I saw "new" failed the TEST_DEV/SCRATCH_DEV validation when TEST_DEV or
SCRATCH_DEV points to directory, which is needed in overlayfs testing.
"new" only generates test template and doesn't need common/config to
parse and validate TEST_DEV/SCRATCH_DEV etc., so just returns after
setting all needed commands.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently changing the devices used by "USE_EXTERNAL" environmental
variable is not supported by the config section parsing. Add the
functionality so that we can use config sections to test external
device configs successfully.
This required tracking down a bug in _check_xfs_filesystem() which
was causing a log device to be passed to a test device without an
external log device. This was caused by an uninitialised variable in
the function. I also added full output file removals to the first
couple of generic tests that were failing, because that's where the
check failure output ends up in this case.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Adding basic overlayfs support to fstests, it doesn't test anything
overlayfs specific, but runs existing tests on top of overlayfs. It's
following the path from Eric's patchset and Zab's review back in Mar.
A new fstype "overlay" is added, and TEST_DEV/SCRATCH_DEV are required
to be fs paths, and overlayfs is mounted at TEST_DIR/SCRATCH_MNT, so
tests can be run there.
To test overlayfs, setup config as something like the following
TEST_DEV=/mnt/ovl/test
TEST_DIR=/mnt/testarea/test
SCRATCH_DEV=/mnt/ovl/scratch
SCRATCH_MNT=/mnt/testarea/scratch
then run
./check -overlay -g auto
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On unpatched kernel, converting file with a hole at the beginning to
non-extent based format results in ext4 i_blocks corruption. Add a new
regression test case for it.
These two commits fixed the corruption:
ext4: be more strict when migrating to non-extent based file
ext4: correctly migrate a file with a hole at the beginning
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Call 'udevadm settle' or 'udevsettle' or 'sleep 1' to make sure new lv
is ready for use before making filesystem on it, depends on which
command is available on the system.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the change to CRCs by default, some tests are updated to call mkfs
with "-m crc=0" option directly, and this breaks testings on older
distros where mkfs.xfs doesn't have crc support.
Introduce a new variable to tell if mkfs.xfs supports v5 xfs and do
tweaks in _scratch_mkfs_xfs_opts() based on it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Full DM snapshot devices can return unexpected errors from the
underlying device, and this causes problems for filesystems. In
particular, xfs used to panic in this test, (fixed by commit 8d6c121
"xfs: fix buffer use after free on IO error"), and on current
4.0-rc3 kernels both ext4 and btrfs trigger WARNINGs.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch defines logstate by adding dump.f2fs for f2fs's clean and
dirty logs. This macro is added into:
xfs/085
xfs/086
xfs/087
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test case will first use fsstress to fill a file system, then
dump it to standard output and restore it from standard input, finally
check that the original contents and the new contents generated by
restore tool will be same.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use appropriate environment variable (XFSDUMP_PROG) instead of
hardcoding 'xfsdump' name. Also make the test fail graciously when
xfsdump isn't installed.
We also make XFSDUMP_PROG be equal to empty string instead of -e when
xfsdump isn't installed. The changes require some tweaking to output
filtering since full command path now appears in the output.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Testing if FSSTRESS_PROG is a null string dosen't make sense because
it has just been set.
Here fix it by testing if it is an executable file.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pass -cifs argument from the command line to enable cifs testing
for $TEST_DEV. Also mention CIFS and missed UDF in README.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously, xfstests checked for chacl in only a few hard-coded
directory: /bin, /sbin, and /usr/bin. Use set_prog_path to allow
chacl to be in any directory in $PATH, which is how we find the
executable path for most other executables.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the new config stuff we lost the selinux options being set for systems with
selinux turned on. We want the selinux context set all the time, wether we
provide a MOUNT_OPTIONS value or not, so take this logic out of _mount_opts()
and just put it in the body of common/config
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
All commands run as $qa_user should use a relative path so that
missing access permissions on $HOME for root don't prevent running
it. This fixes common/233 for me.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Functions like _mount_opts(), _mkfs_opts() and _fsck_opts() are
defined both in common/rc and common/config while used only in
common/config.
Remove those functions from common/rc and update _mount_opts() to match
the superior version of the function.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there is a problem with parse_config_section() when the
configuration value contains equality sign like this for example:
MOUNT_OPTIONS="-o data=journal"
the result will be
export MOUNT_OPTIONS="-o data="journal"
which is not going to work. The reason is that the expression used to
parse the configuration options uses greedy matching '.*'. Fix this by
using non greedy expression to match the first equality sign '[^=]'.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently if the FSTYP is not set, the code to get FSTYP using blikd
would not work. This is because we're using HOSTOS environment variable
which might not be set (at least not on my system) and because it's
already late in the code path.
Fix this by using OSTYP environment variable as a fallback in the case
that HOSTOS does not work and move the check to common/config.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the case that we already have sections in the config file we
have to make sure that we unset SCRATCH_DEV if it has been deduced from
the SCRATCH_DEV_POOL so that it does not complain about SCRATCH_DEV in
this case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Eryu Guan
Dave Chinner
Jia He
Jaegeuk Kim
Dushan Tcholich
Xiaoguang Wang
Jan Kara
Wang Shilong
Theodore Ts'o
Pavel Shilovsky
Josef Bacik
hch@infradead.org
Lukas Czerner