Enable shutdown tests on overlayfs. This requires configuring
overlayfs with TEST|SCRATCH_DEV pointing to block device, which act
as base fs of overlay. The legacy config (pointing TEST|SCRATCH_DEV
to existing directories) won't support shutdown.
Extend _require_scratch_shutdown() to deal with overlay by checking
shutdown support on $OVL_BASE_SCRATCH_MNT instead of $SCRATCH_MNT,
so we check shutdown support status against the underlying upper fs
of overlay.
Introduce new _scratch_shutdown() helper to do the actual shutdown
work and shutdown upper fs in the case of overlay. Also converting
existing bare 'src/godown' calls to use this helper to avoid false
failures when testing overlayfs.
generic/042 and generic/050 assume $SCRATCH_DEV to be a local
device, so add _require_local_device $SCRATCH_DEV rule.
[eguan: rewrite commit log]
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Fiemap gained support for passing in optional offset len which
denote the range requested, so this patch adds testcases for this
functionality. Aditionally, a special "ranged" argument is added to
the require_xfs_io_command which checks for the presence of fiemap
range support.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
There are some parameters added with xfs_io. Check if the pwrite
parameters are available. For some cases, xfs_io now returns
"command -%c not supported", so added "not supported" to count as
error.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In all of the places where we need check to see if mkfs.ext4 can
support a set of file system features, we also should be checking to
see if the kernel can support those file system features. So rename
_require_ext4_mkfs_feature to _require_scratch_ext4_feature, and
actually format the file system in $SCRATCH_DEV.
Also allow ext4/306 to run on systems where mke2fs doesn't support
the "64bit" option.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
If the UBSAN complains about bad behavior, we should capture the
dmesg so that developers can inspect it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Add a couple of tests to check that we don't leak inodes or dquots
if CoW recovery fails and therefore the mount fails.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In generic/459, if the DISCARD of the thin device somehow fails with
this message:
device-mapper: thin: Data device (dm-1) discard unsupported: Disabling discard passdown.
Then we can end up with arbitrary gunk in the thin device. This
causes mkfs to fail because it's afraid to format the device. Don't
be afraid, just zap it. FWIW mkfs.xfs thinks that the thinp device
has an xfs external log because sometimes the thinp device just
happen to be backed by the log of the previous test's scratch fs.
Fix this by making the _mkfs_dev helper always format the device,
per Eryu Guan's suggestion.
[eguan: fix subject to reflect the fix is in common/rc]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Add some helper functions to require that we can reload a given
module, and add a helper to actually do that. Refactor the existing
users to use the generics.
We need to hoist completely the behaviors of the old btrfs module
helper because we need to confirm before starting the test that we
actually can remove the module.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Move all the requirements checking for xfs_scrub into a helper function.
Make sure the helper properly detects the presence of the scrub ioctl
and situations where we can't run scrub (e.g. norecovery).
Refactor the existing three xfs_scrub call sites to use the helper to
check if it's appropriate to run scrub.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
A helper to mount with same options/mnt/dev of scratch mount, but
optionally with different lower/upper/work dirs.
use instead of _overlay_mount_dirs() in all tests where applicable.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Tests that use _overlay_mount_dirs() should also use the
default overlay mount options.
Move mount options from overlay_mount() into _overlay_mount_dirs()
and use helper common_dev_mount_opts() to get options.
OVERLAY_MOUNT_OPTIONS is assigned to MOUNT_OPTIONS, so
there is no need to use OVERLAY_MOUNT_OPTIONS directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
_scratch_mount_options() was not implemented correctly for
overlayfs and wasn't used by any overlay tests.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The name of the xfs_io scrub subcommand to test for the existence of
the ioctl has been changed to 'test' from 'dummy', so fix xfstests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When _require_xfs_io_command is passed command parameters,
the resulting error from invalid parameters may be ignored.
For example, the following bogus params would not abort the test:
_require_xfs_io_command "falloc" "-X"
_require_xfs_io_command "fiemap" "-X"
Fix this by looking for the relevant error message.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Some tests and common helpers don't properly clean up tmp files and
leave them behind in /tmp dir, and these tmp files are accumulating
over time.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
1) This pattern is repeated in several seek_data/hole tests
(e.g. generic/285, generic/436, generic/445 generic/448)
and generic/009. A common _ext4_disable_extent_zeroout()
helper could be added and applied by generic/009 and
_require_seek_data_hole().
2) On some old kernels(e.g. v3.1-v3.6), when vfs recognizes
SEEK_DATA/HOLE flag && ext4 has no extent zeroout tunable
in sysfs, these cases may trigger "sysfs entry not found"
issue. We can add check if extent_max_zeroout_kb exists
on ext4 filesystem.
The extent_max_zeroout_kb is introduced by:
'67a5da564f97 ("ext4: make the zero-out chunk size tunable")'
3) Declare several vars as local in _require_seek_data_hole().
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
As xfstests is no longer supported on IRIX, remove IRIX-specific code
from the common helper scripts.
[eguan: add _filter_devchar back as xfs/061 needs it]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Currently we just have this test run on a whitelist of filesystems,
but it would be best to be able to run it on all of them. The
problem is that a lot of filesystems basically shut down once they
hit metadata errors.
Allow the fsync-err testcase to operate in two different modes. One
mode just does basic testing to ensure that we get an error back on
all fd's when we fsync. The other does a more thorough test to
ensure that we get back 0 on subsequent fsyncs when there hasn't
been any write activity.
For now, we just opt-in to the more thorough testing on certain
filesystems: xfs, ext3 and ext4 on the generic test. All other
filesystems will run in simple mode.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Add support for jfs in _scratch_mkfs_sized. Fix the block size in
4096, which seems to be the only option in jfs_mkfs.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The helper is used to test if a specific filesystem feature can
be enabled. Currently only implemented testing overlayfs features.
Overalyfs features (e.g. redirect_dir, index) are configurable from
Kconfig (the build default), by module parameter (the system default)
and per mount using the mount option ${feature}=[on|off].
The helper is going to be used by overlay tests, which depend
on the inodes index feature.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Chengguang Xu
Nikolay Borisov
Goldwyn Rodrigues
Theodore Ts'o
Darrick J. Wong
Amir Goldstein
Andreas Gruenbacher
Eryu Guan
Xiao Yang
Ernesto A. Fernández
Eric Biggers
Jeff Layton