tmpfs does not implement ->get_acl method, overlayfs
need to get its cached acls in permission check when
lower or upper fs is tmpfs.
CC: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
"work" directory in workdir should be cleaned up
and recreated while overlayfs mounting. Or overlayfs
will be mounted read-only.
CC: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
They should be cleaned while mounting overlayfs.
[eguan: remove uncorrect comments about getfacl filter]
CC: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
I think this definitely isn't what we want:
local warn4="WARNING:.*fs/xfs/xfs_file\.c:.*xfs_file_aio_read.*"
local warn4="WARNING:.*fs/iomap\.c:.*iomap_dio_rw.*"
The second warn4 will override the first one. So change the second
to warn5.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
1) xfs/133 and xfs/134 work abnornamlly on RHEL6.8GA and RHEL6.9Beta
because xfs_db fails to set negative i_size and reports "usage:
write fieldname value". The special argument "--" is only used to
end option-scanning in getopt(). So we can run two xfs_db commands
to set negative i_size regardless of the special argument "--" is
needed or not. getopt() has been produced by 'commit c9f5e3db22098
("xfs_db: Allow writes of corrupted data")'.
2) xfs/134 passes unexpectedly on RHEL6.8GA due to EINVAL, so we use
touch command to create 512-aligned test file.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
If the kernel bug has been fixed, stat command fails to get i_size
and reports "Structure needs cleaning". So we use debugfs -R "stat"
instead of stat command to make sure debugfs sets negative i_size.
These cases have been broken by commit 0e13e40b24 ("shared/005,7:
make sure debugfs sets negative i_size").
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Currently "Interrupted!" string always appeared in check.log because
flag cleared at very end after summary was dumped already. It looks
very strange, but it was broken from very beginning 27fba05e
(2001-01-15)
- update interrupt flag at the end of a section loop, but before _wrapup
- dump 'Interrupted' to stdout
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Apparently btrfs already has tests marked as belonging in the defrag
group, but none of the ext4 or generic tests were so marked.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Mount TEST_DEV as non-DAX, SCRATCH_DEV as DAX, then
do some IO between them. In this case we use mmap
and dio/buffered IO read/write test programme.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In a DAX mountpoint, do IO betwen files with and
without DAX per-inode flag. We do mmap, both
O_DIRECT and buffered read/write IO in this case.
Then test again in the same device without dax
mountoption.
Add help _require_scratch_dax to make sure we can
test DAX feature on SCRATCH_DEV.
Add mmap dio test programme to test read/write
between a mmap area of one file and another file
directly or buffered, with different size.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is a regression test for "Btrfs: fix btrfs_decompress_buf2page()".
It fails for zlib on v4.10-rc[1-7].
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that if we have a file with a hole, do a mix of direct IO and
buffered writes to it and truncate the file to a size that lies in
the middle of the hole, after unmounting and mounting again the
filesystem, the file has a correct size and no data loss happened.
This test is motivated by a bug found in btrfs when used with the
no-holes feature (i.e. MKFS_OPTIONS="-O no-holes") which is fixed by
the following patch for the linux kernel:
Btrfs: fix data loss after truncate when using the no-holes feature
[eguan: add _require_odirect]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that both a full and incremental btrfs send operation preserves
file holes.
This used to fail when the filesystem had the NO_HOLES feature enabled,
that is, when the test is run with MKFS_OPTIONS="-O no-holes".
This is fixed by the following patch for the linux kernel:
"Btrfs: incremental send, fix unnecessary hole writes for sparse files"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This test cover linux commit 7ae8fd0, when mnt_group_id=0, it means
this mount no peers. But this bug treat two zero mnt_group_id as
peers. And it cause a crash by dereference a NULL address.
As below, the crash will happen when mount fs on "B/mnt1/mnt2":
shared New FS shared
-----------------------[A/mnt1]----------------------
| | |
| bind | bind |
[C/mnt1]--[slave C]<------[shared A]------>[slave B]--[B/mnt1]
|
|
[B/mnt1/mnt2]
(New FS)
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This case will do function test for mount --make-* operations, it
will verify below state transition:
------------------------------------------------------------------------
| |make-shared | make-slave | make-private |make-unbindab|
--------------|------------|--------------|--------------|-------------|
|shared |shared |*slave/private| private | unbindable |
| | | | | |
|-------------|------------|--------------|--------------|-------------|
|slave |shared | **slave | private | unbindable |
| |and slave | | | |
|-------------|------------|--------------|--------------|-------------|
|shared |shared | slave | private | unbindable |
|and slave |and slave | | | |
|-------------|------------|--------------|--------------|-------------|
|private |shared | **private | private | unbindable |
|-------------|------------|--------------|--------------|-------------|
|unbindable |shared |**unbindable | private | unbindable |
------------------------------------------------------------------------
This case uses fsstress to produce a small random load, to make sure
basic operations on the mountpoints won't cause hang or panic etc.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This case will do function test for mount bind operation, it will
verify below semantics:
---------------------------------------------------------------------------
| BIND MOUNT OPERATION |
|**************************************************************************
|source(A)->| shared | private | slave | unbindable |
| dest(B) | | | | |
| | | | | | |
| v | | | | |
|**************************************************************************
| shared | shared | shared | shared & slave | invalid |
| | | | | |
|non-shared| shared | private | slave | invalid |
***************************************************************************
This case usees fsstress to produce a small random load, to make
sure basic operations on the bind mountpoints won't cause hang or
panic etc.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When I try to write cases about mount shared subtrees test, I find I
always need to do many mount operations, then then umount those
mount point one by one.
To make the code clear, I use a stack to save mounted points
sequentially, then I write 3 common functions to operate this stack.
1. The global stack named MOUNTED_POINT_STACK
2. _get_mount() accepts mount parameters like _mount() does, but the
mountpoint parameter must be the last one. It will run the
mount operation and push the mountpoint name into stack.
3. _put_mount() doesn't need any parameter. It will pop the newest
mountpoint name from the stack, and umount it.
4. _clear_mount_stack() doesn't need any parameter either. It will
umount all mountpoints in the stack sequentially, and set
MOUNTED_POINT_STACK=""
Generally, the _clear_mount_stack() function also can be used as
_init_mount_stack() at the beginning of a case. Because it will
prepare an empty stack.
[eguan: add comments and fix code style]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This test is based on generic/033, which originally used zero range
operations to reproduce indlen reservation problems. Zero range now
includes a pagecache flush before it updates extents, which means
generic/033 is no longer able to reproduce the problem it was
originally written to test.
Create a new test that uses an XFS-specific mechanism (in DEBUG
mode) to induce delalloc extent splits and reproduce the problem
originally reproduced by generic/033. In addition, update the test
to include a larger buffered write pattern that is known to
reproduce premature indlen exhaustion on delalloc extents.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
shared/005 and shared/007 work abnornamlly on RHEL6.8GA and
RHEL6.9Beta because debugfs fails to set i_size to -1 or -512
and reports "exceeds field size maximum". When debugfs fails
to set a negative i_size, we can skip these cases which don't
trigger the kernel bug.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
xfs/083 fails because _scratch_fuzz_modify redirects xfs_io stdout
to $ROUND2_LOG. _scratch_fuzz_modify function has been modified by
commit 7a7463d362 ("populate: fix some silly errors when
modifying a fs while fuzzing").
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
/dev/urandom is incompressible and, /dev/zero is highly compressible,
so both are less effective in testing the compress code logic in btrfs.
This patch introduces a text data generator
cat /dev/urandom | od
to populate the files where /dev/urandom is currently being used in the
btrfs test cases.
And updates the _populate_fs() with a new option -c, so to instruct
to use the compressible data to populate the file(s).
[eguan: add comments, fix indention]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The generic/052 and generic/054 tests run ls on the root directory,
and on ext4 we have a lost+found directory which is not in the
golden output.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Xiong Zhou
Zorro Lang
Xiao Yang
Dmitry Monakhov
Theodore Ts'o
Omar Sandoval
Filipe Manana
Brian Foster
Anand Jain