gecko/netwerk/base/NetUtil.jsm

479 lines
19 KiB
JavaScript

/* -*- indent-tabs-mode: nil; js-indent-level: 4 -*-
* vim: sw=4 ts=4 sts=4 et filetype=javascript
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
this.EXPORTED_SYMBOLS = [
"NetUtil",
];
/**
* Necko utilities
*/
////////////////////////////////////////////////////////////////////////////////
//// Constants
const Ci = Components.interfaces;
const Cc = Components.classes;
const Cr = Components.results;
const Cu = Components.utils;
const PR_UINT32_MAX = 0xffffffff;
Components.utils.import("resource://gre/modules/XPCOMUtils.jsm");
Components.utils.import("resource://gre/modules/Services.jsm");
////////////////////////////////////////////////////////////////////////////////
//// NetUtil Object
this.NetUtil = {
/**
* Function to perform simple async copying from aSource (an input stream)
* to aSink (an output stream). The copy will happen on some background
* thread. Both streams will be closed when the copy completes.
*
* @param aSource
* The input stream to read from
* @param aSink
* The output stream to write to
* @param aCallback [optional]
* A function that will be called at copy completion with a single
* argument: the nsresult status code for the copy operation.
*
* @return An nsIRequest representing the copy operation (for example, this
* can be used to cancel the copying). The consumer can ignore the
* return value if desired.
*/
asyncCopy: function NetUtil_asyncCopy(aSource, aSink,
aCallback = null)
{
if (!aSource || !aSink) {
let exception = new Components.Exception(
"Must have a source and a sink",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
throw exception;
}
// make a stream copier
var copier = Cc["@mozilla.org/network/async-stream-copier;1"].
createInstance(Ci.nsIAsyncStreamCopier2);
copier.init(aSource, aSink,
null /* Default event target */,
0 /* Default length */,
true, true /* Auto-close */);
var observer;
if (aCallback) {
observer = {
onStartRequest: function(aRequest, aContext) {},
onStopRequest: function(aRequest, aContext, aStatusCode) {
aCallback(aStatusCode);
}
}
} else {
observer = null;
}
// start the copying
copier.QueryInterface(Ci.nsIAsyncStreamCopier).asyncCopy(observer, null);
return copier;
},
/**
* Asynchronously opens a source and fetches the response. While the fetch
* is asynchronous, I/O may happen on the main thread. When reading from
* a local file, prefer using "OS.File" methods instead.
*
* @param aSource
* This argument can be one of the following:
* - An options object that will be passed to NetUtil.newChannel.
* - An existing nsIChannel.
* - An existing nsIInputStream.
* Using an nsIURI, nsIFile, or string spec directly is deprecated.
* @param aCallback
* The callback function that will be notified upon completion. It
* will get these arguments:
* 1) An nsIInputStream containing the data from aSource, if any.
* 2) The status code from opening the source.
* 3) Reference to the nsIRequest.
*/
asyncFetch: function NetUtil_asyncFetch(aSource, aCallback)
{
if (!aSource || !aCallback) {
let exception = new Components.Exception(
"Must have a source and a callback",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
throw exception;
}
// Create a pipe that will create our output stream that we can use once
// we have gotten all the data.
let pipe = Cc["@mozilla.org/pipe;1"].
createInstance(Ci.nsIPipe);
pipe.init(true, true, 0, PR_UINT32_MAX, null);
// Create a listener that will give data to the pipe's output stream.
let listener = Cc["@mozilla.org/network/simple-stream-listener;1"].
createInstance(Ci.nsISimpleStreamListener);
listener.init(pipe.outputStream, {
onStartRequest: function(aRequest, aContext) {},
onStopRequest: function(aRequest, aContext, aStatusCode) {
pipe.outputStream.close();
aCallback(pipe.inputStream, aStatusCode, aRequest);
}
});
// Input streams are handled slightly differently from everything else.
if (aSource instanceof Ci.nsIInputStream) {
let pump = Cc["@mozilla.org/network/input-stream-pump;1"].
createInstance(Ci.nsIInputStreamPump);
pump.init(aSource, -1, -1, 0, 0, true);
pump.asyncRead(listener, null);
return;
}
let channel = aSource;
if (!(channel instanceof Ci.nsIChannel)) {
channel = this.newChannel(aSource);
}
try {
channel.asyncOpen(listener, null);
}
catch (e) {
let exception = new Components.Exception(
"Failed to open input source '" + channel.originalURI.spec + "'",
e.result,
Components.stack.caller,
aSource,
e
);
throw exception;
}
},
/**
* Constructs a new URI for the given spec, character set, and base URI, or
* an nsIFile.
*
* @param aTarget
* The string spec for the desired URI or an nsIFile.
* @param aOriginCharset [optional]
* The character set for the URI. Only used if aTarget is not an
* nsIFile.
* @param aBaseURI [optional]
* The base URI for the spec. Only used if aTarget is not an
* nsIFile.
*
* @return an nsIURI object.
*/
newURI: function NetUtil_newURI(aTarget, aOriginCharset, aBaseURI)
{
if (!aTarget) {
let exception = new Components.Exception(
"Must have a non-null string spec or nsIFile object",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
throw exception;
}
if (aTarget instanceof Ci.nsIFile) {
return this.ioService.newFileURI(aTarget);
}
return this.ioService.newURI(aTarget, aOriginCharset, aBaseURI);
},
/**
* Constructs a new channel for the given source.
*
* Keep in mind that URIs coming from a webpage should *never* use the
* systemPrincipal as the loadingPrincipal.
*
* @param aWhatToLoad
* This argument used to be a string spec for the desired URI, an
* nsIURI, or an nsIFile. Now it should be an options object with
* the following properties:
* {
* uri:
* The full URI spec string or nsIURI to create the channel for.
* Note that this cannot be an nsIFile and you cannot specify a
* non-default charset or base URI. Call NetUtil.newURI first if
* you need to construct an URI using those options.
* loadingNode:
* The loadingDocument of the channel.
* The element or document where the result of this request will
* be used. This is the document/element that will get access to
* the result of this request. For example for an image load,
* it's the document in which the image will be loaded. And for
* a CSS stylesheet it's the document whose rendering will be
* affected by the stylesheet.
* If possible, pass in the element which is performing the load.
* But if the load is coming from a JS API (such as
* XMLHttpRequest) or if the load might be coalesced across
* multiple elements (such as for <img>) then pass in the
* Document node instead.
* For loads that are not related to any document, such as loads
* coming from addons or internal browser features, omit this
* property and specify a loadingPrincipal or
* loadUsingSystemPrincipal instead.
* loadingPrincipal:
* The loadingPrincipal of the channel.
* The principal of the document where the result of this request
* will be used.
* This defaults to the principal of aLoadingNode, so when
* aLoadingNode is passed this can be left as null. However for
* loads where aLoadingNode is null this argument must be passed.
* For example for loads from a WebWorker, pass the principal of
* that worker. For loads from an addon or from internal browser
* features, pass the system principal.
* This principal should almost always be the system principal if
* loadingNode is omitted, in which case you can use the
* useSystemPrincipal property. The only exception to this is
* for loads from WebWorkers since they don't have any nodes to
* be passed as loadingNode.
* Please note, loadingPrincipal is *not* the principal of the
* resource being loaded, but rather the principal of the context
* where the resource will be used.
* loadUsingSystemPrincipal:
* Set this to true to use the system principal as
* loadingPrincipal. This must be omitted if loadingPrincipal or
* loadingNode are present.
* This should be used with care as it skips security checks.
* triggeringPrincipal:
* The triggeringPrincipal of the load.
* The triggeringPrincipal is the principal of the resource that
* caused this particular URL to be loaded.
* Most likely the triggeringPrincipal and the loadingPrincipal
* are identical, in which case the triggeringPrincipal can be
* left out. In some cases the loadingPrincipal and the
* triggeringPrincipal are different however, e.g. a stylesheet
* may import a subresource. In that case the principal of the
* stylesheet which contains the import command is the
* triggeringPrincipal, and the principal of the document whose
* rendering is affected is the loadingPrincipal.
* securityFlags:
* The securityFlags of the channel.
* Any of the securityflags defined in nsILoadInfo.idl.
* contentPolicyType:
* The contentPolicyType of the channel.
* Any of the content types defined in nsIContentPolicy.idl.
* }
* @param aOriginCharset [deprecated]
* The character set for the URI. Only used if aWhatToLoad is a
* string, which is a deprecated API. Must be undefined otherwise.
* Use NetUtil.newURI if you need to use this option.
* @param aBaseURI [deprecated]
* The base URI for the spec. Only used if aWhatToLoad is a string,
* which is a deprecated API. Must be undefined otherwise. Use
* NetUtil.newURI if you need to use this option.
*
* @return an nsIChannel object.
*/
newChannel: function NetUtil_newChannel(aWhatToLoad, aOriginCharset,
aBaseURI)
{
// Check for the deprecated API first.
if (typeof aWhatToLoad == "string" ||
(aWhatToLoad instanceof Ci.nsIFile) ||
(aWhatToLoad instanceof Ci.nsIURI)) {
let uri = (aWhatToLoad instanceof Ci.nsIURI)
? aWhatToLoad
: this.newURI(aWhatToLoad, aOriginCharset, aBaseURI);
return this.ioService.newChannelFromURI(uri);
}
// We are using the updated API, that requires only the options object.
if (typeof aWhatToLoad != "object" ||
aOriginCharset !== undefined ||
aBaseURI !== undefined) {
throw new Components.Exception(
"newChannel requires a single object argument",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
let { uri,
loadingNode,
loadingPrincipal,
loadUsingSystemPrincipal,
triggeringPrincipal,
securityFlags,
contentPolicyType } = aWhatToLoad;
if (!uri) {
throw new Components.Exception(
"newChannel requires the 'uri' property on the options object.",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
if (typeof uri == "string") {
uri = this.newURI(uri);
}
if (!loadingNode && !loadingPrincipal && !loadUsingSystemPrincipal) {
throw new Components.Exception(
"newChannel requires at least one of the 'loadingNode'," +
" 'loadingPrincipal', or 'loadUsingSystemPrincipal'" +
" properties on the options object.",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
if (loadUsingSystemPrincipal === true) {
if (loadingNode || loadingPrincipal) {
throw new Components.Exception(
"newChannel does not accept 'loadUsingSystemPrincipal'" +
" if the 'loadingNode' or 'loadingPrincipal' properties" +
" are present on the options object.",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
loadingPrincipal = Services.scriptSecurityManager
.getSystemPrincipal();
} else if (loadUsingSystemPrincipal !== undefined) {
throw new Components.Exception(
"newChannel requires the 'loadUsingSystemPrincipal'" +
" property on the options object to be 'true' or 'undefined'.",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
if (securityFlags === undefined) {
securityFlags = Ci.nsILoadInfo.SEC_NORMAL;
}
if (contentPolicyType === undefined) {
if (!loadUsingSystemPrincipal) {
throw new Components.Exception(
"newChannel requires the 'contentPolicyType' property on" +
" the options object unless loading from system principal.",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
}
contentPolicyType = Ci.nsIContentPolicy.TYPE_OTHER;
}
return this.ioService.newChannelFromURI2(uri,
loadingNode || null,
loadingPrincipal || null,
triggeringPrincipal || null,
securityFlags,
contentPolicyType);
},
/**
* Reads aCount bytes from aInputStream into a string.
*
* @param aInputStream
* The input stream to read from.
* @param aCount
* The number of bytes to read from the stream.
* @param aOptions [optional]
* charset
* The character encoding of stream data.
* replacement
* The character to replace unknown byte sequences.
* If unset, it causes an exceptions to be thrown.
*
* @return the bytes from the input stream in string form.
*
* @throws NS_ERROR_INVALID_ARG if aInputStream is not an nsIInputStream.
* @throws NS_BASE_STREAM_WOULD_BLOCK if reading from aInputStream would
* block the calling thread (non-blocking mode only).
* @throws NS_ERROR_FAILURE if there are not enough bytes available to read
* aCount amount of data.
* @throws NS_ERROR_ILLEGAL_INPUT if aInputStream has invalid sequences
*/
readInputStreamToString: function NetUtil_readInputStreamToString(aInputStream,
aCount,
aOptions)
{
if (!(aInputStream instanceof Ci.nsIInputStream)) {
let exception = new Components.Exception(
"First argument should be an nsIInputStream",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
throw exception;
}
if (!aCount) {
let exception = new Components.Exception(
"Non-zero amount of bytes must be specified",
Cr.NS_ERROR_INVALID_ARG,
Components.stack.caller
);
throw exception;
}
if (aOptions && "charset" in aOptions) {
let cis = Cc["@mozilla.org/intl/converter-input-stream;1"].
createInstance(Ci.nsIConverterInputStream);
try {
// When replacement is set, the character that is unknown sequence
// replaces with aOptions.replacement character.
if (!("replacement" in aOptions)) {
// aOptions.replacement isn't set.
// If input stream has unknown sequences for aOptions.charset,
// throw NS_ERROR_ILLEGAL_INPUT.
aOptions.replacement = 0;
}
cis.init(aInputStream, aOptions.charset, aCount,
aOptions.replacement);
let str = {};
cis.readString(-1, str);
cis.close();
return str.value;
}
catch (e) {
// Adjust the stack so it throws at the caller's location.
throw new Components.Exception(e.message, e.result,
Components.stack.caller, e.data);
}
}
let sis = Cc["@mozilla.org/scriptableinputstream;1"].
createInstance(Ci.nsIScriptableInputStream);
sis.init(aInputStream);
try {
return sis.readBytes(aCount);
}
catch (e) {
// Adjust the stack so it throws at the caller's location.
throw new Components.Exception(e.message, e.result,
Components.stack.caller, e.data);
}
},
/**
* Returns a reference to nsIIOService.
*
* @return a reference to nsIIOService.
*/
get ioService()
{
delete this.ioService;
return this.ioService = Cc["@mozilla.org/network/io-service;1"].
getService(Ci.nsIIOService);
},
};