gecko/hal/Hal.h

204 lines
6.7 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et ft=cpp : */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Code.
*
* The Initial Developer of the Original Code is
* The Mozilla Foundation
* Portions created by the Initial Developer are Copyright (C) 2011
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Chris Jones <jones.chris.g@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef mozilla_Hal_h
#define mozilla_Hal_h 1
#include "mozilla/hal_sandbox/PHal.h"
#include "base/basictypes.h"
#include "mozilla/Types.h"
#include "nsTArray.h"
#include "prlog.h"
#include "mozilla/dom/battery/Types.h"
#include "mozilla/dom/network/Types.h"
/*
* Hal.h contains the public Hal API.
*
* By default, this file defines its functions in the hal namespace, but if
* MOZ_HAL_NAMESPACE is defined, we'll define our functions in that namespace.
*
* This is used by HalImpl.h and HalSandbox.h, which define copies of all the
* functions here in the hal_impl and hal_sandbox namespaces.
*/
class nsIDOMWindow;
#ifndef MOZ_HAL_NAMESPACE
# define MOZ_HAL_NAMESPACE hal
# define MOZ_DEFINED_HAL_NAMESPACE 1
#endif
namespace mozilla {
namespace hal {
class WindowIdentifier;
extern PRLogModuleInfo *sHalLog;
#define HAL_LOG(msg) PR_LOG(mozilla::hal::sHalLog, PR_LOG_DEBUG, msg)
} // namespace hal
namespace MOZ_HAL_NAMESPACE {
/**
* Turn the default vibrator device on/off per the pattern specified
* by |pattern|. Each element in the pattern is the number of
* milliseconds to turn the vibrator on or off. The first element in
* |pattern| is an "on" element, the next is "off", and so on.
*
* If |pattern| is empty, any in-progress vibration is canceled.
*
* Only an active window within an active tab may call Vibrate; calls
* from inactive windows and windows on inactive tabs do nothing.
*
* If you're calling hal::Vibrate from the outside world, pass an
* nsIDOMWindow* in place of the WindowIdentifier parameter.
* The method with WindowIdentifier will be called automatically.
*/
void Vibrate(const nsTArray<uint32>& pattern,
nsIDOMWindow* aWindow);
void Vibrate(const nsTArray<uint32>& pattern,
const hal::WindowIdentifier &id);
/**
* Cancel a vibration started by the content window identified by
* WindowIdentifier.
*
* If the window was the last window to start a vibration, the
* cancellation request will go through even if the window is not
* active.
*
* As with hal::Vibrate(), if you're calling hal::CancelVibrate from the outside
* world, pass an nsIDOMWindow*. The method with WindowIdentifier will be called
* automatically.
*/
void CancelVibrate(nsIDOMWindow* aWindow);
void CancelVibrate(const hal::WindowIdentifier &id);
/**
* Inform the battery backend there is a new battery observer.
* @param aBatteryObserver The observer that should be added.
*/
void RegisterBatteryObserver(BatteryObserver* aBatteryObserver);
/**
* Inform the battery backend a battery observer unregistered.
* @param aBatteryObserver The observer that should be removed.
*/
void UnregisterBatteryObserver(BatteryObserver* aBatteryObserver);
/**
* Returns the current battery information.
*/
void GetCurrentBatteryInformation(hal::BatteryInformation* aBatteryInfo);
/**
* Notify of a change in the battery state.
* @param aBatteryInfo The new battery information.
*/
void NotifyBatteryChange(const hal::BatteryInformation& aBatteryInfo);
/**
* Determine whether the device's screen is currently enabled.
*/
bool GetScreenEnabled();
/**
* Enable or disable the device's screen.
*
* Note that it may take a few seconds for the screen to turn on or off.
*/
void SetScreenEnabled(bool enabled);
/**
* Get the brightness of the device's screen's backlight, on a scale from 0
* (very dim) to 1 (full blast).
*
* If the display is currently disabled, this returns the brightness the
* backlight will have when the display is re-enabled.
*/
double GetScreenBrightness();
/**
* Set the brightness of the device's screen's backlight, on a scale from 0
* (very dimm) to 1 (full blast). Values larger than 1 are treated like 1, and
* values smaller than 0 are treated like 0.
*
* Note that we may reduce the resolution of the given brightness value before
* sending it to the screen. Therefore if you call SetScreenBrightness(x)
* followed by GetScreenBrightness(), the value returned by
* GetScreenBrightness() may not be exactly x.
*/
void SetScreenBrightness(double brightness);
/**
* Inform the network backend there is a new network observer.
* @param aNetworkObserver The observer that should be added.
*/
void RegisterNetworkObserver(NetworkObserver* aNetworkObserver);
/**
* Inform the network backend a network observer unregistered.
* @param aNetworkObserver The observer that should be removed.
*/
void UnregisterNetworkObserver(NetworkObserver* aNetworkObserver);
/**
* Returns the current network information.
*/
void GetCurrentNetworkInformation(hal::NetworkInformation* aNetworkInfo);
/**
* Notify of a change in the network state.
* @param aNetworkInfo The new network information.
*/
void NotifyNetworkChange(const hal::NetworkInformation& aNetworkInfo);
} // namespace MOZ_HAL_NAMESPACE
} // namespace mozilla
#ifdef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_HAL_NAMESPACE
#endif
#endif // mozilla_Hal_h