gecko/security/nss/cmd/certutil/certutil.c
2009-04-07 03:36:45 +02:00

2986 lines
96 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
** certutil.c
**
** utility for managing certificates and the cert database
**
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#if defined(WIN32)
#include "fcntl.h"
#include "io.h"
#endif
#include "secutil.h"
#if defined(XP_UNIX)
#include <unistd.h>
#endif
#include "nspr.h"
#include "prtypes.h"
#include "prtime.h"
#include "prlong.h"
#include "pk11func.h"
#include "secasn1.h"
#include "cert.h"
#include "cryptohi.h"
#include "secoid.h"
#include "certdb.h"
#include "nss.h"
#include "certutil.h"
#define MIN_KEY_BITS 512
/* MAX_KEY_BITS should agree with MAX_RSA_MODULUS in freebl */
#define MAX_KEY_BITS 8192
#define DEFAULT_KEY_BITS 1024
#define GEN_BREAK(e) rv=e; break;
char *progName;
static CERTCertificateRequest *
GetCertRequest(PRFileDesc *inFile, PRBool ascii)
{
CERTCertificateRequest *certReq = NULL;
CERTSignedData signedData;
PRArenaPool *arena = NULL;
SECItem reqDER;
SECStatus rv;
reqDER.data = NULL;
do {
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if (arena == NULL) {
GEN_BREAK (SECFailure);
}
rv = SECU_ReadDERFromFile(&reqDER, inFile, ascii);
if (rv) {
break;
}
certReq = (CERTCertificateRequest*) PORT_ArenaZAlloc
(arena, sizeof(CERTCertificateRequest));
if (!certReq) {
GEN_BREAK(SECFailure);
}
certReq->arena = arena;
/* Since cert request is a signed data, must decode to get the inner
data
*/
PORT_Memset(&signedData, 0, sizeof(signedData));
rv = SEC_ASN1DecodeItem(arena, &signedData,
SEC_ASN1_GET(CERT_SignedDataTemplate), &reqDER);
if (rv) {
break;
}
rv = SEC_ASN1DecodeItem(arena, certReq,
SEC_ASN1_GET(CERT_CertificateRequestTemplate), &signedData.data);
if (rv) {
break;
}
rv = CERT_VerifySignedDataWithPublicKeyInfo(&signedData,
&certReq->subjectPublicKeyInfo, NULL /* wincx */);
} while (0);
if (reqDER.data) {
SECITEM_FreeItem(&reqDER, PR_FALSE);
}
if (rv) {
SECU_PrintError(progName, "bad certificate request\n");
if (arena) {
PORT_FreeArena(arena, PR_FALSE);
}
certReq = NULL;
}
return certReq;
}
static SECStatus
AddCert(PK11SlotInfo *slot, CERTCertDBHandle *handle, char *name, char *trusts,
PRFileDesc *inFile, PRBool ascii, PRBool emailcert, void *pwdata)
{
CERTCertTrust *trust = NULL;
CERTCertificate *cert = NULL;
SECItem certDER;
SECStatus rv;
certDER.data = NULL;
do {
/* Read in the entire file specified with the -i argument */
rv = SECU_ReadDERFromFile(&certDER, inFile, ascii);
if (rv != SECSuccess) {
SECU_PrintError(progName, "unable to read input file");
break;
}
/* Read in an ASCII cert and return a CERTCertificate */
cert = CERT_DecodeCertFromPackage((char *)certDER.data, certDER.len);
if (!cert) {
SECU_PrintError(progName, "could not obtain certificate from file");
GEN_BREAK(SECFailure);
}
/* Create a cert trust */
trust = (CERTCertTrust *)PORT_ZAlloc(sizeof(CERTCertTrust));
if (!trust) {
SECU_PrintError(progName, "unable to allocate cert trust");
GEN_BREAK(SECFailure);
}
rv = CERT_DecodeTrustString(trust, trusts);
if (rv) {
SECU_PrintError(progName, "unable to decode trust string");
GEN_BREAK(SECFailure);
}
rv = PK11_ImportCert(slot, cert, CK_INVALID_HANDLE, name, PR_FALSE);
if (rv != SECSuccess) {
/* sigh, PK11_Import Cert and CERT_ChangeCertTrust should have
* been coded to take a password arg. */
if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) {
rv = PK11_Authenticate(slot, PR_TRUE, pwdata);
if (rv != SECSuccess) {
SECU_PrintError(progName,
"could not authenticate to token %s.",
PK11_GetTokenName(slot));
GEN_BREAK(SECFailure);
}
rv = PK11_ImportCert(slot, cert, CK_INVALID_HANDLE,
name, PR_FALSE);
}
if (rv != SECSuccess) {
SECU_PrintError(progName,
"could not add certificate to token or database");
GEN_BREAK(SECFailure);
}
}
rv = CERT_ChangeCertTrust(handle, cert, trust);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) {
rv = PK11_Authenticate(slot, PR_TRUE, pwdata);
if (rv != SECSuccess) {
SECU_PrintError(progName,
"could not authenticate to token %s.",
PK11_GetTokenName(slot));
GEN_BREAK(SECFailure);
}
rv = CERT_ChangeCertTrust(handle, cert, trust);
}
if (rv != SECSuccess) {
SECU_PrintError(progName,
"could not change trust on certificate");
GEN_BREAK(SECFailure);
}
}
if ( emailcert ) {
CERT_SaveSMimeProfile(cert, NULL, pwdata);
}
} while (0);
CERT_DestroyCertificate (cert);
PORT_Free(trust);
PORT_Free(certDER.data);
return rv;
}
static SECStatus
CertReq(SECKEYPrivateKey *privk, SECKEYPublicKey *pubk, KeyType keyType,
SECOidTag hashAlgTag, CERTName *subject, char *phone, int ascii,
const char *emailAddrs, const char *dnsNames,
certutilExtnList extnList,
PRFileDesc *outFile)
{
CERTSubjectPublicKeyInfo *spki;
CERTCertificateRequest *cr;
SECItem *encoding;
SECOidTag signAlgTag;
SECItem result;
SECStatus rv;
PRArenaPool *arena;
PRInt32 numBytes;
void *extHandle;
/* Create info about public key */
spki = SECKEY_CreateSubjectPublicKeyInfo(pubk);
if (!spki) {
SECU_PrintError(progName, "unable to create subject public key");
return SECFailure;
}
/* Generate certificate request */
cr = CERT_CreateCertificateRequest(subject, spki, NULL);
if (!cr) {
SECU_PrintError(progName, "unable to make certificate request");
return SECFailure;
}
arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if ( !arena ) {
SECU_PrintError(progName, "out of memory");
return SECFailure;
}
extHandle = CERT_StartCertificateRequestAttributes(cr);
if (extHandle == NULL) {
PORT_FreeArena (arena, PR_FALSE);
return SECFailure;
}
if (AddExtensions(extHandle, emailAddrs, dnsNames, extnList)
!= SECSuccess) {
PORT_FreeArena (arena, PR_FALSE);
return SECFailure;
}
CERT_FinishExtensions(extHandle);
CERT_FinishCertificateRequestAttributes(cr);
/* Der encode the request */
encoding = SEC_ASN1EncodeItem(arena, NULL, cr,
SEC_ASN1_GET(CERT_CertificateRequestTemplate));
if (encoding == NULL) {
SECU_PrintError(progName, "der encoding of request failed");
return SECFailure;
}
/* Sign the request */
signAlgTag = SEC_GetSignatureAlgorithmOidTag(keyType, hashAlgTag);
if (signAlgTag == SEC_OID_UNKNOWN) {
SECU_PrintError(progName, "unknown Key or Hash type");
return SECFailure;
}
rv = SEC_DerSignData(arena, &result, encoding->data, encoding->len,
privk, signAlgTag);
if (rv) {
SECU_PrintError(progName, "signing of data failed");
return SECFailure;
}
/* Encode request in specified format */
if (ascii) {
char *obuf;
char *name, *email, *org, *state, *country;
SECItem *it;
int total;
it = &result;
obuf = BTOA_ConvertItemToAscii(it);
total = PL_strlen(obuf);
name = CERT_GetCommonName(subject);
if (!name) {
name = strdup("(not specified)");
}
if (!phone)
phone = strdup("(not specified)");
email = CERT_GetCertEmailAddress(subject);
if (!email)
email = strdup("(not specified)");
org = CERT_GetOrgName(subject);
if (!org)
org = strdup("(not specified)");
state = CERT_GetStateName(subject);
if (!state)
state = strdup("(not specified)");
country = CERT_GetCountryName(subject);
if (!country)
country = strdup("(not specified)");
PR_fprintf(outFile,
"\nCertificate request generated by Netscape certutil\n");
PR_fprintf(outFile, "Phone: %s\n\n", phone);
PR_fprintf(outFile, "Common Name: %s\n", name);
PR_fprintf(outFile, "Email: %s\n", email);
PR_fprintf(outFile, "Organization: %s\n", org);
PR_fprintf(outFile, "State: %s\n", state);
PR_fprintf(outFile, "Country: %s\n\n", country);
PR_fprintf(outFile, "%s\n", NS_CERTREQ_HEADER);
numBytes = PR_Write(outFile, obuf, total);
if (numBytes != total) {
SECU_PrintSystemError(progName, "write error");
return SECFailure;
}
PR_fprintf(outFile, "\n%s\n", NS_CERTREQ_TRAILER);
} else {
numBytes = PR_Write(outFile, result.data, result.len);
if (numBytes != (int)result.len) {
SECU_PrintSystemError(progName, "write error");
return SECFailure;
}
}
return SECSuccess;
}
static SECStatus
ChangeTrustAttributes(CERTCertDBHandle *handle, PK11SlotInfo *slot,
char *name, char *trusts, void *pwdata)
{
SECStatus rv;
CERTCertificate *cert;
CERTCertTrust *trust;
cert = CERT_FindCertByNicknameOrEmailAddr(handle, name);
if (!cert) {
SECU_PrintError(progName, "could not find certificate named \"%s\"",
name);
return SECFailure;
}
trust = (CERTCertTrust *)PORT_ZAlloc(sizeof(CERTCertTrust));
if (!trust) {
SECU_PrintError(progName, "unable to allocate cert trust");
return SECFailure;
}
/* This function only decodes these characters: pPwcTCu, */
rv = CERT_DecodeTrustString(trust, trusts);
if (rv) {
SECU_PrintError(progName, "unable to decode trust string");
return SECFailure;
}
/* CERT_ChangeCertTrust API does not have a way to pass in
* a context, so NSS can't prompt for the password if it needs to.
* check to see if the failure was token not logged in and
* log in if need be. */
rv = CERT_ChangeCertTrust(handle, cert, trust);
if (rv != SECSuccess) {
if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) {
rv = PK11_Authenticate(slot, PR_TRUE, pwdata);
if (rv != SECSuccess) {
SECU_PrintError(progName, "could not authenticate to token %s.",
PK11_GetTokenName(slot));
return SECFailure;
}
rv = CERT_ChangeCertTrust(handle, cert, trust);
}
if (rv != SECSuccess) {
SECU_PrintError(progName, "unable to modify trust attributes");
return SECFailure;
}
}
CERT_DestroyCertificate(cert);
return SECSuccess;
}
static SECStatus
DumpChain(CERTCertDBHandle *handle, char *name)
{
CERTCertificate *the_cert;
CERTCertificateList *chain;
int i, j;
the_cert = PK11_FindCertFromNickname(name, NULL);
if (!the_cert) {
SECU_PrintError(progName, "Could not find: %s\n", name);
return SECFailure;
}
chain = CERT_CertChainFromCert(the_cert, 0, PR_TRUE);
CERT_DestroyCertificate(the_cert);
if (!chain) {
SECU_PrintError(progName, "Could not obtain chain for: %s\n", name);
return SECFailure;
}
for (i=chain->len-1; i>=0; i--) {
CERTCertificate *c;
c = CERT_FindCertByDERCert(handle, &chain->certs[i]);
for (j=i; j<chain->len-1; j++) printf(" ");
printf("\"%s\" [%s]\n\n", c->nickname, c->subjectName);
CERT_DestroyCertificate(c);
}
CERT_DestroyCertificateList(chain);
return SECSuccess;
}
static SECStatus
listCerts(CERTCertDBHandle *handle, char *name, PK11SlotInfo *slot,
PRBool raw, PRBool ascii, PRFileDesc *outfile, void *pwarg)
{
SECItem data;
PRInt32 numBytes;
SECStatus rv = SECFailure;
CERTCertList *certs;
CERTCertListNode *node;
/* List certs on a non-internal slot. */
if (!PK11_IsFriendly(slot) && PK11_NeedLogin(slot)) {
SECStatus newrv = PK11_Authenticate(slot, PR_TRUE, pwarg);
if (newrv != SECSuccess) {
SECU_PrintError(progName, "could not authenticate to token %s.",
PK11_GetTokenName(slot));
return SECFailure;
}
}
if (name) {
CERTCertificate *the_cert;
the_cert = CERT_FindCertByNicknameOrEmailAddr(handle, name);
if (!the_cert) {
the_cert = PK11_FindCertFromNickname(name, NULL);
if (!the_cert) {
SECU_PrintError(progName, "Could not find: %s\n", name);
return SECFailure;
}
}
/* Here, we have one cert with the desired nickname or email
* address. Now, we will attempt to get a list of ALL certs
* with the same subject name as the cert we have. That list
* should contain, at a minimum, the one cert we have already found.
* If the list of certs is empty (NULL), the libraries have failed.
*/
certs = CERT_CreateSubjectCertList(NULL, handle, &the_cert->derSubject,
PR_Now(), PR_FALSE);
CERT_DestroyCertificate(the_cert);
if (!certs) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
SECU_PrintError(progName, "problem printing certificates");
return SECFailure;
}
for (node = CERT_LIST_HEAD(certs); !CERT_LIST_END(node,certs);
node = CERT_LIST_NEXT(node)) {
the_cert = node->cert;
/* now get the subjectList that matches this cert */
data.data = the_cert->derCert.data;
data.len = the_cert->derCert.len;
if (ascii) {
PR_fprintf(outfile, "%s\n%s\n%s\n", NS_CERT_HEADER,
BTOA_DataToAscii(data.data, data.len), NS_CERT_TRAILER);
rv = SECSuccess;
} else if (raw) {
numBytes = PR_Write(outfile, data.data, data.len);
if (numBytes != (PRInt32) data.len) {
SECU_PrintSystemError(progName, "error writing raw cert");
rv = SECFailure;
}
rv = SECSuccess;
} else {
rv = SEC_PrintCertificateAndTrust(the_cert, "Certificate",
the_cert->trust);
if (rv != SECSuccess) {
SECU_PrintError(progName, "problem printing certificate");
}
}
if (rv != SECSuccess) {
break;
}
}
} else {
certs = PK11_ListCertsInSlot(slot);
if (certs) {
for (node = CERT_LIST_HEAD(certs); !CERT_LIST_END(node,certs);
node = CERT_LIST_NEXT(node)) {
SECU_PrintCertNickname(node,stdout);
}
rv = SECSuccess;
}
}
if (certs) {
CERT_DestroyCertList(certs);
}
if (rv) {
SECU_PrintError(progName, "problem printing certificate nicknames");
return SECFailure;
}
return SECSuccess; /* not rv ?? */
}
static SECStatus
ListCerts(CERTCertDBHandle *handle, char *nickname, PK11SlotInfo *slot,
PRBool raw, PRBool ascii, PRFileDesc *outfile, secuPWData *pwdata)
{
SECStatus rv;
if (!ascii && !raw && !nickname) {
PR_fprintf(outfile, "\n%-60s %-5s\n%-60s %-5s\n\n",
"Certificate Nickname", "Trust Attributes", "",
"SSL,S/MIME,JAR/XPI");
}
if (slot == NULL) {
CERTCertList *list;
CERTCertListNode *node;
list = PK11_ListCerts(PK11CertListAll, pwdata);
for (node = CERT_LIST_HEAD(list); !CERT_LIST_END(node, list);
node = CERT_LIST_NEXT(node))
{
SECU_PrintCertNickname(node, stdout);
}
CERT_DestroyCertList(list);
return SECSuccess;
} else {
rv = listCerts(handle,nickname,slot,raw,ascii,outfile,pwdata);
}
return rv;
}
static SECStatus
DeleteCert(CERTCertDBHandle *handle, char *name)
{
SECStatus rv;
CERTCertificate *cert;
cert = CERT_FindCertByNicknameOrEmailAddr(handle, name);
if (!cert) {
SECU_PrintError(progName, "could not find certificate named \"%s\"",
name);
return SECFailure;
}
rv = SEC_DeletePermCertificate(cert);
CERT_DestroyCertificate(cert);
if (rv) {
SECU_PrintError(progName, "unable to delete certificate");
return SECFailure;
}
return SECSuccess;
}
static SECStatus
ValidateCert(CERTCertDBHandle *handle, char *name, char *date,
char *certUsage, PRBool checkSig, PRBool logit, secuPWData *pwdata)
{
SECStatus rv;
CERTCertificate *cert = NULL;
int64 timeBoundary;
SECCertificateUsage usage;
CERTVerifyLog reallog;
CERTVerifyLog *log = NULL;
if (!certUsage) {
PORT_SetError (SEC_ERROR_INVALID_ARGS);
return (SECFailure);
}
switch (*certUsage) {
case 'O':
usage = certificateUsageStatusResponder;
break;
case 'C':
usage = certificateUsageSSLClient;
break;
case 'V':
usage = certificateUsageSSLServer;
break;
case 'S':
usage = certificateUsageEmailSigner;
break;
case 'R':
usage = certificateUsageEmailRecipient;
break;
case 'J':
usage = certificateUsageObjectSigner;
break;
default:
PORT_SetError (SEC_ERROR_INVALID_ARGS);
return (SECFailure);
}
do {
cert = CERT_FindCertByNicknameOrEmailAddr(handle, name);
if (!cert) {
SECU_PrintError(progName, "could not find certificate named \"%s\"",
name);
GEN_BREAK (SECFailure)
}
if (date != NULL) {
rv = DER_AsciiToTime(&timeBoundary, date);
if (rv) {
SECU_PrintError(progName, "invalid input date");
GEN_BREAK (SECFailure)
}
} else {
timeBoundary = PR_Now();
}
if ( logit ) {
log = &reallog;
log->count = 0;
log->head = NULL;
log->tail = NULL;
log->arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE);
if ( log->arena == NULL ) {
SECU_PrintError(progName, "out of memory");
GEN_BREAK (SECFailure)
}
}
rv = CERT_VerifyCertificate(handle, cert, checkSig, usage,
timeBoundary, pwdata, log, &usage);
if ( log ) {
if ( log->head == NULL ) {
fprintf(stdout, "%s: certificate is valid\n", progName);
GEN_BREAK (SECSuccess)
} else {
char *name;
CERTVerifyLogNode *node;
node = log->head;
while ( node ) {
if ( node->cert->nickname != NULL ) {
name = node->cert->nickname;
} else {
name = node->cert->subjectName;
}
fprintf(stderr, "%s : %s\n", name,
SECU_Strerror(node->error));
CERT_DestroyCertificate(node->cert);
node = node->next;
}
}
} else {
if (rv != SECSuccess) {
PRErrorCode perr = PORT_GetError();
fprintf(stdout, "%s: certificate is invalid: %s\n",
progName, SECU_Strerror(perr));
GEN_BREAK (SECFailure)
}
fprintf(stdout, "%s: certificate is valid\n", progName);
GEN_BREAK (SECSuccess)
}
} while (0);
if (cert) {
CERT_DestroyCertificate(cert);
}
return (rv);
}
static PRBool
ItemIsPrintableASCII(const SECItem * item)
{
unsigned char *src = item->data;
unsigned int len = item->len;
while (len-- > 0) {
unsigned char uc = *src++;
if (uc < 0x20 || uc > 0x7e)
return PR_FALSE;
}
return PR_TRUE;
}
/* Caller ensures that dst is at least item->len*2+1 bytes long */
static void
SECItemToHex(const SECItem * item, char * dst)
{
if (dst && item && item->data) {
unsigned char * src = item->data;
unsigned int len = item->len;
for (; len > 0; --len, dst += 2) {
sprintf(dst, "%02x", *src++);
}
*dst = '\0';
}
}
static const char * const keyTypeName[] = {
"null", "rsa", "dsa", "fortezza", "dh", "kea", "ec" };
#define MAX_CKA_ID_BIN_LEN 20
#define MAX_CKA_ID_STR_LEN 40
/* print key number, key ID (in hex or ASCII), key label (nickname) */
static SECStatus
PrintKey(PRFileDesc *out, const char *nickName, int count,
SECKEYPrivateKey *key, void *pwarg)
{
SECItem * ckaID;
char ckaIDbuf[MAX_CKA_ID_STR_LEN + 4];
pwarg = NULL;
ckaID = PK11_GetLowLevelKeyIDForPrivateKey(key);
if (!ckaID) {
strcpy(ckaIDbuf, "(no CKA_ID)");
} else if (ItemIsPrintableASCII(ckaID)) {
int len = PR_MIN(MAX_CKA_ID_STR_LEN, ckaID->len);
ckaIDbuf[0] = '"';
memcpy(ckaIDbuf + 1, ckaID->data, len);
ckaIDbuf[1 + len] = '"';
ckaIDbuf[2 + len] = '\0';
} else {
/* print ckaid in hex */
SECItem idItem = *ckaID;
if (idItem.len > MAX_CKA_ID_BIN_LEN)
idItem.len = MAX_CKA_ID_BIN_LEN;
SECItemToHex(&idItem, ckaIDbuf);
}
PR_fprintf(out, "<%2d> %-8.8s %-42.42s %s\n", count,
keyTypeName[key->keyType], ckaIDbuf, nickName);
SECITEM_ZfreeItem(ckaID, PR_TRUE);
return SECSuccess;
}
/* returns SECSuccess if ANY keys are found, SECFailure otherwise. */
static SECStatus
ListKeysInSlot(PK11SlotInfo *slot, const char *nickName, KeyType keyType,
void *pwarg)
{
SECKEYPrivateKeyList *list;
SECKEYPrivateKeyListNode *node;
int count = 0;
if (PK11_NeedLogin(slot)) {
SECStatus rv = PK11_Authenticate(slot, PR_TRUE, pwarg);
if (rv != SECSuccess) {
SECU_PrintError(progName, "could not authenticate to token %s.",
PK11_GetTokenName(slot));
return SECFailure;
}
}
if (nickName && nickName[0])
list = PK11_ListPrivKeysInSlot(slot, (char *)nickName, pwarg);
else
list = PK11_ListPrivateKeysInSlot(slot);
if (list == NULL) {
SECU_PrintError(progName, "problem listing keys");
return SECFailure;
}
for (node=PRIVKEY_LIST_HEAD(list);
!PRIVKEY_LIST_END(node,list);
node=PRIVKEY_LIST_NEXT(node)) {
char * keyName;
static const char orphan[] = { "(orphan)" };
if (keyType != nullKey && keyType != node->key->keyType)
continue;
keyName = PK11_GetPrivateKeyNickname(node->key);
if (!keyName || !keyName[0]) {
/* Try extra hard to find nicknames for keys that lack them. */
CERTCertificate * cert;
PORT_Free((void *)keyName);
keyName = NULL;
cert = PK11_GetCertFromPrivateKey(node->key);
if (cert) {
if (cert->nickname && cert->nickname[0]) {
keyName = PORT_Strdup(cert->nickname);
} else if (cert->emailAddr && cert->emailAddr[0]) {
keyName = PORT_Strdup(cert->emailAddr);
}
CERT_DestroyCertificate(cert);
}
}
if (nickName) {
if (!keyName || PL_strcmp(keyName,nickName)) {
/* PKCS#11 module returned unwanted keys */
PORT_Free((void *)keyName);
continue;
}
}
if (!keyName)
keyName = (char *)orphan;
PrintKey(PR_STDOUT, keyName, count, node->key, pwarg);
if (keyName != (char *)orphan)
PORT_Free((void *)keyName);
count++;
}
SECKEY_DestroyPrivateKeyList(list);
if (count == 0) {
PR_fprintf(PR_STDOUT, "%s: no keys found\n", progName);
return SECFailure;
}
return SECSuccess;
}
/* returns SECSuccess if ANY keys are found, SECFailure otherwise. */
static SECStatus
ListKeys(PK11SlotInfo *slot, const char *nickName, int index,
KeyType keyType, PRBool dopriv, secuPWData *pwdata)
{
SECStatus rv = SECFailure;
static const char fmt[] = \
"%s: Checking token \"%.33s\" in slot \"%.65s\"\n";
if (slot == NULL) {
PK11SlotList *list;
PK11SlotListElement *le;
list= PK11_GetAllTokens(CKM_INVALID_MECHANISM,PR_FALSE,PR_FALSE,pwdata);
if (list) {
for (le = list->head; le; le = le->next) {
PR_fprintf(PR_STDOUT, fmt, progName,
PK11_GetTokenName(le->slot),
PK11_GetSlotName(le->slot));
rv &= ListKeysInSlot(le->slot,nickName,keyType,pwdata);
}
PK11_FreeSlotList(list);
}
} else {
PR_fprintf(PR_STDOUT, fmt, progName, PK11_GetTokenName(slot),
PK11_GetSlotName(slot));
rv = ListKeysInSlot(slot,nickName,keyType,pwdata);
}
return rv;
}
static SECStatus
DeleteKey(char *nickname, secuPWData *pwdata)
{
SECStatus rv;
CERTCertificate *cert;
PK11SlotInfo *slot;
slot = PK11_GetInternalKeySlot();
if (PK11_NeedLogin(slot)) {
SECStatus rv = PK11_Authenticate(slot, PR_TRUE, pwdata);
if (rv != SECSuccess) {
SECU_PrintError(progName, "could not authenticate to token %s.",
PK11_GetTokenName(slot));
return SECFailure;
}
}
cert = PK11_FindCertFromNickname(nickname, pwdata);
if (!cert) {
PK11_FreeSlot(slot);
return SECFailure;
}
rv = PK11_DeleteTokenCertAndKey(cert, pwdata);
if (rv != SECSuccess) {
SECU_PrintError("problem deleting private key \"%s\"\n", nickname);
}
CERT_DestroyCertificate(cert);
PK11_FreeSlot(slot);
return rv;
}
/*
* L i s t M o d u l e s
*
* Print a list of the PKCS11 modules that are
* available. This is useful for smartcard people to
* make sure they have the drivers loaded.
*
*/
static SECStatus
ListModules(void)
{
PK11SlotList *list;
PK11SlotListElement *le;
/* get them all! */
list = PK11_GetAllTokens(CKM_INVALID_MECHANISM,PR_FALSE,PR_FALSE,NULL);
if (list == NULL) return SECFailure;
/* look at each slot*/
for (le = list->head ; le; le = le->next) {
printf ("\n");
printf (" slot: %s\n", PK11_GetSlotName(le->slot));
printf (" token: %s\n", PK11_GetTokenName(le->slot));
}
PK11_FreeSlotList(list);
return SECSuccess;
}
static void
Usage(char *progName)
{
#define FPS fprintf(stderr,
FPS "Type %s -H for more detailed descriptions\n", progName);
FPS "Usage: %s -N [-d certdir] [-P dbprefix] [-f pwfile]\n", progName);
FPS "Usage: %s -T [-d certdir] [-P dbprefix] [-h token-name]\n"
"\t\t [-f pwfile] [-0 SSO-password]\n", progName);
FPS "\t%s -A -n cert-name -t trustargs [-d certdir] [-P dbprefix] [-a] [-i input]\n",
progName);
FPS "\t%s -B -i batch-file\n", progName);
FPS "\t%s -C [-c issuer-name | -x] -i cert-request-file -o cert-file\n"
"\t\t [-m serial-number] [-w warp-months] [-v months-valid]\n"
"\t\t [-f pwfile] [-d certdir] [-P dbprefix]\n"
"\t\t [-1 | --keyUsage [keyUsageKeyword,..]] [-2] [-3] [-4]\n"
"\t\t [-5 | --nsCertType [nsCertTypeKeyword,...]]\n"
"\t\t [-6 | --extKeyUsage [extKeyUsageKeyword,...]] [-7 emailAddrs]\n"
"\t\t [-8 dns-names] [-a]\n",
progName);
FPS "\t%s -D -n cert-name [-d certdir] [-P dbprefix]\n", progName);
FPS "\t%s -E -n cert-name -t trustargs [-d certdir] [-P dbprefix] [-a] [-i input]\n",
progName);
FPS "\t%s -G -n key-name [-h token-name] [-k rsa] [-g key-size] [-y exp]\n"
"\t\t [-f pwfile] [-z noisefile] [-d certdir] [-P dbprefix]\n", progName);
FPS "\t%s -G [-h token-name] -k dsa [-q pqgfile -g key-size] [-f pwfile]\n"
"\t\t [-z noisefile] [-d certdir] [-P dbprefix]\n", progName);
#ifdef NSS_ENABLE_ECC
FPS "\t%s -G [-h token-name] -k ec -q curve [-f pwfile]\n"
"\t\t [-z noisefile] [-d certdir] [-P dbprefix]\n", progName);
FPS "\t%s -K [-n key-name] [-h token-name] [-k dsa|ec|rsa|all]\n",
progName);
#else
FPS "\t%s -K [-n key-name] [-h token-name] [-k dsa|rsa|all]\n",
progName);
#endif /* NSS_ENABLE_ECC */
FPS "\t\t [-f pwfile] [-X] [-d certdir] [-P dbprefix]\n");
FPS "\t%s --upgrade-merge --source-dir upgradeDir --upgrade-id uniqueID\n",
progName);
FPS "\t\t [--upgrade-token-name tokenName] [-d targetDBDir]\n");
FPS "\t\t [-P targetDBPrefix] [--source-prefix upgradeDBPrefix]\n");
FPS "\t\t [-f targetPWfile] [-@ upgradePWFile]\n");
FPS "\t%s --merge --source-dir sourceDBDir [-d targetDBdir]\n",
progName);
FPS "\t\t [-P targetDBPrefix] [--source-prefix sourceDBPrefix]\n");
FPS "\t\t [-f targetPWfile] [-@ sourcePWFile]\n");
FPS "\t%s -L [-n cert-name] [-X] [-d certdir] [-P dbprefix] [-r] [-a]\n", progName);
FPS "\t%s -M -n cert-name -t trustargs [-d certdir] [-P dbprefix]\n",
progName);
FPS "\t%s -O -n cert-name [-X] [-d certdir] [-P dbprefix]\n", progName);
FPS "\t%s -R -s subj -o cert-request-file [-d certdir] [-P dbprefix] [-p phone] [-a]\n"
"\t\t [-7 emailAddrs] [-k key-type-or-id] [-h token-name] [-f pwfile] [-g key-size]\n",
progName);
FPS "\t%s -V -n cert-name -u usage [-b time] [-e] \n"
"\t\t[-X] [-d certdir] [-P dbprefix]\n",
progName);
FPS "\t%s -S -n cert-name -s subj [-c issuer-name | -x] -t trustargs\n"
"\t\t [-k key-type-or-id] [-q key-params] [-h token-name] [-g key-size]\n"
"\t\t [-m serial-number] [-w warp-months] [-v months-valid]\n"
"\t\t [-f pwfile] [-d certdir] [-P dbprefix]\n"
"\t\t [-p phone] [-1] [-2] [-3] [-4] [-5] [-6] [-7 emailAddrs]\n"
"\t\t [-8 DNS-names]\n"
"\t\t [--extAIA] [--extSIA] [--extCP] [--extPM] [--extPC] [--extIA]\n"
"\t\t [--extSKID]\n", progName);
FPS "\t%s -U [-X] [-d certdir] [-P dbprefix]\n", progName);
exit(1);
}
static void LongUsage(char *progName)
{
FPS "%-15s Add a certificate to the database (create if needed)\n",
"-A");
FPS "%-20s\n", " All options under -E apply");
FPS "%-15s Run a series of certutil commands from a batch file\n", "-B");
FPS "%-20s Specify the batch file\n", " -i batch-file");
FPS "%-15s Add an Email certificate to the database (create if needed)\n",
"-E");
FPS "%-20s Specify the nickname of the certificate to add\n",
" -n cert-name");
FPS "%-20s Set the certificate trust attributes:\n",
" -t trustargs");
FPS "%-25s trustargs is of the form x,y,z where x is for SSL, y is for S/MIME,\n", "");
FPS "%-25s and z is for code signing\n", "");
FPS "%-25s p \t valid peer\n", "");
FPS "%-25s P \t trusted peer (implies p)\n", "");
FPS "%-25s c \t valid CA\n", "");
FPS "%-25s T \t trusted CA to issue client certs (implies c)\n", "");
FPS "%-25s C \t trusted CA to issue server certs (implies c)\n", "");
FPS "%-25s u \t user cert\n", "");
FPS "%-25s w \t send warning\n", "");
FPS "%-25s g \t make step-up cert\n", "");
FPS "%-20s Specify the password file\n",
" -f pwfile");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s The input certificate is encoded in ASCII (RFC1113)\n",
" -a");
FPS "%-20s Specify the certificate file (default is stdin)\n",
" -i input");
FPS "\n");
FPS "%-15s Create a new binary certificate from a BINARY cert request\n",
"-C");
FPS "%-20s The nickname of the issuer cert\n",
" -c issuer-name");
FPS "%-20s The BINARY certificate request file\n",
" -i cert-request ");
FPS "%-20s Output binary cert to this file (default is stdout)\n",
" -o output-cert");
FPS "%-20s Self sign\n",
" -x");
FPS "%-20s Cert serial number\n",
" -m serial-number");
FPS "%-20s Time Warp\n",
" -w warp-months");
FPS "%-20s Months valid (default is 3)\n",
" -v months-valid");
FPS "%-20s Specify the password file\n",
" -f pwfile");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s \n"
"%-20s Create key usage extension. Possible keywords:\n"
"%-20s \"digitalSignature\", \"nonRepudiation\", \"keyEncipherment\",\n"
"%-20s \"dataEncipherment\", \"keyAgreement\", \"certSigning\",\n"
"%-20s \"crlSigning\", \"critical\"\n",
" -1 | --keyUsage keyword,keyword,...", "", "", "", "");
FPS "%-20s Create basic constraint extension\n",
" -2 ");
FPS "%-20s Create authority key ID extension\n",
" -3 ");
FPS "%-20s Create crl distribution point extension\n",
" -4 ");
FPS "%-20s \n"
"%-20s Create netscape cert type extension. Possible keywords:\n"
"%-20s \"sslClient\", \"sslServer\", \"smime\", \"objectSigning\",\n"
"%-20s \"sslCA\", \"smimeCA\", \"objectSigningCA\", \"critical\".\n",
" -5 | -nsCertType keyword,keyword,... ", "", "", "");
FPS "%-20s \n"
"%-20s Create extended key usage extension. Possible keywords:\n"
"%-20s \"serverAuth\", \"clientAuth\",\"codeSigning\",\n"
"%-20s \"emailProtection\", \"timeStamp\",\"ocspResponder\",\n"
"%-20s \"stepUp\", \"critical\"\n",
" -6 | --extKeyUsage keyword,keyword,...", "", "", "", "");
FPS "%-20s Create an email subject alt name extension\n",
" -7 emailAddrs");
FPS "%-20s Create an dns subject alt name extension\n",
" -8 dnsNames");
FPS "%-20s The input certificate request is encoded in ASCII (RFC1113)\n",
" -a");
FPS "\n");
FPS "%-15s Generate a new key pair\n",
"-G");
FPS "%-20s Name of token in which to generate key (default is internal)\n",
" -h token-name");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n",
" -k key-type");
FPS "%-20s Key size in bits, (min %d, max %d, default %d) (not for ec)\n",
" -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS);
#else
FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n",
" -k key-type");
FPS "%-20s Key size in bits, (min %d, max %d, default %d)\n",
" -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS);
#endif /* NSS_ENABLE_ECC */
FPS "%-20s Set the public exponent value (3, 17, 65537) (rsa only)\n",
" -y exp");
FPS "%-20s Specify the password file\n",
" -f password-file");
FPS "%-20s Specify the noise file to be used\n",
" -z noisefile");
FPS "%-20s read PQG value from pqgfile (dsa only)\n",
" -q pqgfile");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Elliptic curve name (ec only)\n",
" -q curve-name");
FPS "%-20s One of nistp256, nistp384, nistp521\n", "");
#ifdef NSS_ECC_MORE_THAN_SUITE_B
FPS "%-20s sect163k1, nistk163, sect163r1, sect163r2,\n", "");
FPS "%-20s nistb163, sect193r1, sect193r2, sect233k1, nistk233,\n", "");
FPS "%-20s sect233r1, nistb233, sect239k1, sect283k1, nistk283,\n", "");
FPS "%-20s sect283r1, nistb283, sect409k1, nistk409, sect409r1,\n", "");
FPS "%-20s nistb409, sect571k1, nistk571, sect571r1, nistb571,\n", "");
FPS "%-20s secp160k1, secp160r1, secp160r2, secp192k1, secp192r1,\n", "");
FPS "%-20s nistp192, secp224k1, secp224r1, nistp224, secp256k1,\n", "");
FPS "%-20s secp256r1, secp384r1, secp521r1,\n", "");
FPS "%-20s prime192v1, prime192v2, prime192v3, \n", "");
FPS "%-20s prime239v1, prime239v2, prime239v3, c2pnb163v1, \n", "");
FPS "%-20s c2pnb163v2, c2pnb163v3, c2pnb176v1, c2tnb191v1, \n", "");
FPS "%-20s c2tnb191v2, c2tnb191v3, \n", "");
FPS "%-20s c2pnb208w1, c2tnb239v1, c2tnb239v2, c2tnb239v3, \n", "");
FPS "%-20s c2pnb272w1, c2pnb304w1, \n", "");
FPS "%-20s c2tnb359w1, c2pnb368w1, c2tnb431r1, secp112r1, \n", "");
FPS "%-20s secp112r2, secp128r1, secp128r2, sect113r1, sect113r2\n", "");
FPS "%-20s sect131r1, sect131r2\n", "");
#endif /* NSS_ECC_MORE_THAN_SUITE_B */
#endif
FPS "%-20s Key database directory (default is ~/.netscape)\n",
" -d keydir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "\n");
FPS "%-15s Delete a certificate from the database\n",
"-D");
FPS "%-20s The nickname of the cert to delete\n",
" -n cert-name");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "\n");
FPS "%-15s List all modules\n", /*, or print out a single named module\n",*/
"-U");
FPS "%-20s Module database directory (default is '~/.netscape')\n",
" -d moddir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s force the database to open R/W\n",
" -X");
FPS "\n");
FPS "%-15s List all private keys\n",
"-K");
FPS "%-20s Name of token to search (\"all\" for all tokens)\n",
" -h token-name ");
FPS "%-20s Key type (\"all\" (default), \"dsa\","
#ifdef NSS_ENABLE_ECC
" \"ec\","
#endif
" \"rsa\")\n",
" -k key-type");
FPS "%-20s The nickname of the key or associated certificate\n",
" -n name");
FPS "%-20s Specify the password file\n",
" -f password-file");
FPS "%-20s Key database directory (default is ~/.netscape)\n",
" -d keydir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s force the database to open R/W\n",
" -X");
FPS "\n");
FPS "%-15s List all certs, or print out a single named cert\n",
"-L");
FPS "%-20s Pretty print named cert (list all if unspecified)\n",
" -n cert-name");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s force the database to open R/W\n",
" -X");
FPS "%-20s For single cert, print binary DER encoding\n",
" -r");
FPS "%-20s For single cert, print ASCII encoding (RFC1113)\n",
" -a");
FPS "\n");
FPS "%-15s Modify trust attributes of certificate\n",
"-M");
FPS "%-20s The nickname of the cert to modify\n",
" -n cert-name");
FPS "%-20s Set the certificate trust attributes (see -A above)\n",
" -t trustargs");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "\n");
FPS "%-15s Create a new certificate database\n",
"-N");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "\n");
FPS "%-15s Reset the Key database or token\n",
"-T");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s Token to reset (default is internal)\n",
" -h token-name");
FPS "%-20s Set token's Site Security Officer password\n",
" -0 SSO-password");
FPS "\n");
FPS "\n");
FPS "%-15s Print the chain of a certificate\n",
"-O");
FPS "%-20s The nickname of the cert to modify\n",
" -n cert-name");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s force the database to open R/W\n",
" -X");
FPS "\n");
FPS "%-15s Generate a certificate request (stdout)\n",
"-R");
FPS "%-20s Specify the subject name (using RFC1485)\n",
" -s subject");
FPS "%-20s Output the cert request to this file\n",
" -o output-req");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n",
#else
FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n",
#endif /* NSS_ENABLE_ECC */
" -k key-type-or-id");
FPS "%-20s or nickname of the cert key to use \n",
"");
FPS "%-20s Name of token in which to generate key (default is internal)\n",
" -h token-name");
FPS "%-20s Key size in bits, RSA keys only (min %d, max %d, default %d)\n",
" -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS);
FPS "%-20s Name of file containing PQG parameters (dsa only)\n",
" -q pqgfile");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Elliptic curve name (ec only)\n",
" -q curve-name");
FPS "%-20s See the \"-G\" option for a full list of supported names.\n",
"");
#endif /* NSS_ENABLE_ECC */
FPS "%-20s Specify the password file\n",
" -f pwfile");
FPS "%-20s Key database directory (default is ~/.netscape)\n",
" -d keydir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s Specify the contact phone number (\"123-456-7890\")\n",
" -p phone");
FPS "%-20s Output the cert request in ASCII (RFC1113); default is binary\n",
" -a");
FPS "%-20s \n",
" See -S for available extension options");
FPS "\n");
FPS "%-15s Validate a certificate\n",
"-V");
FPS "%-20s The nickname of the cert to Validate\n",
" -n cert-name");
FPS "%-20s validity time (\"YYMMDDHHMMSS[+HHMM|-HHMM|Z]\")\n",
" -b time");
FPS "%-20s Check certificate signature \n",
" -e ");
FPS "%-20s Specify certificate usage:\n", " -u certusage");
FPS "%-25s C \t SSL Client\n", "");
FPS "%-25s V \t SSL Server\n", "");
FPS "%-25s S \t Email signer\n", "");
FPS "%-25s R \t Email Recipient\n", "");
FPS "%-25s O \t OCSP status responder\n", "");
FPS "%-25s J \t Object signer\n", "");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s force the database to open R/W\n",
" -X");
FPS "\n");
FPS "%-15s Upgrade an old database and merge it into a new one\n",
"--upgrade-merge");
FPS "%-20s Cert database directory to merge into (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix of the target database\n",
" -P dbprefix");
FPS "%-20s Specify the password file for the target database\n",
" -f pwfile");
FPS "%-20s \n%-20s Cert database directory to upgrade from\n",
" --source-dir certdir", "");
FPS "%-20s \n%-20s Cert & Key database prefix of the upgrade database\n",
" --soruce-prefix dbprefix", "");
FPS "%-20s \n%-20s Unique identifier for the upgrade database\n",
" --upgrade-id uniqueID", "");
FPS "%-20s \n%-20s Name of the token while it is in upgrade state\n",
" --upgrade-token-name name", "");
FPS "%-20s Specify the password file for the upgrade database\n",
" -@ pwfile");
FPS "\n");
FPS "%-15s Merge source database into the target database\n",
"--merge");
FPS "%-20s Cert database directory of target (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix of the target database\n",
" -P dbprefix");
FPS "%-20s Specify the password file for the target database\n",
" -f pwfile");
FPS "%-20s \n%-20s Cert database directory of the source database\n",
" --source-dir certdir", "");
FPS "%-20s \n%-20s Cert & Key database prefix of the source database\n",
" --source-prefix dbprefix", "");
FPS "%-20s Specify the password file for the source database\n",
" -@ pwfile");
FPS "\n");
FPS "%-15s Make a certificate and add to database\n",
"-S");
FPS "%-20s Specify the nickname of the cert\n",
" -n key-name");
FPS "%-20s Specify the subject name (using RFC1485)\n",
" -s subject");
FPS "%-20s The nickname of the issuer cert\n",
" -c issuer-name");
FPS "%-20s Set the certificate trust attributes (see -A above)\n",
" -t trustargs");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n",
#else
FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n",
#endif /* NSS_ENABLE_ECC */
" -k key-type-or-id");
FPS "%-20s Name of token in which to generate key (default is internal)\n",
" -h token-name");
FPS "%-20s Key size in bits, RSA keys only (min %d, max %d, default %d)\n",
" -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS);
FPS "%-20s Name of file containing PQG parameters (dsa only)\n",
" -q pqgfile");
#ifdef NSS_ENABLE_ECC
FPS "%-20s Elliptic curve name (ec only)\n",
" -q curve-name");
FPS "%-20s See the \"-G\" option for a full list of supported names.\n",
"");
#endif /* NSS_ENABLE_ECC */
FPS "%-20s Self sign\n",
" -x");
FPS "%-20s Cert serial number\n",
" -m serial-number");
FPS "%-20s Time Warp\n",
" -w warp-months");
FPS "%-20s Months valid (default is 3)\n",
" -v months-valid");
FPS "%-20s Specify the password file\n",
" -f pwfile");
FPS "%-20s Cert database directory (default is ~/.netscape)\n",
" -d certdir");
FPS "%-20s Cert & Key database prefix\n",
" -P dbprefix");
FPS "%-20s Specify the contact phone number (\"123-456-7890\")\n",
" -p phone");
FPS "%-20s Create key usage extension\n",
" -1 ");
FPS "%-20s Create basic constraint extension\n",
" -2 ");
FPS "%-20s Create authority key ID extension\n",
" -3 ");
FPS "%-20s Create crl distribution point extension\n",
" -4 ");
FPS "%-20s Create netscape cert type extension\n",
" -5 ");
FPS "%-20s Create extended key usage extension\n",
" -6 ");
FPS "%-20s Create an email subject alt name extension\n",
" -7 emailAddrs ");
FPS "%-20s Create a DNS subject alt name extension\n",
" -8 DNS-names");
FPS "%-20s Create an Authority Information Access extension\n",
" --extAIA ");
FPS "%-20s Create a Subject Information Access extension\n",
" --extSIA ");
FPS "%-20s Create a Certificate Policies extension\n",
" --extCP ");
FPS "%-20s Create a Policy Mappings extension\n",
" --extPM ");
FPS "%-20s Create a Policy Constraints extension\n",
" --extPC ");
FPS "%-20s Create an Inhibit Any Policy extension\n",
" --extIA ");
FPS "%-20s Create a subject key ID extension\n",
" --extSKID ");
FPS "\n");
exit(1);
#undef FPS
}
static CERTCertificate *
MakeV1Cert( CERTCertDBHandle * handle,
CERTCertificateRequest *req,
char * issuerNickName,
PRBool selfsign,
unsigned int serialNumber,
int warpmonths,
int validityMonths)
{
CERTCertificate *issuerCert = NULL;
CERTValidity *validity;
CERTCertificate *cert = NULL;
PRExplodedTime printableTime;
PRTime now, after;
if ( !selfsign ) {
issuerCert = CERT_FindCertByNicknameOrEmailAddr(handle, issuerNickName);
if (!issuerCert) {
SECU_PrintError(progName, "could not find certificate named \"%s\"",
issuerNickName);
return NULL;
}
}
now = PR_Now();
PR_ExplodeTime (now, PR_GMTParameters, &printableTime);
if ( warpmonths ) {
printableTime.tm_month += warpmonths;
now = PR_ImplodeTime (&printableTime);
PR_ExplodeTime (now, PR_GMTParameters, &printableTime);
}
printableTime.tm_month += validityMonths;
after = PR_ImplodeTime (&printableTime);
/* note that the time is now in micro-second unit */
validity = CERT_CreateValidity (now, after);
if (validity) {
cert = CERT_CreateCertificate(serialNumber,
(selfsign ? &req->subject
: &issuerCert->subject),
validity, req);
CERT_DestroyValidity(validity);
}
if ( issuerCert ) {
CERT_DestroyCertificate (issuerCert);
}
return(cert);
}
static SECItem *
SignCert(CERTCertDBHandle *handle, CERTCertificate *cert, PRBool selfsign,
SECOidTag hashAlgTag,
SECKEYPrivateKey *privKey, char *issuerNickName, void *pwarg)
{
SECItem der;
SECItem *result = NULL;
SECKEYPrivateKey *caPrivateKey = NULL;
SECStatus rv;
PRArenaPool *arena;
SECOidTag algID;
void *dummy;
if( !selfsign ) {
CERTCertificate *issuer = PK11_FindCertFromNickname(issuerNickName, pwarg);
if( (CERTCertificate *)NULL == issuer ) {
SECU_PrintError(progName, "unable to find issuer with nickname %s",
issuerNickName);
return (SECItem *)NULL;
}
privKey = caPrivateKey = PK11_FindKeyByAnyCert(issuer, pwarg);
CERT_DestroyCertificate(issuer);
if (caPrivateKey == NULL) {
SECU_PrintError(progName, "unable to retrieve key %s", issuerNickName);
return NULL;
}
}
arena = cert->arena;
algID = SEC_GetSignatureAlgorithmOidTag(privKey->keyType, hashAlgTag);
if (algID == SEC_OID_UNKNOWN) {
fprintf(stderr, "Unknown key or hash type for issuer.");
goto done;
}
rv = SECOID_SetAlgorithmID(arena, &cert->signature, algID, 0);
if (rv != SECSuccess) {
fprintf(stderr, "Could not set signature algorithm id.");
goto done;
}
/* we only deal with cert v3 here */
*(cert->version.data) = 2;
cert->version.len = 1;
der.len = 0;
der.data = NULL;
dummy = SEC_ASN1EncodeItem (arena, &der, cert,
SEC_ASN1_GET(CERT_CertificateTemplate));
if (!dummy) {
fprintf (stderr, "Could not encode certificate.\n");
goto done;
}
result = (SECItem *) PORT_ArenaZAlloc (arena, sizeof (SECItem));
if (result == NULL) {
fprintf (stderr, "Could not allocate item for certificate data.\n");
goto done;
}
rv = SEC_DerSignData(arena, result, der.data, der.len, privKey, algID);
if (rv != SECSuccess) {
fprintf (stderr, "Could not sign encoded certificate data.\n");
/* result allocated out of the arena, it will be freed
* when the arena is freed */
result = NULL;
goto done;
}
cert->derCert = *result;
done:
if (caPrivateKey) {
SECKEY_DestroyPrivateKey(caPrivateKey);
}
return result;
}
static SECStatus
CreateCert(
CERTCertDBHandle *handle,
PK11SlotInfo *slot,
char * issuerNickName,
PRFileDesc *inFile,
PRFileDesc *outFile,
SECKEYPrivateKey **selfsignprivkey,
void *pwarg,
SECOidTag hashAlgTag,
unsigned int serialNumber,
int warpmonths,
int validityMonths,
const char *emailAddrs,
const char *dnsNames,
PRBool ascii,
PRBool selfsign,
certutilExtnList extnList)
{
void * extHandle;
SECItem * certDER;
CERTCertificate *subjectCert = NULL;
CERTCertificateRequest *certReq = NULL;
SECStatus rv = SECSuccess;
SECItem reqDER;
CERTCertExtension **CRexts;
reqDER.data = NULL;
do {
/* Create a certrequest object from the input cert request der */
certReq = GetCertRequest(inFile, ascii);
if (certReq == NULL) {
GEN_BREAK (SECFailure)
}
subjectCert = MakeV1Cert (handle, certReq, issuerNickName, selfsign,
serialNumber, warpmonths, validityMonths);
if (subjectCert == NULL) {
GEN_BREAK (SECFailure)
}
extHandle = CERT_StartCertExtensions (subjectCert);
if (extHandle == NULL) {
GEN_BREAK (SECFailure)
}
rv = AddExtensions(extHandle, emailAddrs, dnsNames, extnList);
if (rv != SECSuccess) {
GEN_BREAK (SECFailure)
}
if (certReq->attributes != NULL &&
certReq->attributes[0] != NULL &&
certReq->attributes[0]->attrType.data != NULL &&
certReq->attributes[0]->attrType.len > 0 &&
SECOID_FindOIDTag(&certReq->attributes[0]->attrType)
== SEC_OID_PKCS9_EXTENSION_REQUEST) {
rv = CERT_GetCertificateRequestExtensions(certReq, &CRexts);
if (rv != SECSuccess)
break;
rv = CERT_MergeExtensions(extHandle, CRexts);
if (rv != SECSuccess)
break;
}
CERT_FinishExtensions(extHandle);
/* self-signing a cert request, find the private key */
if (selfsign && *selfsignprivkey == NULL) {
*selfsignprivkey = PK11_FindKeyByDERCert(slot, subjectCert, pwarg);
if (!*selfsignprivkey) {
fprintf(stderr, "Failed to locate private key.\n");
rv = SECFailure;
break;
}
}
certDER = SignCert(handle, subjectCert, selfsign, hashAlgTag,
*selfsignprivkey, issuerNickName,pwarg);
if (certDER) {
if (ascii) {
PR_fprintf(outFile, "%s\n%s\n%s\n", NS_CERT_HEADER,
BTOA_DataToAscii(certDER->data, certDER->len),
NS_CERT_TRAILER);
} else {
PR_Write(outFile, certDER->data, certDER->len);
}
}
} while (0);
CERT_DestroyCertificateRequest (certReq);
CERT_DestroyCertificate (subjectCert);
if (rv != SECSuccess) {
PRErrorCode perr = PR_GetError();
fprintf(stderr, "%s: unable to create cert (%s)\n", progName,
SECU_Strerror(perr));
}
return (rv);
}
/*
* map a class to a user presentable string
*/
static const char *objClassArray[] = {
"Data",
"Certificate",
"Public Key",
"Private Key",
"Secret Key",
"Hardware Feature",
"Domain Parameters",
"Mechanism"
};
static const char *objNSSClassArray[] = {
"CKO_NSS",
"Crl",
"SMIME Record",
"Trust",
"Builtin Root List"
};
const char *
getObjectClass(CK_ULONG classType)
{
static char buf[sizeof(CK_ULONG)*2+3];
if (classType <= CKO_MECHANISM) {
return objClassArray[classType];
}
if (classType >= CKO_NSS && classType <= CKO_NSS_BUILTIN_ROOT_LIST) {
return objNSSClassArray[classType - CKO_NSS];
}
sprintf(buf, "0x%lx", classType);
return buf;
}
char *mkNickname(unsigned char *data, int len)
{
char *nick = PORT_Alloc(len+1);
if (!nick) {
return nick;
}
PORT_Memcpy(nick, data, len);
nick[len] = 0;
return nick;
}
/*
* dump a PK11_MergeTokens error log to the console
*/
void
DumpMergeLog(const char *progname, PK11MergeLog *log)
{
PK11MergeLogNode *node;
for (node = log->head; node; node = node->next) {
SECItem attrItem;
char *nickname = NULL;
const char *objectClass = NULL;
SECStatus rv;
attrItem.data = NULL;
rv = PK11_ReadRawAttribute(PK11_TypeGeneric, node->object,
CKA_LABEL, &attrItem);
if (rv == SECSuccess) {
nickname = mkNickname(attrItem.data, attrItem.len);
PORT_Free(attrItem.data);
}
attrItem.data = NULL;
rv = PK11_ReadRawAttribute(PK11_TypeGeneric, node->object,
CKA_CLASS, &attrItem);
if (rv == SECSuccess) {
if (attrItem.len == sizeof(CK_ULONG)) {
objectClass = getObjectClass(*(CK_ULONG *)attrItem.data);
}
PORT_Free(attrItem.data);
}
fprintf(stderr, "%s: Could not merge object %s (type %s): %s\n",
progName,
nickname ? nickname : "unnamed",
objectClass ? objectClass : "unknown",
SECU_Strerror(node->error));
if (nickname) {
PORT_Free(nickname);
}
}
}
/* Certutil commands */
enum {
cmd_AddCert = 0,
cmd_CreateNewCert,
cmd_DeleteCert,
cmd_AddEmailCert,
cmd_DeleteKey,
cmd_GenKeyPair,
cmd_PrintHelp,
cmd_ListKeys,
cmd_ListCerts,
cmd_ModifyCertTrust,
cmd_NewDBs,
cmd_DumpChain,
cmd_CertReq,
cmd_CreateAndAddCert,
cmd_TokenReset,
cmd_ListModules,
cmd_CheckCertValidity,
cmd_ChangePassword,
cmd_Version,
cmd_Batch,
cmd_Merge,
cmd_UpgradeMerge /* test only */
};
/* Certutil options */
enum certutilOpts {
opt_SSOPass = 0,
opt_AddKeyUsageExt,
opt_AddBasicConstraintExt,
opt_AddAuthorityKeyIDExt,
opt_AddCRLDistPtsExt,
opt_AddNSCertTypeExt,
opt_AddExtKeyUsageExt,
opt_ExtendedEmailAddrs,
opt_ExtendedDNSNames,
opt_ASCIIForIO,
opt_ValidityTime,
opt_IssuerName,
opt_CertDir,
opt_VerifySig,
opt_PasswordFile,
opt_KeySize,
opt_TokenName,
opt_InputFile,
opt_KeyIndex,
opt_KeyType,
opt_DetailedInfo,
opt_SerialNumber,
opt_Nickname,
opt_OutputFile,
opt_PhoneNumber,
opt_DBPrefix,
opt_PQGFile,
opt_BinaryDER,
opt_Subject,
opt_Trust,
opt_Usage,
opt_Validity,
opt_OffsetMonths,
opt_SelfSign,
opt_RW,
opt_Exponent,
opt_NoiseFile,
opt_Hash,
opt_NewPasswordFile,
opt_AddAuthInfoAccExt,
opt_AddSubjInfoAccExt,
opt_AddCertPoliciesExt,
opt_AddPolicyMapExt,
opt_AddPolicyConstrExt,
opt_AddInhibAnyExt,
opt_AddSubjectKeyIDExt,
opt_AddCmdKeyUsageExt,
opt_AddCmdNSCertTypeExt,
opt_AddCmdExtKeyUsageExt,
opt_SourceDir,
opt_SourcePrefix,
opt_UpgradeID,
opt_UpgradeTokenName
};
static const
secuCommandFlag commands_init[] =
{
{ /* cmd_AddCert */ 'A', PR_FALSE, 0, PR_FALSE },
{ /* cmd_CreateNewCert */ 'C', PR_FALSE, 0, PR_FALSE },
{ /* cmd_DeleteCert */ 'D', PR_FALSE, 0, PR_FALSE },
{ /* cmd_AddEmailCert */ 'E', PR_FALSE, 0, PR_FALSE },
{ /* cmd_DeleteKey */ 'F', PR_FALSE, 0, PR_FALSE },
{ /* cmd_GenKeyPair */ 'G', PR_FALSE, 0, PR_FALSE },
{ /* cmd_PrintHelp */ 'H', PR_FALSE, 0, PR_FALSE },
{ /* cmd_ListKeys */ 'K', PR_FALSE, 0, PR_FALSE },
{ /* cmd_ListCerts */ 'L', PR_FALSE, 0, PR_FALSE },
{ /* cmd_ModifyCertTrust */ 'M', PR_FALSE, 0, PR_FALSE },
{ /* cmd_NewDBs */ 'N', PR_FALSE, 0, PR_FALSE },
{ /* cmd_DumpChain */ 'O', PR_FALSE, 0, PR_FALSE },
{ /* cmd_CertReq */ 'R', PR_FALSE, 0, PR_FALSE },
{ /* cmd_CreateAndAddCert */ 'S', PR_FALSE, 0, PR_FALSE },
{ /* cmd_TokenReset */ 'T', PR_FALSE, 0, PR_FALSE },
{ /* cmd_ListModules */ 'U', PR_FALSE, 0, PR_FALSE },
{ /* cmd_CheckCertValidity */ 'V', PR_FALSE, 0, PR_FALSE },
{ /* cmd_ChangePassword */ 'W', PR_FALSE, 0, PR_FALSE },
{ /* cmd_Version */ 'Y', PR_FALSE, 0, PR_FALSE },
{ /* cmd_Batch */ 'B', PR_FALSE, 0, PR_FALSE },
{ /* cmd_Merge */ 0, PR_FALSE, 0, PR_FALSE, "merge" },
{ /* cmd_UpgradeMerge */ 0, PR_FALSE, 0, PR_FALSE,
"upgrade-merge" }
};
#define NUM_COMMANDS ((sizeof commands_init) / (sizeof commands_init[0]))
static const
secuCommandFlag options_init[] =
{
{ /* opt_SSOPass */ '0', PR_TRUE, 0, PR_FALSE },
{ /* opt_AddKeyUsageExt */ '1', PR_FALSE, 0, PR_FALSE },
{ /* opt_AddBasicConstraintExt*/ '2', PR_FALSE, 0, PR_FALSE },
{ /* opt_AddAuthorityKeyIDExt*/ '3', PR_FALSE, 0, PR_FALSE },
{ /* opt_AddCRLDistPtsExt */ '4', PR_FALSE, 0, PR_FALSE },
{ /* opt_AddNSCertTypeExt */ '5', PR_FALSE, 0, PR_FALSE },
{ /* opt_AddExtKeyUsageExt */ '6', PR_FALSE, 0, PR_FALSE },
{ /* opt_ExtendedEmailAddrs */ '7', PR_TRUE, 0, PR_FALSE },
{ /* opt_ExtendedDNSNames */ '8', PR_TRUE, 0, PR_FALSE },
{ /* opt_ASCIIForIO */ 'a', PR_FALSE, 0, PR_FALSE },
{ /* opt_ValidityTime */ 'b', PR_TRUE, 0, PR_FALSE },
{ /* opt_IssuerName */ 'c', PR_TRUE, 0, PR_FALSE },
{ /* opt_CertDir */ 'd', PR_TRUE, 0, PR_FALSE },
{ /* opt_VerifySig */ 'e', PR_FALSE, 0, PR_FALSE },
{ /* opt_PasswordFile */ 'f', PR_TRUE, 0, PR_FALSE },
{ /* opt_KeySize */ 'g', PR_TRUE, 0, PR_FALSE },
{ /* opt_TokenName */ 'h', PR_TRUE, 0, PR_FALSE },
{ /* opt_InputFile */ 'i', PR_TRUE, 0, PR_FALSE },
{ /* opt_KeyIndex */ 'j', PR_TRUE, 0, PR_FALSE },
{ /* opt_KeyType */ 'k', PR_TRUE, 0, PR_FALSE },
{ /* opt_DetailedInfo */ 'l', PR_FALSE, 0, PR_FALSE },
{ /* opt_SerialNumber */ 'm', PR_TRUE, 0, PR_FALSE },
{ /* opt_Nickname */ 'n', PR_TRUE, 0, PR_FALSE },
{ /* opt_OutputFile */ 'o', PR_TRUE, 0, PR_FALSE },
{ /* opt_PhoneNumber */ 'p', PR_TRUE, 0, PR_FALSE },
{ /* opt_DBPrefix */ 'P', PR_TRUE, 0, PR_FALSE },
{ /* opt_PQGFile */ 'q', PR_TRUE, 0, PR_FALSE },
{ /* opt_BinaryDER */ 'r', PR_FALSE, 0, PR_FALSE },
{ /* opt_Subject */ 's', PR_TRUE, 0, PR_FALSE },
{ /* opt_Trust */ 't', PR_TRUE, 0, PR_FALSE },
{ /* opt_Usage */ 'u', PR_TRUE, 0, PR_FALSE },
{ /* opt_Validity */ 'v', PR_TRUE, 0, PR_FALSE },
{ /* opt_OffsetMonths */ 'w', PR_TRUE, 0, PR_FALSE },
{ /* opt_SelfSign */ 'x', PR_FALSE, 0, PR_FALSE },
{ /* opt_RW */ 'X', PR_FALSE, 0, PR_FALSE },
{ /* opt_Exponent */ 'y', PR_TRUE, 0, PR_FALSE },
{ /* opt_NoiseFile */ 'z', PR_TRUE, 0, PR_FALSE },
{ /* opt_Hash */ 'Z', PR_TRUE, 0, PR_FALSE },
{ /* opt_NewPasswordFile */ '@', PR_TRUE, 0, PR_FALSE },
{ /* opt_AddAuthInfoAccExt */ 0, PR_FALSE, 0, PR_FALSE, "extAIA" },
{ /* opt_AddSubjInfoAccExt */ 0, PR_FALSE, 0, PR_FALSE, "extSIA" },
{ /* opt_AddCertPoliciesExt */ 0, PR_FALSE, 0, PR_FALSE, "extCP" },
{ /* opt_AddPolicyMapExt */ 0, PR_FALSE, 0, PR_FALSE, "extPM" },
{ /* opt_AddPolicyConstrExt */ 0, PR_FALSE, 0, PR_FALSE, "extPC" },
{ /* opt_AddInhibAnyExt */ 0, PR_FALSE, 0, PR_FALSE, "extIA" },
{ /* opt_AddSubjectKeyIDExt */ 0, PR_FALSE, 0, PR_FALSE,
"extSKID" },
{ /* opt_AddCmdKeyUsageExt */ 0, PR_TRUE, 0, PR_FALSE,
"keyUsage" },
{ /* opt_AddCmdNSCertTypeExt */ 0, PR_TRUE, 0, PR_FALSE,
"nsCertType" },
{ /* opt_AddCmdExtKeyUsageExt*/ 0, PR_TRUE, 0, PR_FALSE,
"extKeyUsage" },
{ /* opt_SourceDir */ 0, PR_TRUE, 0, PR_FALSE,
"source-dir"},
{ /* opt_SourcePrefix */ 0, PR_TRUE, 0, PR_FALSE,
"source-prefix"},
{ /* opt_UpgradeID */ 0, PR_TRUE, 0, PR_FALSE,
"upgrade-id"},
{ /* opt_UpgradeTokenName */ 0, PR_TRUE, 0, PR_FALSE,
"upgrade-token-name"},
};
#define NUM_OPTIONS ((sizeof options_init) / (sizeof options_init[0]))
static secuCommandFlag certutil_commands[NUM_COMMANDS];
static secuCommandFlag certutil_options [NUM_OPTIONS ];
static const secuCommand certutil = {
NUM_COMMANDS,
NUM_OPTIONS,
certutil_commands,
certutil_options
};
static certutilExtnList certutil_extns;
static int
certutil_main(int argc, char **argv, PRBool initialize)
{
CERTCertDBHandle *certHandle;
PK11SlotInfo *slot = NULL;
CERTName * subject = 0;
PRFileDesc *inFile = PR_STDIN;
PRFileDesc *outFile = NULL;
char * certfile = "tempcert";
char * certreqfile = "tempcertreq";
char * slotname = "internal";
char * certPrefix = "";
char * sourceDir = "";
char * srcCertPrefix = "";
char * upgradeID = "";
char * upgradeTokenName = "";
KeyType keytype = rsaKey;
char * name = NULL;
char * keysource = NULL;
SECOidTag hashAlgTag = SEC_OID_UNKNOWN;
int keysize = DEFAULT_KEY_BITS;
int publicExponent = 0x010001;
unsigned int serialNumber = 0;
int warpmonths = 0;
int validityMonths = 3;
int commandsEntered = 0;
char commandToRun = '\0';
secuPWData pwdata = { PW_NONE, 0 };
secuPWData pwdata2 = { PW_NONE, 0 };
PRBool readOnly = PR_FALSE;
PRBool initialized = PR_FALSE;
SECKEYPrivateKey *privkey = NULL;
SECKEYPublicKey *pubkey = NULL;
int i;
SECStatus rv;
progName = PORT_Strrchr(argv[0], '/');
progName = progName ? progName+1 : argv[0];
memcpy(certutil_commands, commands_init, sizeof commands_init);
memcpy(certutil_options, options_init, sizeof options_init);
rv = SECU_ParseCommandLine(argc, argv, progName, &certutil);
if (rv != SECSuccess)
Usage(progName);
if (certutil.commands[cmd_PrintHelp].activated)
LongUsage(progName);
if (certutil.options[opt_PasswordFile].arg) {
pwdata.source = PW_FROMFILE;
pwdata.data = certutil.options[opt_PasswordFile].arg;
}
if (certutil.options[opt_NewPasswordFile].arg) {
pwdata2.source = PW_FROMFILE;
pwdata2.data = certutil.options[opt_NewPasswordFile].arg;
}
if (certutil.options[opt_CertDir].activated)
SECU_ConfigDirectory(certutil.options[opt_CertDir].arg);
if (certutil.options[opt_SourceDir].activated)
sourceDir = certutil.options[opt_SourceDir].arg;
if (certutil.options[opt_UpgradeID].activated)
upgradeID = certutil.options[opt_UpgradeID].arg;
if (certutil.options[opt_UpgradeTokenName].activated)
upgradeTokenName = certutil.options[opt_UpgradeTokenName].arg;
if (certutil.options[opt_KeySize].activated) {
keysize = PORT_Atoi(certutil.options[opt_KeySize].arg);
if ((keysize < MIN_KEY_BITS) || (keysize > MAX_KEY_BITS)) {
PR_fprintf(PR_STDERR,
"%s -g: Keysize must be between %d and %d.\n",
progName, MIN_KEY_BITS, MAX_KEY_BITS);
return 255;
}
#ifdef NSS_ENABLE_ECC
if (keytype == ecKey) {
PR_fprintf(PR_STDERR, "%s -g: Not for ec keys.\n", progName);
return 255;
}
#endif /* NSS_ENABLE_ECC */
}
/* -h specify token name */
if (certutil.options[opt_TokenName].activated) {
if (PL_strcmp(certutil.options[opt_TokenName].arg, "all") == 0)
slotname = NULL;
else
slotname = PL_strdup(certutil.options[opt_TokenName].arg);
}
/* -Z hash type */
if (certutil.options[opt_Hash].activated) {
char * arg = certutil.options[opt_Hash].arg;
hashAlgTag = SECU_StringToSignatureAlgTag(arg);
if (hashAlgTag == SEC_OID_UNKNOWN) {
PR_fprintf(PR_STDERR, "%s -Z: %s is not a recognized type.\n",
progName, arg);
return 255;
}
}
/* -k key type */
if (certutil.options[opt_KeyType].activated) {
char * arg = certutil.options[opt_KeyType].arg;
if (PL_strcmp(arg, "rsa") == 0) {
keytype = rsaKey;
} else if (PL_strcmp(arg, "dsa") == 0) {
keytype = dsaKey;
#ifdef NSS_ENABLE_ECC
} else if (PL_strcmp(arg, "ec") == 0) {
keytype = ecKey;
#endif /* NSS_ENABLE_ECC */
} else if (PL_strcmp(arg, "all") == 0) {
keytype = nullKey;
} else {
/* use an existing private/public key pair */
keysource = arg;
}
} else if (certutil.commands[cmd_ListKeys].activated) {
keytype = nullKey;
}
/* -m serial number */
if (certutil.options[opt_SerialNumber].activated) {
int sn = PORT_Atoi(certutil.options[opt_SerialNumber].arg);
if (sn < 0) {
PR_fprintf(PR_STDERR, "%s -m: %s is not a valid serial number.\n",
progName, certutil.options[opt_SerialNumber].arg);
return 255;
}
serialNumber = sn;
}
/* -P certdb name prefix */
if (certutil.options[opt_DBPrefix].activated) {
if (certutil.options[opt_DBPrefix].arg) {
certPrefix = strdup(certutil.options[opt_DBPrefix].arg);
} else {
Usage(progName);
}
}
/* --source-prefix certdb name prefix */
if (certutil.options[opt_SourcePrefix].activated) {
if (certutil.options[opt_SourcePrefix].arg) {
srcCertPrefix = strdup(certutil.options[opt_SourcePrefix].arg);
} else {
Usage(progName);
}
}
/* -q PQG file or curve name */
if (certutil.options[opt_PQGFile].activated) {
#ifdef NSS_ENABLE_ECC
if ((keytype != dsaKey) && (keytype != ecKey)) {
PR_fprintf(PR_STDERR, "%s -q: specifies a PQG file for DSA keys" \
" (-k dsa) or a named curve for EC keys (-k ec)\n)",
progName);
#else /* } */
if (keytype != dsaKey) {
PR_fprintf(PR_STDERR, "%s -q: PQG file is for DSA key (-k dsa).\n)",
progName);
#endif /* NSS_ENABLE_ECC */
return 255;
}
}
/* -s subject name */
if (certutil.options[opt_Subject].activated) {
subject = CERT_AsciiToName(certutil.options[opt_Subject].arg);
if (!subject) {
PR_fprintf(PR_STDERR, "%s -s: improperly formatted name: \"%s\"\n",
progName, certutil.options[opt_Subject].arg);
return 255;
}
}
/* -v validity period */
if (certutil.options[opt_Validity].activated) {
validityMonths = PORT_Atoi(certutil.options[opt_Validity].arg);
if (validityMonths < 0) {
PR_fprintf(PR_STDERR, "%s -v: incorrect validity period: \"%s\"\n",
progName, certutil.options[opt_Validity].arg);
return 255;
}
}
/* -w warp months */
if (certutil.options[opt_OffsetMonths].activated)
warpmonths = PORT_Atoi(certutil.options[opt_OffsetMonths].arg);
/* -y public exponent (for RSA) */
if (certutil.options[opt_Exponent].activated) {
publicExponent = PORT_Atoi(certutil.options[opt_Exponent].arg);
if ((publicExponent != 3) &&
(publicExponent != 17) &&
(publicExponent != 65537)) {
PR_fprintf(PR_STDERR, "%s -y: incorrect public exponent %d.",
progName, publicExponent);
PR_fprintf(PR_STDERR, "Must be 3, 17, or 65537.\n");
return 255;
}
}
/* Check number of commands entered. */
commandsEntered = 0;
for (i=0; i< certutil.numCommands; i++) {
if (certutil.commands[i].activated) {
commandToRun = certutil.commands[i].flag;
commandsEntered++;
}
if (commandsEntered > 1)
break;
}
if (commandsEntered > 1) {
PR_fprintf(PR_STDERR, "%s: only one command at a time!\n", progName);
PR_fprintf(PR_STDERR, "You entered: ");
for (i=0; i< certutil.numCommands; i++) {
if (certutil.commands[i].activated)
PR_fprintf(PR_STDERR, " -%c", certutil.commands[i].flag);
}
PR_fprintf(PR_STDERR, "\n");
return 255;
}
if (commandsEntered == 0) {
PR_fprintf(PR_STDERR, "%s: you must enter a command!\n", progName);
Usage(progName);
}
if (certutil.commands[cmd_ListCerts].activated ||
certutil.commands[cmd_PrintHelp].activated ||
certutil.commands[cmd_ListKeys].activated ||
certutil.commands[cmd_ListModules].activated ||
certutil.commands[cmd_CheckCertValidity].activated ||
certutil.commands[cmd_Version].activated ) {
readOnly = !certutil.options[opt_RW].activated;
}
/* -A, -D, -F, -M, -S, -V, and all require -n */
if ((certutil.commands[cmd_AddCert].activated ||
certutil.commands[cmd_DeleteCert].activated ||
certutil.commands[cmd_DeleteKey].activated ||
certutil.commands[cmd_DumpChain].activated ||
certutil.commands[cmd_ModifyCertTrust].activated ||
certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_CheckCertValidity].activated) &&
!certutil.options[opt_Nickname].activated) {
PR_fprintf(PR_STDERR,
"%s -%c: nickname is required for this command (-n).\n",
progName, commandToRun);
return 255;
}
/* -A, -E, -M, -S require trust */
if ((certutil.commands[cmd_AddCert].activated ||
certutil.commands[cmd_AddEmailCert].activated ||
certutil.commands[cmd_ModifyCertTrust].activated ||
certutil.commands[cmd_CreateAndAddCert].activated) &&
!certutil.options[opt_Trust].activated) {
PR_fprintf(PR_STDERR,
"%s -%c: trust is required for this command (-t).\n",
progName, commandToRun);
return 255;
}
/* if -L is given raw or ascii mode, it must be for only one cert. */
if (certutil.commands[cmd_ListCerts].activated &&
(certutil.options[opt_ASCIIForIO].activated ||
certutil.options[opt_BinaryDER].activated) &&
!certutil.options[opt_Nickname].activated) {
PR_fprintf(PR_STDERR,
"%s: nickname is required to dump cert in raw or ascii mode.\n",
progName);
return 255;
}
/* -L can only be in (raw || ascii). */
if (certutil.commands[cmd_ListCerts].activated &&
certutil.options[opt_ASCIIForIO].activated &&
certutil.options[opt_BinaryDER].activated) {
PR_fprintf(PR_STDERR,
"%s: cannot specify both -r and -a when dumping cert.\n",
progName);
return 255;
}
/* If making a cert request, need a subject. */
if ((certutil.commands[cmd_CertReq].activated ||
certutil.commands[cmd_CreateAndAddCert].activated) &&
!(certutil.options[opt_Subject].activated || keysource)) {
PR_fprintf(PR_STDERR,
"%s -%c: subject is required to create a cert request.\n",
progName, commandToRun);
return 255;
}
/* If making a cert, need a serial number. */
if ((certutil.commands[cmd_CreateNewCert].activated ||
certutil.commands[cmd_CreateAndAddCert].activated) &&
!certutil.options[opt_SerialNumber].activated) {
/* Make a default serial number from the current time. */
PRTime now = PR_Now();
LL_USHR(now, now, 19);
LL_L2UI(serialNumber, now);
}
/* Validation needs the usage to validate for. */
if (certutil.commands[cmd_CheckCertValidity].activated &&
!certutil.options[opt_Usage].activated) {
PR_fprintf(PR_STDERR,
"%s -V: specify a usage to validate the cert for (-u).\n",
progName);
return 255;
}
/* Upgrade/Merge needs a source database and a upgrade id. */
if (certutil.commands[cmd_UpgradeMerge].activated &&
!(certutil.options[opt_SourceDir].activated &&
certutil.options[opt_UpgradeID].activated)) {
PR_fprintf(PR_STDERR,
"%s --upgrade-merge: specify an upgrade database directory "
"(--source-dir) and\n"
" an upgrade ID (--upgrade-id).\n",
progName);
return 255;
}
/* Merge needs a source database */
if (certutil.commands[cmd_Merge].activated &&
!certutil.options[opt_SourceDir].activated) {
PR_fprintf(PR_STDERR,
"%s --merge: specify an source database directory "
"(--source-dir)\n",
progName);
return 255;
}
/* To make a cert, need either a issuer or to self-sign it. */
if (certutil.commands[cmd_CreateAndAddCert].activated &&
!(certutil.options[opt_IssuerName].activated ||
certutil.options[opt_SelfSign].activated)) {
PR_fprintf(PR_STDERR,
"%s -S: must specify issuer (-c) or self-sign (-x).\n",
progName);
return 255;
}
/* Using slotname == NULL for listing keys and certs on all slots,
* but only that. */
if (!(certutil.commands[cmd_ListKeys].activated ||
certutil.commands[cmd_DumpChain].activated ||
certutil.commands[cmd_ListCerts].activated) && slotname == NULL) {
PR_fprintf(PR_STDERR,
"%s -%c: cannot use \"-h all\" for this command.\n",
progName, commandToRun);
return 255;
}
/* Using keytype == nullKey for list all key types, but only that. */
if (!certutil.commands[cmd_ListKeys].activated && keytype == nullKey) {
PR_fprintf(PR_STDERR,
"%s -%c: cannot use \"-k all\" for this command.\n",
progName, commandToRun);
return 255;
}
/* -S open outFile, temporary file for cert request. */
if (certutil.commands[cmd_CreateAndAddCert].activated) {
outFile = PR_Open(certreqfile,
PR_RDWR | PR_CREATE_FILE | PR_TRUNCATE, 00660);
if (!outFile) {
PR_fprintf(PR_STDERR,
"%s -o: unable to open \"%s\" for writing (%ld, %ld)\n",
progName, certreqfile,
PR_GetError(), PR_GetOSError());
return 255;
}
}
/* Open the input file. */
if (certutil.options[opt_InputFile].activated) {
inFile = PR_Open(certutil.options[opt_InputFile].arg, PR_RDONLY, 0);
if (!inFile) {
PR_fprintf(PR_STDERR,
"%s: unable to open \"%s\" for reading (%ld, %ld).\n",
progName, certutil.options[opt_InputFile].arg,
PR_GetError(), PR_GetOSError());
return 255;
}
}
/* Open the output file. */
if (certutil.options[opt_OutputFile].activated && !outFile) {
outFile = PR_Open(certutil.options[opt_OutputFile].arg,
PR_CREATE_FILE | PR_RDWR | PR_TRUNCATE, 00660);
if (!outFile) {
PR_fprintf(PR_STDERR,
"%s: unable to open \"%s\" for writing (%ld, %ld).\n",
progName, certutil.options[opt_OutputFile].arg,
PR_GetError(), PR_GetOSError());
return 255;
}
}
name = SECU_GetOptionArg(&certutil, opt_Nickname);
PK11_SetPasswordFunc(SECU_GetModulePassword);
if (PR_TRUE == initialize) {
/* Initialize NSPR and NSS. */
PR_Init(PR_SYSTEM_THREAD, PR_PRIORITY_NORMAL, 1);
if (!certutil.commands[cmd_UpgradeMerge].activated) {
rv = NSS_Initialize(SECU_ConfigDirectory(NULL),
certPrefix, certPrefix,
"secmod.db", readOnly ? NSS_INIT_READONLY: 0);
} else {
rv = NSS_InitWithMerge(SECU_ConfigDirectory(NULL),
certPrefix, certPrefix, "secmod.db",
sourceDir, srcCertPrefix, srcCertPrefix,
upgradeID, upgradeTokenName,
readOnly ? NSS_INIT_READONLY: 0);
}
if (rv != SECSuccess) {
SECU_PrintPRandOSError(progName);
rv = SECFailure;
goto shutdown;
}
initialized = PR_TRUE;
SECU_RegisterDynamicOids();
}
certHandle = CERT_GetDefaultCertDB();
if (certutil.commands[cmd_Version].activated) {
printf("Certificate database content version: command not implemented.\n");
}
if (PL_strcmp(slotname, "internal") == 0)
slot = PK11_GetInternalKeySlot();
else if (slotname != NULL)
slot = PK11_FindSlotByName(slotname);
if ( !slot && (certutil.commands[cmd_NewDBs].activated ||
certutil.commands[cmd_ModifyCertTrust].activated ||
certutil.commands[cmd_ChangePassword].activated ||
certutil.commands[cmd_TokenReset].activated ||
certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_AddCert].activated ||
certutil.commands[cmd_Merge].activated ||
certutil.commands[cmd_UpgradeMerge].activated ||
certutil.commands[cmd_AddEmailCert].activated)) {
SECU_PrintError(progName, "could not find the slot %s",slotname);
rv = SECFailure;
goto shutdown;
}
/* If creating new database, initialize the password. */
if (certutil.commands[cmd_NewDBs].activated) {
SECU_ChangePW2(slot, 0, 0, certutil.options[opt_PasswordFile].arg,
certutil.options[opt_NewPasswordFile].arg);
}
/* walk through the upgrade merge if necessary.
* This option is more to test what some applications will want to do
* to do an automatic upgrade. The --merge command is more useful for
* the general case where 2 database need to be merged together.
*/
if (certutil.commands[cmd_UpgradeMerge].activated) {
if (*upgradeTokenName == 0) {
upgradeTokenName = upgradeID;
}
if (!PK11_IsInternal(slot)) {
fprintf(stderr, "Only internal DB's can be upgraded\n");
rv = SECSuccess;
goto shutdown;
}
if (!PK11_IsRemovable(slot)) {
printf("database already upgraded.\n");
rv = SECSuccess;
goto shutdown;
}
if (!PK11_NeedLogin(slot)) {
printf("upgrade complete!\n");
rv = SECSuccess;
goto shutdown;
}
/* authenticate to the old DB if necessary */
if (PORT_Strcmp(PK11_GetTokenName(slot), upgradeTokenName) == 0) {
/* if we need a password, supply it. This will be the password
* for the old database */
rv = PK11_Authenticate(slot, PR_FALSE, &pwdata2);
if (rv != SECSuccess) {
SECU_PrintError(progName, "Could not get password for %s",
upgradeTokenName);
goto shutdown;
}
/*
* if we succeeded above, but still aren't logged in, that means
* we just supplied the password for the old database. We may
* need the password for the new database. NSS will automatically
* change the token names at this point
*/
if (PK11_IsLoggedIn(slot, &pwdata)) {
printf("upgrade complete!\n");
rv = SECSuccess;
goto shutdown;
}
}
/* call PK11_IsPresent to update our cached token information */
if (!PK11_IsPresent(slot)) {
/* this shouldn't happen. We call isPresent to force a token
* info update */
fprintf(stderr, "upgrade/merge internal error\n");
rv = SECFailure;
goto shutdown;
}
/* the token is now set to the state of the source database,
* if we need a password for it, PK11_Authenticate will
* automatically prompt us */
rv = PK11_Authenticate(slot, PR_FALSE, &pwdata);
if (rv == SECSuccess) {
printf("upgrade complete!\n");
} else {
SECU_PrintError(progName, "Could not get password for %s",
PK11_GetTokenName(slot));
}
goto shutdown;
}
/*
* merge 2 databases.
*/
if (certutil.commands[cmd_Merge].activated) {
PK11SlotInfo *sourceSlot = NULL;
PK11MergeLog *log;
char *modspec = PR_smprintf(
"configDir='%s' certPrefix='%s' tokenDescription='%s'",
sourceDir, srcCertPrefix,
*upgradeTokenName ? upgradeTokenName : "Source Database");
if (!modspec) {
rv = SECFailure;
goto shutdown;
}
sourceSlot = SECMOD_OpenUserDB(modspec);
PR_smprintf_free(modspec);
if (!sourceSlot) {
SECU_PrintError(progName, "couldn't open source database");
rv = SECFailure;
goto shutdown;
}
rv = PK11_Authenticate(slot, PR_FALSE, &pwdata);
if (rv != SECSuccess) {
SECU_PrintError(progName, "Couldn't get password for %s",
PK11_GetTokenName(slot));
goto merge_fail;
}
rv = PK11_Authenticate(sourceSlot, PR_FALSE, &pwdata2);
if (rv != SECSuccess) {
SECU_PrintError(progName, "Couldn't get password for %s",
PK11_GetTokenName(sourceSlot));
goto merge_fail;
}
log = PK11_CreateMergeLog();
if (!log) {
rv = SECFailure;
SECU_PrintError(progName, "couldn't create error log");
goto merge_fail;
}
rv = PK11_MergeTokens(slot, sourceSlot, log, &pwdata, &pwdata2);
if (rv != SECSuccess) {
DumpMergeLog(progName, log);
}
PK11_DestroyMergeLog(log);
merge_fail:
SECMOD_CloseUserDB(sourceSlot);
PK11_FreeSlot(sourceSlot);
goto shutdown;
}
/* The following 8 options are mutually exclusive with all others. */
/* List certs (-L) */
if (certutil.commands[cmd_ListCerts].activated) {
rv = ListCerts(certHandle, name, slot,
certutil.options[opt_BinaryDER].activated,
certutil.options[opt_ASCIIForIO].activated,
(outFile) ? outFile : PR_STDOUT, &pwdata);
goto shutdown;
}
if (certutil.commands[cmd_DumpChain].activated) {
rv = DumpChain(certHandle, name);
goto shutdown;
}
/* XXX needs work */
/* List keys (-K) */
if (certutil.commands[cmd_ListKeys].activated) {
rv = ListKeys(slot, name, 0 /*keyindex*/, keytype, PR_FALSE /*dopriv*/,
&pwdata);
goto shutdown;
}
/* List modules (-U) */
if (certutil.commands[cmd_ListModules].activated) {
rv = ListModules();
goto shutdown;
}
/* Delete cert (-D) */
if (certutil.commands[cmd_DeleteCert].activated) {
rv = DeleteCert(certHandle, name);
goto shutdown;
}
/* Delete key (-F) */
if (certutil.commands[cmd_DeleteKey].activated) {
rv = DeleteKey(name, &pwdata);
goto shutdown;
}
/* Modify trust attribute for cert (-M) */
if (certutil.commands[cmd_ModifyCertTrust].activated) {
rv = ChangeTrustAttributes(certHandle, slot, name,
certutil.options[opt_Trust].arg, &pwdata);
goto shutdown;
}
/* Change key db password (-W) (future - change pw to slot?) */
if (certutil.commands[cmd_ChangePassword].activated) {
rv = SECU_ChangePW2(slot, 0, 0, certutil.options[opt_PasswordFile].arg,
certutil.options[opt_NewPasswordFile].arg);
goto shutdown;
}
/* Reset the a token */
if (certutil.commands[cmd_TokenReset].activated) {
char *sso_pass = "";
if (certutil.options[opt_SSOPass].activated) {
sso_pass = certutil.options[opt_SSOPass].arg;
}
rv = PK11_ResetToken(slot,sso_pass);
goto shutdown;
}
/* Check cert validity against current time (-V) */
if (certutil.commands[cmd_CheckCertValidity].activated) {
/* XXX temporary hack for fips - must log in to get priv key */
if (certutil.options[opt_VerifySig].activated) {
if (slot && PK11_NeedLogin(slot)) {
SECStatus newrv = PK11_Authenticate(slot, PR_TRUE, &pwdata);
if (newrv != SECSuccess) {
SECU_PrintError(progName, "could not authenticate to token %s.",
PK11_GetTokenName(slot));
goto shutdown;
}
}
}
rv = ValidateCert(certHandle, name,
certutil.options[opt_ValidityTime].arg,
certutil.options[opt_Usage].arg,
certutil.options[opt_VerifySig].activated,
certutil.options[opt_DetailedInfo].activated,
&pwdata);
if (rv != SECSuccess && PR_GetError() == SEC_ERROR_INVALID_ARGS)
SECU_PrintError(progName, "validation failed");
goto shutdown;
}
/*
* Key generation
*/
/* These commands may require keygen. */
if (certutil.commands[cmd_CertReq].activated ||
certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_GenKeyPair].activated) {
if (keysource) {
CERTCertificate *keycert;
keycert = CERT_FindCertByNicknameOrEmailAddr(certHandle, keysource);
if (!keycert) {
keycert = PK11_FindCertFromNickname(keysource, NULL);
if (!keycert) {
SECU_PrintError(progName,
"%s is neither a key-type nor a nickname", keysource);
return SECFailure;
}
}
privkey = PK11_FindKeyByDERCert(slot, keycert, &pwdata);
if (privkey)
pubkey = CERT_ExtractPublicKey(keycert);
if (!pubkey) {
SECU_PrintError(progName,
"Could not get keys from cert %s", keysource);
rv = SECFailure;
CERT_DestroyCertificate(keycert);
goto shutdown;
}
keytype = privkey->keyType;
/* On CertReq for renewal if no subject has been
* specified obtain it from the certificate.
*/
if (certutil.commands[cmd_CertReq].activated && !subject) {
subject = CERT_AsciiToName(keycert->subjectName);
if (!subject) {
SECU_PrintError(progName,
"Could not get subject from certificate %s", keysource);
CERT_DestroyCertificate(keycert);
rv = SECFailure;
goto shutdown;
}
}
CERT_DestroyCertificate(keycert);
} else {
privkey =
CERTUTIL_GeneratePrivateKey(keytype, slot, keysize,
publicExponent,
certutil.options[opt_NoiseFile].arg,
&pubkey,
certutil.options[opt_PQGFile].arg,
&pwdata);
if (privkey == NULL) {
SECU_PrintError(progName, "unable to generate key(s)\n");
rv = SECFailure;
goto shutdown;
}
}
privkey->wincx = &pwdata;
PORT_Assert(pubkey != NULL);
/* If all that was needed was keygen, exit. */
if (certutil.commands[cmd_GenKeyPair].activated) {
rv = SECSuccess;
goto shutdown;
}
}
/* If we need a list of extensions convert the flags into list format */
if (certutil.commands[cmd_CertReq].activated ||
certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_CreateNewCert].activated) {
certutil_extns[ext_keyUsage].activated =
certutil.options[opt_AddCmdKeyUsageExt].activated;
if (!certutil_extns[ext_keyUsage].activated) {
certutil_extns[ext_keyUsage].activated =
certutil.options[opt_AddKeyUsageExt].activated;
} else {
certutil_extns[ext_keyUsage].arg =
certutil.options[opt_AddCmdKeyUsageExt].arg;
}
certutil_extns[ext_basicConstraint].activated =
certutil.options[opt_AddBasicConstraintExt].activated;
certutil_extns[ext_authorityKeyID].activated =
certutil.options[opt_AddAuthorityKeyIDExt].activated;
certutil_extns[ext_subjectKeyID].activated =
certutil.options[opt_AddSubjectKeyIDExt].activated;
certutil_extns[ext_CRLDistPts].activated =
certutil.options[opt_AddCRLDistPtsExt].activated;
certutil_extns[ext_NSCertType].activated =
certutil.options[opt_AddCmdNSCertTypeExt].activated;
if (!certutil_extns[ext_NSCertType].activated) {
certutil_extns[ext_NSCertType].activated =
certutil.options[opt_AddNSCertTypeExt].activated;
} else {
certutil_extns[ext_NSCertType].arg =
certutil.options[opt_AddCmdNSCertTypeExt].arg;
}
certutil_extns[ext_extKeyUsage].activated =
certutil.options[opt_AddCmdExtKeyUsageExt].activated;
if (!certutil_extns[ext_extKeyUsage].activated) {
certutil_extns[ext_extKeyUsage].activated =
certutil.options[opt_AddExtKeyUsageExt].activated;
} else {
certutil_extns[ext_extKeyUsage].arg =
certutil.options[opt_AddCmdExtKeyUsageExt].arg;
}
certutil_extns[ext_authInfoAcc].activated =
certutil.options[opt_AddAuthInfoAccExt].activated;
certutil_extns[ext_subjInfoAcc].activated =
certutil.options[opt_AddSubjInfoAccExt].activated;
certutil_extns[ext_certPolicies].activated =
certutil.options[opt_AddCertPoliciesExt].activated;
certutil_extns[ext_policyMappings].activated =
certutil.options[opt_AddPolicyMapExt].activated;
certutil_extns[ext_policyConstr].activated =
certutil.options[opt_AddPolicyConstrExt].activated;
certutil_extns[ext_inhibitAnyPolicy].activated =
certutil.options[opt_AddInhibAnyExt].activated;
}
/*
* Certificate request
*/
/* Make a cert request (-R). */
if (certutil.commands[cmd_CertReq].activated) {
rv = CertReq(privkey, pubkey, keytype, hashAlgTag, subject,
certutil.options[opt_PhoneNumber].arg,
certutil.options[opt_ASCIIForIO].activated,
certutil.options[opt_ExtendedEmailAddrs].arg,
certutil.options[opt_ExtendedDNSNames].arg,
certutil_extns,
outFile ? outFile : PR_STDOUT);
if (rv)
goto shutdown;
privkey->wincx = &pwdata;
}
/*
* Certificate creation
*/
/* If making and adding a cert, create a cert request file first without
* any extensions, then load it with the command line extensions
* and output the cert to another file.
*/
if (certutil.commands[cmd_CreateAndAddCert].activated) {
static certutilExtnList nullextnlist = {{PR_FALSE, NULL}};
rv = CertReq(privkey, pubkey, keytype, hashAlgTag, subject,
certutil.options[opt_PhoneNumber].arg,
certutil.options[opt_ASCIIForIO].activated,
NULL,
NULL,
nullextnlist,
outFile ? outFile : PR_STDOUT);
if (rv)
goto shutdown;
privkey->wincx = &pwdata;
PR_Close(outFile);
inFile = PR_Open(certreqfile, PR_RDONLY, 0);
if (!inFile) {
PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n",
certreqfile, PR_GetError(), PR_GetOSError());
rv = SECFailure;
goto shutdown;
}
outFile = PR_Open(certfile,
PR_RDWR | PR_CREATE_FILE | PR_TRUNCATE, 00660);
if (!outFile) {
PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n",
certfile, PR_GetError(), PR_GetOSError());
rv = SECFailure;
goto shutdown;
}
}
/* Create a certificate (-C or -S). */
if (certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_CreateNewCert].activated) {
rv = CreateCert(certHandle, slot,
certutil.options[opt_IssuerName].arg,
inFile, outFile, &privkey, &pwdata, hashAlgTag,
serialNumber, warpmonths, validityMonths,
certutil.options[opt_ExtendedEmailAddrs].arg,
certutil.options[opt_ExtendedDNSNames].arg,
certutil.options[opt_ASCIIForIO].activated,
certutil.options[opt_SelfSign].activated,
certutil_extns);
if (rv)
goto shutdown;
}
/*
* Adding a cert to the database (or slot)
*/
if (certutil.commands[cmd_CreateAndAddCert].activated) {
PORT_Assert(inFile != PR_STDIN);
PR_Close(inFile);
PR_Close(outFile);
inFile = PR_Open(certfile, PR_RDONLY, 0);
if (!inFile) {
PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n",
certfile, PR_GetError(), PR_GetOSError());
rv = SECFailure;
goto shutdown;
}
}
/* -A -E or -S Add the cert to the DB */
if (certutil.commands[cmd_CreateAndAddCert].activated ||
certutil.commands[cmd_AddCert].activated ||
certutil.commands[cmd_AddEmailCert].activated) {
rv = AddCert(slot, certHandle, name,
certutil.options[opt_Trust].arg,
inFile,
certutil.options[opt_ASCIIForIO].activated,
certutil.commands[cmd_AddEmailCert].activated,&pwdata);
if (rv)
goto shutdown;
}
if (certutil.commands[cmd_CreateAndAddCert].activated) {
PORT_Assert(inFile != PR_STDIN);
PR_Close(inFile);
PR_Delete(certfile);
PR_Delete(certreqfile);
}
shutdown:
if (slot) {
PK11_FreeSlot(slot);
}
if (privkey) {
SECKEY_DestroyPrivateKey(privkey);
}
if (pubkey) {
SECKEY_DestroyPublicKey(pubkey);
}
/* Open the batch command file.
*
* - If -B <command line> option is specified, the contents in the
* command file will be interpreted as subsequent certutil
* commands to be executed in the current certutil process
* context after the current certutil command has been executed.
* - Each line in the command file consists of the command
* line arguments for certutil.
* - The -d <configdir> option will be ignored if specified in the
* command file.
* - Quoting with double quote characters ("...") is supported
* to allow white space in a command line argument. The
* double quote character cannot be escaped and quoting cannot
* be nested in this version.
* - each line in the batch file is limited to 512 characters
*/
if ((SECSuccess == rv) && certutil.commands[cmd_Batch].activated) {
FILE* batchFile = NULL;
char nextcommand[512];
if (!certutil.options[opt_InputFile].activated ||
!certutil.options[opt_InputFile].arg) {
PR_fprintf(PR_STDERR,
"%s: no batch input file specified.\n",
progName);
return 255;
}
batchFile = fopen(certutil.options[opt_InputFile].arg, "r");
if (!batchFile) {
PR_fprintf(PR_STDERR,
"%s: unable to open \"%s\" for reading (%ld, %ld).\n",
progName, certutil.options[opt_InputFile].arg,
PR_GetError(), PR_GetOSError());
return 255;
}
/* read and execute command-lines in a loop */
while ( (SECSuccess == rv ) &&
fgets(nextcommand, sizeof(nextcommand), batchFile)) {
/* we now need to split the command into argc / argv format */
char* commandline = PORT_Strdup(nextcommand);
PRBool invalid = PR_FALSE;
int newargc = 2;
char* space = NULL;
char* nextarg = NULL;
char** newargv = NULL;
char* crlf = PORT_Strrchr(commandline, '\n');
if (crlf) {
*crlf = '\0';
}
newargv = PORT_Alloc(sizeof(char*)*(newargc+1));
newargv[0] = progName;
newargv[1] = commandline;
nextarg = commandline;
while ((space = PORT_Strpbrk(nextarg, " \f\n\r\t\v")) ) {
while (isspace(*space) ) {
*space = '\0';
space ++;
}
if (*space == '\0') {
break;
} else if (*space != '\"') {
nextarg = space;
} else {
char* closingquote = strchr(space+1, '\"');
if (closingquote) {
*closingquote = '\0';
space++;
nextarg = closingquote+1;
} else {
invalid = PR_TRUE;
nextarg = space;
}
}
newargc++;
newargv = PORT_Realloc(newargv, sizeof(char*)*(newargc+1));
newargv[newargc-1] = space;
}
newargv[newargc] = NULL;
/* invoke next command */
if (PR_TRUE == invalid) {
PR_fprintf(PR_STDERR, "Missing closing quote in batch command :\n%s\nNot executed.\n",
nextcommand);
rv = SECFailure;
} else {
if (0 != certutil_main(newargc, newargv, PR_FALSE) )
rv = SECFailure;
}
PORT_Free(newargv);
PORT_Free(commandline);
}
fclose(batchFile);
}
if ((initialized == PR_TRUE) && NSS_Shutdown() != SECSuccess) {
exit(1);
}
if (rv == SECSuccess) {
return 0;
} else {
return 255;
}
}
int
main(int argc, char **argv)
{
int rv = certutil_main(argc, argv, PR_TRUE);
PR_Cleanup();
return rv;
}