-g X: write character X instead of random generated data
This is useful to compare holes between good and bad files
because hexdump of good and bad files compacts the contigious
ranges of X and zeroes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Usually, fsx dumps an .fsxops file on failure with same basename
as work file and possibly under dirctory specified by -P dirpath.
The --record-ops[=opsfile] flag can be use to dump ops file also
on success and to optionally specify the ops file name.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When redirecting the intermixed output of several fsx processes
to a single output file, it is usefull to prefix debug log messages
with a log id. Use fsx -j <logid> to define the log messages prefix.
Fix implementation of prt() function to avoid using a temp buffer
and convert some more printf() calls to use ptr() instead.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Cherry-picked the relevant fsx bits from commit 70d41e17164b
in Josef Bacik's fstests tree (https://github.com/josefbacik/fstests).
Quoting from Josef's commit message:
I've rigged up fsx to have an integrity check mode. Basically it works
like it normally works, but when it fsync()'s it marks the log with a
unique mark and dumps it's buffer to a file with the mark in the filename.
I did this with a system() call simply because it was the fastest. I can
link the device-mapper libraries and do it programatically if that would
be preferred, but this works pretty well.
Signed-off-by: Josef Bacik <jbacik@fb.com>
[Amir:]
- Fix some exit codes
- Require -P dirpath for -i logdev
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This commit adds a test to verify constant d_ino feature. The
following scenarios are checked,
- Parent's (i.e. "..") d_ino must always be calculated because a
pure dir can be residing inside a merged dir.
- d_ino for "." must always be calculated because the present
directory can have a copy-up origin.
- Verify d_ino of '.' and '..' before and after dir becomes impure.
While at it also verify if trusted.overlay.impure xattr is
set/reset appropriately and invalidation of readdir cache.
- Verify copied up file's (inside a impure dir) d_ino.
- Verify d_ino values corresponding to "." and ".." entries of a
pure lower dir.
- Verify d_ino of ".." entry of a merged dir.
- Verify pure lower residing in dir which has another lower layer
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Several tests uses both _filter_test_dir and _filter_scratch
concatenated by pipe to filter $TEST_DIR and $SCRATCH_MNT. However,
this would fail if the shorter string is a substring of the other
(like "/mnt" and "/mnt2").
This patch introduces new common filter function to safely call both
_filter_test_dir and _filter_scratch, and update tests and functions
to use this new function.
I checked this with btrfs/029, generic/409,410,411, and
generic/381,383, xfs/106,108 (which calls _filter_quota). Thanks
Eryu for advice.
[eguan: folded 2nd patch into 1st patch and update commit log a bit]
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Linux filesystems generally treat filenames and extended attribute
keys as a bag of bytes, which means that there can be unique
sequences of bytes that render the same on most modern GUIs. So,
let's rig up a test to see if it's really true that we can create
filenames and xattrs that look the same but point to different
files. xfs_scrub will warn about these kinds of situations, though
they're not technically fs "corruption".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Make sure that we update the rmapbt correctly when we collapse-range
a file and the extents on both sides of the hole can be merged. We
can construct this pretty trivially with insert-range and write, so
test that too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The size of the structure used to retrieve per-AG reserved blocks
status has changed (it's not in a released upstream), so update
xfs/122.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The name of the xfs_io scrub subcommand to test for the existence of
the ioctl has been changed to 'test' from 'dummy', so fix xfstests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In generic/173, we try to force a CoW to a mmap'd region to fail if
there's no space to actually stage the CoW operation. That failure
comes in the form of a SIGBUS to xfs_io. If the tester just happens
to have a nonzero coresize ulimit set, a core dump is generated and
the test is marked as having failed, even though the dump generation
is exactly the correct behavior.
Therefore, set the coresize ulimit to zero while calling
_mwrite_byte.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
XFS_IOC_DIOINFO is only used for XFS, but fsstress use it to get
DIO aligned size. If XFS_IOC_DIOINFO returns error, then stop
doing any DIO related test (dread/dwrite/aread/awrite etc). That
means we never do DIO related test on other filesystems by fsstress.
The real minimal dio size is really not so important for DIO test
in fsstress. The multiple of real min dio size is fine too. I think
the stat.st_blksize get from stat() system call can be used to be
a fake minimal dio size, if XFS_IOC_DIOINFO fails (not supported).
Note that the equation about d_maxiosz is copied from kernel
XFS_IOC_DIOINFO ioctl source code:
case XFS_IOC_DIOINFO: {
...
da.d_mem = da.d_miniosz = target->bt_logical_sectorsize;
da.d_maxiosz = INT_MAX & ~(da.d_miniosz - 1);
...
}
[eguan: update commit log add d_maxiosz reference]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This adds a regression test for the following kernel patch:
commit 42d4a99b09cb ("ext4: fix fault handling when mounted with -o
dax,ro")
The above patch fixes an issue with ext4 where executables cannot be
run on read-only filesystems mounted with the DAX option.
This issue does not appear to be present in ext2 or XFS, as they
both pass the test. I've also confirmed outside of the test that
they are both indeed able to execute binaries on read-only DAX
mounts.
Thanks to Randy Dodgen for the bug report and reproduction steps.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Randy Dodgen <rdodgen@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In this test, the cleaner thread deletes the directory trees created
by fsstress in order to exercise the free inode btree code.
However, if fsstress dies, the cleaner can end up waiting forever
for a directory that will never be created, which hangs up the test
run. Therefore, abort if fsstress has ended.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <eguan@redhat.com>
These two tests simulate log failure during a reflink operation.
However, the contents of the target of the reflink operation depend
on the block size, so we cannot hardcode md5 hashes in this test.
Since the whole point of the test is to ensure that the the complex
chain of transactions actually finishes no matter where the
interruption, it is sufficient simply to run the usual end-of-test
fsck to look for corrupt metadata.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
xfs/095 fails on 4k hard sector size device, due to it runs:
_mkfs_log "-l version=1 -m crc=0 -d sectsize=512"
So _notrun if SCRATCH_DEV's sector size is bigger than 512b.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Some distros (NixOS) have their build environment enable
-Werror=format-security by default for security/hardening reasons.
Currently fsx fails to build due to this:
fsx.c: In function 'prt':
fsx.c:215:18: error: format not a string literal and no format arguments [-Werror=format-security]
fprintf(stdout, buffer);
^
fsx.c:217:20: error: format not a string literal and no format arguments [-Werror=format-security]
fprintf(fsxlogf, buffer);
^
Indeed the compiler is correct here, if the message-to-be-printed were
to contain a '%', unpredictable things would happen. Fix this.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
I can't recall anymore what exactly I did to have tests using t_mtab
to fail, but nevertheless this commit adds the proper newlines.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When command line arg -P <dirpath> is used, compose the
path for .fsxgood .fsxlog .fsxops files from dirpath and
work file basename.
This fix is ported from LTP.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Not sure why, but with initstate()/setstate(), fsx generates
same events regadless of the input seed argument.
Change to use srandom() to fix the problem.
Add pid to auto random seed, so parallel fsx executions with auto
seed will use different seed values.
At this time there are 6 tests that use fsx, out of which:
2 use -S 0 as seed (gettime()) - generic/{075,112}
2 do not specify seed (default = 1) - generic/{091,263}
1 uses explicit constant seed - generic/127
1 uses explicit $RANDOM seed - generic/231
This change affects all those tests.
The tests that intended to randomize the seed will now really
randomize the seed.
The tests that intended to use a constant seed will still use
a constant seed, but resulting event sequence will be different
than before this change.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When _require_xfs_io_command is passed command parameters,
the resulting error from invalid parameters may be ignored.
For example, the following bogus params would not abort the test:
_require_xfs_io_command "falloc" "-X"
_require_xfs_io_command "fiemap" "-X"
Fix this by looking for the relevant error message.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When mixing buffered reads and asynchronous direct writes, it is
possible to end up with the situation where we have stale data in
the page cache while the new data is already written to disk.
This issue should be fixed by patch titled:
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
If generic/437 is run before generic/420, the latter fails with:
4c4
< stat.size = 2048
---
> stat.size = 2097152
because both use $TEST_DIR/testfile. generic/437 leaves it at 2M,
while generic/420 assumes that it is empty (or at least smaller than
2048 bytes).
Use a private test file (testfile.$seq) and truncate it on open just in
case.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Amir Goldstein
Chandan Rajendra
Misono, Tomohiro
Darrick J. Wong
Zorro Lang
Ross Zwisler
Tuomas Tynkkynen
Ilya Dryomov