel has implemented
the syscall, so checking for this case.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
x/139 and x/140 makes XFS with very small agsize. That agsize is too
small for a large fs. And it's not necessary to test on large fs, so
skip it directly if scratch dev is large dev.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
If testing on large fs (--large-fs option), there's a huge size
.use_space file in $SCRATCH_MNT, then `fssum $SCRATCH_MNT` trys to
read whole huge file. That's wasting time, so change the target path
to a sub-dir of $SCRATCH_MNT.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Else there won't be any error messages when mounting SCRATCH_DEV
failed, because _scratch_mount exits early by invoking _fail.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Also add a requirment that fallocate and fiemap is supported.
(Fallocate isn't the case when we are emulating ext3, for example.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Liu Bo <obuil.liubo@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Look for uninterpretable stringified constants in the ftrace format
description for xfs tracepoints.
[Eryu: add $CC_PROG definition and require it in test, also use
$DEBUGFS_MNT instead of hard coded path]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
A few tests require v4 filesystems and enforce this by disabling
crc's in the _scratch_mkfs call. However, if the user specified
MOUNT_OPTIONS that only work with v5 filesystems, these tests fail.
If we detect a test creating a v4 scratch filesystem, filter out
incompatible mount options that don't work on v4, such as
simultaneous group/project quota.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In XFS, mounting with quota always require a writable device. If
the block device is read only, the mount fails, which fails this
test. Since this is expected, work around this by simulating the
golden output when we expect a mount failure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In this test we try to create a remote symlink block by creating a
symlink target buffer large enough to exceed the size of an inode.
Unfortunately we don't use the correct block size or symlink header
size, which on a 1k block filesystem causes there to be two remote
blocks. This causes crc verification errors in xfs_db (because it's
too dumb to load both blocks as one like the kernel does) which we
don't care about because we're about to corrupt the block anyway.
So, fix the block size calculation so that we end up with one block.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In commit f4eee5126, this test was changed to run xfs_fsr to
bulkstat its way through the filesystem until it finds the corrupt
inode. The golden output was changed to capture xfs_fsr's output,
but neglects the fact that when fsr's output is not a tty, all the
status and error messages are sent to syslog, not stdout.
Therefore, this test consistently fails because it expects output of
"$SCRATCH_MNT start inode=0" but this never appears.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
It is currently processed before FSTYP has been properly set,
leading to xfs, btrfs, etc. specific exclude_files being ignored.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
With older util-linux(e.g. v2.17.2), running some tests(e.g.
generic/472, generic/495) got the following output:
-------------------------------------------------------
+mkswap: /mnt/xfstests/scratch/swap: warning: don't erase bootbits sectors
+ on whole disk. Use -f to force.
+mkswap: unable to relabel /mnt/xfstests/scratch/swap to system_u:object_r:swapfile_t:s0: Operation not supported
-------------------------------------------------------
1) Before commit c1f1b30 of util-linux, standard mkswap didn't zap bootbits
sectors and printed a warning until force option(i.e. -f) was given. We
define "mkswap -f" as MKSWAP_PROG and replace all standard mkswap with
$MKSWAP_PROG.
2) With mounting default SELinux context(e.g. system_u:object_r:root_t:s0),
standard mkswap tried to reset the type of default context to swapfile_t
if it is not swapfile_t, and then it failed and returned ENOTSUP expectedly
as we don't want to create any SELinux attr on purpose. standard mkswap
ignored this relabel error by commit d97dc0e of util-linux, but it still
reported the error before commit d97dc0e. We try to skip the reset step
in standard mkswap by mounting swapfile context directly.
Note:
We just mount swapfile context in related tests, and keep default context
in the rest of tests.
[Eryu: make mkswap a non-mandatory requirement and add comments on
"-f" option]
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Zorro Lang
Vivek Goyal
Brian Foster
Qu Wenruo
Darrick J. Wong
Cui Yue
Nikolay Borisov
Hou Tao
Theodore Ts'o
David Disseldorp
Xiao Yang