This test case tests if the device delete works with
the failed (EIO) source device. EIO errors are achieved
usign the DM device.
This test would need following btrfs-progs and btrfs
kernel patch
btrfs-progs: device delete to accept devid
Btrfs: device delete by devid
However when btrfs-progs patch is not found this test will
not run, and when kernel patch is not found btrfs-progs
will fail gracefully and thus the test script.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Controlled EIO from the device is achieved using the dm device.
Helper functions are at common/dmerror.
Broadly steps will include calling _dmerror_init().
_dmerror_init() will use SCRATCH_DEV to create dm linear device and assign
DMERROR_DEV to /dev/mapper/error-test.
When test script is ready to get EIO, the test cases can call
_dmerror_load_table() which then it will load the dm error.
so that reading DMERROR_DEV will cause EIO. After the test case is
complete, cleanup must be done by calling _dmerror_cleanup().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The current _require_meta_uuid() test looks for a failure return
code from xfs_db -x -c "uuid generate" but in fact this exits
with success. (In fact uuid_f always exits with success; perhaps
this needs fixing, but that's in the wild now).
So grep for the string(s) stating that it failed, instead.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/020 need -f option, or it'll be fail on 4k sector device.
Add -f option for xfs/032 for safe and better.
There're some cases use _check_xfs_filesystem(), or others
function which call this function to check a regular file.
That's will fail when the regular file on a 4k sector device.
For example xfs/250.
So I change _check_xfs_filesystem(), add -f option to xfs_repair,
when the $device is a file.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Targeted fuzzing tests which destroy various pieces of filesystem or
allocation group metadata; the tests look for (a) kernel detection of
corruption, (b) xfs_repair repair of said corruption, and (c)
post-repair fs usability.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Targeted fuzzing tests which destroy various pieces of filesystem or
block group metadata; the tests look for (a) kernel detection of
corruption, (b) e2fsck repair of said corruption, and (c) post-repair
fs usability.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In _count_extents and _count_holes, the output of 'xfs_io -c "fiemap"'
is saved in var res, but the following "echo $res" will merge the
original output into one line. e.g.
0: [0..63]: 96..159
1: [64..127]: hole
will be
0: [0..63]: 96..159 1: [64..127]: hole
so the extent count is always 0 if there's a hole.
This makes generic/046 fail occasionally. (Seems it's easier to
reproduce when the system is under some presure, e.g. with fsstress
running.)
Tested the new _count_extents and _count_holes with generic/04[3-9] and
tests all passed as expect.
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When running ./check and calling a test with a name, id is enough
to find the test (names added in 03c633bf).
If the full test path is tests/xfs/123-foo-bar, then all these
invocations should work, as long as the given part of the test name
is valid and the three-digits id is here.
./check xfs/123-foo-bar
./check xfs/123-foo
./check xfs/123
Always use full test name in results.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tests xfs_db's ability to change & restore UUIDs on V5 filesystems,
and tests xfs_copy's ability to change the UUID on the copy.
Update to _filter_uuid is so that it will catch the UUID output
from xfs_admin -u, which is slightly different than the regexp it
was expecting.
This requires new userspace which knows how to change the UUID on
a V5 superblock.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS had a regression where inode reclaim in the unlink codepath would
not correctly tear down extended attribute forks where no xattr extents
are present. Add a generic test to create this condition.
The test sets extended attributes on a series of files under ENOSPC
conditions and then verifies that the files can be removed without
syslog warnings or errors.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce a parameter to _check_dmesg which allows callers to provide a
customized filter function to filter out intentional dmesg logs. The
default filter is a simple 'cat' command.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS dynamic inode allocation has a fundamental limitation in that an
inode chunk requires a contiguous extent of a minimum size. Depending on
the level of free space fragmentation, inode allocation can fail with
ENOSPC where the filesystem might not be near 100% usage.
The sparse inodes feature was implemented to provide an inode allocation
strategy that maximizes the ability to allocate inodes under free space
fragmentation. This test fragments free space and verifies that
filesystems that support sparse inode allocation can allocate a minimum
percentage of inodes on the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/019 was failing with:
./tests/generic/019: line 65: /sys/block/pmem0p2/make-it-fail: No such file or directory
When using a partition, the file needed is located at
/sys/block/pmem0/pmem0p2/make-it-fail.
Rather than attempt to deduce whether a block device is a partition
or not, use the symlinks located in /sys/dev/block/ to find the right
location for the make-it-fail file.
Also change btrfs/088 to use the new _sysfs_dev function.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
fixes 9435b92 common: _require_command needs to handle parameters
Also quoted $_command because _require_command may be called with an
empty $1 parameter, e.g.:
_require_command "$MY_UTIL_PROG" my_util # but $MY_UTIL_PROG is empty
[ -x ] returns true.
[ -x "" ] returns false, as required here.
Signed-off-by: Omer Zilberberg <omzg@plexistor.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the change to CRCs by default, some tests are updated to call mkfs
with "-m crc=0" option directly, and this breaks testings on older
distros where mkfs.xfs doesn't have crc support.
Introduce a new variable to tell if mkfs.xfs supports v5 xfs and do
tweaks in _scratch_mkfs_xfs_opts() based on it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On devices that have a logical sector smaller than physical sector,
this extra, harmless output now occurs:
QA output created by 060
+specified blocksize 1024 is less than device physical sector size 4096
+switching to logical sector size 512
Creating directory system to dump using src/fill.
Setup .......................................
Dumping to files...
And it causes lots of tests to fail unnecessarily. Filter it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
_require_command fails when a parameter based command is passed to
it, such as "xfs_io -F" or "btrfs filesystem defrag" as the command
string does not point at a binary. Rather than hacking at all the
callers and limiting what we can do with $*_PROGS variables, just
make _require_command handle this case sanely.
Change _require_command to check for one or two variables passed to
it and to fail if none or more than 2 parameters are passed. This
will catch most cases where unquoted parameter-based commands are
passed. Further, for the command variable, the executable we need to
check for is always going to be the first token in the variable.
Hence we can simply ignore everything after the first token for the
purposes of existence and executable checks on the command.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The "brd" kernel ram disk abuses BLKFLSBUF to mean "free all memory
in the ram drive" when in fact it should mean "flush all dirty
buffers to stable storage". The brd driver ignores BLKFLSBUF if
there is an active reference to the block device, (e.g. a fs is
mounted on it), but when a device is layered over the top of it
(e.g. dm-flakey, lvm devices, etc) then the applications and
filesystems hold references to the upper device, not the brd device.
Hence when the upper device passes down BLKFLSBUF to brd, it removes
all the pages in the brd, effectively erasing it. This causes all
sorts of problems.....
Fix this by black listing "/dev/ramXXX" devices from tests that
require DM in some way. The _requires_sane_bdev_flush() macro is
called by the _requires_dm.... checks so that we don't have to
remember to add this to all new tests that use dm in some way.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Full DM snapshot devices can return unexpected errors from the
underlying device, and this causes problems for filesystems. In
particular, xfs used to panic in this test, (fixed by commit 8d6c121
"xfs: fix buffer use after free on IO error"), and on current
4.0-rc3 kernels both ext4 and btrfs trigger WARNINGs.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To allow test names to be more descriptive, allow a suffix to be
added to the numeric name of the test. e.g. a test can be named
"tests/generic/001-some-descriptive-name".
Name suffixes are limited to alphanumeric characters and dash - the
name is always prefixed with an unique id for easy identification
of a specific test. Hence we can still use shorthand forms such as
"generic/001" when referring to a test and be clearly understood.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This commit
73dfa4a common: Fixes for testing NFS over IPv6
adds NFS over IPv6 support, and commit
76c5f3c common: re-enable tests that require scratch dev on NFS
enables NFS tests on scratch device.
Now do the same updates to _require_scratch_nocheck() to enable NFS over
IPv6 support on scratch device.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In generic/019, if we hadn't install fio, we will get following output:
generic/019 [not run] utility required, skipped this test <- *
Not run: generic/019
Passed all 0 tests
When fio is not installed, "$FIO_PROG" is set to blank, and
_require_fio() call _require_command() with none arguments.
This patch fixed all misuse of _require_command(), add 2nd argument
to let _require_command() output right message, and add quotes to
first argument to avoid argument shifting.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_copy doesn't work on v5 xfs without -d option, this fails xfs/073
when testing xfs with MKFS_OPTIONS="-m crc=1" set.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Anand Jain
Eric Sandeen
Zorro Lang
Darrick J. Wong
Eryu Guan
Jan Tulak
Brian Foster
Matthew Wilcox
Omer Zilberberg
Andreas Gruenbacher
Dave Chinner
Zhao Lei