xtink4/crosspoint-reader
0
0 Fork 0
mirror of https://github.com/crosspoint-reader/crosspoint-reader.git synced 2026-08-13 14:21:57 -07:00
Code Issues Packages Projects Releases Wiki Activity
Files
chore/swallow-event-cleanup
crosspoint-reader/platformio.ini
T
Uri Tauber d4733bfc65 chore: split GH build action (#2901) 
## Summary

Build action take too much time.
Lets see if splitting it to two seperate action would speed things up.

---

### AI Usage

While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.

Did you use AI tools to help write this code? _**< PARTIALLY >**_
2026-08-09 03:55:33 -04:00

227 lines
8.1 KiB
INI
Raw Permalink Blame History

[platformio]
default_envs = default
build_cache_dir = .cache
extra_configs = platformio.local.ini
[crosspoint]
version = 1.5.0
[base]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.37/platform-espressif32.zip
board = esp32-c3-devkitm-1
framework = arduino
monitor_speed = 115200
upload_speed = 921600
check_tool = cppcheck
; missingInclude (project headers) is suppressed alongside missingIncludeSystem: on a
; fresh CI checkout cppcheck has no resolved include paths, so it reports every
; project header as missing (~400 information-level lines) and fails the job.
check_flags = --enable=all --suppress=missingIncludeSystem --suppress=missingInclude --suppress=unusedFunction --suppress=unmatchedSuppression --suppress=*:*/.pio/* --inline-suppr
check_skip_packages = yes
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_upload.offset_address = 0x10000
build_flags =
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DEINK_DISPLAY_SINGLE_BUFFER_MODE=1
-DDISABLE_FS_H_WARNING=1
-DDESTRUCTOR_CLOSES_FILE=1
# https://libexpat.github.io/doc/api/latest/#XML_GE
-DXML_GE=0
-DXML_CONTEXT_BYTES=1024
-std=gnu++2a
# Enable UTF-8 long file names in SdFat
-DUSE_UTF8_LONG_NAMES=1
# Increase PNG scanline buffer to support up to 2048px wide images
# Default is (320*4+1)*2=2562, we need more for larger images
-DPNG_MAX_BUFFERED_PIXELS=16416
-DFREEINK_NET_WOLFSSL=1
-DWOLFSSL_USER_SETTINGS
-DWOLFSSL_OPTIONS_H
-DWOLFSSL_CLIENT_EXAMPLE
-DWOLFSSL_TLS13
# MEMFIX-PORT: single-precision ECC (sp_c32.c). Without it every P-256 operation
# (TLS 1.3 key_share keygen, ECDHE, ECDSA cert verify) runs on fast-math bignums
# that WOLFSSL_SMALL_STACK heap-allocates at FP_MAX_BITS size -- tens of KB of
# temporaries, which OOMs (MP_MEM) at the ~50KB free heap a reading session
# leaves. SP uses fixed 256-bit arrays: a few KB, and several times faster.
# SP_SMALL trades the large precomputed point tables for smaller flash.
-DWOLFSSL_HAVE_SP_ECC
-DWOLFSSL_SP_SMALL
# Arduino-wolfSSL's user_settings.h enables TLS extensions, supported curves,
# HKDF, and RSA-PSS when WOLFSSL_TLS13 is set. Do not repeat those defines here:
# GCC reports every library translation unit as a macro redefinition.
-DHAVE_FFDHE_2048
-DHAVE_CURVE25519
-DHAVE_SNI
-Wno-bidi-chars
-Wl,--wrap=panic_print_backtrace,--wrap=panic_abort,--wrap=bootloader_common_check_efuse_blk_validity
-fno-exceptions
build_unflags =
-std=gnu++11
-fexceptions
; Board configuration
board_build.flash_mode = dio
board_build.flash_size = 16MB
board_build.partitions = partitions.csv
; MEMFIX-PORT: custom_sdkconfig heap reclamation (~32-37 KB). Rebuilds the
; Arduino core libs on first build (slower once, cached after; needs the CMake
; pin in platformio.local.ini on macOS).
;
; If an interrupted rebuild fails with "multiple definition of 'app_main'"
; (stale generated scaffold), clean it up with:
; rm -rf .dummy CMakeLists.txt sdkconfig.default sdkconfig.defaults .pio/build/default
; Do NOT use `git clean -fdX` — it deletes platformio.local.ini.
custom_sdkconfig =
; Task stack right-sizing from measured high-water marks (heap block map +
; per-task stack audit, July 2026): esp_timer used ~0.8 KB of 8 KB across
; every capture; the FreeRTOS timer service used ~0.5 KB
; of 4 KB. Neither runs TLS or app code. ~7 KB back to the heap.
CONFIG_ESP_TIMER_TASK_STACK_SIZE=4096
CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2560
; Move the WiFi stack's non-critical hot paths out of IRAM into flash.
; On the C3, IRAM and DRAM share one SRAM pool, so the ~25-30 KB this
; frees lands directly in the heap — paid for with lower WiFi throughput
; during transfers (occasional sync/OTA use, not streaming: acceptable).
; IRAM cost is static, so the heap gain applies even with WiFi off.
CONFIG_ESP_WIFI_IRAM_OPT=n
CONFIG_ESP_WIFI_RX_IRAM_OPT=n
; Keep the Arduino wrappers for the removed cloud components (below) out of
; the core source list; all other bundled libraries default to enabled.
CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
CONFIG_ARDUINO_SELECTIVE_RainMaker=n
CONFIG_ARDUINO_SELECTIVE_Insights=n
; ESP_SR (speech recognition) only exists in the S3 core; its wrapper includes
; ESP_I2S.h, which the isolated core rebuild can't resolve. Unused here anyway,
; so drop it or the sticky env fails to build.
CONFIG_ARDUINO_SELECTIVE_ESP_SR=n
; Drop unused cloud components from the core rebuild. esp_insights/rainmaker
; require embedded server certs the lib builder can't generate
; ("https_server.crt.S not found"); this firmware uses none of them.
custom_component_remove =
espressif/esp_insights
espressif/esp_rainmaker
espressif/esp_diagnostics
espressif/esp_diag_data_store
espressif/esp_schedule
espressif/esp_rcp_update
espressif/esp_secure_cert_mgr
espressif/cbor
extra_scripts =
pre:scripts/patch_wolfssl.py
pre:scripts/build_html.py
pre:scripts/gen_i18n.py
pre:scripts/git_branch.py
pre:scripts/patch_jpegdec.py
post:scripts/register_unit_tests_target.py
; Libraries
lib_deps =
BatteryMonitor=symlink://freeink-sdk/libs/hardware/BatteryMonitor
InputManager=symlink://freeink-sdk/libs/hardware/InputManager
EInkDisplay=symlink://freeink-sdk/libs/display/FreeInkDisplay
SDCardManager=symlink://freeink-sdk/libs/hardware/SDCardManager
BoardConfig=symlink://freeink-sdk/libs/hardware/BoardConfig
XteinkDetect=symlink://freeink-sdk/libs/hardware/XteinkDetect
PowerManager=symlink://freeink-sdk/libs/hardware/PowerManager
Rtc=symlink://freeink-sdk/libs/hardware/Rtc
Imu=symlink://freeink-sdk/libs/hardware/Imu
SecureNet=symlink://freeink-sdk/libs/network/SecureNet
FreeInkUI=symlink://freeink-sdk/libs/ui/FreeInkUI
Icons=symlink://freeink-sdk/libs/assets/Icons
bblanchon/ArduinoJson @ 7.4.2
ricmoo/QRCode @ 0.0.1
bitbank2/PNGdec @ 1.1.6
https://github.com/bitbank2/JPEGDEC.git#86282979224c8a32fd51e091ed5a35b0c699a52b
links2004/WebSockets @ 2.7.3
wolfssl/Arduino-wolfSSL @ 5.7.2
lib_ignore =
BLE
[env:default]
extends = base
build_flags =
${base.build_flags}
; CROSSPOINT_VERSION is set by scripts/git_branch.py (includes branch + short SHA)
-DFREEINK_DEVICE_X4=1
-DFREEINK_DEVICE_X3=1
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=2 ; Set log level to debug for development builds
[env:gh_release]
extends = base
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_X4=1
-DFREEINK_DEVICE_X3=1
-DCROSSPOINT_VERSION=\"${crosspoint.version}\"
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=1 ; Set log level to info for release builds
[env:gh_release_rc]
extends = base
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_X4=1
-DFREEINK_DEVICE_X3=1
-DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=1 ; Set log level to info for release candidate builds
[env:slim]
extends = base
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_X4=1
-DFREEINK_DEVICE_X3=1
-DCROSSPOINT_VERSION=\"${crosspoint.version}-slim\"
; serial output is disabled in slim builds to save space
-UENABLE_SERIAL_LOG
; --- Seeed Sticky — ESP32-S3R8, 3.97" 800x480 SSD1677 + GT911 touch -----------
; Different MCU family than the C3 envs (one binary per family). The SDK
; auto-enables CAP_TOUCH (GT911) and the BQ27220 gauge for this device; PSRAM is
; intentionally left off (48KB framebuffer fits in DRAM, same as X4).
; pio run -e sticky -t upload
[env:sticky]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_STICKY=1
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=2
[env:sticky-gh_release]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_STICKY=1
-DCROSSPOINT_VERSION=\"${crosspoint.version}\"
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=1 ; Set log level to info for release builds
[env:sticky-gh_release_rc]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
${base.build_flags}
-DFREEINK_DEVICE_STICKY=1
-DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
-DENABLE_SERIAL_LOG
-DLOG_LEVEL=1 ; Set log level to info for release candidate builds
Reference in new issue View Git Blame Copy Permalink