Check with zero flags. This is what rename(2) and renameat(2) now
call, so this actually tests the behavior of these syscalls as well.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In commit 21723cdb, renumbering the test wasn't completed entirely,
leaving the output file with a wrong test number. It should be 022,
fix it.
[dchinner: Yup, my mistake. editted the commit message to reflect
that.]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/204 fails on device with Advanced Format of 4096 bytes per
physical sector and when partition starts at the 4K boundary/./In
this case filesystem sector/block size will be of 4096 bytes size
and _scratch_mkfs_sized fails because mkfs reports that 5Mb log size
is not enough to create a filesystem, for example attempt to make
filesystem on such partition:
mkfs.xfs -f -bsize=4096 -l size=5m -d size=109051904 /dev/sdb2"
results to:
"log size 1280 blocks too small, minimum size is 1605 blocks"
and generic/204 fails with ENOSPC before it has finished creating
the necessary files. Log size of 7MB is enough for this test to pass.
Signed-off-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are couple of tests in shared directory which really should be
made generic, so move it. It is mostly collapse range tests, which
really can be generic to make super we test every file system which adds
collapse range support.
Here is what we're moving in this commit.
shared/001 -> generic/021
shared/002 -> generic/022
shared/003 -> generic/012
shared/004 -> generic/016
shared/005 -> generic/017
shared/218 -> generic/018
shared/305 -> generic/019
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This is based on xfs/242. This is very similar to ext4/001 however this
test has some tweaks to make it work test zero range on generic file
system. This includes turning off ext4 extents zeroout and disabling
the test for xfs on systems where PAGE_SIZE > 4096.
It is testing extent tree manipulation with fallocate zero range
operation.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test for fallocate zero range at block boundary. This is similar to
the test xfs/290 however this one is generic and we're testing different
block sizes as well - namely 1k, 2k, 4k and 64k. Note that we're not
creating file systems with given block size buy rather test all 4
options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On a fast device like a ramdisk, kernel time may not have changed
between a stat of a file and some operation on it immediately
afterwards. Hence there is no guarantee that an operation actually
changes the timestamps of a file immediately after it is stat'd.
Hence, ensure that the times will change by sleeping for a second
between the initial stat that reads the timestamps and the
operations that is supposed to modify them. This way we ensure that
the timestamp will change if the filesystem is correctly
implemented.
While there, fix the indenting to be 8 space tabs and correct the
header which is missing the bash shell declaration and the test
number identifier.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tests the noatime, relatime, strictatime and nodiratime mount
options.
There is an extra check for Btrfs to ensure that the access time is
never updated on read-only subvolumes. (Regression test for bug
fixed with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The first test may start with the file from the previous test, and
that is in an unknown state. Hence always remove the test file
before the first test so that it doesn't have extents inside the
test range as it is supposed to be testing into a hole.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test 17 of _test_generic_punch uses the filesystem block size to do
a sub-single block punch. The result of this is a files of
different sizes and md5sums when the filesystem block size changes.
However the only difference in file contents if the length of the
file - the zeroed region is always in the same place. Hence we can
use hexdump rather than md5sum to check the output remains
consistent and the hole remains in the correct place despite the
changing block sizes.
Fix up all the golden output for all the tests that use this
function, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So this test does lots of fallocate/truncate noise while doing aio
overwrites to try and exercise a deadlock found in ext4. Because it
runs so hard with ENOSPC it can sometimes cause truncate to fail on
btrfs. This is ok and doesn't affect the validity of the test, we
just need to catch the output so it doesn't cause the test to fail.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The 'testfile' environment variable is initialized before the
xfstests environment is included into generic/313. TEST_DIR is not
defined at this point and causes the test to operate on the root.
Move the testfile initialization down after the general environment
is sourced.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In changing the default log sizes in mkfs, the freespace
calculations in generic/204 are no longer valid and so it fails with
ENOSPC before ti has finished creating the necessary files.. Make
the test use a fixed log size of 5MB for XFS so that freespace
calculations remain valid and the test passes regardless of whether
we have a new or old mkfs binary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Otherwise we end up with an ever-growing file for every test that is
run and that makes it hard to isolate failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Generic/314 can fail when the group write file mode bit for "subdir" does not
match that found in the golden output, as has been seen in ext4 regression
testing. It appears that the golden output for generic/314 was taken on a
system where the $qa_user's umask cleared that mode bit - most likely, where
the umask was 022. Depending upon the distro, it's not uncommon for a user's
default umask to have a different value, such as 002. When that's the case,
we get a false negative failure when the group write mode bit for "subdir" is
not cleared. This failure is unrelated to the value of the SGID mode bit
that is the object of this test.
We could either require that $qa_user's account be configured in advance with
a umask of 022, or explicitly set a umask value compatible with the golden
output when creating "subdir". The latter option is more robust.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/240
Date: Wed, 11 Dec 2013 11:21:28 -0000
From: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
If we execute generic/240 on a fs which has its fs block size greater
than 64k (for example, NFS), this test will fail with:
io_submit failed: Invalid argument
This will happen because in src/aio-dio-regress/aiodio_sparse2.c this
expression
num_aio = filesize / step;
will set num_aio to 0 and this means that no io_prep_write() will happen
before calling io_submit().
Fixing filesize to be 8 * "fs block size".
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
While running xfstest 280, we occasionally got such error:
setquota: Cannot set quota for user 0 from kernel on
/dev/mapper/xfstests-disk1: No such device
setquota: Cannot write quota for 0 on /dev/mapper/xfstests-disk1: No such
device
setquota calls syscall quotactl, and the kernel will wait for the filesystem
to unfreeze and then performs command. Then kernel will double check if the
device is still mounted. If not, an ENODEV will be thrown.
While in the testcase, unfreeze and umount might be so close that the device
got umounted before quotactl is performed.
Reported-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Btrfs was screwing up rename+fsync, add some regression tests for
the various scenarios it was screwing up.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Btrfs had some issues with fsync()'ing directories and fsync()'ing
after renames. These three new tests cover the 3 different issues
we were seeing. This breaks out the dmflakey stuff into a common
helper to be shared between generic/311 and this new test.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/273 factors the "space available" output from df into the
calculation for the size of the origin data set. Recent commit
bfdd1e72b3 xfstests: added -P option to $DF_PROG
... converted the use of 'df' to $DF_PROG. This implicitly adds the
-T parameter to add the fs type column, shifts the available space
column over by one and unintentionally causes 273 to look at "used
space" and create too small of a data set for a useful test.
Realign to the available space value.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For historical reasons beyond my knowledge xfstests tries to abuse the
scratch device as test device for nfs and udf. Because not all test
have inherited the right usage of the _setup_testdir and _cleanup_testdir
helpers this leads to lots of unessecary test failures.
Remove the special casing, which gets nfs down to a minimal number of
failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Sugned-off-by: Dave Chinner <david@fromorbit.com>
Miklos Szeredi
Lukas Czerner
Alexander Tsvetkov
Christoph Hellwig
Dmitry Monakhov
Dave Chinner
Koen De Wit
Josef Bacik
Brian Foster
Dave Chinner
Eric Whitney
Stanislav Kholmanskikh
Guangyu Sun
Josef Bacik