We don't need to make a full-sized file system in order to test
whether "mkfs.ext4 -O bigalloc" works.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Using "yes | mkfs.ext4 ..." results in the error message results in
the test failing, at least for some versions of e2fsprogs:
+yes: standard output: Broken pipe
+yes: write error
It better to use the -F option, which will eliminate the questions.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
A buffer use after free race was discovered in the XFS log recovery
codepath if I/O failures occur during recovery. The I/O submission path
can abort the mount and release the only reference held on some buffers
before I/O completion processing (e.g., async workqueue processing)
might have completed. Badness ensues if the I/O completion path
subsequently attempts to access said buffers.
The test manufactures the race by forcing all writes to fail (via
dm-flakey) after a fixed period of time. A delay is inserted into the
mount codepath to synchronize write failures with log recovery.
Credit for discovery of the race and definition of the reproducible test
case goes to Alex Lyakas.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
_require_xfs_sysfs() currently assumes that all sysfs attributes reside
under a device-specific subdirectory in the XFS sysfs hierarchy. It is
hardcoded to use the TEST_DEV mount and expect the relative attribute
path as a parameter.
Not all sysfs attributes are associated with specific devices or mount
points, however. Remove the hardcoded device name part of the attribute
path from _require_xfs_sysfs() and let the caller construct the relative
path based on the sysfs XFS root directory.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some file system configurations don't support fallocate, which is
required for e4defrag to run. So add a _require_xfs_io_command to
prevent a test failure if fallocate isn't supported in (for example)
ext3 compatibility mode.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by a btrfs issue where a ranged fsync would
prevent a subsequent fsync from persisting any extents that were
dirty at the time of the first fsync but that were outside the range
of that first fsync (which should have been persisted by the second
fsync).
This bug in btrfs is fixed by the following linux kernel patch:
Btrfs: fix fsync data loss after a ranged fsync
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
CIFS/SMB protocol without POSIX extensions doesn't support operations
with symbolic links and advisory byte-range locks from the same process.
Add checks these features and use them in generic tests that require
such operations.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pass -cifs argument from the command line to enable cifs testing
for $TEST_DEV. Also mention CIFS and missed UDF in README.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The existing code calls remount for $TEST_DEV with constantly defined
mount options. This can fail if a user specifies different mount options.
Fix this by using new _test_remount() call that remounts $TEST_DEV.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Check data integrity and layout stability during defrag compacting
EXT4_IOC_MOVE_EXT swap extents between target and donor inode.
If ioctl was performed twice then inode's layout should not change.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
EXT4_IOC_MOVE_EXT requires both files has same offset inside page
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently default block size is frozen to 4096 which is bad for
various reasons. e.g:
1) It ignores MKFS_OPT
2) Does not work for architectures where PG_SIZE != 4096
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
New xfs_repair programs have a different sunit/swidth warning that
is triggering failures such as:
-Note - stripe unit (0) and width (0) fields have been reset.
-Please set with mount -o sunit=<value>,swidth=<value>
+Note - stripe unit (0) and width (0) were copied from a backup superblock.
+Please reset with mount -o sunit=<value>,swidth=<value> if necessary
Update the filter to catch both cases and output the old message so
tests pass again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some tests deliberately corrupt scratch devices and so will fail
the post-test check. Add a "_require_scratch_nocheck" helper
function for such tests to avoid false test failure detection.
Also, ensure that _notrun cleans up the trigger for the post-test
checks. Otherwise the next test to run may try to validate the
scratch/test devices even though they are not used by the test.
Further, _check_xfs_filesystem() causes check to exit if it finds a
corruption. This is extremely annoying as it terminates the entire
test run rather than just reporting that the test fails. Hence add
an "iam != check" test before exiting so that calls from tests will
cause the test to fail, but calls from check won't cause the harness
to exit.
There are still some tests that fail the scratch check, these are
not obvious test failures and so need further investigation to
determine the cause of the failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add _require_xfs_io_command "fiemap" to test 225 to properly handle the
situation when fiemap isn't supported by the filesystem.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If udev is not present, we need to run "dmsetup mknodes" to make sure
/dev/mapper/flakey-test is created or destroyed as appropriate. On a
system with udev, running "dmsetup mknodes" will be a no-op.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need a source of "filler" that can fill up a 50M file system.
Unfortunately, on some systems /lib/modules might not exist at all.
In that case, use /usr instead.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When building statically, -lgdbm_compat will not automatically pull in
-lgdbm. So this needs to be specified explicitly in AC_CHECK_LIB and
in the list of libraries passed to the linker.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously, xfstests checked for chacl in only a few hard-coded
directory: /bin, /sbin, and /usr/bin. Use set_prog_path to allow
chacl to be in any directory in $PATH, which is how we find the
executable path for most other executables.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for a btrfs issue where we create a RO snapshot
to use for a send operation, which fails with a -ESTALE error,
due to the presence of orphan inodes accessible through the
snapshot's commit root but no longer present through the main
root.
This issue is fixed by the following linux kernel btrfs patch:
Btrfs: update commit root on snapshot creation after orphan cleanup
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
EXT4_MOVE_EXTENT is ready to support case where orig_offset != donor_offset.
This case is usable for compacting small files together.
Test generate file hierarchy via fsstress and then compact all files
to one adjacent block.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Theodore Ts'o
Brian Foster
Filipe Manana
Pavel Shilovsky
Dmitry Monakhov
Dave Chinner
Jan Kara