Change the name of the variables to reflect the client vs server. This
will help in future patches.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
While active, the media backing a swap file is leased to the kernel.
Userspace has no business writing to it. Make sure we can't do this.
The two kernel patches titled as below should fix the bug:
mm: set S_SWAPFILE on blockdev swap devices
vfs: don't allow writes to swap files
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Allocating two bytes at a block boundary with fallocate should allocate
both blocks involved. Test this by writing data to both bytes
afterwards and see whether the on-disk size increases (it should not).
This is a regression test for the kernel patch "xfs: Fix tail rounding
in xfs_alloc_file_space()".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Some testcases may require a special rename flag, such as
RENAME_WHITEOUT, so add support check for if a given rename flag is
supported in _require_renameat2.
[Eryu: rename the helper to _require_renameat2 while we're at it,
and add 'exchange' check to generic/398 and generic/419]
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
xfstests should decide if xfs_quota needs the -f option by
_require_xfs_quota_foreign, not write the -f option after
$XFS_QUOTA_PROG manually. The later way will cause unexpected error
on an old system which xfsprogs doesn't support the -f option.
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Tested-by: Murphy Zhou <jencce.kernel@gmail.com>
Acked-by: Murphy Zhou <jencce.kernel@gmail.com>
Acked-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
generic/564 wants to test for copy_range -f, but as it's implemented
it calls copy_range with a length of zero which will silently return
success from the VFS (at least on some kernels) even if the underlying
fs doesn't support it.
So patch this up 2 ways; perform the test with an explicit length
so it's not a no-op, and go ahead test copy_range w/o -f in the test
first just to be on the safe side (and for clearer failure messages.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On file systems with a block size smaller than the page size, hole
punching can leave the pages at the beginning and the end of the
hole partially mapped to disk blocks. Make sure writes to those
pages are handled correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Those 2 tests fail on btrfs on a ppc64 system with 64k pages. This is
caused by the improved minimum device size calculation in upstream
btrfs-progs (commit: 31d228a2eb98 ("btrfs-progs: mkfs: Enhance minimal
device size calculation to fix mkfs failure on small file")).i
Xfstests implicitly uses '--mixed' options for filesystems smaller than
256mb thus the minimum filesystem size require is derived from the
following equation: 2 * (4mb + nodesize << 10). On a 64k page system
this evaluates to 2 * (4m + 64m) = 136m. This resuts in failures such:
mkfs.btrfs -b $((100 * 1048576)) btrfs-test.img
ERROR: size 104857600 is too small to make a usable filesystem
ERROR: minimum size for btrfs filesystem is 114294784
when running _scratch_mkfs_sized $((100 * 1048576)).
Fix this by increasing the minimum filesystem size to 196 megabytes
which makes mkfs.btrfs happy again and allows the test to proceed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The _casefold_lsattr_dir function lists all of the file attributes.
As result, tests/generic/556.out has an ext4-specific assumption
that the test directories will have the Extents attribute. That
won't be true for all file systems, and it won't even be true for
ext4 file systems that do not have the extents feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This is a regression test that checks for xfs drivers that fail to
unlock the inode after changing the group id fails with EDQUOT. It
pairs with "xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails
due to EDQUOT".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Btrfs does COW, so when we unlink the file we need to update
metadata and write it to a new location, which we can't do because
the thinp is full. This results in an EIO during a metadata write,
which makes us flip read only, thus making it impossible to fstrim
the fs. Just make it so we skip this test for btrfs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Add the missing range arguments to the sync_range command in this test:
according to Josef Bacik, the sync_range command is required to make the test
reproduce the critical situation reliably.
[Eryu: fix dumping xfs_io output to $seqres.full, don't check
xfs_io's exit status]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
While the kill statement added in the previous patch usually
suffices to shut down the bash loop that runs the duperemove
processes, for whatever reason this sometimes fails to kill
duperemove. Kill the duperemove processes directly after removing
the run file, which should cause the bash loop to exit immediately.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Fix a race between _cleanup and dmeventd that causes the lvm
configuration not to be cleaned up and subsequent tests to fail.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Currently generic/519 takes around 5-10 minutes for me. This is
mainly due to the fact it uses a bunch of commands which spawn
processes. This, coupled by the fact the algorithm is O(n^2) in the
number of lines (624) for the sparse file and that test feels like
it's hung.
Fix this by re-implementing the existing logic in awk. This causes a
s single processes to be spawned and the rest of the processing is
done in-memory. This makes the test complete in 2 seconds for me.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The test currently fails on filesystems with a block size greater
than 4Kb, as dedupe operations fail with -EINVAL because the file
offsets used are not multiples of such block sizes (but they are
multiples of 4Kb, 2Kb and 1Kb).
So update the test to use offsets that are multiples of 64Kb, since
that allows the test to work on filesystems with any block size
between 4Kb and 64Kb (8Kb, 16Kb, 32Kb). Verified it works as
expected on kernels that have the fixes for the issue tested by this
test case (listed in the changelog of commit
91540ef980), and on systems without
those fixes (a 4.18 kernel), it fails as it is supposed to.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
For all the tests which require that quotas be disabled, remove the
quota mount options before mounting the scratch filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
On XFS, the _require_prjquota helper takes a path to a block device,
but (unintuitively) requires the block device to be mounted for the
detection to work properly. Fix the detection code in generic/506.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
generic/561 can take a very long time to run on XFS (45+ minutes)
because it kicks off fsstress and a lot of duperemove processes,
waits 50 seconds, and then waits for the duperemove processes to
finish. duperemove, however, fights with fsstress for file locks
and can take a very long time to make even a single pass over the
filesystem and exit, which means the test just takes forever to run.
Once we've decided to tear down the duperemove processes let's just send
them SIGINT and then wait for them to exit.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Old kernels do not support cross-device copy_file_range.
This is a regression test for kernel commit:
5dae222a5ff0 vfs: allow copy_file_range to copy across devices
[Amir] Split out cross-device copy_range test to a new test and
_notrun if kernel/filesystem do not support cross-device copy_range.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Test that copy_file_range will return the correct errors for various
error conditions and boundary constraints.
This is a regression test for kernel commit:
96e6e8f4a68d ("vfs: add missing checks to copy_file_range")
[Amir] Split out cross-device copy_range test and use only test dev.
Split out immutable/swapfile test cases to reduce the requirements to
run the bounds check to minimum and get coverage for more filesystems.
Remove the tests for read past EOF and write after chmod -r,
because we decided to stick with read(2)/write(2) semantics.
Add requirements needed for large size copy tests and fifo test.
Use existing char/block devices for char/block dev tests.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Now that we run the test for all block device based file systems, there
is no reason to keep it out of generic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Unexpectedly, 'xfs_io -f $file -c "pwrite 0 1M"' exits with failure
status if the file can't be created, but exits with success status if an
error occurs actually writing data. As discussed previously, xfs_io's
exit status has always been broken, and it will be difficult to fix:
https://marc.info/?l=linux-xfs&m=151269053129101&w=2
Because of this, generic/399 fails on ext4 if "-I 256" (256-byte inodes)
is specified in the mkfs options, e.g. with 'kvm-xfstests -c ext4/adv
generic/399'. This is because the test tries to fill a filesystem
entirely with 1 MiB encrypted files, and it expects the xfs_io commands
to start failing when no more files should be able to fit. But when the
filesystem supports in-inode xattrs, no blocks need to be allocated for
the encryption xattrs, so empty encrypted files can continue to be
created even after all the filesystem's blocks are in-use.
For better or worse, the convention for xfstests is to ignore the exit
status of xfs_io and instead rely on the printed error messages. Thus,
other tests don't run into this problem. So for now, let's fix the test
failure by making generic/399 do the same.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Ira Weiny
Chao Yu
Darrick J. Wong
Max Reitz
kaixuxia
Yang Xu
Eric Sandeen
Andreas Gruenbacher
Nikolay Borisov
Theodore Ts'o
Josef Bacik
Filipe Manana
Amir Goldstein
Christoph Hellwig
Eric Biggers