This tests that we can not clone an inline extent into a non-zero file
offset. Inline extents at non-zero offsets is something btrfs is not
prepared for and results in all sorts of corruption and crashes on
future IO operations, such as the following BUG_ON() triggered by the
last write operation done by this test:
[152154.035903] ------------[ cut here ]------------
[152154.036424] kernel BUG at mm/page-writeback.c:2286!
[152154.036424] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
(...)
[152154.036424] RIP: 0010:[<ffffffff8111a9d5>] [<ffffffff8111a9d5>] clear_page_dirty_for_io+0x1e/0x90
(...)
[152154.036424] Call Trace:
[152154.036424] [<ffffffffa04e97c1>] lock_and_cleanup_extent_if_need+0x147/0x18d [btrfs]
[152154.036424] [<ffffffffa04ea82c>] __btrfs_buffered_write+0x245/0x4c8 [btrfs]
[152154.036424] [<ffffffffa04ed14b>] ? btrfs_file_write_iter+0x150/0x3e0 [btrfs]
[152154.036424] [<ffffffffa04ed15a>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs]
[152154.036424] [<ffffffffa04ed2c7>] btrfs_file_write_iter+0x2cc/0x3e0 [btrfs]
[152154.036424] [<ffffffff81165a4a>] __vfs_write+0x7c/0xa5
[152154.036424] [<ffffffff81165f89>] vfs_write+0xa0/0xe4
[152154.036424] [<ffffffff81166855>] SyS_pwrite64+0x64/0x82
[152154.036424] [<ffffffff81465197>] system_call_fastpath+0x12/0x6f
(...)
[152154.242621] ---[ end trace e3d3376b23a57041 ]---
This issue is addressed by the following linux kernel patch for btrfs:
"Btrfs: fix file corruption after cloning inline extents".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for adding and dropping an equal number of references
for file extents. Verify that if we drop N references for a file extent
and we add too N new references for that same file extent in the same
transaction, running the delayed references (which always happens at
transaction commit time) does not fail.
The regression was introduced in the 4.2-rc1 Linux kernel and fixed by
the patch titled: "Btrfs: fix order by which delayed references are run".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
create_file may run over before growfs, which depends on many reasons. such as
the schedule algorithm, the workload of testing machine, etc. we should always
make sure the create_file run over after growfs, then we can get the valid
result of this test.
Signed-off-by: George Wang <xuw2015@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On unpatched kernel, converting file with a hole at the beginning to
non-extent based format results in ext4 i_blocks corruption. Add a new
regression test case for it.
These two commits fixed the corruption:
ext4: be more strict when migrating to non-extent based file
ext4: correctly migrate a file with a hole at the beginning
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS had a regression where inode reclaim in the unlink codepath would
not correctly tear down extended attribute forks where no xattr extents
are present. Add a generic test to create this condition.
The test sets extended attributes on a series of files under ENOSPC
conditions and then verifies that the files can be removed without
syslog warnings or errors.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a case for testing whether writing failed on NO_SPACE in a busy
loop of write and delete when disk almost full. It is a long-term
problem since very beginning in btrfs, and has been fixed by
patchset titled "btrfs: Fix no_space on dd and rm loop" from
zhaolei@cn.fujitsu.com.
Signed-off-by: Wang Yanfeng <wangyf-fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that if we truncate a file to a smaller size, then truncate it to
its original size or a larger size, then fsyncing it and a power failure
happens, the file will have the range [first_truncate_size, last_size[
with all bytes having a value of 0x00 if we read it the next time the
filesystem is mounted.
This test is motivated by a bug found in btrfs, which is fixed by a patch
titled: "Btrfs: fix fsync after truncate when no_holes feature is enabled"
Tested against ext3/4, xfs, btrfs (with and without the fix, and with the
no_holes feature disabled), f2fs, reiserfs and nilfs2.
All filesystems pass the test except for unpatched btrfs with the
no_holes feature enabled (as expected) and f2fs. Both produce the
following file contents that differ from the golden output:
File foo content after log replay:
0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
*
0200000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb
*
0372000
File bar content after log replay:
0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0200000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0372000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0772000
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that after truncating a file into the middle of a hole causes the
new size of the file to be persisted after a clean unmount of the
filesystem (or after the inode is evicted). This is for the case where
all the data following the hole is not yet durably persisted, that is,
that data is only present in the page cache.
This test is motivated by an issue found in btrfs, which got fixed by
the patch titled:
"Btrfs: fix shrinking truncate when the no_holes feature is enabled"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some tests append logs to $seqres.full and never remove the log, which
keeps the log file growing. Remove $seqres.full before test in
following tests:
ext4/271
generic/019
generic/269
generic/270
shared/272
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Exercise the situation that cause ext4 to BUG_ON() when we use
zero range to zero a range which starts within the isize but ends
past the isize but still in the same block. This particular problem
has only been seen on systems with page_size > block_size.
This tests exercises the problem fixed in kernel with commit
0f2af21aae11972fa924374ddcf52e88347cf5a8
ext4: Allocate entire range in zero range
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test concurrent buffered I/O, DIO, AIO, mmap I/O and splice I/O on the
same files.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I noticed that btrfs wasn't setting unwritten on prealloc test, and then
subsequently noticed that we weren't testing fiemap on prealloc extents with the
fiemap-tester. This patch adds another test that does the same as generic/225
only with prealloc enabled. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by an issue found in btrfs.
It test that after syncing the filesystem, adding many xattrs to a file,
syncing the filesystem again, writing to the file and then doing a fsync
against that file, all the xattrs still exists after a power failure.
That is, after the fsync log/journal is replayed, the xattrs still exist
and with the correct values.
The btrfs issue is fixed by the patch titled:
"Btrfs: fix fsync xattr loss in the fast fsync path"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by an issue found in btrfs.
It tests that after syncing the filesystem, adding a hard link to a file,
syncing the filesystem again, doing a write to the file that increases
its size and then doing a fsync against that file, durably persists the
data written to the file. That is, after log/journal replay, the data
is available.
The btrfs issue is fixed by the commit titled:
"Btrfs: fix fsync data loss after append write"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
These changes make it possible to run more of the tests on busybox.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a regression test for a problem where attempting to delete the
default subvolume would fail (as expected), but not until after all
submounts under the subvolume were unmounted.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS dynamic inode allocation has a fundamental limitation in that an
inode chunk requires a contiguous extent of a minimum size. Depending on
the level of free space fragmentation, inode allocation can fail with
ENOSPC where the filesystem might not be near 100% usage.
The sparse inodes feature was implemented to provide an inode allocation
strategy that maximizes the ability to allocate inodes under free space
fragmentation. This test fragments free space and verifies that
filesystems that support sparse inode allocation can allocate a minimum
percentage of inodes on the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we enable quota, btrfs will rescan quota numbers. We need
to wait the rescan finished before any more operations on btrfs
qgroups. Otherwith, the new btrfs-progs would WARN out:
WARNING: Rescan is running, qgroup data may be incorrect.
It would make btrfs/022 failed.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit bbe051c841d5 ("xfs: disallow ro->rw remount on norecovery mount")
disabled rw remount on norecovery ro mount, this test makes sure the
behavior is correct.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Call 'udevadm settle' or 'udevsettle' or 'sleep 1' to make sure new lv
is ready for use before making filesystem on it, depends on which
command is available on the system.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The testcase tests 2 corner cases:
Length is zero
Length is smaller than block size
Correct the beginning description by changing "of" to "or".
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In certain cases, the extent size hints can cause maximum extent
size overflows resulting in extent tree corruptions. This test
exercises the original reproducer, and another corner case
demonstrated to expose problems on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
--
Version 2:
- TESTDIR->TEST_DIR
- append output to $seqres.full
generic/019 was failing with:
./tests/generic/019: line 65: /sys/block/pmem0p2/make-it-fail: No such file or directory
When using a partition, the file needed is located at
/sys/block/pmem0/pmem0p2/make-it-fail.
Rather than attempt to deduce whether a block device is a partition
or not, use the symlinks located in /sys/dev/block/ to find the right
location for the make-it-fail file.
Also change btrfs/088 to use the new _sysfs_dev function.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There was some confused about what the fs was supposed to do when you truncate
at i_size with preallocated space past i_size. We decided on the following
things
1) truncate(i_size) will trim all blocks past i_size.
2) truncate(x) where x > i_size will not trim all blocks past i_size.
This test is to make sure we're all acting sanely. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Filipe Manana
George Wang
Eryu Guan
Brian Foster
Wang Yanfeng
Lukas Czerner
Josef Bacik
Ari Sundholm
Omar Sandoval
Dongsheng Yang
Wang Sheng-Hui
Dave Chinner
Matthew Wilcox