With older util-linux(e.g. v2.17.2), running some tests(e.g.
generic/472, generic/495) got the following output:
-------------------------------------------------------
+mkswap: /mnt/xfstests/scratch/swap: warning: don't erase bootbits sectors
+ on whole disk. Use -f to force.
+mkswap: unable to relabel /mnt/xfstests/scratch/swap to system_u:object_r:swapfile_t:s0: Operation not supported
-------------------------------------------------------
1) Before commit c1f1b30 of util-linux, standard mkswap didn't zap bootbits
sectors and printed a warning until force option(i.e. -f) was given. We
define "mkswap -f" as MKSWAP_PROG and replace all standard mkswap with
$MKSWAP_PROG.
2) With mounting default SELinux context(e.g. system_u:object_r:root_t:s0),
standard mkswap tried to reset the type of default context to swapfile_t
if it is not swapfile_t, and then it failed and returned ENOTSUP expectedly
as we don't want to create any SELinux attr on purpose. standard mkswap
ignored this relabel error by commit d97dc0e of util-linux, but it still
reported the error before commit d97dc0e. We try to skip the reset step
in standard mkswap by mounting swapfile context directly.
Note:
We just mount swapfile context in related tests, and keep default context
in the rest of tests.
[Eryu: make mkswap a non-mandatory requirement and add comments on
"-f" option]
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In _init_kmemleak() we're touching a check_kmemleak file in
${RESULT_BASE} if ${DEBUGFS_MNT/kmemleak} exists as a marker that we
have to check for kmemleak output after running a test.
In 'check' we're calling _init_kmemleak() at around 60% of the file,
but ${RESULT_BASE} is created later at around 62% of the file,
causing the 'touch' in _init_kmemleak() to fail.
Create the ${RESULT_BASE} just after assigning the default value in
get_next_config()
[Eryu: check for mkdir failure and remove the $RESULT_BASE creation
in check.]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In _create_dumpdir_stress_num, disable copyrange in fsstress so that we
dump exactly the same set of files and directories no matter how the xfs
is configured.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In generic/519, filefrag command use FIBMAP ioctl(-B option) to print
output in extent format(-e option) on purpose and sync file(-s option),
so add _require_filefrag_options() to check if the command supports
all of these options.
References:
1) filefrag supports -e option by commit 2508eaa since e2fsprogs v1.42.7.
2) filefrag supports -B option by commit 5d5e01d since e2fsprogs v1.41.9.
3) filefrag supports -s option by commit e62847c since e2fsprogs v1.41.6.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Check that the file system actually supports preallocation for defrag
tests that end up calling xfs_fsr, as they can't be supported in
always_cow mode.
[Eryu: add comments in code as well]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
xfstests doesn't cover FIBMAP test, it cause we brought in a
regression bug fixed by "79b3dbe4adb3 fs: fix iomap_bmap position
calculation".
Although FIBMAP is old, there're still some programs use it, likes
LILO. This case tests if there's physical address overlap returned
by FIBMAP.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The leafn creation test doesn't work on some v4 filesystems
because the field names change. Rearrange the code somewhat so that it
works properly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
A bug in file cloning/reflinking was recently found that afftected both
Btrfs and XFS, which was caused by allowing the cloning of an eof block
into the middle of a file when the eof is not aligned to the filesystem's
block size.
The fix consists of returning the errno -EINVAL to user space when the
arguments passed to the system call lead to the scenario of data
corruption. However this overlaps with some cases where the system call,
in Btrfs, returned -EOPNOTSUPP, which means we are trying to reflink
inline extents. That is unsupported in Btrfs due to the huge complexity
of supporting it (due to copying and trimming inline extents, deal with
eventual compression, etc).
We have a few btrfs test cases that verify that attempts to clone inline
extents result in a failure, and are currently expecting an -EINVAL error
message from the output of the cloner program. So create a filter that
converts error messages related to the -EOPNOTSUPP error to messages
related to the -EINVAL error, so that the test can run both on patched
and non-patched linux kernels.
The corresponding btrfs patch for the linux kernel is titled:
"Btrfs: fix data corruption due to cloning of eof block"
And the VFS change that introduces the -EINVAL error return was introduced
by the following linux kernel commit (landed in 4.20-rc1):
07d19dc9fbe9 ("vfs: avoid problematic remapping requests into partial EOF block")
The btrfs patch is not yet in Linus' tree (it was submitted around the
same time as this change) and the VFS change was introduced in 4.10-rc1.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
When xfsdump is making multi-file dumps, the quota information are
written into the last dump file. However, the multi-file restore script
(as written) expects to see quota information restored by every dump
file and fails. This is silly, so fix it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On XFS, the only reliable way to clean out speculative post-eof
preallocations, delayed allocations, and speculative cow preallocations
is to cycle the filesystem mount. Since we're comparing the post-test
quota counts against a freshly quotacheck to look for leaks, it's fine
to cycle the mount. This eliminates sporadic quota count failures when
running xfstests with quotas enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
We've had some problems lately with directories containing a single
leafn directory. It turns out that the populate script doesn't create
these, so teach it to do so.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
_require_btime() just check inode creation time feature on TEST_DIR
mountpoint, but generic/508 needs to do that check on SCRATCH_MNT
mountpoint. Let's add _require_scratch_btime() for that, meanwhile
handling scratch_{mkfs,mount,umount} inside the function to decouple
with caller.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Only testing if a domainname is set and ypcat is installed is not a
sufficient criteria to check if NIS is actually active.
Check for a running ypbind in rpcinfo as well.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In case dedupe returns an error in _require_scratch_dedupe(),
report the error for the scratch rather than for the test
filesystem.
Signed-off-by: Anthony Iliopoulos <ailiopoulos@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
After fsync, filesystem should guarantee inode metadata including
creation time being persisted, so even after sudden power-cut, during
mount, we should recover i_crtime_{,nsec} fields correctly, in order
to not loss those meta info.
So adding this testcase to check whether generic filesystem can
guarantee that.
Note that, it needs inode creation time support on specified filesystem.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
After fsync, filesystem should guarantee inode metadata including
project id being persisted, so even after sudden power-cut, during
mount, we should recover project_id fields correctly, in order to
not loss those meta info.
So adding this testcase to check whether generic filesystem can
guarantee that.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
As of now _scratch_mkfs_sized() checks if the requested size is
below 1G and forces the --mixed option for the mkfs.btrfs. Well the
correct size considering all possible group profiles at which we
need to force the mixed option is roughly 256Mbytes. So fix that.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In _require_prjquota(), let's check project quota support as below
for f2fs:
- For image support, check 'project_quota' on enabled feature list
of specified device.
- For kernel support, check /sys/fs/f2fs/features/project_quota
sysfs entry status.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
When testing FS instances of block size other than 4k, the output of
fiemap command will not match those in *.out files. This commit adds
an optional "block size" argument to _filter_fiemap() which prints
fiemap output in units of block size.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
14 test cases use _test_generic_punch(), and they work well as long
as the ext4/xfs blocksize or btrfs sectorsize is below 4K.
In the system with 64K pagesize, as the blocksize can be upto 64K or the
sectorsize can be 64K so 13/14 test cases fail, because the
test-file-size (20k) and thus the extent boundary offsets aren't
big enough to fit the larger than 4k extent size.
Commit 2f194e4e82 (generic/009: don't run
for btrfs if PAGE_SIZE > 4096) tried to address this by calling the
not_run in generic/009.
And in the function _test_generic_punch() we use multiple=4 to address
the similar problem but its limited to the subcommand fcollapse.
Now to run these test cases successfully on systems with pagesize 64k,
this patch propose to increase the default multiple=1 to multiple=16.
With this we increase the test file size from 20k to 320k and thus it
encapsulates maximum extent size of 64k here. And we can drop the
multiple=4 which is just being done similar for the cases of fcollapse
subcommand only. And it appears to me there is no harm in increasing
the file size and offsets in general for all commands instead of just
fcollapse command.
This change is tested on ext4, xfs and btrfs on system with pagesize
4K and 64K.
With this patch, these 14 test cases runs fine on system with 64K
pagesize as well as pagesize 4K. However we may hit the same
limitation at some point when we want to validate the FSs with
pagesizes -gt 64K. And this patch does not address that part as of
now.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
With kernel commit b353756b2b71 ("kmemleak: always register debugfs
file") that was merged to v4.19-rc3, the kmemleak debugfs knob
exists even if kmemleak is disabled, but returns EBUSY on write.
Suppress EBUSY errors in tests by disabling _check_kmemleak() calls
if the write to kmemleak knob failed on _init_kmemleak().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Originally this test case was designed to work with 4K sectorsize.
Now enhance it to work with any sector sizes and makes the following
changes:
.out file not to contain any traces of sector size.
Use max_inline=0 mount option so that it meets the requisite of non inline
regular extent.
Don't log the md5sum results to the output file as the data size vary by
the sectorsize.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
tmpfs doesn't require a device and the source argument of the mount
is ignored. If {TEST|SCRATCH}_DEV is not given then set them to
proper strings.
[Eryu: don't require SCRATCH_DEV too]
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The purpose of OVL_BASE_FSTYP is to store the value of FSTYP that is
found in a host config file section.
When there is no host config file or if user sets FSTYP=overlay in config
file, it makes no sense to store the value "overlay" in OVL_BASE_FSTYP
and it is better to leave it empty or leave its current value in tact.
This allows user to set OVL_BASE_FSTYP in config file or before running
the test to support queries about base fs, such as
_require_metadata_journaling, even when running an overlay test.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Xiao Yang
Johannes Thumshirn
Darrick J. Wong
Christoph Hellwig
Xiong Murphy Zhou
Zorro Lang
Filipe Manana
Chao Yu
Anthony Iliopoulos
Anand Jain
Chandan Rajendra
Amir Goldstein
Miklos Szeredi