Regression test for commit:
3972f26 btrfs: update timestamps on truncate()
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
generic/193 runs the test in $here - the root of the xfstests source
tree/installation. IOWs, it doesn't test the filesystem on either
the TEST_DIR or SCRATCH_MNT, and so it not testing the filesystem
we think it is testing. Bad. Fixing this is the majority of the
change - introducing $test_root and $test_user for the files with
different owners, and then redirecting error output and filtering
the output appropriately.
And then add checks that truncate clears the suid/sgid bits
appropriately, something that has never been tested on XFS (and
likely other filesystems) so will cause kernels between 3.1 and 3.9
to assert fail as Dave Jones has recently reported.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In some configurations (e.g. 1 KB block size), ext4 can decide it is
better to zero out several blocks rather than splitting unwritten
extent. This changes results SEEK_HOLE / SEEK_DATA returns and thus the
test fails. Fix the problem by disabling the feature for this test.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The generic/286 test tests SEEK_HOLE and SEEK_DATA, and is reasonably
fast. We should just run the test by default.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Use the built-in _test_mount function from xfstests so it will use
the correct mount options for xfstests. The script used a simple
umount-and-mount sequence, which caused a test failure on an XFS
filesystem that used both realtime and external log devices.
Signed-off-by: Michael L. Semon <mlsemon35@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@rehat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
xfs was having issues with generic/311 because of caching issues. Make
_check_scratch_fs take an optional argument to use as the device to fsck.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Now in tests/ there are some test cases whose mode is 0644. But they
should be 0755. So fix it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Dave Chinner <david@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
supports seek data/hole operation or not. Here _require_seek_data_hole
is defined to do this work.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After finished test, temporarily fio config file should be removed.
This commit tries to fix this problem in the following test cases:
- generic/299-300
- ext4/301-304
- shared/305
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/233 attempts to direct output to tee, but instead of using a
pipe it uses an append operator. Hence it leaves a file named "tee"
in the root directory of the xfstests execution path. Just direct
the output to the $seqres.full file rather than trying to tee it
into the test output as well.
Reported-by: "Michael L. Semon" <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The -F flag to xfs_io originally enabled it to operate on non-xfs
filesystems. This restriction was removed upstream in favor of
gracefully failing on the handful of operations that actually
required xfs, and the option was deprecated.
However, xfstests is still used on distros with older xfsprogs, and
so "xfs_io -F" was necessary throughout xfstests.
Simplify this by appending -F to XFS_IO_PROG when it's needed -
i.e. if we're using old xfsprogs on a non-xfs filesystem.
This will eliminate errors when new tests leave out the -F, and
if and when -F is finally removed, there will be one central
location in xfstests to update.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
In one place of test 306, we mistakenly used /dev/null and /dev/zero
instead of equivalent devices created on tested filesystem. So we were
not really testing the functionality we intended.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
--
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
older xfs_io refused to write to /dev/null because it's
not a file on an xfs filesystem. So add -F.
While we're at it, add more testcases:
* symlink on a RO fs pointing to a file on a RW fs.
* bind-mounted rw file on an RO fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/131 attempts to kill processes that may no longer exist when
the test finishes and has a broken redirect for the error messages
and they end up in a file named "1" in the xfstests root instead of
/dev/null.
Not only that, the attempts to redirect stderr to stdout in the
middle of the test use incorrect redirect syntax, so they create an
empty file named "1" in the xfstests root...
IOWs, all the redirects in the test are broken. Fix them and clean
up the failure case to use the exit trap to trigger the cleanup
function....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/232 attempts to direct output to tee, but instead of using a
pipe it uses an append operator. Hence it leaves a file named "tee"
in the root directory of the xfstests execution path. Just direct
the output to the $seqres.full file rather than trying to tee it
into the test output as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test 310 fails with:
mkdir: cannot create directory `/mnt/test/tmp': File exists
$TEST_DIR is persistent, so test directories need to be created with
"mkdir -p" so they don't fail if the directory already exists.
Many other things need fixing, too.
- Tests should define directories they use on $TEST_DIR by
their sequence number, not generic names.
- Use a variable for the directory the test runs in
($SEQ_DIR, in this case) to avoid having to manually code
it everywhere.
- New binaries need to be added to .gitignore.
- Return status for shell functions is 0 for success,
non-zero for failure.
- Setting status=0 if there is no failure in the first test
means that even if the second test fails, the test will
still pass. Change the test to use "_fatal" when a kernel
bug is detected, and only set status=0 when the entire
test has finished.
- reduce the default runtime by to roughly a minute and
scale it with the stress load factor variables. In most
cases, this test is never going to hit problems (as
they've already been fixed) so running it for ~4 minutes
is mostly a waste of time...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
xfstests have some change on the organization of the testcases
and common* files:
* The common* scripts have been reorganized into the common/ dir.
* The testcases have been reorganized into sub test dirs under tests/.
* The run.* scripts have been removed.
This patch uses the simple way to make install support above changes:
Make up one Makefile for each newly created subdirs, which can control
'make install' separately.
v2 introduces the following changes compared with v1:
* Ignore the file 'group' under the top dir, for it's useless in the new
structures.
* Remove the redundant comments in the Makefiles.
* Use XXX_DIR instead of XXX_SUBDIR in the Makefiles under common/ and tests/.
* Export TESTS_DIR in teh top level Makefile instead of tests/Makefile.
* Obtain the names of dirs for testcases by iterating sub dirs under /tests,
not by enumeration in tests/Makefile.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com Minor modification to Makefile]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We use $seqres.full to record verbose output now, replace $seq.full with
$seqres.full in ext4/305 and generic/308.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Eryu Guan
Dave Chinner
Jan Kara
Theodore Ts'o
Michael L. Semon
Josef Bacik
Zheng Liu
Eric Sandeen
Rich Johnston
Zhao Hongjiang
Wang Sheng-Hui