gecko/ipc/unixsocket/SocketBase.h

/* -*- Mode: c++; c-basic-offset: 2; indent-tabs-mode: nil; tab-width: 40 -*- */
/* vim: set ts=2 et sw=2 tw=80: */

/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 */

#ifndef mozilla_ipc_SocketBase_h
#define mozilla_ipc_SocketBase_h

#include "base/message_loop.h"
#include "nsAutoPtr.h"
#include "nsTArray.h"
#include "nsThreadUtils.h"

namespace mozilla {
namespace ipc {

//
// UnixSocketBuffer
//

/**
 * |UnixSocketBuffer| implements a FIFO buffer that stores raw socket
 * data, either for sending on a socket or received from a socket.
 */
class UnixSocketBuffer
{
public:
  virtual ~UnixSocketBuffer();

  const uint8_t* GetData() const
  {
    return mData + mOffset;
  }

  size_t GetSize() const
  {
    return mSize - mOffset;
  }

  const uint8_t* Consume(size_t aLen);

  nsresult Read(void* aValue, size_t aLen);

  nsresult Read(int8_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  nsresult Read(uint8_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  nsresult Read(int16_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  nsresult Read(uint16_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  nsresult Read(int32_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  nsresult Read(uint32_t& aValue)
  {
    return Read(&aValue, sizeof(aValue));
  }

  uint8_t* Append(size_t aLen);

  nsresult Write(const void* aValue, size_t aLen);

  nsresult Write(int8_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

  nsresult Write(uint8_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

  nsresult Write(int16_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

  nsresult Write(uint16_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

  nsresult Write(int32_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

  nsresult Write(uint32_t aValue)
  {
    return Write(&aValue, sizeof(aValue));
  }

protected:

  /* This constructor copies aData of aSize bytes length into the
   * new instance of |UnixSocketBuffer|.
   */
  UnixSocketBuffer(const void* aData, size_t aSize);

  /* This constructor reserves aAvailableSpace bytes of space.
   */
  UnixSocketBuffer(size_t aAvailableSpace);

  size_t GetLeadingSpace() const
  {
    return mOffset;
  }

  size_t GetTrailingSpace() const
  {
    return mAvailableSpace - mSize;
  }

  size_t GetAvailableSpace() const
  {
    return mAvailableSpace;
  }

  void* GetTrailingBytes()
  {
    return mData + mSize;
  }

  uint8_t* GetData(size_t aOffset)
  {
    MOZ_ASSERT(aOffset <= mSize);

    return mData + aOffset;
  }

  void SetRange(size_t aOffset, size_t aSize)
  {
    MOZ_ASSERT((aOffset + aSize) <= mAvailableSpace);

    mOffset = aOffset;
    mSize = mOffset + aSize;
  }

  void CleanupLeadingSpace();

private:
  size_t mSize;
  size_t mOffset;
  size_t mAvailableSpace;
  nsAutoArrayPtr<uint8_t> mData;
};

//
// UnixSocketIOBuffer
//

/**
 * |UnixSocketIOBuffer| is a |UnixSocketBuffer| that supports being
 * received on a socket or being send on a socket. Network protocols
 * might differ in their exact usage of Unix socket functions and
 * |UnixSocketIOBuffer| provides a protocol-neutral interface.
 */
class UnixSocketIOBuffer : public UnixSocketBuffer
{
public:
  virtual ~UnixSocketIOBuffer();

  /**
   * Receives data from aFd at the end of the buffer. The returned value
   * is the number of newly received bytes, or 0 if the peer shut down
   * its connection, or a negative value on errors.
   */
  virtual ssize_t Receive(int aFd) = 0;

  /**
   * Sends data to aFd from the beginning of the buffer. The returned value
   * is the number of bytes written, or a negative value on error.
   */
  virtual ssize_t Send(int aFd) = 0;

protected:

  /* This constructor copies aData of aSize bytes length into the
   * new instance of |UnixSocketIOBuffer|.
   */
  UnixSocketIOBuffer(const void* aData, size_t aSize);

  /* This constructor reserves aAvailableSpace bytes of space.
   */
  UnixSocketIOBuffer(size_t aAvailableSpace);
};

//
// UnixSocketRawData
//

class UnixSocketRawData final : public UnixSocketIOBuffer
{
public:
  /* This constructor copies aData of aSize bytes length into the
   * new instance of |UnixSocketRawData|.
   */
  UnixSocketRawData(const void* aData, size_t aSize);

  /* This constructor reserves aSize bytes of space. Currently
   * it's only possible to fill this buffer by calling |Receive|.
   */
  UnixSocketRawData(size_t aSize);

  /**
   * Receives data from aFd at the end of the buffer. The returned value
   * is the number of newly received bytes, or 0 if the peer shut down
   * its connection, or a negative value on errors.
   */
  ssize_t Receive(int aFd) override;

  /**
   * Sends data to aFd from the beginning of the buffer. The returned value
   * is the number of bytes written, or a negative value on error.
   */
  ssize_t Send(int aFd) override;
};

enum SocketConnectionStatus {
  SOCKET_DISCONNECTED = 0,
  SOCKET_LISTENING = 1,
  SOCKET_CONNECTING = 2,
  SOCKET_CONNECTED = 3
};

//
// SocketBase
//

class SocketBase
{
public:
  NS_INLINE_DECL_THREADSAFE_REFCOUNTING(SocketBase)

  SocketConnectionStatus GetConnectionStatus() const;

  int GetSuggestedConnectDelayMs() const;

  /**
   * Queues the internal representation of socket for deletion. Can be called
   * from main thread.
   */
  virtual void Close() = 0;

  /**
   * Callback for socket connect/accept success. Called after connect/accept has
   * finished. Will be run on main thread, before any reads take place.
   */
  virtual void OnConnectSuccess() = 0;

  /**
   * Callback for socket connect/accept error. Will be run on main thread.
   */
  virtual void OnConnectError() = 0;

  /**
   * Callback for socket disconnect. Will be run on main thread.
   */
  virtual void OnDisconnect() = 0;

  /**
   * Called by implementation to notify consumer of success.
   */
  void NotifySuccess();

  /**
   * Called by implementation to notify consumer of error.
   */
  void NotifyError();

  /**
   * Called by implementation to notify consumer of disconnect.
   */
  void NotifyDisconnect();

protected:
  SocketBase();
  virtual ~SocketBase();

  void SetConnectionStatus(SocketConnectionStatus aConnectionStatus);

private:
  uint32_t CalculateConnectDelayMs() const;

  SocketConnectionStatus mConnectionStatus;
  PRIntervalTime mConnectTimestamp;
  uint32_t mConnectDelayMs;
};

//
// SocketIOBase
//

/**
 * |SocketIOBase| is a base class for Socket I/O classes that
 * perform operations on the I/O thread.
 */
class SocketIOBase
{
public:
  virtual ~SocketIOBase();

  /**
   * Implemented by socket I/O classes to return the current instance of
   * |SocketBase|.
   *
   * @return The current instance of |SocketBase|
   */
  virtual SocketBase* GetSocketBase() = 0;

  /**
   * Implemented by socket I/O classes to signal that the socket I/O class has
   * been shut down.
   *
   * @return True if the socket I/O class has been shut down, false otherwise.
   */
  virtual bool IsShutdownOnIOThread() const = 0;

  /**
   * Implemented by socket I/O classes to signal that socket class has
   * been shut down.
   *
   * @return True if the socket class has been shut down, false otherwise.
   */
  virtual bool IsShutdownOnMainThread() const = 0;

  /**
   * Signals to the socket I/O classes that it has been shut down.
   */
  virtual void ShutdownOnIOThread() = 0;

  /**
   * Signals to the socket I/O classes that the socket class has been
   * shut down.
   */
  virtual void ShutdownOnMainThread() = 0;

protected:
  SocketIOBase();
};

//
// Socket I/O runnables
//

/* |SocketIORunnable| is a runnable for sending a message from
 * the I/O thread to the main thread.
 */
template <typename T>
class SocketIORunnable : public nsRunnable
{
public:
  virtual ~SocketIORunnable()
  { }

  T* GetIO() const
  {
    return mIO;
  }

protected:
  SocketIORunnable(T* aIO)
  : mIO(aIO)
  {
    MOZ_ASSERT(aIO);
  }

private:
  T* mIO;
};

/**
 * |SocketIOEventRunnable| reports the connection state on the
 * I/O thread back to the main thread.
 */
class SocketIOEventRunnable final : public SocketIORunnable<SocketIOBase>
{
public:
  enum SocketEvent {
    CONNECT_SUCCESS,
    CONNECT_ERROR,
    DISCONNECT
  };

  SocketIOEventRunnable(SocketIOBase* aIO, SocketEvent aEvent);

  NS_IMETHOD Run() override;

private:
  SocketEvent mEvent;
};

/**
 * |SocketIORequestClosingRunnable| closes an instance of |SocketBase|
 * to the main thread.
 */
class SocketIORequestClosingRunnable final
  : public SocketIORunnable<SocketIOBase>
{
public:
  SocketIORequestClosingRunnable(SocketIOBase* aIO);

  NS_IMETHOD Run() override;
};

/**
 * |SocketIODeleteInstanceRunnable| deletes an object on the main thread.
 */
class SocketIODeleteInstanceRunnable final : public nsRunnable
{
public:
  SocketIODeleteInstanceRunnable(SocketIOBase* aIO);

  NS_IMETHOD Run() override;

private:
  nsAutoPtr<SocketIOBase> mIO;
};

//
// Socket I/O tasks
//

/* |SocketIOTask| holds a reference to a Socket I/O object. It's
 * supposed to run on the I/O thread.
 */
template<typename Tio>
class SocketIOTask : public CancelableTask
{
public:
  virtual ~SocketIOTask()
  { }

  Tio* GetIO() const
  {
    return mIO;
  }

  void Cancel() override
  {
    mIO = nullptr;
  }

  bool IsCanceled() const
  {
    return !mIO;
  }

protected:
  SocketIOTask(Tio* aIO)
    : mIO(aIO)
  {
    MOZ_ASSERT(mIO);
  }

private:
  Tio* mIO;
};

/**
 * |SocketIOShutdownTask| signals shutdown to the socket I/O class on
 * the I/O thread and sends it to the main thread for destruction.
 */
class SocketIOShutdownTask final : public SocketIOTask<SocketIOBase>
{
public:
  SocketIOShutdownTask(SocketIOBase* aIO);

  void Run() override;
};

}
}

#endif